Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

Vibrational spectra, conformations, ab initio calculations and vibrational assignments of 3-pentyn-2-ol

The infrared spectra of 3-pentyn-2-ol, CH₃CCCH(OH)CH₃, have been recorded as a vapour and liquid at ambient temperature, as a solid at 78 K in the 4000–50 cm⁻¹ range and isolated in an argon matrix at ca. 5 K. Infrared spectra of the solid phase at 78 K were obtained before and after annealing to temperatures of 120 and 130 K. The IR spectra of the solid were quite similar to that of the liquid.

Raman spectra of the liquid were recorded at room temperature and at various temperatures between 295 and 153 K. Spectra of an amorphous and annealed solid were recorded at 78 K. In the variable temperature Raman spectra, some bands changed in relative intensity and were interpreted in terms of conformational equilibria between the three possible conformers. Complete assignments were made for all the bands of the most stable conformer in which OH is oriented anti to C₁(a_Me). From various bands assigned to a second conformer in which OH is oriented anti to H_gem(a_H), the conformational enthalpy differences was found to be between 0.4 and 0.8 kJ mol⁻¹. The highest energy conformer with OH anti to C₃(a_C) was not detected.

Quantum-chemical calculations have been carried out at the MP2 and B3LYP levels with a variety of basis sets. Except for small basis set calculations for which the a_H conformer had slightly lower energy, all the calculations revealed that a_Me was the low energy conformer. The B3LYP/cc-pVTZ calculations suggested the a_Me conformer as more stable by 0.8 and 8.3 kJ mol⁻¹ relative to a_H an a_C, respectively. Vibrational wavenumbers and infrared and Raman band intensities for two of the three conformers are reported from B3LYP/cc-pVTZ calculations.     

Structure and conformational properties of carbonylbisimidosulfuryl fluoride, O=C(N=S(O)F2)2

The molecular structure and conformational properties of O=C(N=S(O)F₂)₂ (carbonylbisimidosulfuryl fluoride) were determined by gas electron diffraction (GED) and quantumchemical calculations (HF/3-21G* and B3LYP/6-31G*). The analysis of the GED intensities resulted in a mixture of 76(12)% syn–syn and 24(12)% syn–anti conformer (ΔH⁰=H⁰(syn–anti)−H⁰(syn–syn)=1.11(32) kcal mol⁻¹) which is in agreement with the interpretation of the IR spectra (68(5)% syn–syn and 32(5)% syn–anti, ΔH⁰=0.87(11) kcal mol⁻¹). syn and anti describe the orientation of the S=N bonds relative to the C=O bond. In both conformers the S=O bonds of the two N=S(O)F₂ groups are trans to the C–N bonds. According to the theoretical calculations, structures with cis orientation of an S=O bond with respect to a C–N bond do not correspond to minima on the energy hyperface. The HF/3-21G* approximation predicts preference of the syn–anti structure (ΔE=−0.11 kcal mol⁻¹) and the B3LYP/6-31G* method results in an energy difference (ΔE=1.85 kcal mol⁻¹) which is slightly larger than the experimental values. The following geometric parameters for the O=C(N=S)₂ skeleton were derived (r_a values with 3σ uncertainties): C=O 1.193 (9) Å, C–N 1.365 (9) Å, S=N 1.466 (5) Å, O=C–N 125.1 (6)° and C–N=S 125.3 (10)°. The geometric parameters are reproduced satisfactorily by the HF/3-21G* approximation, except for the C–N=S angle which is too large by ca. 6°. The B3LYP method predicts all bonds to be too long by 0.02–0.05 Å and the C–N=S angle to be too small by ca. 4°.     

Infrared and Raman spectra, conformational stability, ab initio calculations, and vibrational assignments for methylaminothiophosphoryl difluoride

Infrared spectra (4000–50 cm⁻¹) of the vapor, amorphous and crystalline solids and Raman spectra (3600–10 cm⁻¹) of the liquid with qualitative depolarization data as well as the amorphous and crystalline solids of methylaminothiophosphoryl difluoride, CH₃N(H)P(=S)F₂, and three deuterated species, CD₃N(H)P(=S)F₂, CH₃N(D)P(=S)F₂, and CD₃N(D)P(=S)F₂, have been recorded. The spectra indicate that in the vapor, liquid and amorphous solid a small amount of a second conformer is present, whereas only one conformer remains in the low temperature crystalline phase. The near-infrared spectra of the vapor confirms the existence of two conformers in the gas phase. Asymmetric top contour simulation of the vapor shows that the trans conformer is the predominant vapor phase conformer. From a temperature study of the Raman spectrum of the liquid the enthalpy difference between the trans and near-cis conformers was determined to be 368±15 cm⁻¹ (4.41±0.2 kJ/mol), with the trans conformer being thermodynamically preferred. Ab Initio calculations with structure optimization using the 6-31G(d) and 6-311+G(d,p) basis sets at the restricted Hartree–Fock (RHF) and/or with full electron correlation by the perturbation method to second order (MP2) support the occurrence of near-trans (5° from trans) and near-cis (20° from cis) conformers. From the RHF/6-31G(d) calculation the near-trans conformer is predicted to be the more stable form by 451 cm⁻¹ (5.35 kJ/mol) and from the MP2/6-311+G(d,p) calculation by 387 cm⁻¹ (4.63 kJ/mol). All of the normal modes of the near-trans rotamer have been assigned based on infrared band contours, depolarization values and group frequencies and the assignment is supported by the normal coordinate calculation utilizing harmonic force constants from the MP2/6-31G(d) ab initio calculations.     

Molecular and electronic structures, infrared spectra, and vibrational assignment for ap and sc conformers of hexafluoro-iso-propanol

Comprehensive studies of the molecular structures, vibrational frequencies and infrared intensities of the antiperiplanar (ap) and synclinal (sc) conformers of 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) have been performed by the density functional (B3LYP) method using the extended 6-311++G(df,pd) basis set. The detailed natural bond orbital (NBO) analysis has revealed the nature of the hyperconjugative interactions, which stabilize each conformer, in the gas phase. The mid-infrared spectra of HFIP in carbon tetrachloride solution were measured, and the experimental intensities of each conformer were obtained by the curve–resolution procedure. The relative abundance of the two conformers, calculated from the relative intensities, shows nearly equimolar ratio (N_sc/N_ap ≈ 1), in this solution. The DFT-predicted frequencies show very good agreement with the experimental data. The clear-cut vibrational assignment for each conformer is reported on the basis of the calculated potential energy distributions. Several controversies in an earlier assignment of HFIP have been elucidated.     

Ab initio structures and vibrational analysis of the isoprene conformers

Complete gradient optimizations of the structures and the calculation of the harmonic force fields of the s-trans(anti) and gauche conformers of isoprene (2-methylbuta-1,3-diene) are reported at the RHF/6-31G level. The dihedral angle of the gauche conformer is found to be 41.0° from the planar s-cis(syn) form. The force fields obtained are refined using scale factors transferred from analogous calculations for trans-butadiene-1,3 and ethane. The direct vibrational problems are solved for both conformers of isoprene. A complete assignment of the experimental vibrational frequencies is given.     

Conformational stability of 1-pentyne from temperature dependent FT-IR spectra of liquid rare gas solutions and ab initio calculations

Variable temperature studies of the infrared spectra (3500–400 cm⁻¹) of 1-pentyne, CH₃CH₂CH₂CCH, dissolved in liquid xenon (−55 to −100°C) and liquid krypton (−105 to −150°C) have been recorded. These data indicate that the anti (methyl group trans to the acetylenic group) and gauche conformers have relative concentrations that vary with the temperature, i.e. enthalpy nonzero. Utilizing seven sets of conformer pairs for the xenon solution and ten sets of conformer pairs for the krypton solution, the enthalpy difference has been determined to be 50±6 cm⁻¹ (0.60±0.07 kJ/mol) and 45±4 cm⁻¹ (0.54±0.05 kJ/mol), respectively, with the anti conformer the more stable form. Because of two equivalent gauche forms, this conformer is estimated to be in higher abundance at 61±1% in the xenon solution and 62±1% in the krypton solution. Optimized geometries and conformational stabilities have been obtained from ab initio calculations with basis sets 6-31G(d), 6-311+G(d,p), 6-311+G(2d,2p) and 6-311+G(2df,2pd) with full electron correlation by the perturbation method to second order (MP2). All of the calculations predict the gauche rotamer to be the more stable form with a high value of 181 cm⁻¹ from the MP2/6-311+G(d,p) calculations and a low value of 107 cm⁻¹ from the MP2/6-311+G(2d,2p) calculation. The r_o adjusted structural parameters have been obtained from a combination of the microwave rotational constants and ab initio predicted parameters. The values are compared to the recently reported values from an electron diffraction study where the value for the CC bond distance appears to be too long. The results are discussed and the conformational stability is compared to those obtained for some similar molecules.     

Raman and infrared spectra, conformational stability, ab initio calculations and vibrational assignments for 2-chloroethyl silane

The infrared (3500–30 cm⁻¹) spectra of gaseous and solid and the Raman (3500–10 cm⁻¹) spectra of liquid with quantitative depolarization ratios and solid 2-chloroethyl silane, ClCH₂CH₂SiH₃, have been recorded. Similar data have been recorded for the Si–d₃ isotopomer. These data indicate that two conformers, trans and gauche, are present in the fluid states but only one conformer, trans, is present in the solid. The mid-infrared spectra of the sample dissolved in liquified xenon as a function of temperature (−55 to −100°C) has been recorded. The enthalpy difference between the conformers has been determined to be 181±12 cm⁻¹ (2.17±0.14 kJ/mol) with the trans rotamer the more stable form. From the isolated Si–H frequencies from the Si–d₂ isotopomer the r_o Si–H distances of 1.484 and 1.483 Å for the trans and 1.481 for the gauche conformers have been obtained. Ab initio calculations have been carried out with several different basis sets up to MP2/6-311+G** from which structural parameters and conformational stabilities have been determined. With all the basis sets the trans form is predicted to be the more stable conformer which is consistent with the experimental results. These results are compared to the corresponding quantities for the carbon analogue.     

Ab initio study of anomeric effect in 2,2-difluoroglycine

The optimized molecular structures of seven conformations of 2,2-difluoroglycine have been obtained from ab initio calculations. For conformers in which the lone pair of electrons on the nitrogen are antiperiplanar to one of the C–F bonds, that C–F bond is longer than the other C–F bond, which is synperiplanar to the lone pair of electrons. Conformers which have these features are the most stable conformers of those examined. This observation is explained in terms of an anomeric effect of the 1p(N)→σ^*(C–F). At the MP2/6-31G^* level of calculation, conformers IV and V are 21.5 and 18.7 kJ/mol, respectively, more stable than the least stable conformer, VI, which does not exhibit an anomeric effect. Conformer VII was found to be exceptionally stable, in addition to an anomeric effect, this conformer also exhibits features of a FH–O hydrogen bond.     

Density functional theory investigations on the conformational stability and vibrational spectra of the model compound of vitamin K

Becke 3-Lee–Yang–Parr density functional theory (DFT/B3LYP) using 6-31G(d) and 6-311G(d) basis sets and the scaled quantum mechanics (SQM) force field method are used to study molecular conformations and vibrational spectra of a model compound of vitamin K (VK). In this molecule, there are six conformers on the torsional potential energy map of the dihedral angles C₈C₁₄C₁₅C₁₆ () and C₇C₈C₁₄C₁₅ (β). It is shown that the VK_1 conformer ( = 237.7° and β = 274.2°) is the most stable form. For this lowest energy conformer, the harmonic force fields calculated by B3LYP/6-311G(d) and B3LYP/6-31G(d) methods are scaled with one scale factor of 0.9623 and a set of different scale factors transferred from the previous studies for the other similar molecules, respectively. The vibrational frequencies, IR intensities, and Raman activities are obtained for the lowest energy conformer. On the basis of B3LYP calculations, the normal mode analysis is performed to assign the vibrational fundamental frequencies according to the potential energy distributions. The computational frequencies are in good agreement with the observed results.     

Far infrared spectra, conformational equilibria, vibrational assignments, ab initio calculations and structural parameters for 2-bromoethanol

The far infrared spectrum from 370 to 50 cm⁻¹ of gaseous 2-bromoethanol, BrCH₂CH₂OH, was recorded at a resolution of 0.10 cm⁻¹. The fundamental O–H torsion of the more stable gauche (Gg′) conformer, where the capital G refers to internal rotation around the C–C bond and the lower case g to the internal rotation around the C–O bond, was observed as a series of Q-branch transitions beginning at 340 cm⁻¹. The corresponding O–H torsional modes were observed for two of the other high energy conformers, Tg (285 cm⁻¹) and Tt (234 cm⁻¹). The heavy atom asymmetric torsion (rotation around C–C bond) for the Gg′ conformer has been observed at 140 cm⁻¹. Variable temperature (−63 to −100°C) studies of the infrared spectra (4000–400 cm⁻¹) of the sample dissolved in liquid xenon have been recorded. From these data the enthalpy differences have been determined to be 411±40 cm⁻¹ (4.92±0.48 kJ/mol) for the Gg′/Tt and 315±40 cm⁻¹ (3.76±0.48 kJ/mol) for the Gg′/Tg, with the Gg′ conformer the most stable form. Additionally, the infrared spectrum of the gas, and Raman spectrum of the liquid phase are reported. The structural parameters, conformational stabilities, barriers to internal rotation and fundamental frequencies have been obtained from ab initio calculations utilizing different basis sets at the restricted Hartree–Fock or with full electron correlation by the perturbation method to second order. The theoretical results are compared to the experimental results when appropriate. Combining the ab initio calculations with the microwave rotational constants, r₀ adjusted parameters have been obtained for the three 2-haloethanols (F, Cl and Br) for the Gg′ conformers.     

Selective IR-induced isomerization of 1,2-dichloropropane isolated in xenon matrix

The conformations of monomeric 1,2-dichloropropane isolated in low temperature xenon matrix were characterized experimentally using FTIR spectroscopy. The interpretation of the experimental spectra was aided by ab initio MP2/6-311++G(3df,3pd) calculations. Relative energies of three structures, differing by the orientation of the Cl−C−C−Cl dihedral angle, fall within 0–6 kJ mol⁻¹ range. The spectral signatures of all three conformers were identified experimentally. Infrared irradiation of the matrix isolated compound resulted in selective conversion of the most stable Trans conformer into the higher energy Gauche+ rotamer, while the Gauche− conformer remained unaffected. This result was interpreted in terms of calculated energy barriers and dipole moments.     

Conformational and structural studies of ethyl fluorosilane from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

The infrared spectra (3200–30 cm⁻¹) of gaseous and solid ethyl fluorosilane, CH₃CH₂SiH₂F, have been recorded. Additionally, the Raman spectra (3200–30 cm⁻¹) of the liquid and solid have been recorded and quantitative depolarization values obtained. Both the gauche and trans conformers have been identified in the fluid phases but only the gauche conformer remains in the solid. Variable temperature (−105 to −150°C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 54±16 cm⁻¹ (646±191 J/mol) with the gauche conformer the more stable form. This is consistent with the predictions from ab initio, MP2/6-311+G(2d,2p), calculation as well as those with smaller basis sets with full electron correlations. A complete vibrational assignment is proposed for both the trans and gauche conformers based on infrared band contours, relative intensities, depolarization values, and group frequencies, which are supported by normal-coordinate calculations utilizing the force constants from MP2/6-31G(d) ab initio calculations. Complete equilibrium geometries have been determined for both rotamers by ab initio calculations employing a variety of basis sets up to 6-311+G(2d,2p) at levels of restricted Hartree–Fock (RHF) and/or Moller Plesset to the second order (MP2) with full electron correlation. The adjusted r₀ parameters have been obtained for both conformers from a combination of the previously reported rotational constants with ab initio predicted values. All results are compared to similar quantities of some corresponding molecules.     

Molecular structure and conformational stability of allylisocyanate—post-Hartree–Fock and density functional theory studies

The molecular structure and conformational stability of allylisocyanate (CH₂CHCH₂NCO) molecule was studied using the ab initio and DFT methods. The geometries of possible conformers, C-gauche (δ=120°, θ=0°) (δ=C=C–C–N and θ=C–C–N=C) and C-cis N-trans (δ=0° and θ=180°) were optimized employing HF/6-31G^*, MP2/6-31G^* levels of theory of ab initio and BLYP, B3LYP, BPW91 and B3PW91 methods of DFT implementing the atomic basis set 6-311+G(d,p). The structural and physical parameters of the above conformers were discussed with the experimental and theoretical values of the related molecules, methylisocyanate and 3-fluoropropene. It has been found that the N=C=O bond angle is not linear as the experimental result for both the conformers and the theoretical bond angle is 173°. The rotational potential energy surfaces have been performed at the HF/6-31G^*, and MP2/6-31G^* levels of theory. The Fourier decomposition potentials were analysed at the HF/6-31G^*, and MP2/6-31G^* levels of theory. The HF/6-31G^* level of theory predicted that the C-gauche conformer is more stable than the C-cis N-trans conformer by 0.41 kJ/mol, but the MP2 and DFT methods predicted the C-cis N-trans conformer is found to be more stable than the C-gauche conformer. The calculated chemical hardness value at the HF/6-31G^* level of theory predicted the C-cis N-trans form is more stable than C-gauche form, whereas the chemical hardness value at the MP2/6-31G^* level of theory favours the slight preference towards the C-gauge conformer.     

Molecular simulations for the conformational assessment of a porphyrin-fullerene dyad in different environments

Conformational space of a porphyrin-fullerene dyad with the donor and acceptor connected by a relatively flexible linker is studied by molecular dynamics simulations in both non-polar and polar solvents, as well as in vacuum. The most probable conformations obtained from the vacuum MD simulations were optimized with semi-empirical (SE) and density functional theory (DFT) methods and the extent of the structural changes is assessed. The computational results indicate the co-existence of different conformers in both polar and nonpolar solvents showing agreement with experimental results. The most probable vacuum conformations at 300 K are similar to the ones at 0 K, while the structures most often observed in the solvents show less compact conformations. Optimization with SE and DFT calculations leads to structures, which represent relatively well the folded conformations in solvent, which validates the electronic structure calculations relevant to describing photoinduced electron-transfer in H2P-O34-C60.     

Quantum chemical modeling of chiral catalysis. Part 14. On the coordination of carbonyl compounds to diaza-, oxaza- and dioxaluminolidines of potential use as chiral controllers in organic synthetic chemistry

Conformers of 4-coordinate adducts of carbonyl compounds and diaza-, oxaza- and dioxaluminolidines were investigated by means of ab initio MO methods (RHF). Formaldehyde was used as a model of carbonyl compounds. Relative stabilities of the conformers indicate formation of syn adducts of carbonyl compounds and aluminolidines (C_C=O and aluminolidine ring syn about the Al---O_C=O bond) to be favoured over that of the corresponding anti ones (all syn/anti ratios higher than 99:1, 6–31G//6–31G). The energetic preference for the formation of syn adducts of oxazaaluminolidines was about twice as high as that of diaza- or dioxaluminolidines of which the syn/anti selectivities were found to be practically equal.     

Spatial structure of β-substituted alkoxyvinyl trifluoromethyl ketones

Spatial structure of six β-substituted enones, with common structure R₁O–CR₂CH–COCF₃, were R₁ = C₂H₅, R₂ = H (ETBO); R₁ = R₂ = CH₃ (TMPO); R₁ = C₂H₅, R₂ = C₆H₅ (ETPO); R₁ = C₂H₅, R₂ = 4- O₂NC₆H₄ (ETNO); R₁ = C₂H₅, R₂ = C(CH₃)₃ (ETDO) were investigated by ¹H and ¹⁹F NMR, infrared spectroscopy and AM1 calculations. NMR spectra revealed that enones (MBO), (ETBO) and (TMPO) are exclusively (3E) isomers, whereas in (ETPO), (ETNO) and especially in (ETDO) the percentage of (3Z) isomers is significant and depends on the nature of solvents. Conformational behaviour of studied enones are determined by the rotation around of CC double bond, C–C and C–O single bonds (correspondingly trifluoroacetyl and alkoxy groups), and (EZZ) conformer being the most stable in all cases. IR spectra revealed that with the exception of (ETDO) (EZZ) conformer is most populated in all cases. Bulky substituents like phenyl or tert-butyl group at β-position of enone result in the equilibrium mainly between (EZZ) and (ZZZ) forms, whereas β-hydrogen and β-methyl substituents determine the equilibrium between (EZZ) and (EEZ) or (EZE) conformers.     

Direct asymmetric aldol reaction catalyzed by simple prolinamide phenols

Simple prolinamides 1a–f were synthesized, and their catalytic effects on the direct asymmetric aldol reactions in organic solvents and in water were evaluated. Prolinamide phenols 1a–d were found to be effective catalysts for the reaction of aromatic aldehydes with cyclohexanone in neat ketone and in water. The anti-aldol products were obtained with up to 98/2 anti/syn ratio and 96% ee in neat ketone, 98/2 anti/syn ratio and 99% ee in water, respectively.     

Conformational and structural studies of 1-fluorosilacyclobutane from temperature dependent FT-IR spectra of krypton solutions and ab initio calculations

The infrared spectra (3500 to 40 cm⁻¹) of gaseous and solid and the Raman spectra (3500 to 30 cm⁻¹) of liquid and solid 1-fluorosilacyclobutane, c-C₃H₆SiFH, have been obtained. Both the axial and equatorial conformers with respect to the fluorine atom have been identified in the fluid phases. Variable temperature (−105 to −150 °C) studies of the infrared spectra of the sample dissolved in liquid krypton have been carried out. From these data, the enthalpy difference has been determined to be 282 ± 27 cm⁻¹ (3.37 ± 0.32 kJ/mol), with the equatorial conformer the more stable form and the only conformer remaining in the annealed solid. At ambient temperature there is approximately 21 ± 2% of the axial conformer present in the vapor phase. From isolated Si–H stretching frequencies the Si–H (r₀) distances are calculated to be 1.484 and 1.485 Å for the equatorial and axial conformers, respectively. Structural parameters have been predicted from MP2/6-311 + G(d,p) ab initio calculations and the adjusted r₀ parameters for both conformers were obtained from a combination of the ab initio predicted values and the six previously reported microwave rotational constants. Along with the Si–H bond distance, the Si–C, and C–C distances of 1.865(5), and 1.571(5) Å, respectively, for the equatorial conformer are significantly different from the values for these parameters previously reported from an election diffraction study. Both the SiC and CC distances and the SiF distance are longer by 0.002 and 0.004 Å, respectively, for the axial conformer. Structural parameters have also been obtained for silacyclobutane, c-C₃H₆SiH₂ and ethylsilylfluoride, CH₃CH₂SiH₂F, from combined ab initio predicted values and previously reported rotational constants. Several of these newly determined parameters are significantly different from those previously reported for both molecules. Complete equilibrium geometries, conformational stabilities, harmonic force fields, infrared intensities, Raman activities, and depolarization ratios have been determined for both rotamers by ab initio calculations employing the 6-31G(d) basis set at the level of Moller–Plesset (MP) to second order. A complete vibrational assignment supported by normal coordinate calculations is proposed for the equatorial conformer, and several of the fundamentals of the axial conformer have also been identified. The results are discussed and compared to corresponding quantities for some similar molecules.     

1,1,2,2-tetrabromodisilane: gas-phase molecular structure and conformational composition as determined by electron diffraction

The molecular structure of 1,1,2,2-tetrabromodisilane has been investigated using gas-phase electron diffraction data obtained at 110°C. At this temperature the molecules exist as a mixture of about equal parts (X = 0.5 ±0.2) of the two conformers with the H---Si---Si---H torsion angle equal to 180° (anti) or 60° (gauche). Assuming that the two conformers differ in their geometries only in the torsion angle φ, some of the important distance (r_a) and angle () parameters are: r(Si---Si) = 2.349(19) Å, r(Si---Br) = 2.205(5) Å, r(Si---H) = 1.485 Å (assumed), Br---Si---Br = 110.1(1.6)°, Si---Si---Br = 107.1(1.2)° Si---Si---H = 108.6° (assumed). The error limits are 2σ. The observed conformational composition (X_anti = 0.5(0.2)) corresponds to an energy difference between the conformers of ΔE = E(gauche) — E(anti) = 0.5 ± 0.6 kcal mol⁻¹, assuming ΔS = Rln2.