Extraction and spectrophotometric determination of cobalt with dithizone

Cobalt(II) in acetate-tartrate buffer (pH 6.0-7.3) is extracted quantitatively as cobalt(III) dithizonate with excess of dithizone in CCl(4). The molar absorptivity in the CCl(4) phase is 4.6 x 10(4) 1.mole(-1).cm(-1) at the absorption maximum 550 nm. The calibration graph is linear for 1-10 mug of cobalt in 10 ml of CCl(4) when excess of dithizone is removed by back-extraction with 0.01M aqueous ammonia. Most interferences can be overcome by (a) initial extraction with dithizone at pH 1.3, (b) selective back-extraction into hydrochloric acid (pH 1 to 2), (c) oxidation of iron and tin to iron(III) and tin(IV) and addition of fluoride to complex the former, and (d) selective reaction of nickel dithizonate with 1,10-phenanthroline in the CCl(4) phase followed by back-extraction of nickel into 0.1M acid. The method has been applied to determination of cobalt in a copper-nickel-zinc alloy and a nimonic alloy.     

Selective determination of cobalt using polyurethane foam and 2-(2-benzothiazolylazo)-2-p-cresol as a spectrophotometric reagent

The present work describes a selective, rapid and economical method for the determination of cobalt using the 2-(2-benzothiazolylazo)-p-cresol (BTAC) as a spectrophotometric reagent associated with a solid extraction on polyurethane foam. The BTAC reacts with Co(II) in the presence of Triton-X100 surfactant forming a green complex with maximum absorption at 615 nm. The reaction is used for cobalt determination within a pH range of 6.50-7.50, with an apparent molar absorptivity of 1.62 x 10(4) L mol(-1) cm(-1). Beer's Law is obeyed for a concentration of at least 1.60 microg ml(-1). A selective procedure is proposed for cobalt determination in the presence of Fe(II), Hg(II), Zn(II) and Cu(II) up to milligram levels using masking agents. Polyurethane foam is used for the preconcentration and separation of cobalt from thiocyanate media and this procedure is applied to its determination in nickel salts and steel alloys.     

Rapid extraction and spectrophotometric determination of vanadium(IV) with thiothenoyltrifluoroacetone

Thiothenoyltrifluoroacetone in carbon tetrachloride-butanol (1:1) is used for extraction and spectrophotometric determination of vanadium (IV) at pH 4.5-5. The greenish-yellow complex is measured spectrophotometrically at 450 nm. The system conforms to Beer's law over the range 2-11 mug/ml of extract. The colour of the complex is stable for at least 80 hr. Vanadium (IV) was quantitatively extracted and determined in the presence of 120:1 w/w ratios of various ions. The method was made selective by using common sequestering agents or prior extraction with tributyl phosphate, diethylammonium diethyldithiocarbamate, alpha-furildioxime or acetylacetone. The method is rapid, simple, selective and sensitive.     

Spectrophotometric determination of cobalt in a vitamin, alloys and an ore by extraction of its 3-hydroxy-2-methyl-1,4-naphthoquinone 4-oxime complex into molten naphthalene

A selective spectrophotometric method has been developed for the determination of cobalt after extraction of its 3-hydroxy-2-methyl-1,4-naphthoquinone 4-oxime (HMNQM) complex into molten naphthalene. The optimum pH range for the extraction is 5.0-7.5. The solidified naphthalene, containing the cobalt-HMNQM complex, is separated by filtration and dissolved in N,N-dimethylformamide. The absorbance is measured at 430 nm against a reagent blank. Beer's law is obeyed up to 1.90 ppm cobalt. The molar absorptivity is 2.09 x 10(4) l.mole(-1).cm(-1).     

Development of an reliable analytical method for synergistic extractive spectrophotometric determination of cobalt(II) from alloys and nano composite samples by using chromogenic chelating ligand

A synergistic simple and selective spectrophotometric method was developed for the determination of cobalt(II) with 1-(2',4'-dinitro aminophenyl)-4,4,6-trimethyl-1,4-dihydropyrimidine-2-thiol [2',4'-dinitro APTPT] as a chromogenic reagent. The proposed method has been described on the basis of synergistic effective extraction of cobalt(II) in presence of pyridine at pH range 9.5-10.2, showed orange-red coloured ternary complex having molar ratio 1:2:2 (M:L:Py). The equilibrium time is 10 min for extraction of cobalt(III) from organic phase. The absorbance of coloured organic layer in chloroform is measured spectrophotometrically at 490 nm against reagent blank. The Beer's law was obeyed in the concentration range 2.5-15 μg mL(-1) of cobalt(II) and optimum concentration range was 5-12.5 μg mL(-1) of cobalt(II) and it was evaluated from Ringbom's plot. The molar absorptivity and Sandell's sensitivity of cobalt(II)-2',4'-dinitro APTPT-pyridine complex in chloroform are 1.109×10(3) L mol(-1) cm(-1) and 0.053 μg cm(-2), respectively while molar absorptivity and Sandell's sensitivity of cobalt(II)-2',4'-dinitro APTPT complex in chloroform are 6.22×10(2) L mol(-1) cm(-1) and 0.096 μg cm(-2), respectively. The composition of cobalt(II)-2',4'-dinitro APTPT-pyridine complex (1:2:2) was established by slope ratio method, mole ratio method and Job's method of continuous variation. The ternary complex was stable for more than 48 h. The interfering effects of various cations and anions were also studied, and use of suitable masking agents enhances the selectivity of the method. The method is successfully applied for the determination of cobalt(II) in binary, synthetic mixtures and real samples. A repetition of the method was checked by finding relative standard deviation (R.S.D.) for n=5 which was 0.15%. The reliability of the method is confirmed by comparison of experimental results with atomic absorption spectrophotometer.     

Non-extractive derivative spectrophotometric determination of cobalt in neutral micellar medium

A sensitive derivative spectrophotometric method using 1-nitroso-2-naphthol has been developed for determination of trace amounts of cobalt in the presence of a neutral surfactant. Photometric parameters, viz., lambda(max), molar absorption coefficient and analytical sensitivity of the complex formed in micellar media are 420 nm, 3.18x10(4) l mol(-1) cm(-1) and 2.05 ng ml(-1), respectively. Beer's law holds from 0.20 to 3.0 mug ml(-1) of the analyte concentration. The method has a high sensitivity with a detection limit of 1.68 ng ml(-1). A selective determination of cobalt in presence of copper(II) or iron(III) using derivative spectral profiles and without any masking or pre-separation is also reported. Samples of drugs and standard alloys analysed by the proposed method yielded results comparable to those obtained using recommended procedures.     

Spectrophotometric determination of cobalt in iron-, cobalt- and nickel-base alloys

A spectrophotometric method has been developed for the accurate determination of cobalt at milligram level, based on oxidation of the cobalt(II)-EDTA complex with gold(III) chloride at pH 4.0-6.5 and 100 degrees and measurement of the absorbance of the resultant violet cobalt(III)-EDTA complex at 535 nm. The precision is not affected by the presence of several metal ions; including coloured ones such as Cu(II), Ni(II) and Fe(III). However, chromium(III) interferes since it also forms a violet complex with EDTA, but can be removed by separation with pyridine. Practical application of the method is illustrated by the determination of cobalt in alloys based on iron, cobalt and nickel. Over the cobalt range 8-52% the error ranges from 0.1 to 0.3%.     

Rapid spectrophotometric determination of cobalt after extraction using oximidobenzotetronic acid

A spectrophotometric method based on the extraction of cobalt with benzene solutions of oximidobenzotetronic acid (OBTA) is proposed for the estimation of 0.2-3.0 ppm of cobalt. The 3:1 OBTA : Co complex containing cobalt(III) has its absorption maximum at 430 nm; its molar absorptivity in benzene is 1.82 x 10(3)L. mole(-1). mm(-1). Since the blue iron(II) complex is not extracted into benzene, iron(II) and cobalt(II) can be separated and determined spectrophotometrically.     

The analysis of beryllium and beryllium oxide—IV The determination of cobalt

A method is described for the determination of cobalt in beryllium or beryllium oxide by extraction of the cobalt thiocyanate complex with acetylacetone (2:4-pentanedione). The method is accurate to ±2% or 2 μg of cobalt, whichever is greater. Of the 68 elements investigated only manganese and chromium interfere in 10 mg amounts. No interference was observed when 1g of each had been removed by ion-exchange or volatilisation (of chromium only) before extraction.     

Study of 2-(2-quinolinylazo)-5-dimethylaminobenzoic acid as a new chromogenic reagent for the spectrophotometric determination of cobalt

2-(2-Quinolinylazo)-5-dimethylaminobenzoic acid (QADMAB) is proposed as a new sensitive and selective chromogenic reagent for spectrophotometric determination of cobalt. The QADMAB reacts with cobalt in the presence of cetyl trimethylammonium bromide (CTMAB) medium to form a violet complex of molar ratio 1:2 (cobalt to QADMAB) in the pH range 3.2-5.2. The molar absorptivity of the complex is 1.28x10(5) L mol(-1) cm(-1) at 625 nm. Beer's law is obeyed in range 0.01-0.32 micro g mL(-1). The relative standard deviation for eleven replicate samples of 0.2 micro g mL(-1) is 0.76%. This method was applied to the determination of cobalt in biological samples, Vitamin B(12), alloys and water with good results.     

Extraction and spectrophotometric determination of cobalt(II) with isonitroso-5-methyl-2-hexanone

A simple and selective method is proposed for the extraction of cobalt(II) for its spectrophotometric determination using (HIMH) as an extractant. Cobalt(II) forms a yellow coloured complex with HIMH which can be extracted into chloroform. The calibration curve is rectilinear in the concentration range 0.1–5.0 μg ml⁻¹ of cobalt(II). The extracted species shows an absorption maximum at 400 nm with molar absorptivity of 1.135×10⁴ l mol⁻¹ cm⁻¹. The method has been applied for the determination of cobalt in synthetic mixtures, pharmaceutical, biological and high speed steel samples.     

Spectrophotometric determination of cobalt and nickel with Pyridine-2-Aldehyde-2-Quinolylhydrazone

Pyridine-2-aldehyde-2-quinolylhydrazone (PAQH) is a selective and sensitive reagent for cobalt or nickel. The reagent reacts with only a few metals to give coloured complexes; with the exception of palladium, the cobalt chelate is the only complex relatively stable towards protons and PAQH is a very selective reagent for cobalt. In the presence of thioglycollic acid only nickel reacts with PAQH; the chelate is extracted with chloroform and its absorbance measured at 492 nm. The high molecular extinction coefficients (30·10³ and 51·10³) permit the determination of 0.2–2 p.p.m. of cobalt and 0.1–1 p.p.m. of nickel.     

Dispersive liquid–liquid microextraction and spectrophotometric determination of cobalt in water samples

A new simple and rapid dispersive liquid–liquid microextraction has been applied to preconcentrate trace levels of cobalt as a prior step to its determination by spectrophotometric detection. In this method a small amount of chloroform as the extraction solvent was dissolved in pure ethanol as the disperser solvent, then the binary solution was rapidly injected by a syringe into the water sample containing cobalt ions complexed by 1-(2-pyridylazo)-2-naphthol (PAN). This forms a cloudy solution. The cloudy state was the result of chloroform fine droplets formation, which has been dispersed in bulk aqueous sample. Therefore, Co-PAN complex was extracted into the fine chloroform droplets. After centrifugation (2 min at 5000 rpm) these droplets were sedimented at the bottom of conical test tube (about 100 µL) and then the whole of complex enriched extracted phase was determined by a spectrophotometer at 577 nm. Complex formation and extraction are usually affected by some parameters, such as the types and volumes of extraction solvent and disperser solvent, salt effect, pH and the concentration of chelating agent, which have been optimised for the presented method. Under optimum conditions, the enhancement factor (as the ratio of slope of preconcentrated sample to that obtained without preconcentration) of 125 was obtained from 50 mL of water sample, and the limit of detection (LOD) of the method was 0.5 µg L^?1and the relative standard deviation (RSD, n = 5) for 50 µg L^?1 of cobalt was 2.5%. The method was applied to the determination of cobalt in tap and river water samples.     

The photometric determination of cobalt by extraction with b -nitroso-a-naphthol

An improved procedure has been described for the photometric determination of cobalt by extraction of the β-mtroso-α-naphthol complex with chloroform. This procedure can be applied in the presence of large amounts of foreign elements. Interfering elements are: gold, palladium, platinum and copper (above 25 mg).The method has been applied to the determination of cobalt in steels, non-ferrous alloys and nickel.     

Kinetic determination of trace cobalt(II) by visual autocatalytic indication

A highly sensitive and simple visual autocatalytic method has been developed for the determination of trace cobalt. The cobalt ion released by the oxidative decomposition of inert bis[2-(5-bromo-2-pyridylazo)-5-(N-propyl-N-sulfopropyl-amino-phenolato] cobaltate (Co(III)-5-Br-PAPS) with peroxomonosulfate acts as a catalyst for the oxidative degradation of the complex. Thus a definite time lapse of degradation is observed by the sudden disappearance of colored Co(III) complexes. The degradation time varies inversely with the logarithm of the initial concentration of cobalt(II). The determination range of cobalt(II) was from 3x10(-9) to 2x10(-7) M in the presence of 5x10(-6) M of 5-Br-PAPS. The relative standard deviation of the spot size method (10 mul) was 3.5% at 1x10(-7) M cobalt(II). This autocatalytic indicator reaction system has been successfully applied for the visual determination of urinary cobalt.     

Strontium and cesium extraction into hydrocarbons using alkyl cobalt dicarbollide and polyethylene glycols

The extraction of strontium and cesium ions from high ionic strength acid, base, and salt solutions into an organic extractant consisting of alkyl cobalt dicarbollide and polyethylene glycol (PEG) in diethylbenzene was investigated. Adding hexaethylene glycol or PEG-400 improved the strontium extraction ≥100-fold, while cesium extraction was decreased at high PEG concentrations. The extractions are rapid and selective, even in the presence of molar concentrations of sodium ion, suggesting that alkyl cobalt dicarbollide extractants are useful for the treatment of alkaline nuclear wastes. A method for the synthesis of tetra-n-hexyl(cobalt dicarbollide) is described.     

Spectrophotometric determination of cobalt with nitrosochromotropic acid

A sensitive spectrophotometric method for the determination of trace amounts of cobalt based on the complex formation with nitrosochromotropic acid in ammoniacal medium is described. After its extraction as thiocyanate complex into isobutylmethyl ketone, cobalt is stripped into nitrosochromotropic acid in ammonia buffer. The method has been applied to the determination of cobalt in mild steel, ferrous alloys and multivitamin preparations.     

Water-soluble polymers for spectrophotometric and flow injection determination of cobalt with nitroso-R-salt

The water-soluble polymers poly(ethylenimine), quaternized poly(ethylenimine), and poly-4-vinyl-(N-benzyltrimethyl) ammonium chloride were found to be able to change the kinetics of the reaction of cobalt with nitroso-R-salt and the optical density of the cobalt complex formed. The optimum pH range for the complex formation was a wide range from 1 to 10 and at pH 2 the reaction developed instantly. The calibration graph was linear in the range 0.005-2 mug ml(-1). The effective molar absorptivity coefficient of the complex was equal to (2.8+/-0.08)10(3). A spectrophotometric determination method for cobalt with nitroso-R-salt in the presence of water-soluble polymers (before and after membrane preconcentration) and a colorimetric flow injection method were developed. For the flow injection-based spectrophotometric determination, the calibration graph was linear in the concentration range of 0-4.0 mug ml(-1) cobalt with a regression coefficient of 0.9992. The relative standard deviation (R.S.D.) for the determination of 1.0 mug ml(-1) cobalt was 0.9% (ten replicate injections), and at all concentration measured, the R.S.D. of the data was below 5.0%. The proposed FI procedure was applied to river water samples after membrane preconcentration of cobalt. The limit of detection was 4 ng ml(-1).     

Study on the solid phase extraction and spectrophotometric determination of cobalt with 5-(2-benzothiazolylazo)-8-hydroxyquinolene

A highly sensitive, selective and rapid method for the determination of cobalt based on the rapid reaction of cobalt(II) with 5-(2-benzothiazolylazo)-8-hydroxyquinolene BTAHQ and the solid phase extraction of the Co(II)-BTAHQ complex with C18 membrane disks were developed. In the presence of pH = 6.4 buffer solution and cetylpyridenium chloride (CPC) medium, BTAHQ reacts with cobalt to form a deep violet complex with a molar ratio of 1:1 (cobalt to BTAHQ). This complex was enriched by the solid phase extraction with C18 membrane disks. An enrichment factor of 100 was obtained by elution of the complex from the disks with a minimal amount of isopentyl alcohol. In isopentyl alcohol medium, the molar absorptivity of the complex is 2.42 × 10⁵ L mol⁻¹ cm⁻¹ at 658 nm. Beer’s law is obeyed in the range of 0.01–0.38 μg mL⁻¹ in the measured solution. The relative standard deviation for 11 replicate samples of 0.20 μg mL⁻¹ level is 1.37%. The detection and quantification limits reach 3.1 and 9.7 ng mL⁻¹ in the original samples. This method was applied for the determination of cobalt in biological, water, soil and pharmaceutical preparation samples with good results.     

Extractive spectrophotometric determination of cobalt using Cyanex-272

Cyanex-272 forms a blue-colored complex with Co(II) in the organic phase. The complex shows three absorption maxima. The peak at 635 nm has been used for developing a spectrophotometric procedure for cobalt determination. Beer's law was found to be obeyed in the range 0.295-2.36 mg of cobalt. The nature of the extracted species was found to be CoR(2).HR. The molar absorptivity was found to be 3.07 x 10(2) l. mol(-1). cm(-1) at 635 nm. The method was applied for cobalt determination in solutions obtained from Beta Cake and a super alloy and was found to give values close to the actual ones. Easy regeneration of the reagent (Cyanex-272) for re-use is the main advantage of the present method.