Hydroxy Naphthol Blue as a Spectrophotometric and Fluorometric Reagent for the Uranyl Ion

Abstract

The utility of hydroxy naphthol blue (HNB) as a spectrophotometric and fluorometric reagent for the uranyl ion has been investigated. In phthalate buffer (at a pH of 4.0), UO₂ ²⁺ forms a brown complex of low absorptivity with the red form of HNB. By following the decrease in HNB absorbance at 530 nm (which has ε = 4.1 × 10³) uranyl ion can be determined to levels as low as 1.1 × 10^?6 M (0.30 μg/ml). HNB also emits at 460 nm when excited at 365 nm at these pH values, while the UO₂ ²⁺ complex exhibits greatly reduced emission. Examination of the quenching of HNB emission by UO₂ ²⁺ allows the determination of uranyl ion to levels as low as 3.2 × 10^?6 M (0.86 μg/ml). A 1:1 type complex was formed between UO₂ ²⁺ and HNB, and a formation constant of 9.77 × 10³ (log K₁ = 3.99) was measured for the complex.     

Stability Constants for Dimercaptosuccinic Acid with Bismuth(III), Zinc(II), and Lead(II)

Abstract

Stability constants for the complexation of zinc(II), lead(II), and bismuth(III) by the vicinal dithiolate chelating agent meso-dimercaptosuccinic acid (DMSA) have been determined by a combination of potentiometric titration and spectrophotometric competition at 25°C and 0.1 M ionic strength. The spectrophotometric studies use the shifts in the ultraviolet bands of the thiol groups to quantitate metal binding to DMSA in the presence of competitive aminocarboxylic acids. Bismuth(III) forms a bis(DMSA) chelate with an exceptionally high stability constant of 10^43,87. This complex undergoes a series of protonations over the pH range 10 to 2, but there appears to be no measurable dissociation of ligand over this pH range. The zinc-DMSA system is dominated by a Zn₂(DMSA)₂ dimer, which has a protonation constant of 10⁶ and dissociates completely at lower pH. No more than 20% of total zinc exists as a monomeric complex at any pH. Lead forms a 1:1 complex with a stability constant of 10^17,4. Insoluble protonated lead complexes precipitate at pH < 6.5. Speciation calculations have been used to evaluate the potential competition from serum zinc to the binding of Pb²⁺ and Bi³⁺ by DMSA. The results indicate that DMSA should be relatively effective for the in vivo chelation of both Bi³⁺ and Pb^{2 +}.     

Templated Synthesis of Copper(II) Azacyclam Complexes Using Urea as a Locking Fragment and Their Metal‐Enhanced Binding Tendencies towards Anions

Copper(II) azacyclam complexes 3 ²⁺ and 4 ²⁺ were obtained through a metal‐templated procedure involving the pertinent open‐chain tetramine, formaldehyde and a phenylurea derivative as a locking fragment. Both metal complexes can establish interactions with anions through the metal centre and the amide NH group. Equilibrium studies in DMSO by a spectrophotometric titration technique were carried out to assess the affinity of 3 ²⁺ and 4 ²⁺ towards anions. While the NH group of an amide model compound and the metal centre of the plain Cu^II(azacyclam)²⁺ complex do not interact at all with anions, 3 ²⁺ and 4 ²⁺ establish strong interactions with oxo anions, profiting from a pronounced cooperative effect. In particular, 1) they form stable 1:1 and 1:2 complexes with H₂PO₄^? ions in a stepwise mode with both hydrogen‐bonding and metal–ligand interactions, and 2) in the presence of CH₃COO^?, they undergo deprotonation of the amido NH group and thus profit from axial coordination of the partially negatively charged carbonyl oxygen atom in a scorpionate binding mode.     

Optical detection of cyanide by palladium(II)-dithiazolopyridine probe at the parts per billion level

Abstract

The ensemble of 2,6-bis(2-chlorophenyl)dithiazolo[4,5-b:5',4'-e]pyridine 1 with Pd²⁺ ions (1?Pd²⁺) was prepared for the detection of cyanide ions (CN^¯) in 50% aqueous methanol. Among the tested metal ions, only Pd²⁺ sensitively induced the red shift of the absorption bands and the complete decrease of fluorescence emission. The detection limit toward Pd²⁺ was 2?ppb. The ensemble 1?Pd²⁺ selectively and rapidly detected a low concentration of cyanide ions by a colorimetric change (40?ppb) as well as a “turn-on” fluorescent response (5?ppb). Job’s plot revealed the complex formation with 1:1 stoichiometry. The binding and replacement mode of 1?Pd²⁺ and CN^¯ were also confirmed by ¹H NMR titrations and IR analysis. In general, a fast and selective recognition of CN^¯ is reported.     

The Decomposition of Transition Metal Tetrafluoroborates by some strong Base Ligands

Abstract

Some transition metal complexes of triethylene-diamine (TED, I) and quinuclidine (Q, II) have been reported.^1–5 Recently we treated I and II with metal bistetrafluoroborates (M=Co²⁺, Ni²⁺, and Cu²⁺) which have not been studied yet, and postulated that pure coordination complexes might be obtained. However, evidence for the existence of 1:1 adducts such as C₆H₁₂N₂:BF₃ (III) and C₇H₁₃N:BF₂ (IV) in treatment of I and II with metal bistetrafluoroborates has now been found. We wish to describe our results concerning formation of these two new 1:1 adducts in this letter.     

Kinetics and Determination of Some Transition Metals with Peri-Dihydroxynaphthindenone

Abstract

A simple sensitive and selective spectrophotometric method has been developed for determination of some transition metal ions. It is based on the reaction of the metal ions with excess peri-dihydroxynaphthindenone in 80% v/v ethyl alcohol-water mixture at 30°C. The colored products obtained display maximum absorption band at 560–590 nm depending upon the type of transition metal ion used, and E_{1 cm} ^1% in the range 70–480. Under the optimum conditions results with an average recovery of 96%, (mean standard deviation ±3% are obtained for 6 different transition metal ions without any significant interference from Li⁺, Na⁺, K⁺, Cs⁺, Rb⁺, Ba²⁺, Sr²⁺, Ni²⁺, Bi³⁺, Co²⁺, Mn⁺², Cd⁺² and Al⁺³. Kinetic data reveal that the reaction proceeds via a second order route (first order with respect to either the metal cation or ligand). The activation parameters and a suggested mechanism have been presented, and the nature of bonding in the solid chelate products has been verified.     

Structural characterization of alachlor complexes with transition metal ions by electrospray ionization tandem mass spectrometry

Electrospray ionization mass (ESI-MS) spectrometry was used to investigate the nature of metal complexes of alachlor and their dissociations on activation. Ions of the first row transition metal series were employed to react with alachlor and the products were subjected to collision-induced dissociation (CID) for further structural characterization. The formation of diverse complex ions including doubly charged metal/alachlor complexes; [3L + M]²⁺ and [4L + M]²⁺ (L: alachlor and M: transition metal ions) were observed depending on the experimental conditions including the tube lens offset voltage (TLOV) and relative concentrations of alachlor and transition metal ions. It is clear that complexation with transition metal ions alters the reactive site of alachlor, promoting the loss of chlorine over the loss of CH₃OH that is the major reaction pathway in uncomplexed system. Direct elimination of chlorine from alachlor molecule was confirmed by the use of MnBr₂ instead of MnCl₂. These evidences clearly illustrate the catalytic activities of the metal ions through insertion mechanism. The function of transition metal ions in complexation was emphasized comparing the fragmentation patterns with those of protonated molecule. A change in the oxidation state of copper from + 2 to + 1 during the dissociation of metal complex was observed in company with elimination of radicals which is specific for the copper complex ions.     

Synthesis,characterization, semi-empirical study,and biological activities of organotin(IV) and transition metal complexes with o-methyl carbonodithioate

Three transition metal and six organotin(IV) complexes have been synthesized by treating potassium o-methyl carbonodithioate with ZnCl₂/CdCl₂/HgCl₂ and R₂SnCl₂/R₃SnCl under stirring. The complexes were characterized by IR, ¹H, and ¹³C NMR spectroscopies. IR results show that the ligand is bidentate in 1–3 while monodentate in 4–9, which is also confirmed by semi-empirical study. NMR data reveal four-coordinate geometry in solution. HOMO–LUMO study shows that 7 and 9 are thermodynamically unstable. The enzyme inhibition study shows that 1 is a potent inhibitor of ALP, EC 3.1.3.1, resulting in very slow rate of formation and breakdown of enzyme–substrate complex. UV/visible spectroscopy was used to assess the mode of interaction and binding of the complexes with DNA which shows that 9 exhibits higher binding constant when compared to 6. In protein kinase inhibition assay, 1 was active, while antifungal activity shows that organotin(IV) complexes are more active than transition metal complexes.     

Spectrophotometric study of complexation of dibenzopyridino-18-crown-6 with some transition and post-transition metal ions in DMSO solution using murexide as a metallochromic ligand

The complexation reaction of dibenzopyridino-18-crown-6 (DBPY 18C6) with Co²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Hg²⁺, and Ag⁺ have been studied in DMSO at 25°C by the spectrophotometric method. Murexide was used as a competitive colored ligand. The stoichiometry of metal ion-murexide and metal ions with DBPY18C6 complexes were estimated by mole ratio and continuous variation methods and emphasized by the KINFIT program. The stoichiometry of all the complexes was found to be 1: 1 (metal ion/ligand). The order of stability constants for the obtained metal ion-murexide complexes (1: 1) varies in the order Cu²⁺ > Cd²⁺ > Co²⁺ ∼ Pb²⁺ > Zn²⁺ > Ag⁺ > Hg²⁺. This trend shows that the transition metal ions clearly obey the Irving-Williams role. For the post-transition metal ions, the ionic radius and soft-hard behavior was the major affects in varying of this order. The dibenzopyridino-18-crown-6 complexes with the used metal ions vary as Ag⁺ > Pb²⁺ > Cu²⁺ > Cd²⁺ > Hg²⁺ > Zn²⁺ > Co²⁺. The article is published in the original.     

Experimental and computational studies of the binding properties of lower rim tetra- and di-substituted calix[4]arene amide derivatives with metal ions

Abstract

Experimental and theoretical binding studies of representative alkali, alkaline earth, transition, heavy metal and lanthanide cations by tetra- and di-substituted calix[4]arene amide derivatives (diethyl amide 1a–c and morpholide amide 2a–c) in the cone conformation were carried out. Binding was assessed by extraction experiments of the metal picrates from water to dichloromethane and proton NMR titrations. Density functional theory calculations were also performed to determine the binding energy of the complexes formed and to analyse the host–guest interaction modes. In the cases of ligands 1b and 2c with Na⁺ and Ag⁺ picrates, the extraction energy was also determined using the polarisable continuum model. The results are discussed in terms of the nature of the amide residue and the substitution pattern (1,3 vs. 1,2). Both tetra-amide derivatives are good extractants, showing preference for Na⁺, Ca²⁺, Ag⁺ and Pb²⁺ cations, mainly di-ethylamide 1a. Concerning di-amide derivatives, the relative position of the substituents seems to be more important than the nature of the amide group in the extraction process. Proton NMR studies indicate the formation of 1:1 complexes between the amides and the cations studied, and DFT data show that all ligands form the most stable complexes with La³⁺.     

[3+2] Fragmentation of a Pentaphosphido Ligand by Cyanide

The activation of white phosphorus (P₄) by transition‐metal complexes has been studied for several decades, but the functionalization and release of the resulting (organo)phosphorus ligands has rarely been achieved. Herein we describe the formation of rare diphosphan‐1‐ide anions from a P₅ ligand by treatment with cyanide. Cobalt diorganopentaphosphido complexes have been synthesized by a stepwise reaction sequence involving a low‐valent diimine cobalt complex, white phosphorus, and diorganochlorophosphanes. The reactions of the complexes with tetraalkylammonium or potassium cyanide afford a cyclotriphosphido cobaltate anion 5 and 1‐cyanodiphosphan‐1‐ide anions [R₂PPCN]^? ( 6‐R ). The molecular structure of a related product 7 suggests a novel reaction mechanism, where coordination of the cyanide anion to the cobalt center induces a ligand rearrangement. This is followed by nucleophilic attack of a second cyanide anion at a phosphorus atom and release of the P₂ fragment.     

Die Chelate von Co(II), Ni(II), Cu(II), Zn(II) und Cd(II) mit Malonsäurehydrazid und dessen Arylidenderivaten

The metal chelates formed by the reaction of Co²⁺, Cu²⁺, Ni²⁺, Zn²⁺, and Cd²⁺ with malonic hydrazide and its arylidene derivatives are investigated. The i.r.-absorption spectra of the solid compounds supported the tetradentate character of these compounds; they also show that the ligand still attained the keto form. The shift of the C=O, C=N bands is utilized in determining the coordination bond length. The stoichiometry of the metal complexes, as studied by spectrophotometric and conductometric methods, is found to be metal ion: ligand =11. The apparent formation constants of the malonic hydrazide complexes are also determined.

---

---

Mit 4 Abbildungen     

过渡金属与新型硝基酚臂式氮杂18-冠-6配位性能的研究

合成并表征了1,10-二氧-4,7,13,16-四氮杂18-冠-6 (1)母体及其四取代硝基酚臂式衍生物 (2)。在H₂O-DMSO(V/V=1/4)混合溶剂中用UV-Vis光谱法对冠醚2与H⁺、Mn²⁺、Co²⁺、Ni²⁺、Cu²⁺、Zn²⁺、Cd²⁺和Hg^{2+相似文献}   

Chromenone-rhodamine conjugate for naked eye detection of Al3+ and Hg2+ ions in semi aqueous medium

Chromenone-rhodamine conjugate 1 has been synthesized and its metal ion binding properties have been studied in CH₃CN/water (3:1, v/v; 10 mM HEPES buffer; pH = 6.85). Compound 1 senses multiple metal ions such as Al³⁺ and Hg²⁺ by exhibiting turn on fluorescence and color change (colorless to pink). Al³⁺ and Hg²⁺ ions have been distinguished with the aid of tetrabutylammonium iodide (TBAI). While in the presence of I^? the pink color of the 1.Hg²⁺ complex was completely discharged; under identical conditions the pink color of 1.Al³⁺ complex was retained.     

Luminescence Method for Studying the Formation and Stability of Macromolecular Complexes of Transition Metals with Carboxyl-Containing Polymers in Organic Solvents

Quenching of the luminescence of carboxyl-containing polymer molecules containing a luminescent marker by transition metal ions (Cu²⁺, Ni²⁺) is observed not only in aqueous and aqueous-salt solutions, but also in polar organic solvents (methanol, ethanol, dimethylformamide). In dilute solutions, quenching refl ects binding of metal ions with the polymer and changes in the degree of filling of the polymer carboxyl groups with transition metal ions quenching the luminescence. The equilibrium stability constant of the formed macromolecular metal complex in organic media can be quantitatively estimated from the quenching effect using the relationships that follow from the law of mass action. The formation and stability of Cu²⁺ and Ni²⁺ complexes with polymethacrylic acid in protic (methanol, ethanol) and aprotic (dimethylformamide) solvents at low polymer concentrations (0.4–0.02 mg mL^–1) were studied using the quenching effect. In methanol, in contrast to ethanol and dimethylformamide, two mechanisms of binding of transition metal ions with different equilibrium stability constants of the complexes (\({K_{{1^{st}}}}\) > 3 × 10⁹ and \({K_{{2^{st}}}}\) ≈ 10⁶–10⁴) were revealed. The infl uence exerted on the stability of the complexes and on the complexation mechanism by the nature and acidity of the organic solvent, polymer concentration, kind of the transition metal ion quenching the luminescence, and NaOH and HCl additions was studied. The results obtained demonstrate the efficiency of the luminescence method used and prospects for its further use for studying polymer systems containing transition metal ions in organic solvents.     

Complexing Properties of Phenolic Diazacrown Ethers with Transition and Heavy Metal Ions

The complexation equilibria of the phenolic diazacrown ether derivatives L1–L11 with transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Pb²⁺) have been studied in methanol using UV absorption spectrophotometry. A majority of the systems studied formed only ML complexes. Using a ligand with a different position of the substituents on the phenolic side arms (denoted L7) leads to ML₂ formation with most of the metal ions. Every ligand forms very strong ML and ML₂ complexes with Pb²⁺, and, in nearly all cases, only a lower limit could be derived for the stability constant. The stability of the complexes generally increases as the length of the para-substituents on the phenol groups increases. Among the metal ions tested, Zn²⁺ and Hg²⁺ are the least preferred by alkyl and alkoxy derivatives, respectively.     

Synthesis,characterization, speciation and biological studies on metal chelates of 1-benzoyl(1,2,4-triazol-3-yl)thiourea

Proton-ligand association constants of 1-benzoyl(1,2,4-triazol-3-yl)thiourea (BTTU) and its complex formation constants with some bivalent metal ions Ni(II), Co(II), Mn(II), Zn(II), and Cu(II), have been determined potentiometrically in 50% EtOH–H₂O and 0.1 M NaNO₃. The complexes formed in solution have a stoichiometry of 1:1 and 1:2 [M:L], where M represents the metal ion and L the BTTU ligand. The corresponding thermodynamic parameters are derived and discussed. The complexes are stabilized by enthalpy changes and the results suggest that complexation is an enthalpy-driven process. The effects of metal ion, ionic radius, electronegativity, and nature of ligand on the formation constants are discussed. The formation constants of the complexes with 3d transition metals follow the order Mn²⁺ < Co²⁺ < Ni²⁺ < Cu²⁺ > Zn²⁺. The metal complexes were synthesized and characterized by elemental analyses, conductance, IR, ¹H NMR, and magnetic measurements. The low magnetic moment of 0.11 BM for the Cu(II) complex is suggestive of dimerization through Cu–Cu interaction. The concentration distribution diagrams of the complexes were evaluated. The ligands and their metal complexes have been screened in vitro against some bacteria and fungi.     

Synthesis, NMR characterization and ion binding properties of 1,3-bridged p-tert-butyldihomooxacalix[4]crown-6 bearing pyridyl pendant groups

1,3-Di(2-pyridylmethoxy)-p-tert-butyldihomooxacalix[4]arene-crown-6 (2) was synthesized for the first time. 2 was isolated in a cone conformation in solution at room temperature, as established by NMR spectroscopy (¹H, ¹³C and NOESY). Complete assignment of both proton and carbon NMR spectra was achieved by a combination of COSY, HSQC and HMBC experiments. The binding properties of ligand 2 towards alkali, alkaline earth, transition and heavy metal cations have been assessed by phase transfer and proton NMR titration experiments. The results are compared to those obtained with other dihomooxacalix[4]arene-crowns-6 and closely-related calix[4]arene-crown derivatives. 2 shows a preference for the soft heavy metal cations (except for Cd²⁺), with a very strong affinity for Ag⁺. Some transition metal cations are also well extracted. 2 forms 1:1 complexes with K⁺, Ca²⁺ and Ag⁺, and ¹H NMR titrations indicate that they should be encapsulated into the cavity defined by the crown ether unit and by the two pyridyl pendant arms. A 1:2 (ML₂) complex is formed with Zn²⁺ and two species, probably 1:1 and 1:2 complexes, are obtained with Pb²⁺.     

Some Arylidene-2-Pyridylhydrazone Derivatives as Reagents for Spectrophotometric Determination of Palladium (II)

Abstract

A method for spectrophotometric determination of palladium by complexation with Arylidene-2-pyridylhydrazone derivatives in 50% (V/V) ethanolic solution are described-Pd(II) forms a 1:1 complex with the reagents. Beer's law is obeyed over the range 0.2-6.5 μg ml^?1. The effect of pH, effect of excess reagent, stability of complexes as well as the tolerance amount of many metal ions have been reported. The method is applied, with fair accuracy, to the determination of pd(II) in synthetic solutions.     

Azocalixarenes. 6: Synthesis, complexation, extraction and thermal behaviour of four new azocalix[4]arenes

Four new azocalix[4]arenes {5,11,17,23-tetrakis[(2-hydroxy-5-tert-butylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (1), 5,11,17,23-tetrakis[(2-hydroxy-5-nitro phenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (2), 5,11,17,23-tetrakis[(2-amino-5-carboxylphenylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (3) and 5,11,17,23-tetrakis[(1-amino-2-hydroxy-4-sulfonicacidnapthylazo)]-25,26,27,28-tetrahydroxycalix[4]arene (4)} have been synthesized from p-tert-butylphenol, p-nitrophenol, p-aminobenzoic acid and 1-amino-2-hydroxy-4-sulphonic acid by diazo coupling reaction with p-aminocalix[4]arene. The resulting ligands (1–4) were treated with three transition metal salts (e.g., CuCl₂·2H₂O, NiCl₂·6H₂O or CoCl₂·6H₂O). Cu(II), Ni(II) and Co(II) complexes of the azocalix[4]arene derivatives were obtained and characterized by UV-vis, IR, ¹H-NMR spectroscopic techniques and elemental analysis. All the complexes have a metal:ligand ratio of 2:1. The Cu(II) and Ni(II) complexes of azocalix[4]arenes are square-planar, while the Co(II) complexes of azocalix[4]arenes are octahedral with water molecules as axial ligands. The solvent extraction of various transition metal cations from the aqueous phase to the organic phase was carried out by using azocalix[4]arenes (1–4). It was found that, azocalix[4]arenes 1, 2 and 3 examined selectivity for transition metal cations such as Ag⁺, Hg⁺ and Hg²⁺. In addition, the thermal stability of metal:azocalix[4]arene complexes were also reported. Dedicated to Prof. Dr. Mustafa Yılmaz on the occasion of his 50th birthday