Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

New Copper(II) Ion-Selective Membrane Electrode Based on Erythromycin Ethyl Succinate as a Neutral Ionophore

Abstract

The potentiometric response characteristics of a new copper(II) ion-selective PVC membrane electrode based on erythromycin ethyl succinate (EES) as ionophore were investigated. The electrode exhibited a Nernstian response to Cu²⁺ ions over the activity range of 1.5 × 10^?2 to 2.0 × 10^?6 mol L^?1 with a limit of detection of 6.3 × 10^?7 mol L^?1. Stable potentials were obtained in the pH range of 5.5–6.5. The potentiometric selectivity coefficients were calculated by using fixed interference method and revealed no important interferences except for Ag⁺. This electrode was successfully applied as an indicator electrode in determination of copper ions in real water samples.     

Carbon Paste Electrode Modified with Functionalized Nanoporous Silica Gel as a New Sensor for Determination of Silver Ion

A new dipyridyl‐functionalized silica gel (DPSG) was synthesized. The potentiometric response of silver ion was investigated at a carbon paste electrode chemically modified with functionalized nanoporous silica gel. The electrodes with a DPSG proportions of 10.1% (w/w), showed very stable potential. Calibration plots with Nernstian slopes for Ag⁺ were observed, 58.7 (±0.9) mV decade^?1, over a wide linear range of concentration (5.0×10^?7 to 1.0×10^?1 M). The electrode has a detection limit of 1.0×10^?7 M. The selectivity coefficients measured by the match potential method in acetate buffer, pH 5.5, were investigated. The electrode has fast response time, high performance, high sensitivity in wide cation activity ranges, and good long term stability (more than 6 months). The method was satisfactory and used to determine the concentration of silver ion in waste waters contaminated by this metal.     

Efficient Synthesis of a New Podand and Application as a Suitable Carrier for Silver Ion‐Selective Electrode

A new podand of 1,1′‐thia‐bis‐[1‐(chloroethan‐2‐acetamid‐α‐oxy)] naphtol was synthesized and used as a suitable carrier for Ag⁺ PVC membrane electrode. The electrode exhibited linear response with a Nernstian slope of (59.5±0.8 mV/decade) within a wide concentration range of 1.0×10^?7 to 1.5×10^?2 mol L^?1 silver ions. The electrode had a fast response time of <10 s and detection limit of 8.6×10^?8 mol L^?1 with a working pH range from 3.7 to 9.0. The electrode was highly selective for Ag(I) ions over a large number of cations such as alkali, alkaline earth, and heavy metal ions. The proposed sensor has been applied as an indicator electrode for indirect determination of vitamin B₁ in tablets by determination of Cl^? ions in this compound with a standard solution of Ag(NO₃).     

All-Solid-State PVC Membrane Ag+-Selective Electrodes Based on Diaza-18-Crown-6 Compounds

Two diaza-crown ether compounds were synthesized and evaluated as Ag⁺-selective carriers in polyvinylchloride (PVC) membrane electrodes of solid-state type. The all-solid-state PVC membrane electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 exhibited a super-Nernstian response (75±10mV per decade) over the concentration range of 1×10^–1 to 7×10^–6M of Ag⁺ ion and a detection limit of 3×10^–6M, at a wide range of pH (pH 4–7). The response time of the electrode was fast (less than 10s), and it can be used for three months without any significant deviation in potential. The proposed all-solid-state PVC membrane electrodes revealed high selectivity toward Ag⁺ ion with respect to alkali, alkaline earth, heavy and transition metal ions. A flow-through cell of all-solid-state PVC membrane Ag⁺-selective electrode based on N,N-Dibenzyl-dibenzo-diaza-18-crown-6 has also been prepared and applied for flow-injection analysis of Ag⁺ ion in solution.     

Cationic Surfactant Ion-Selective PVC Membrane Electrode Containing Macrocyclic Diimine Crown Ether

ABSTRACT

DP⁺ ion-selective PVC membrane electrode based on 2,3,11,12-dibenzo-5,9-diaza-4,9(10)-cis-diimino-1,13-dioxacyclopentadecane as a novel macrocyclic diimine crown ether is proposed. o-Nitrophenyl octyl ether as plasticizer and potassium tetrakis(4-chlorophenyl)borate as lipophilic salt were used. The electrode exhibits a Nernstian response for 1.0 x 10^?2-1.0 x 10^?6 mol 1^?1 DPCl with a slope of 58 mVdecade^?1. The detection limit is 2.5 x 10^?7 mol 1^?1. The electrode response was stable over a wide pH range (3-11). The lifetime of the electrode was about 2 months. The electrode shows a high selectivity towards inorganic cations. Among the organic cations tested, only hexadecyltrimethylammonium ion interferes. The electrode was suitable for determining the critical micelle concentration and as an end-point detector in the potentiometric titration of the cationic surfactants.     

Calix[2]furano[2]pyrrole and related compounds as the neutral carrier in silver ion-selective electrode

The performance of calix[2]furano[2]pyrrole and related compounds used as neutral carriers for silver selective polymeric membrane electrode was investigated. The silver ion-selective electrode based on calix[2]furano[2]pyrroles gave a good Nernstian response of 57.1 mV per decade for silver ion in the activity range 1×10⁻⁶ to 1×10⁻² M. The present silver ion-selective electrode displayed very good selectivity for Ag⁺ ion against alkali and alkaline earth metal ions, NH₄⁺, and H⁺. In particular, the present Ag⁺-selective electrode exhibited very low responses towards Hg²⁺ and Pb²⁺ ions. The potentiometric selectivity coefficients of the silver ion-selective electrode exhibited a strong dependence on the solution pH. In particular, the response of the electrode to the Hg²⁺ activity was greatly diminished at pH 2.5 compared to that at pH 5.0. Overall, the performance of the present silver ion-selective electrode based on the ionophore, calix[2]furano[2]pyrrole, is very comparable to that of the electrode prepared with the commercially available neutral carrier in terms of slope, linear range, and detection limits.     

Anodic stripping voltammetric determination of silver(I) in water using a 4-tert-butyl-1(ethoxycarbonylmethoxy)thiacalix[4]arene modified glassy carbon electrode

A glassy carbon electrode coated with film of 4-tert-butyl-1-(ethoxycarbonylmethoxy)thiacalix[4]arene is designed for the determination of trace amounts of Ag⁺. Compared with bare glassy carbon electrode, the modified electrode can greatly improve the measuring sensitivity for Ag⁺. Under the optimum experimental conditions, the modified electrode in B-R buffer solution (pH 4.5) shows a linear voltammetric response in the range of 5.0 × 10⁻⁸–3.0 × 10⁻⁶ M with detection limit 1.0 × 10⁻⁸ M for Ag⁺. The high sensitivity, selectivity, and stability of modified electrode also demonstrate its practical application for a simple, rapid and economical determination of Ag⁺ in water samples.     

Electrochemistry and Ion Sensing Properties of Conducting Hydrogel Layers Based on Polypyrrole and Alkoxysulfonated Poly(3,4‐ethylenedioxythiophene) (PEDOT‐S)

Acidic aqueous solutions containing pyrrole and alkoxysulfonated PEDOT derivative (PEDOT‐S) were found to undergo polymerization in the absence of an external oxidizing agent. The product was a nearly black‐colored conducting hydrogel that after separation could be dispersed in water or acetone. The suspensions could be used to deposit cast films on a polycrystalline gold electrode. The polymer modified electrode showed a nearly Nernstian potentiometric response to Ag⁺ cations in the concentration range of 10^?5–10^?1 M with the slope of 54 mV/decade. The response was specific to Ag⁺ compared to a series of alkali and transition‐metal cations (pK_Ag/M>3.7).     

Lead(II)-Selective Membrane Electrode Based on Tetraphenylporphyrin

ABSTRACT

A PVC membrane electrode for Pb² ions based on tetraphenylporphyrin was prepared. The sensor exhibits a Nernstian response for lead ions over a wide concentration range (1.0 x 10^?5-1.0 x 10^?2 M). The limit of detection is 8.5 x 10^?6M. It has a response time of 15 s and can be used for at least three months without any divergence in potential. The proposed electrode shows a fairly good discriminating ability towards Pb² ion in comparison to some alkali, alkaline earth, transition and heavy metal ions. The electrode can be used in the pH range 5.0 to 7.5. It was used as an indicator electrode in potentiometric titration of lead ion.     

The electrode modified with Langmuir–Blodgett film of p-tert-butylcalix[4]arene derivatives with sulfur-containing functionalities for the determination of silver

A new voltammetric sensor, based on a new p-tert-butylcalix[4]arene derivative (TCAD) modified glassy carbon electrode (GCE) using Langmuir–Blodgett (LB) technique, was designed successfully and used for recognition and determination of Ag⁺. The π?-?A isotherms suggested that the monolayer of TCAD can coordinate with Ag⁺ at the air–water surface. Under the optimum experimental conditions, this voltammetric sensor shows a linear voltammetric response for Ag⁺ in the range of 1.0?×?10^?8?～?6.0?×?10^?6?mol?L^?1 with detection limit 5.0?×?10^?9?mol?L^?1. The high sensitivity, selectivity, and stability of this LB film modified electrode also demonstrate its practical application for a simple, rapid and economical determination of Ag⁺ in water sample.     

Mixed Aza‐Thioether Crowns Containing a 1,10‐Phenanthroline Sub‐Unit as Neutral Ionophores for Silver Ion

Three different recently synthesized aza‐thioether crowns containing a 1,10‐phenanthroline sub‐unit (L1–L3) and a corresponding acyclic ligand (L4) were studied to characterize their abilities as silver ion ionophores in PVC‐membrane electrodes. Novel conventional silver‐selective electrodes with internal reference solution (CONISE) and coated graphite‐solid contact electrodes (SCISE) were prepared based on one of the 15‐membered crowns containing two donating S atoms and two phenanthroline‐N atoms (L1). The electrodes reveal a Nernstian behavior over wide Ag⁺ ion concentration ranges (1.0×10^?5?1.0×10^?1 M for CONISE and 5.0×10^?8?4.0×10^?2 M for SCISE) and very low limits of detection (8.0×10^?6 M for CONISE and 3.0×10^?8 M for SCISE). The potentiometric response is independent from pH of the solution in the pH range 3.0–8.0. The electrodes manifest advantages of low resistance, very fast response and, most importantly, good selectivities relative to a wide variety of other cations. The electrodes can be used for at least 2 months (for CONISE) and 4 months for (SCISE) without any appreciable divergence in potentials. The electrodes were used as an indicator electrode in the potentiometric titration of Ag⁺ ion and in the determination of silver in photographic emulsions and in radiographic and photographic films.     

Determination of Fluoride Ions in Mouthwash Samples by a PVC Membrane Samarium(III) Sensor

Abstract

In this study, a new ion-selective electrode for Sm³⁺ is described, illustrating 2-[(E)-1-(1H-pyrrol-2-yl)methylidene]-1-hydrazinecarbothioamide (PMH) in a poly(vinylchloride) (PVC) membrane with nitrobenzene (NB) as a plasticizer and sodium tetraphenyl borate (NaTPB) as an anionic additive. The proposed sensor exhibited a Nernstian response for Sm³⁺ ions over a wide concentration range between 1.0 × 10^?2 and 1 × 10^?6 M, with a detection limit of 5.2 × 10^?7 M in the pH range of 4.2–8.5. Moreover, the sensor displayed the Nernstian slope of 19.8 ± 0.3 mV per decade, having a fast response time within 10 s over the entire concentration range. This electrode presented very good selectivity and sensitivity toward the Sm³⁺ ions over a wide variety of cations, including alkali, alkaline earth, transition-metal, and heavy-metal ions. It was used as an indicator electrode in the potentiometric titration of Sm³⁺ ions with EDTA. The membrane sensor was also applied to the determination of fluoride ions in mouthwash samples.     

1‐Pyrrolidine Dicarbodithioate Based Electrodes for Determination of Iron(III) in Lubrication Oil

The lipophillic ammonium salt of 1‐pyrrolidine dicarbodithioic acid (PCDT) (I) was introduced as a new selective ionophore for an iron selective electrode. In addition, the effect of immobilization of 18‐crown‐6 (18CE6) (membrane type‐II), on the electrode performance was discussed. The slope of the PCDT‐based (I) electrode was (20 mV/decade). The linear concentration range was (10^?5–10^?1 M) after one day doping. The detection limit for electrode type‐(II) was (1.3×10^?6 M). For membrane with only 18CE6 (type‐III) the linear range and the detection limit were improved (10^?5–10^?1 M and 3.2×10^?6 M, respectively). The pH‐range was between 5–11 for type‐II, and III electrodes, while it was 7–11 for type‐I electrode. Most of the common cations were tested for the evaluation of the electrode selectivity with correlation to the ionic radii of the tested cations. Among them only Ag⁺ and Pb²⁺ were the real interference for type‐III electrode. Application of using the electrode for the determination of iron in lubrication oil samples was performed with RSD (1.77–2.7%) and (1.01–2.3%) for type‐II and III electrodes, respectively. The corresponding recovery ranges were (93.0–99.9%) and (96.3–100%). The obtained results were compared to those of an atomic absorption spectrophotometric method.     

Silver Selective Electrode Based on Hybrid Mesoporous Silica (MCM‐41) Modified Material

A silver selective electrode based on TEPQA‐MCM‐41 material was developed and used for the selective determination of Ag⁺ ion in various samples. The effect of various plasticizers i. e. dimethyl phthalate (DMP), Tris(ethylhexyl)phosphate (TEP), bis‐(2‐ethylhexyl)sebacate (BEHS), bis‐(2‐ethylhexyl)adipate (BEHA) was investigated. The electrode of the composition of 2 : 1 : 77 : 12 : 8 (w/w, %) of TEPQA‐MCM‐41 : NaTPB : Graphite powder : paraffin oil : DMP respectively, works satisfactorily in a wide concentration range of 1.3×10^?9 M–1.0×10^?1 M for Ag⁺ ion with a lower detection limit (LOD) of 1.0×10^?9 M and has Nernstian slope of 63.4 1 mV/decay. The electrode can be used in a pH range of 2.3 to 6.7 for a period of 3 months without any divergence in potential response. The selectivity coefficient calculated by fixed interference method indicates the high selectivity of the electrode towards Ag⁺ ion over other tested cations.     

The Potential Response Of Copper(Ii) Sulfide Ion Selective Electrode To Hg(Ii) Ions In Aqueous Solution

Abstract

The application of a cupric ion-selective electrode with a membrane of mixed Ag₂S-CuS to measure the activity of Hg(II) is presented. The linear electrode response curve which covers near three decades, from 10^?5 to 10^?2 mol dm^?3, of mercuric concentration range was obtained, under background of acetate buffer.     

Ion-Selective Electrode for the Determination of Furaltadone

ABSTRACT

A Furaltadone (FD) ion-selective PVC membrane electrode based on the ion-pair complex of FD with sodium tetraphenylborate was prepared with dioctyl phthalate as a plasticiser. The electrode exhibits a linear response with an approximate Nernstian slope (50 mV decade^?1 at 20 ⁰C) with the concentration range 2.18 x 10^?5–2.18 x 10^?4 FD. The effects of ionic strength and pH of the test solution on the electrode performance were studied. The electrode exhibited very good selectivity for FD with respect to a large number of inorganic and organic cations of biological importance. The standard addition method and potentiometric titration were used to determine the FD in pure solution and in pharmaceutical preparations with satisfactory results.     

Electrocatalytical Oxidation and Determination of Dopamine at Redox Polymer/Nafion Modified Electrodes

ABSTRACT

The modified glassy carbon electrodes prepared by simultaneously covering with [Os(bpy)₂(PVP)₁₀Cl]⁺ redox polymer and Nafion film exhibited excellent electrocatalytic activity for the oxidation of dopamine (DA). Dual linear regions between 1.0x10^?8-1.8x10^?5 M and 1.8x10^?5-4.0x10^?4 M with correlation coefficients of 0.998 and 0.995, respectively, were obtained for log-log plots of catalytic current versus DA concentration. The detection limit for DA determination was ca. 5 nM with 3σ. The dual-film modified electrodes eliminated efficiently the interference from AA presence in a 1000-fold concentration ratio and showed excellent reproducibility for the determination of DA. The modified electrodes have been used to determine DA concentration with both cyclic voltammetric and chronoamperometric techniques. Electrocatalytic kinetics have been studied using a rotating disk electrode. Both the addition of Nafion film and an increase in DA concentration resulted in a decrease in the electrocatalytic rate constant. An apparent Michaelis-Menten constant of 1.3 mM and maximum catalytic current of 88μA were evaluated from the chronoamperometric measurements.     

Silver-Selective Electrode Based on a Direct Modified Electrode Silver Hexacyanoferrate(II) Film

ABSTRACT

A silver hexacyanoferrate(II) modified electrode is introduced as a silver-selective electrode. The electrode was prepared based on a new type of chemically modified electrodes by direct modification of the electrode surface. The electrode response characteristics were investigated by potentiometry. The calibration curve of the electrode shows a linear potentiometric response to Ag⁺ in the range of 10^-7 - 10^-2 M with detection limit of 5 × 10^-8. The modified electrode described in this paper is very simple, low cost and has linear response to Ag⁺ with a slope of 52-55 mV per decade.     

Electrochemical metal-ion sensor based on a cobalt phthalocyanine complex captured in Nafion® on a glassy carbon electrode

This article describes an electrochemical metal-ion sensor based on a cobalt phthalocyanine (CoPc) complex and determination of its sensor activity for some transition metal ions. Ag⁺ and Hg²⁺, among several transition metal ions, coordinate to the sulfur donors of CoPc and alter the electrochemical responses of CoPc in solution, indicating possible application of the complex as Ag⁺ and Hg²⁺ sensor. For practical application, CoPc was encapsulated into a polymeric cation exchange membrane, Nafion, on a glassy carbon electrode and used as an electrochemical coordination element. This composite electrode was potentiometrically optimized and potentiometrically and amperometrically characterized as transition metal-ion sensors with respect to reproducibility, repeatability, stability, selectivity, linear concentration range, and sensitivity. A µmol?dm^?3 sensitivity of the CoPc-based sensor indicates its possible practical application for the determination of Ag⁺ and Hg⁺² in waste water samples.