Nanometer-sized alumina coated with chromotropic acid as solid phase metal extractant from environmental samples and determination by inductively coupled plasma atomic emission spectrometry

A method for solid phase extraction of trace metals such as Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ using nanometer-sized alumina coated with chromotropic acid prior to determination by inductively coupled plasma atomic emission spectrometry (ICP-AES) has been developed. Various influencing parameters on the separation and preconcentration of trace metals, pH, flow rate, sample volume, amount of adsorbent, concentration of eluent and sorption kinetics have been studied. The detection limits for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺ and Zn²⁺ were found to be 0.14, 0.62, 0.22, 0.54, 0.27, 0.28, 0.53 and 0.38 ng ml^− 1, respectively. The adsorption capacity of the solid phase adsorption material is 10.3, 11.3, 14.5, 16.4, 15.1, 11.7, 15.4 and 16.8 mg g^− 1 for Cd²⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni^2+, Pb²⁺ and Zn²⁺, respectively. The preconcentration factor was obtained in the range of 50-100 for all studied metal ions. Coexisting ions over a high concentration range have not shown any significant effects on the determination of aforesaid metal ions. The accuracy of the proposed method was tested by standard reference materials (NIST 1643e: water, NIST 1573a: tomato leaves and NIST 1568a rice flour) and natural waters and the results obtained were in good agreement with the certified values.     

Specific Uphill Transport of Zinc as Zn(SCN)42− Ion using Na+-Dicyclohexyl-18-Crown-6 as Carrier

Sodium-dicyclohexyl- 18-crown-6 complex cation was used as carrier for the uphill transport of zinc as Zn(SCN)₄^2? complex anion. By using L-cysteine as a metal ion acceptor in the receiving phase at the optimized pH of 7.6, the amount of zinc transport through the liquid membrane after 90 min was 97.2 ± 1.0%. The selectivity and efficiency of zinc transport from aqueous solutions containing equimolar mixtures of Ag⁺, Cd²⁺ Co²⁺, Cu²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Pd²⁺, Sr²⁺, Bi³⁺, Cr³⁺ and Fe³⁺ ions was investigated. In the presence of NH₂OH.HCl as a suitable masking agent in the source phase, the interfering effect of Cu²⁺ and Pb²⁺ ions was diminished drastically.     

Sorption of heavy-metal ions and radioactive cesium by “Ultrasorb” composite sorbent

Data are given on the sorption of heavy-metal ions (Fe³⁺, Co²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) and radioactive isotope¹³⁷Cs from Ringer salt solution by Ultrasorb composite sorbent, which has two components: the modified clay mineral palygorskite (palygorskite-M) and a modified fibrous carbon sorbent of AUT-M type (UVM-Ts). Selectivity series have been determined for the sorption of these toxic metals on the basis of the calculated distribution coefficients K_d under standard conditions. It is shown that the properties of the components combine well in the material, and it is proposed for use as a treatment agent (enterosorbent) having a selective action in the treatment of diseases due to the accumulation of heavy metals and radionuclides in the body. Institute for Sorption and Endoecological Problems, National Academy of Sciences of Ukraine, 13 ul. Generala Naumova, Kiev 03164, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 36, No. 1, pp. 53–57, January–February, 2000.     

Synthesis of a Dithiocarbamate Chelate Resin and Its Oxidized form and Their Adsorption Properties for Heavy Metal Ions

A series of macroporous dithiocarbamate chelate resins, III and V, and an oxidized resin, VI, with high adsorption capacity were prepared. The influence of various reaction conditions of amination, dithiocarboxylation, and oxidation were examined. The structure and the conversion of functional groups of resins were confirmed by IR spectra and elemental analysis. The adsorption capacities of Resin II for Hg²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ are 4.40, 2.44, 1.77, and 1.36 mmol/g, respectively. The adsorption capacities of Resins V and VI for Cu²⁺. Zn²⁺, Ni²⁺, Co³⁺, Ag⁺, Hg²⁺, Cd²⁺, Pb²⁺, and Au³⁺ are 4.07–0.51 and 3.81–0.59 meq ion/g, respectively. The adsorption rate and the influence of pH on the adsorption percentage of the resins for metal ions were examined. Noble metal, transitional metal, and heavy metal ions can be quantitatively adsorbed by the resins. The adsorbed Cu²⁺, Pb²⁺, Cd²⁺, Co³⁺, and Ni²⁺ can be quantitatively eluted with 5N HNO₃, and the presence of large amounts of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ did not interfere.     

Cation analysis by thin-layer chromatography and reflectance spectroscopy : Part I. The rapid identificaiion of cations resolved on thin-layer plates

A rapid method has been devised whereby 14 cations — Al³⁺, Bi³⁺, Cd²⁺, Cr³⁺, Co²⁺, Cu²⁺, Fe³⁺, Pb²⁺, Mn²⁺, Hg²⁺, Ni²⁺, Ag⁺, Sn²⁺ and Zn²⁺ —. can be separated on one-dimensional, cellulose thin-layer plates and then identified by means of their reflectance spectra The procedure requires micro-amounts of sample and only one spray reagent.     

Complexation of metal ions with double-armed diazadithia lariat ether carrying anthracene moieties in acetonitrile–dioxane

A new 14-membered crown ether with nitrogen–sulfur donor atom carrying two anthryl groups was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-(chloromethyl) anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligand was investigated in acetonitrile–dioxane solution (1/1) by means of absorption and emission spectrometry. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constant of the novel ligand with Fe²⁺, Fe³⁺, Al³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Hg²⁺ cations. Absorption spectra show isobestic points in the spectrophotometric titration of these cations. The presence of excess of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ cations caused an enhancement of anthryl fluorescence. Especially, the enhancement in case of the interaction of Hg²⁺ and Al³⁺ cations with the ligand was pronounced.     

Extraction and preconcentration capacity of bifunctionalized diamine-thiol polysiloxane immobilized ligand system towards some divalent cations

Porous solid bi-organofunctionalized diamine-thiol polysiloxane immobilized ligand system of the general formula P-(CH₂)₃- X, (where P represents [Si-O]_n siloxane network and X represents a mixture of diamine; -NH(CH)₂NH₂ and thiol; -SH functional groups) has been prepared by hydrolytic polycondensation of TEOS with a mixture of 3-mercaptopropyltrimethoxysilane and 3- (2-aminoethylimino)propyltrimethoxysilane agents. The ligand system was evaluated for extraction and preconcentartion of a series of divalent metal ions from aqueous solutions including: Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺. Both batch and dynamic methods were used to examine maximum sorption capacity. The maximum binding capacity followed the sequence; Cu²⁺ > Pb²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ > Co²⁺ at pH 5.5. Measurement of variation of sorption of metal ions with temperature yielded negative values of ΔG° and positive values of ΔS° and ΔH° indicating a spontaneous and endothermic process of binding metal ions to the ligand system.     

Ligational behaviour of biacetylmonoxime nicotinoyl hydrazone (H2BMNH) towards transition metal ions

Summary The synthesis and characterization of Mn^II, Co^II, Ni^II, Cu^II, Zn^II, Cd^II UO ₂ ²⁺ , Cr^III and Fe^III complexes of biacetylmonoxime nicotinoyl hydrazone (H₂BMNH) are reported. Elemental analysis, molar conductance, magnetic moment and spectral (i.r., visible and n.m.r.) measurements have been used to characterize the complexes. I.r. spectral data show that the ligand behaves in a bidentate and/or tridentate manner. An octahedral structure is proposed for the Mn^II, Ni^II, Cr^III and Fe^III complexes, while a square-planar structure is proposed for both Co^II and Cu^II complexes on the basis of magnetic and spectral measurements.     

Selective and Sensitive Two New Macroacyclic Schiff base Fluorescent Turn-Off Receptors for Fe3+, DFT Calculation and Their Antibacterial Activity

Two new Macroacyclic Schiff base chemosensors (L₁ and L₂) were synthesized by the one pot condensation reaction of 2-[3-(2-formyl phenoxy)propoxy]benzaldehyde and aminophenol in a 1:2 molar ratio and were characterized by IR, NMR spectroscopy. Both Schiff bases displayed high selectivity and sensitivity towards Fe³⁺ over other metal ions in H₂O-DMF solution (Ag⁺,Cu²⁺, Ni²⁺, Zn²⁺, Mg⁺², Mn⁺², Pb⁺², Co⁺², Hg⁺², Cr⁺³, Na⁺, Ba⁺² and Cd²⁺) due to their structure including oxygen donor atoms. The test results showed fluorescence quenching of the fluorophores when Fe³⁺ was bound to the recognition units. From test results, a high selectivity for Fe³⁺ were discovered in this type of sensors, especially, the probe based on 2-aminophenol exhibited more significant quenching in fluorescence intensity compared with 4-aminophenol-based due to its rigidity structure. In addition, the structure of ligands and their antibacterial properties was investigated.     

Study on the synthesis of novel fluorescent macrocyclic sensors and their sensitive properties for Cu2+ and Fe3+ in aqueous solution

In this work, we synthesised and characterised three novel fluorescence macrocyclic sensors containing optically active dansyl groups. The studies for the interaction of the synthesised compounds with various mental ions (Li⁺, Na⁺, K⁺, Ag⁺, Mg²⁺, Ca²⁺, Ba²⁺, Pb²⁺, Zn²⁺, Co²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Cu²⁺, Mn²⁺, Cr³⁺, Al³⁺, Fe³⁺) were performed by fluorescence titration, Job’s plot, ESI-MS and DFT calculations. The results showed that the sensors 1a–1c displayed selective recognition for Cu²⁺ and Fe³⁺ ions and formed stoichiometry 1:1 complex through PET mechanism in DMSO/H₂O solution (1:1, v/v, pH 7.4 of HEPES). The binding constant (K) and detection limit were calculated.     

Über die Extrahierbarkeit von Metallverbindungen der Diphenylarsinsäure

Zusammenfassung Es wird über die Möglichkeit berichtet, Metallionen aus wäßriger Lösung mit Hilfe organischer Lösungsmittel als Verbindungen der Diphenylarsinsäure extrahieren zu können. Von den untersuchten Ionen Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ und Mg²⁺ sind mit Chloroform nur Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ und Al³⁺ extrahierbar. Mit Trichloräthylen ist praktisch nur mehr Pb²⁺ extrahierbar, während Benzol und Essigester keinerlei Extraktionswirkung zeigen. Vergleiche mit dem Verhalten aliphatischer Arsinsäuren werden angestellt.

---

Summary A report is given concerning the possibility of extracting metal ions from aqueous solution by means of organic liquids as compounds of diphenylarsinic acid. The ions investigated included Fe³⁺, Al³⁺, Bi³⁺, UO₂ ²⁺, Zn²⁺, Cr³⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺, and Mg²⁺. Of these only Pb²⁺, Bi³⁺, Be²⁺, Zn³⁺ and Al³⁺ are extractable with chloroform. With trichloro ethylene only Pb²⁺ is extractable, whereas benzene and acetic ester show no extraction action. Comparisons were made with the behavior of aliphatic arsinic acids.

---

Résumé On décrit la possibilité d'extraction d'ions métalliques à l'état de composés de l'acide diphénylarsinique, à partir de leur solution aqueuse, à l'aide d'un solvant organique. Parmi les ions étudiés, Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ et Mg²⁺, seuls Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ et Al³⁺ peuvent être extraits par le chloroforme. Le trichloréthyléne ne permet que l'extraction du Pb²⁺, cependant que le benzène et l'ester acétique ne manifestent aucune activité d'extraction. On établit une comparaison avec le comportement des acides arsiniques aliphatiques.

     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.     

Transition metal complexes derived from N-isonicotinamido-N′-benzoylthiocarbamide (H2IBTC)

Summary The synthesis and characterization of Cr^III, Mn^II, Fe^III, Co^II, Ni^II, Cu^II, Zn^II, Cd^II and UO _inf2 ^sup2+ complexes of N-isonicotinamido-_N-benzoylthiocarbamide (H₂IBTC) are reported. I.r. spectral data show that the ligand behaves in a bidentate, tridentate and/or tetradentate manner. Different stereochemistries are proposed for Cr^III, Mn^II, Fe^III, Co^II, Ni^II and Cu^II complexes on the basis of spectral and magnetic studies. The i.r. data indicate that the carbonyl oxygen of the benzoyl moiety is the backbone of chelation in most complexes.     

Ligational behaviour of a tetradentate NONS donor ligand towards some transition metal ions

Summary The synthesis and characterization of Cr^II, Mn^II, Fe^II, Co^II, Ni^II, Pd^II, Cu^II, Zn^II, Cd^II and UO ₂ ²⁺ complexes of 1-meotinoyl-4-phenyl-3-thiosemicarbazide (H₂NTS) are reported. I.r. spectral data show that the ligand behaves in a bidentate and/or tetradentate manner. An octahedral structure is proposed for the Cr^II, Fe^II and Ni^II complexes; a tetrahedral structure for the Mn^II, Co^II and Cu(NTS)·2H₂O complexes; and a square planar structure for the Pd^II and Cu(HNTS)Cl·H₂O complexes. The i.r. data suggest that the Fe^II complex contains a hydroxo bridge.     

Study of some metallic silicates as ion-exchangers

The extraction of ammine complexes of Cu²⁺, Cd²⁺, Ni²⁺, Co²⁺ and Zn²⁺ by synthesised manganese, nickel and zinc silicates has been studied at different pH and ionic concentrations in the external solution. It has been found that the uptake of the metal ion Co²⁺, Cu²⁺ and Zn²⁺ increases with increase in pH of the external solution, attains a maximum and then decreases. However, the uptake for Cd²⁺ and Ni²⁺ increases continuously. The q_A values of all the silicates increases with the increase in the concentration of the exchanging ion and its order for the investigated metal ions is Ni²⁺ < Co²⁺ < Cd²⁺ < Zn²⁺ < Cu²⁺.     

Preconcentration and Determination of Copper(II) by Novel Solid-Phase Extraction and High-Resolution Continuum Source Flame Atomic Absorption Spectrometry

Amberlite XAD-4 modified with N-para-anisidine-3,5-di-tert-butylsalicylaldimine was investigated as a new chealting sorbent for the selective separation and preconcentration of Cu(II). The metal ion was retained by chemical sorption on the modified resin, eluted by hydrochloric acid, and determined by high-resolution continuum source flame atomic absorption spectrometry. The prepared resin was characterized for the solid-phase extraction of Cd²⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ in a column. The influence of the pH, the mass of solid phase, eluent, flow rate, and sample volume was optimized. Using the optimum conditions, only Cu(II) showed quantitative sorption at the 95% confidence level, and the recoveries of the other metal ions were below 80%. A preconcentration factor 125 was obtained for Cu(II) with a limit of detection of 0.56?µg?L^?1. The method was used for the determination of Cu(II) in tap water, river water, tomato leaves, and fish. The relative standard deviation and the relative error were lower than 7%.     

Synthesis and applications of (5-substituted benzimidazolo)-benzo-15-crown-5 and 4,4′-bis-benzimidazolo-dibenzo-15-crown-5 for the colorimetric detection of Au3+

In the present work, we have reported the synthesis of benzimidazoles functionalized crown ether derivatives of 4-formyl benzo-15-crown-5/4,4′-diformyl dibenzo-15-crown-5 and substituted diamine pyridine using sulfamic acid as a catalyst in DMSO. These molecules are used for the colorimetric determination of Au³⁺ selectively among other metal cations such as Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Hg²⁺, Au³⁺ and Ag⁺ ions_.     

Experimental evidences for some unusual divalent cation complexes of valinomycin

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M ²⁺ (aq) + 1 · Sr²⁺ (nb) ⇄ 1 · M ²⁺ (nb) + Sr²⁺ (aq) taking place in the two-phase water-nitrobenzene system (M ²⁺ = Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, UO₂ ²⁺, Fe²⁺, Co²⁺, and Ni²⁺; 1 = valinomycin; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Moreover, the stability constants of the 1 · M ²⁺ complexes in water saturated nitrobenzene were calculated; they were found to increase in the order Fe²⁺ < Cd²⁺, Co²⁺ < Ni²⁺ < UO₂ ²⁺, Zn²⁺ < Cu²⁺ < Pb²⁺.     

The Synthesis of New Triazole Ligands and Determination of Complex Stability Constants with Transition Metal Cations in Aqueous Media

Six new triazole compounds were synthesized. These compounds containing the substituted benzylidenamino group were obtained by reaction of 3-(pyridine-4-yl)-5-p-tolyl-4-amino-4H-l,2,4-triazole 1 with the corresponding aldehyde. The reduced forms were prepared with NaBH₄ in methanol. The structures of the compounds were determined by IR, ¹H NMR, and ¹³C NMR spectral data, and their interaction with cations such as Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Ba²⁺, Sr²⁺, Ca²⁺, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ were investigated by using UV-visible spectrophotometry. Of the tested metal cations, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ complexed with the ligands. The complex stability constants (log ₁₀ K) were measured in slightly acidic aqueous media at 25.0±0.1 °C. These stability constants were determined by measuring the increase in solubility of the nearly insoluble ligand molecule due to complex formation with a soluble cation, and this method is discussed. It was found that the position of chlorine atoms on the benzene ring strongly affects the complexation of Cu²⁺ ion with these ligands.     

Preparation of dithiocarbamatecellulose derivatives and their adsorption properties for trace elements

Tosylcellulose was treated separately with aniline, benzylamine, n-butylamine and piperazine to give four different aminocelluloses which were further treated with carbon disulfide to furnish four dithiocarbamatecelluloses (AND, BZD, BUD and PID). A comparative study was made of their performance as adsorbents for several kinds of metal ions. PID, which has the highest degree of substitution of the dithiocarbamate group of the four derivatives obtained, was investigated for its adsorption behavior towards Ag⁺, As⁵⁺, Cd²⁺, Co²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Fe³⁺, Hg²⁺, Mn²⁺, Pb²⁺, Sb⁵⁺; Se⁴⁺, Te⁴⁺ and Zn²⁺. PID showed good adsorption characteristics with relatively large capacities for Ag⁺, Cr⁶⁺, Cu²⁺, Hg²⁺, Pb²⁺ and Se⁴⁺ ranging from 9.5 to 370 mg g^-1 of resin.