Solid-Phase Extraction of Caffeine and Theophylline from Green Tea by a New Ionic Liquid-Modified Functional Polymer Sorbent

The new ionic liquid-modified polymer sorbent was developed by surface chemical modification of the synthesized polymer particles using ionic liquids. The obtained ionic liquid-modified polymer was successfully used as a special sorbent in a solid-phase extraction (SPE) process to isolate caffeine and theophylline from green tea. A comparison of different SPE cartridges using the blank polymer, C₁₈, and ionic liquid-modified polymer revealed that the highest recovery was obtained using ionic liquid-modified polymer sorbent. Quantitative analysis was carried out by using a C₁₈ column (5 µm, 150 × 4.6 mm) as an analytical column. Good linearity was obtained from 5 × 10^?4 to 0.5 mg/mL (r²>0.999) for the two analytes with relative standard deviations <4.5%.     

Extraction and Determination of β-Sitosterol from Salicornia herbacea L. Using Monolithic Cartridge

A short ionic liquids-based monolithic cartridge was prepared and used as the selective extraction sorbent. Characteristic and evaluation are investigated by field emission scanning electron microscopy (FE-SEM), and a new approach was developed for the extraction and determination of β-sitosterol from Salicornia herbacea L. using the ionic liquids-based monolithic cartridge. Chromatographic analysis was conducted on a C₁₈ column with UV detection at 210 nm, and an eluting solution consisting of acetonitrile–water (60/40, v/v) was used as the mobile phase at a flow rate of 0.8 mL min⁻¹. The linearity was confirmed in the concentration range of 0.50–100.00 μg mL⁻¹, with RSDs within 4.20%, and a recovery of β-sitosterol ranging from 97.20 to 102.93%. This method effectively removed the impurities without any tedious pretreatment, and it provided a fast, economic and effective way to assay trace drugs from natural plants.

     

Extraction and Determination of Quercetin and Myricetin from Chamaecyparis obtusa by Ionic Liquids‐based Monolithic Cartridge

A short ionic liquids (ILs)‐based monolithic cartridge was prepared and used as the selective extraction sorbent. After the material was evaluated by field emission‐scanning electron microscopy (FE‐SEM), a new approach for the extraction and determination of quercetin and myricetin from Chamaecyparis obtusa (C. obtusa) by using ILs‐based, monolithic cartridge system was developed. Chromatographic analysis was conducted on a C₁₈ column with UV detection at 372 nm, an eluting solution consisting of acetonitrile‐water (25/75,V/V) as the mobile phase, and a flow rate of 0.7 mL·min⁻¹. A good linear relationship was demonstrated when the concentrations of quercetin and myricetin were in the range of 0.5–100.0 µg·mL⁻¹. The recoveries ranged from 101.6% to 104.6% and the inter‐ and intra‐day relative standard deviations (RSD) were less than 5.0%. This method effectively removed the impurities and avoided tedious pretreatment. It provided a fast, economic and effective method for assaying trace drugs from natural plants.     

Evaluation of Monolithic Columns for Determination of Formaldehyde and Acetaldehyde in Sugar Cane Spirits by High-Performance Liquid Chromatography

Abstract

High-Performance Liquid Chromatography (HPLC) conditions are described for separation of 2,4-dinitrophenylhydrazone (2,4-DNPH) derivatives of carbonyl compounds in a 10 cm long C₁₈ reversed phase monolithic column. Using a linear gradient from 40 to 77% acetonitrile (acetonitrile-water system), the separation was achieved in about 10 min—a time significantly shorter than that obtained with a packed particles column. The method was applied for determination of formaldehyde and acetaldehyde in Brazilian sugar cane spirits. The linear dynamic range was between 30 and 600 µg L^?1, and the detection limits were 8 and 4 µg L^?1 for formaldehyde and acetaldehyde, respectively.     

Extraction and Determination of β-Sitosterol from Salicornia herbacea L. Using Monolithic Cartridge

A short ionic liquids-based monolithic cartridge was prepared and used as the selective extraction sorbent. Characteristic and evaluation are investigated by field emission scanning electron microscopy (FE-SEM), and a new approach was developed for the extraction and determination of β-sitosterol from Salicornia herbacea L. using the ionic liquids-based monolithic cartridge. Chromatographic analysis was conducted on a C₁₈ column with UV detection at 210 nm, and an eluting solution consisting of acetonitrile–water (60/40, v/v) was used as the mobile phase at a flow rate of 0.8 mL min^?1. The linearity was confirmed in the concentration range of 0.50–100.00 μg mL^?1, with RSDs within 4.20%, and a recovery of β-sitosterol ranging from 97.20 to 102.93%. This method effectively removed the impurities without any tedious pretreatment, and it provided a fast, economic and effective way to assay trace drugs from natural plants.     

Solid‐phase extraction of matrine and oxymatrine from Sophora Flavescens Ait using amino‐imidazolium polymer

A new, polymer‐confined, ionic liquid sorbent was developed by a process involving polymerization and modification. The obtained particles were successfully used as a special sorbent in SPE process to isolate matrine and oxymatrine from Sophora Flavescens Ait. Different washing and elution solvents, such as ethanol, methanol, acetonitrile and methanol/triethylamine (90:10, v/v), were evaluated. Compared with the C₁₈ and NH₂ sorbents, the amino‐imidazolium polymer sorbent exhibited higher selectivity. Quantitative analysis was carried out by using a C₁₈ column. The two compounds exhibited good linearity from 5×10^?3 to 0.50 mg/mL (r²>0.99). The bound amounts between target compounds and proteins were obtained by this sorbent. After three recycles of amino‐imidazolium polymer, the extract amounts of the target compounds were not significantly decreased.     

Application of Solid-Phase Extraction Coupled with Dispersive Liquid–Liquid Microextraction for the Determination of Benzaldehyde in Injectable Formulation Solutions

Solid-phase extraction followed by dispersive liquid–liquid microextraction (SPE-DLLME) technique has been developed as a new analytical approach for extracting, cleaning up and preconcentrating benzaldehyde, a toxic oxidation product of the widely used preservative and co-solvent benzyl alcohol, in injectable formulation solutions. SPE of benzaldehyde from samples was carried out using C₁₈ sorbent. After the elution of benzaldehyde from the sorbent by using acetonitrile, DLLME technique was performed on the obtained solution. Benzaldehyde was preconcentrated by using DLLME technique. Thus, 1.5 mL acetonitrile extract (disperser solvent) and 55.0 µL 1,2-dichloroethane (extraction solvent) were added to 5 mL ultra pure water and a DLLME technique was applied. Several variables that govern the proposed technique were studied and optimized. Under optimum conditions, the method detection limit (LOD) of benzaldehyde calculated as three times the signal-to-noise ratio (S/N) was 0.08 µg L^?1. The relative standard deviation (RSD) for four replicates was 5.8 %. The calibration graph was linear within the concentration range of 0.5–500 µg L^?1 for benzaldehyde. The proposed method has been successfully applied to the analysis of the benzaldehyde in injectable formulation solutions (diclofenac, vitamin B-complex and voltaren) and the relative recoveries were between 88 and 92 % and show that matrix has a negligible effect on the performance of the proposed method.     

Simultaneous Determination of Selected Veterinary Antibiotics and their Main Metabolites in Fish and Mussel Samples by High-Performance Liquid Chromatography with Diode Array-Fluorescence (HPLC-DAD-FLD) Detection

A reversed-phase high-performance liquid chromatography (RP-HPLC) method for the quantitative determination of 11 antibiotics (drugs) and the main metabolites of five of them in fish tissue and mussel samples were developed, optimized, and validated. The analytes belong to four different classes of antibiotics (sulfonamides, tetracyclines, penicillin, and amphenicols). The analyzed compounds were sulfadiazine and its N⁴-acetylsulfadiazine metabolite; sulfamethazine and its N⁴-acetylsulfamethazine; sulfamerazine and its N⁴-acetylsulfamerazine; sulfamethoxazole; trimetroprim; amoxicillin and its main metabolite amoxicilloic acid; ampicillin and its main metabolite ampicilloic acid; chloramphenicol; thiamphenicol; oxytetracycline; and chlortetracycline. For HPLC analysis, diode array and fluorescence detectors were used. The separation of the analyzed compounds was conducted by means of a C₁₈ (150 mm × 4.6 mm I.D., particle size 5 µm) analytical column with LiChrospher® C₁₈ (4 mm × 4 mm, particle size 5 µm) guard-column. Analyzed drugs were determined within 35 minutes using formic acid 0.1% in water and acetonitrile in gradient elution mode as the mobile phase. The method was applied to the determination of the analytes in tissue of hake (Merluccius merluccius), anchovy (Engraulis encrasicolus), mussel (Mytltus sp.), and wedge sole (Solea solea). The proposed method was also evaluated by a laboratory assay consisting of the determination of the targeted analytes in samples of Cyprinus carpio that were previously administered controlled doses of the antibiotics.     

Polythionine-decorated magnetic nanoparticles as a robust and highly effective sorbent for mercury determination in environmental water samples

Extraction, pre-concentration and determination of trace amounts of mercury ions from water samples were investigated by magnetic solid phase extraction (MSPE) method using Fe₃O₄ nanoparticles decorated with polythionine as an adsorbent. A simple chemical synthesis by catalytic reaction of thionine in the presence of FeCl₃ and hydrogen peroxide was used for preparation of the magnetic sorbent. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, vibrating sample magnetometer analysis and Fourier transform infrared spectroscopy were used to characterise the adsorbent. Mercury ions were determined by cold vapour atomic absorption spectrometry. The parameters for MSPE procedure, such as pH of the extraction solution, adsorption time, weight adsorbent, elution conditions (type, concentration and volume of the eluent), volume of the sample solution and effects of coexisting ions were investigated. The obtained optimal conditions were: sample pH of 4; sorbent amount of 4 mg; sorption time of 20 min; elution solvent of HNO₃ (0.3 mol L^?1)/thiourea (2% w/v) with volume of 2 mL, and breakthrough volume of 400 mL. A good linearity in the concentration range of 0.025–40 µg L^?1 (R² > 0.999) with the pre-concentration factor of 198 was obtained. The limits of detection and quantification were achieved as 0.008 and 0.025 µg L^?1, respectively. Furthermore, sea and river water samples were analysed and good recoveries (97.1–99.6%) were obtained.     

Use of ionic liquid based chitosan as sorbent for preconcentration of fluoroquinolones in milk,egg, fish,bovine, and chicken meat samples by solid phase extraction prior to HPLC determination

The possibility of using ionic liquid based chitosan sorbent for the separation and preconcentration of fluoroquinolone antibiotics (marbofloxacin, enoxacin, ofloxacin, ciprofloxacin, and enrofloxacin) has been studied. For this reason, different ionic liquids were prepared and coated on the chitosan sorbent. The conditions of the preconcentration of fluoroquinolones on a microcolumn have been optimized and the extraction efficiencies of the prepared sorbents have been compared. The compounds were eluted with 5 mL of 20% NH₃ (v/v, MeOH) solution and determined by HPLC with diode array and fluorescence detector. The limits of detection were found as 4.23 µ g L^?1 for marbofloxacin, and 1.09 µg L^?1 for enoxacin; 3.23 × 10^?3 µg L^?1 for ofloxacin; 8.39 × 10^?3 µg L^?1 for ciprofloxacin; and 19.50 × 10^?3 µg L^?1 for enrofloxacin. The developed method was applied for the analysis of fluoroquinolone in milk, egg, fish, bovine, and chicken samples and the recoveries were obtained in the range 70–100%.     

Custom-Made C18 Column for Simultaneous Determination of Endocrine Disrupting Substances in Water by Diode-Array and Fluorescence Detectors

A C₁₈ stationary phase was synthesized for a custom-made HPLC column. When compared to a commercial C₁₈ column, better chromatographic performances were obtained. This column was successfully applied for simultaneous determination of p,p′-DDT, o,p′-DDT, benzo(a)anthracene, benzo(b)fluoranthene, and benzo(a)pyrene in waters by high performance liquid chromatography coupled with dual detectors (diode array and fluorescence detectors) combined with solid phase extraction. Low method detection limits were obtained, i.e., p,p′-DDT: 0.5 µg L^?1, o,p′-DDT: 1 µg L^?1, benzo(a)anthracene: 2.5 ng L^?1, benzo(b)fluoranthene: 5 ng L^?1, and benzo(a)pyrene: 2.5 ng L^?1. High recoveries that ranged from 82 to 94% were obtained for all compounds.     

SPE of Tanshinones from Salvia miltiorrhiza Bunge by using Imprinted Functionalized Ionic Liquid-Modified Silica

Ionic liquid-modified silica, with functional groups based on imidazole as the cation, was obtained. A molecular imprinting technique was introduced to form the order of functional groups. The selectivity of the obtained ionic liquid-modified silica was successfully used as a special imprinted sorbent in the solid-phase extraction to isolate cryptotanshinone, tanshinone I and tanshinone IIA from Salvia miltiorrhiza Bunge. Several washing and elution solvents with different polarities were evaluated. The ionic liquid-modified silica as the sorbent exhibited a higher selectivity than blank ionic liquid-modified silica, traditional silica and C₁₈ cartridges. A quantitative analysis was conducted by liquid chromatography with a C₁₈ column and methanol/water (75:25, v/v, containing 0.5% acetic acid) as the mobile phase. A good linearity was obtained from 0.5 × 10^?4 to 0.1 mg mL^?1 (r ²  > 0.99) with relative standard deviations that were less than 4.6%.     

Development of solid-phase extraction method for the determination of aromatic sensitisers in paper mill effluent

In this paper, a procedure for the determination of 11 aromatic hydrocarbon-type sensitisers and their related compounds from water samples, used in the manufacture of thermal paper, is presented. The compounds were extracted using a solid-phase extraction (SPE) cartridge with an octadecyl (C18) or a phenyl-bonded silica (PH) sorbent and then determined by gas chromatography–mass spectrometry (GC–MS). Factors affecting the performance of the extraction steps were thoroughly evaluated, and their effects on the yield of the sample preparation were discussed. Under optimised experimental conditions, SPE cartridges were conditioned with 10?mL hexane followed subsequently by 10?mL methanol, loaded with water sample at 2?mL?min^?1, and eluted with 10?mL hexane at 1.5?mL?min^?1. The limits of detection and quantification, calculated for signal-to-noise ratios of 3 and 10, were in the range of 1–5?µg?L^–1 and 2.5–10?µg?L^–1, respectively. Recovery yields of the present method using river water were in the range of 88%–112% with a C18 sorbent and 86%–116% with a PH sorbent. The repeatability, expressed as a relative standard deviation, was in the range of 2.8%–11% with a C18 sorbent and 0.7%–9.7% with a PH sorbent (n?=?4). Analysis of paper mill effluents revealed the presence of aromatic hydrocarbon-type sensitisers with maximum concentrations of up to 5.2?µg?L^?1.     

The chromatographic assay of 4‐hydroxynonenal as a biomarker of diseases by means of MEPS and HPLC technique

The aim of this study was to develop and validate a new analytical method for the determination of 4‐hydroxy‐2‐nonenal (4‐HNE) in biological samples while applying microextraction by packed sorbent as a sample preparation method and HPLC with UV–vis detection. Various microextraction by packed sorbent (MEPS) sorbents like C₂, C₈, C₁₈, M1 (80% C₈ and 20% SCX) and silica were used to separate 4‐HNE from biological samples. The highest affinity of 4‐HNE was observed for sorbents like C₁₈. The extraction efficiency was in the range from 47.4 to 89.2% dependent on the concentration of 4‐HNE. Lower efficiency of 4‐HNE extraction was obtained with use of MEPS packings such as C₈ and M1. The extraction efficiency was in the range from 35.2 to 66.3% for packing C8 and from 34.2 to 64.3% for packing M1, respectively. The limit of detection and lower limit of quantitation for UV–vis detection were respectively 4.5 and 9.0 nmol/mL. The proposed method can be used for the evaluation of extraction efficiency of 4‐HNE in biological sample because the values of lower limit of quantitation are lower than the determined amounts of the analyte in samples. The method yields excellent performance of quantification and identification in analysis of inflammation biomarkers. Copyright © 2014 John Wiley & Sons, Ltd.     

Magnetic solid-phase extraction to preconcentrate trace amounts of gold (III) using nickel ferrite magnetic nanoparticles

In this research, nickel ferrite (NiFe₂O₄) magnetic nanoparticles were synthesised by a simple method and applied as sorbent for magnetic solid-phase extraction of trace amounts of Au(III) from water samples. Detection in this technique was performed by flame atomic absorption spectrometry. The effects of sample pH, amount of sorbent, extraction time, desorption solvent and its volume on the extraction process were optimised. The effects of interfering ions on the recovery of the analyte were also evaluated in model solutions. The best results were obtained at pH 6.5 with 5 mL of eluent solution (0.1 mol L^?1 sodium thiosulphate) and an extraction time of 30 min. Under optimal conditions, the sorption capacity was 34.6 mg g^?1. Also, enhancement factor (for 100 mL of sample solution) was found to be 19.3. The calibration graph was linear in the range of 4.4–800.0 µg L^?1 gold concentration and the limit of detection was 1.32 µg L^?1. The relative standard deviation of the method (for n = 8) was 1.57%. The method was successfully applied to the extraction of Au(III) from water samples.     

Solid Phase Extraction and Determination of Lead in Water Samples Using Silica Gel Homogeneously Modified by Thiosalicylic Acid

Abstract

Silica gel was modified by thiosalicylic acid via homogeneous routes to obtain immobilized silica gel sorbent (TSA‐immobilized silica gel). This new sorbent was characterized using variety of physical chemistry techniques including, high resolution solid state ¹³C and ²⁹Si CP/MAS NMR, X‐ray photoelectron spectroscopy (XPS), thermal analysis (TGA and DTA), elemental analysis, and BET surface analysis as well as infrared spectroscopy (FTIR). New support was used for the selective extraction and concentration of lead ions by silica gel modified with thiosalicylic acid, as a highly selective and stable reagent, from aquatic samples and its determination with FAAS. Lead ions can be desorbed with 4 mol dm^?3 HNO₃. The sorption capacity for lead ions are found in the range of 64.40 to 69.90 µmol g^?1 of chelating matrix. Tolerance limits for electrolytes and some trace metals in the sorption of lead is reported. Preconcentration factor was found as 150 for Pb(II). The lead in drinking water, mineral water, tap water, and fruit juice was quantitatively recovered with a relative standard deviation lower than 1.50%. A detection limit of the method for lead ions was found as 3.7 µg l^?1.     

Polyaniline-coated magnetite nanoparticles incorporated in alginate beads for the extraction and enrichment of polycyclic aromatic hydrocarbons in water samples

A magnetic solid-phase extraction sorbent consisting of polyaniline-coated magnetite nanoparticles entrapped in alginate beads (PANI/alginate/Fe₃O₄) was successfully synthesised and applied for the extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) in water samples. The magnetite nanoparticles helped to provide an easy and rapid isolation of the sorbent from the sample solution using an external magnet. The alginate beads helped to increase the surface area for polyaniline coating. The polyaniline-coated alginate/magnetite composite helped to increase the extraction efficiency due to the π–π interactions between the polyaniline and the PAHs. Various parameters that affected the extraction efficiencies were optimised including the polymerisation time, the amount of sorbent, sample pH, extraction time, ionic strength, and desorption conditions. Under the optimal conditions, a linear response was achieved in the concentration range of 0.040–50.0 µg L^?1, and the limit of detection was 0.010 µg L^?1. This simple, convenient, cost-effective, and environmentally friendly method was successfully applied for the extraction and enrichment of PAHs in water samples. The recoveries ranged from 86.0% to 97.8% with a relative standard deviation <10 %.     

Development of a Flow Injection Manifold for Napropamide Determination by Photo-Induced Chemiluminescence

A new, rapid, and simple method is proposed for the determination of the pesticide napropamide by photo-induced chemiluminescence detection coupled with a flow injection analysis (FIA) system. The emission was obtained by oxidation with periodate in basic medium, of the photoproducts generated on-line by UV irradiation (254 nm) of napropamide in acidic SDS (sodium dodecyl sulfate) medium. The flow method, in combination with the solid phase extraction (SPE) performed off-line with C₁₈ cartridges, allowed the determination of this pesticide over the 0.8–14.0 µ gL^?1 range, with a limit of detection of 0.3 µ gL^?1. The relative standard deviation (n = 9) at 2.5 µ gL^?1 level was 4.3% for the combined FIA-SPE system. After testing the influence of several potential interfering compounds, including ions and other pesticides, the method was successfully applied to the determination of napropamide in spiked water samples with recoveries between 96–103%.     

Zinc Ion Doped Solid-Phase Extraction of Eicosapentaenoic Acid and Docosahexaenoic Acid from Antarctic Krill

Antarctic krill crude extracts contain high levels of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA). Accordingly, the solid phase extraction of EPA and DHA from Antarctic krill crude extracts has attracted significant research interest. This study compared the extraction of EPA and DHA from Antarctic krill crude extracts using an aminopropyl, zinc ion-doped silica, and C₁₈ and zinc ion-doped C₁₈ solid-phase column. The best extraction effect was obtained using the zinc ion-doped C₁₈ SPE with water containing methanol as the eluant. The efficiency increased gradually with increasing methanol concentration from 12.5 to 25% in the washing stage, and when pure methanol (5.0 mL) or acetonitrile (3.0 mL) was used as the eluant. To detect EPA and DHA, the acids were first converted to their methyl esters and detected by gas chromatography with flame ionization detection (GC–FID). In the zinc ion-doped C₁₈ elution fractions, EPA and DHA were isolated from the crude extracts in high yield (85–91% (r² = 4.8–6.3%)).     

Sol–gel niobia sorbent with a positively charged octadecyl ligand providing enhanced enrichment of nucleotides and organophosphorus pesticides in capillary microextraction for online HPLC analysis

A niobia‐based sol–gel organic–inorganic hybrid sorbent carrying a positively charged C₁₈ ligand (Nb₂O₅‐C₁₈(+ve)) was synthesized to achieve enhanced enrichment capability in capillary microextraction of organophosphorus compounds (which include organophosphorus pesticides and nucleotides) before their online analysis by high‐performance liquid chromatography. The sorbent was designed to simultaneously provide three different types of molecular level interactions: electrostatic, Lewis acid–base, and van der Waals interactions. To understand relative contributions of various molecular level analyte–sorbent interactions in the extraction process, two other sol–gel niobia sorbents were also created: (a) a purely inorganic sol–gel niobia sorbent (Nb₂O₅) and (b) an organic–inorganic hybrid sol–gel niobia sorbent carrying an electrically neutral‐bonded octadecyl ligand (Nb₂O₅‐C₁₈). The extraction efficiency of the created sol–gel niobia sorbent (Nb₂O₅‐C₁₈ (+ve)) was compared with that of analogously designed and synthesized titania‐based sol–gel sorbent (TiO₂‐C₁₈ (+ve)), taking into consideration that titania‐based sorbents present state‐of‐the‐art extraction media for organophosphorus compounds. In capillary microextraction with high‐performance liquid chromatography analysis, Nb₂O₅‐C₁₈ (+ve) had shown 40–50% higher specific extraction values (a measure of extraction efficiency) over that of TiO₂‐C₁₈ (+ve). Compared to TiO₂‐C₁₈(+ve), Nb₂O₅‐C₁₈(+ve) also provided superior analyte desorption efficiency (96 vs. 90%) during the online release of the extracted organophosphorus pesticides from the sorbent coating in the capillary microextraction capillary to the chromatographic column using reversed‐phase high‐performance liquid chromatography mobile phase.