Kinetic analysis of the crystallization processes in the glasses of the Bi–As–S system

Kinetic analysis of the crystallization process in Bi₄(As₂S₃)₉₆ and Bi₆(As₂S₃)₉₄ glasses was performed based on DSC curves recorded under non-isothermal measurement conditions. Samples were thermally treated at different heating rates in the temperature range 300?C770?K. The activation energy of crystallization E and the pre-exponential factor K ₀ are determined by the Kissinger method and the characteristic crystallization parameters m and n of investigated glasses by the Matusita method. For both crystallization processes the glass with 4 at.% of Bi is characterized by the mechanism of volume nucleation, which is manifested in the form of two-dimensional growth at the first crystallization process, and as three-dimensional at the second one. On the other hand, in the sample with 6 at.% Bi, the average value of the parameter m is close to one, which indicates one-dimensional crystal growth. Compatibility of the values of the parameters m and n suggests that this sample has a large number of crystallization centers, which do not increase significantly during the thermal treatment.     

Thermal Studies of the Hardening of the Systems Calcium Silicates–Electrolyte–Water

Thermal studies, sometimes together with X-ray analysis, were applied to investigate the process of hydration in the systems calcium silicates (tricalcium silicate or dicalcium silicate) - water - electrolyte. Alkali metal or alkaline-earth metal salts were used as electrolytes. Results and conclusions are presented concerning the action of electrolytes upon the kinetics of hardening of the calcium silicates and the composition and phase transformation of calcium hydrosilicate in the presence of low proportions of electrolytes (0.5, 2 and 5 mass%), these effects being due to ionic substitution. A higher proportion of electrolyte (above 2%) in the systems calcium silicate-water can determine the formation of a complex salt, e.g. calcium hydroxysalts or double hydrosilicates. This revised version was published online in August 2006 with corrections to the Cover Date.     

The influence of the temperature on the liquid–liquid equilibrium of the ternary system 1-pentanol–ethanol–water

Liquid–liquid equilibrium data for the ternary system 1-pentanol–ethanol–water have been determined experimentally at 25, 50, 85 and 95°C. These results have been correlated simultaneously by the uniquac method obtaining two sets of interaction parameters: one of them independent of the temperature and the other with a linear dependence. Both sets of parameters fit the experimental results well.     

LC–DAD–ESI-MS–MS Separation and Chemical Characterization of the Inflammatory Fraction of the Roots of Euphorbia kansui

In China the roots of Euphorbia kansui T.N. Liou ex T.P. Wang, known as ‘kansui’, have been used for centuries as a herbal remedy for edema, ascites, and asthma. Kansui, has inflammatory and tumor-promoting toxicity, and other side-effects, however, which have seriously restricted its clinical application. In the work discussed in this paper a simple and rapid LC–DAD–ESI-MS–MS method has been established for separation and characterization of the main compounds in the toxic fraction of E. kansui roots. Twelve diterpene derivatives were identified in the inflammatory fraction of kansui: kansuinine C, kansuinine B, kansuinine A, kansuinine D, 5-O-benzoyl-20-deoxyingenol, kansuinine E, kansuiphorin C, 3-O-benzoyl-20-deoxyingenol, 3-O-(2′E,4′Z-decadienoyl)-5-O-acetylingenol, 3-O-(2′E,4′Z-decadienoyl)-20-deoxyingenol, 20-O-(2′E, 4′E-decadienoyl)ingenol, and 3-O-(2′E,4′Z-decadienoyl)-20-O-acetylingenol. The inflammatory fraction was separated on a C₁₈ reversed-phase column with a mobile phase gradient. The proposed method is a scientific and technical platform enabling the herbal medicine industry to perform quality control and ensure the safety of preparations that contain this class of poisonous diterpenoids.     

Effect of the Acid–Base Properties of the Support on the Activity of Pd–Zeolite Catalysts for CO Oxidation

The effect of the acid–base properties of zeolite Y on the activity of palladium–zeolite catalysts for CO oxidation was studied. The modification of the support with basic additives was found to improve the catalyst activity. A linear correlation between the ratio between the amounts of O₂and CO adsorbed on the surface of palladium and the catalyst activity was established.     

On the Nature of the Cherdyntsev–Chalov Effect

It is shown that the Cherdyntsev–Chalov effect, usually presented as the separation of even isotopes of uranium upon their transition from the solid to the liquid phase, can include initiated acceleration of the radioactive decay of uranium-238 nuclei during the formation of cracks in geologically (seismic and volcanically) active zones of the Earth’s crust. The fissuring of the solid-phase medium leads to an increase in mechanical tensile stress and the emergence of strong local electric fields, resulting in the injection of chemical-scale high-energy electrons into the aqueous phase of the cracks. Under these conditions, the e^? catalytic decay of uranium-238 nucleus studied earlier can occur during the formation of metastable protactinium-238 nuclei with locally distorted nucleon structure, which subequently undergo β^–decay with the formation of thorium-234 and helium-4 nuclei as products of the fission of the initial uranium-238 nucleus with a characteristic period of several years. The observed increased activity of uranium-234 nuclei that form during the subsequent β-decay of thorium and then protactinium is associated with the initiated fission of uranium-238. The possibility is discussed of developing thermal power by using existing wastes from uranium production that contain uranium-238 to activate this isotope through the mechanochemical processing of these wastes in aqueous media with the formation of ₉₁ ²³⁸ Pa _isu , the half-life of which is several years.     

Formation of the layering boundary in the water–benzene–perfluorobenzene system

The dynamics of the interface between liquid phases in the water–benzene–perfluorobenzene system was studied in a natural experiment. The interfacial tension was found to depend on the density of the organic layer. The range of interfacial tensions in which inversion of the organic and aqueous phases takes place was determined, and the working range of a separating flask as an element of the separation scheme for the mixture was revealed.     

Experimental investigation of the Nd–Al–Si system

The isothermal section of the Nd–Al–Si ternary system at 500 °C has been investigated using differential thermal analysis, X-ray diffraction analysis, scanning electron microscopy and electron micro-probe analysis. Four ternary intermetallic compounds were confirmed: NdAl₂Si₂ (τ₁), hP5-CaLa₂O₂ structure type, Nd₂Al₃Si (τ₂), hP3-AlB₂ structure type, NdAl_1−x Si_1+x , 0.25 ≤ x ≤ 0.3 (τ₃), tI12-αThSi₂ structure type and Nd₂Al_1−x Si_1+x , 0 ≤ x ≤ 0.2, (τ₅), oS8-CrB structure type. A new ternary intermetallic phase (τ₄) was found: Nd₄Al₃Si₃, orthorhombic oS20, isotypic with Pr₄Al₃Ge₃.     

Study and 3D modeling of the phase diagram of the Ag–Ge–Se system

In view of the contradictoriness of the literature data, phase equilibria in the Ag–Ge–Se system were restudied by differential thermal analysis and X-ray powder diffraction analysis. A number of polythermal sections and an isothermal section at room temperature of the phase diagram were constructed, and so was the projection of the liquidus surface. The primary crystallization fields of phases and the types and coordinates of in- and monovariant equilibria were determined. It was shown that, in the system, a single ternary compound, Ag₈GeSe₆, forms, which undergoes congruent melting at 1175 K and a polymorphic transformation at 321 K. The formation of the compounds Ag₂GeSe₃ and Ag₈GeSe₅, which was previously reported in the literature, was not confirmed. Based on the phase diagrams of boundary binary systems and the results of the differential thermal analysis of a number of samples of the ternary system, equations were obtained for calculation and 3D modeling of the liquidus and phase-separation surfaces.     

An effective modification of the Benedict–Webb–Rubin equation of state

A modification of the BWR equation of state is proposed, which is a simplified form of a previously proposed one. It applies to systems formed by hydrocarbons and related compounds, with particular attention to the critical conditions. The range of treatable compounds was extended to a value 0.9 of the acentric factor, corresponding to C₂₀ hydrocarbons. The critical compressibility factor Z_c was made independent of the acentric factor, for a more accurate prediction of pure-component properties (the previous equation did not give the same improvement). Mixing rules require one binary interaction constant for each component pair. Zero binary constants can be used for methane–alkane and alkane–alkane pairs. Examples of applications to pure hydrocarbons and their mixtures are given.     

Influence of the nickel content on the electrocatalytic activity of thin nanostructured Co–Te–Ni–O films

The influence of nickel addition in Co–Te–O catalytic films, obtained by vacuum co-evaporation of Co, Ni, and TeO₂ on electrocatalytic activity toward oxygen reactions in alkaline media has been investigated. Bifunctional gas-diffusion oxygen electrodes were prepared by direct deposition of catalyst films on gas-diffusion membranes consisting of hydrophobized carbon blacks. The method used allows the deposition of nanostructured films consisting of intertwined nanowires with high surface area. Thus, obtained electrodes with different atomic ratio R _(Co+Ni)/Te of the catalyst, fresh and thermally treated at 100 °C temperatures were electrochemically tested by means of cyclic voltammetry and steady-state voltammetry. It has been shown that the partial replacement of Co with about 30 at.% Ni leads to the increase in the film catalytic activity toward oxygen evolution reaction.     

Simple modification of the temperature dependence of the Sanchez–Lacombe equation of state

In this work, the interaction energy term of the Sanchez–Lacombe equation of state (SL EOS) was modified to take into account the temperature dependence of hydrogen bonding and ionic interactions. A simple function was used in the form of the Langmuir equation that reduces to the original SL EOS at high temperature. Comparisons are shown between the ?*-modified SL EOS and the original SL EOS. The ?*-modified SL EOS could represent volumetric data for the group of non-polar fluids, polar fluids and ionic liquids to within an absolute average deviation (AAD) of 0.85%, 0.51%, and 0.054%, respectively whereas, the original Sanchez–Lacombe EOS gave AAD values of 0.99%, 1.2%, and 0.21%, respectively. The ?*-modified SL EOS provides remarkably better PVT representation and can be readily applied to mixtures.     

HPIC–UV–ICP–SFMS study of the interaction of cisplatin with guanosine monophosphate

Interaction of cis-[Pt(NH₃)₂Cl₂] (cisplatin) with 5′-guanosine monophosphate (5′-GMP) has been investigated for the first time by on-line coupling of high performance ion chromatography (HPIC) to inductively coupled plasma sector field mass spectrometry (ICP–SFMS). The time-dependent reaction course of the cisplatin-5′-GMP system was followed after incubation under simulated physiological conditions by monitoring the decrease in the concentration of 5′-GMP and the increase in the concentration of formed adducts, on the basis of speciation analysis. Because of the two-step mechanism an intermediate mono adduct was observed together with the major product, the bis adduct cis-[Pt(NH₃)₂(GMP)₂]^2–. The data obtained correlated well with those from earlier studies employing orthogonal techniques such as capillary electrophoresis (CE). Furthermore, HPIC–ICP–SFMS provided unambiguous stoichiometric information about the major GMP-adduct. For this purpose the platinum-to-phosphorus ratio was determined by simultaneously measuring ³¹P and ¹⁹⁵Pt. To separate significant interferences from ¹⁵N¹⁶O⁺, ¹⁴N¹⁶O¹H⁺, ¹²C¹⁸O¹H⁺, and ¹³C¹⁷O¹H⁺ on ³¹P, high-mass resolution (m/Δm = 4500) proved to be mandatory. The P/Pt signal ratio of 2/1 obtained corresponds to the molar ratio in the bis adduct cis-[Pt(NH₃)₂(GMP)₂]^2–.     

Texture–Strength Properties of the Alumina–Montmorillonite Composite

The texture characteristics and strength properties of the molded alumina–montmorillonite composite are studied. The mixture is obtained by mixing suspensions of activated clay and pseudoboehmite followed by drying (at 293 and 393 K) and calcination (at 873 K). It is a promising support for cracking and hydrotreating catalysts. The changes in the specific surface area; the volumes of micro-, meso-, macropore, and medium-size pores; and the strength of samples are studied by varying the montmorillonite concentration in the composite. The addition of 20–35 wt % clay largely results in a sharp in reduction of the macropore region and, correspondingly, provides the alumina oxide average strength of the extrudates of 10–12 MN/m², which is sufficient for industrial supports. This excludes the stage of standard acidic peptization from the technological scheme of alumina production. The complex study of the porous structure of the composite by adsorption and mercury porosimetry combined with elements of percolation theory makes it possible to predict the texture–strength properties of derivative materials.     

The construction of the Gilmore–Perelomov coherent states for the Kratzer–Fues anharmonic oscillator with the use of the algebraic approach

By applying the algebraic approach and the displacement operator to the ground state, the unknown Gilmore–Perelomov coherent states for the rotating anharmonic Kratzer–Fues oscillator are constructed. In order to obtain the displacement operator the ladder operators have been applied. The deduced SU(1, 1) dynamical symmetry group associated with these operators enables us to construct this important class of the coherent states. Several important properties of these states are discussed. It is shown that the coherent states introduced are not orthogonal and form complete basis set in the Hilbert space. We have found that any vector of Hilbert space of the oscillator studied can be expressed in the coherent states basis set. It has been established that the coherent states satisfy the completeness relation. Also, we have proved that these coherent states do not possess temporal stability. The approach presented can be used to construct the coherent states for other anharmonic oscillators. The coherent states proposed can find applications in laser-matter interactions, in particular with regards to laser chemical processing, laser techniques, in micro-machinning and the patterning, coating and modification of chemical material surfaces.     

On the thermodynamics of the McMillan–Mayer state function

The osmotic second virial coefficient is a key parameter in light scattering, protein crystallisation, self-interaction chromatography, and osmometry. The interpretation of the osmotic second virial coefficient depends on the solution theory. On the macroscopic level an expansion of the osmotic pressure is employed. A common statistical interpretation of the osmotic second virial coefficient of the expansion employs the McMillan–Mayer framework and the potential of mean force to characterise the solute–solute interaction. Supplementary to the statistical interpretation, it may be advantageous to develop the McMillan–Mayer framework in a classical thermodynamic context for which we develop the relationship between the state function of the McMillan–Mayer framework and the Helmholtz state function.     

On the kinetics of pozzolanic reaction in the system kaolin–lime–water

The kinetics of the pozzolanic reaction of enriched kaolin from the “Senovo” deposit (Bulgaria) with lime is the object of this article. The kaolin contains kaolinite as a major clay mineral as well as admixtures of quartz and illite. The experimental data of pozzolanic activity at temperatures of 100 and 23 °C are obtained for different reaction times. The reaction degrees of kaolinite and lime at 100 °C are determined from the pozzolanic activity data using a powder X-ray diffraction analysis. The kinetic analysis is performed by joint presentation of theoretical and experimental data in dimensionless coordinates having in mind the influence of particle size distribution on the reaction rate. It is found by the kinetic analysis that the rate of entire reaction is limited by the rate of chemical reaction on the reaction surface up to degree of reaction near to 0.4. The rate of penetration of the chemical reaction into the kaolinite particles for this area—from the beginning to degree of reaction 0.4, is determined to be equal to 2.10⁻¹¹ m/s.     

Adenine–Au and adenine–uracil–Au. Non-conventional hydrogen bonds of the anions and donator–acceptor properties of the neutrals

This is a study of adenine–Au and adenine–uracil–Au (neutral, anionic and cationic), applying the B3LYP density-functional approach. In these systems, the interaction is directly related to the charge; so that as the metal atomic charge increases, the bond strength also increases. Neutral molecules are weakly bonded, the interaction in the case of cations is mainly electrostatic and in the case of the anions, the extra electron is localized on the metal atom and consequently, non-conventional hydrogen bonds are formed. In the case of adenine–Au (anion), the H dissociation energy is similar to the electron dissociation energy, and therefore both reactions may be possible. Moreover, the Au anionic atom modifies the hydrogen bonds of the uracil–adenine base pair. This may be significant in the study of point mutations that may occur in the Watson–Crick dimmer of nucleic basis. The electron-donator properties of these compounds are analyzed with the aid of the donator–acceptor map (DAM), previously described. Adenine–Au, uracil–Au and adenine–uracil–Au are more effective electron donors, but poorer electron acceptors than adenine, uracil and adenine–uracil. If the electron acceptor properties of carotenoids such as β-carotene and astaxanthin are compared, there are indications that astaxanthin may act as an oxidant instead of an antioxidant with the uracil–adenine base pair. The oxidation of nucleic acid bases by carotenoids may have important consequences, as oxidative damage of DNA and RNA appears to be linked to cancer. This is something that demands further studies and for this reason, work concerning the reactivity of carotenoids with DNA-nitrogen bases is in progress.     

Use of Metal Ions for the Estimation of the Efficiency of Antibody–Antigen Interactions

The applicability of Co(II), Ni(II), Fe(III), and Cr(III) ion labels to the immunochemical determination of ribonuclease, Candida albicans, Trichophyton rubrum, and Phoma betaeantigens was studied. The catalytic waves of hydrogen evolution, which occur in transition metal solutions in the presence of protein compounds, were used as analytical signals. The maximum catalytic effect depends on the pH, buffer capacity, and nature of buffer solution and on the nature of antigen to be determined. A new procedure was proposed for the immunochemical determination of the ribonuclease antigen using Co(II) ions as a label. The conditions of the formation and degradation of the antibody–antigen immune complex were found. The linear analytical range for the ribonuclease antigen was 0.005–1.0 mg/mL.