Extractive separation and spectrophotometric determination of palladium and platinum with dithizone in the presence of stannous chloride

The conditions [acid used, presence of chloride and tin(II)] for the extractive separation and spectrophotometric determination of palladium and platinum as the dithizonates Pd(HDz)(2) and Pt(HDz)(2) have been examined. In the absence of stannous chloride platinum does not undergo extraction. Conditions for the separation and determination of these metals in the presence of mercury, gold and copper, which are also extracted with dithizone into carbon tetrachloride or chloroform under the conditions suitable for palladium (1M sulphuric acid/0.1M hydrochloric acid), have been defined. The mercury and gold dithizonates are formed quickly and can be removed before the palladium and platinum compounds have had time to form. They can be decomposed with iodide. Copper dithizonate is decomposed by reduction with tin(II). The proposed procedure has been applied to the determination of palladium in technical platinum metal.     

A new solvent extraction scheme for the separation of platinum,palladium, rhodium and iridium

A new scheme is proposed for the separation of platinum, palladium, rhodium and iridium in hydrochloric acid solutions, by solvent extraction. Platinum and palladium are complexed with 2-mercaptobenzothiazole and potassium iodide and simultaneously extracted into chloroform, thus separating them from rhodium and iridium. Palladium is separated from platinum by extracting its dimethylglyoxime complex into chloroform, while rhodium is separated from iridium by extracting its 2-mercaptobenzothiazole complex into chloroform after reduction with tin(II) chloride.     

Role of Dioctyl Sulfide in Micellar Preconcentration,Synthesis, and Coagulation of Gold Nanoparticles

Extraction preconcentration of gold(III) by mixed Triton N-42 plus dioctyl sulfide (DOS) micelles from acid sulfate-chloride solutions was studied. The distribution ratio increases from 200 to 1200 as the DOS concentration rises from 0 to 0.25 mol/L (positive synergetic effect). Analysis of extraction equilibria shows that mixed micelles are key contributors into gold(III) extraction compared to Triton N-42 micelles and DOS molecular species in n-decane. Introduction of DOS at the synthesis stage increases the rate constants for gold reduction by hydrazine and enhances the coagulation of nascent nanoparticle     

Studies on the extraction of platinum metals with tri-iso-octylamine from hydrochloric and hydrobromic acid: separation and determination of gold, palladium and platinum

The extraction of Pd(II), Rh(III), Ir(III), Au(III) and Pt(IV) from hydrochloric and hydrobromic acid with 5% tri-iso-octylamine solution in carbon tetrachloride has been studied. The gold extract from hydrochloric acid is yellow and absorbs at 325 nm, the palladium compound is red and absorbs at 290 nm and 467 nm, and the platinum compound is blood-red and shows absorption at 268 nm. The gold, palladium and platinum extracts from hydrobromic acid are crimson. reddish brown and blood-red, with maximum absorption at 260, 345 and 300 nm respectively. Methods have been devised for the separation of gold from platinum and for its determination and also for the simultaneous determination of palladium and platinum.     

Liquid-liquid extraction of palladium and gold by the sulphide podand 1,12-di-2-thienyl-2,5,8,11-tetrathiadodecane

The extraction properties of the sulphide podand 1,12-di-2-thienyl-2,5,8,11-tetrathiadodecane (TTD), an open-chain neutral polythioether with six sulphur donor atoms in 1,2-dichloroethane, chloroform and MIBK for Pd and Au in hydrochloric, nitric and perchloric acid media have been examined. The kinetic aspects of the extraction of palladium(II) from hydrochloric acid by TTD and dioctyl sulphide (DOS) were compared. The rate of Pd extraction with TTD is considerably higher than that with DOS, especially with chloroform. Combined use of a reducing agent and TTD enhances the extraction of gold(III) into 1,2-dichloroethane.     

Extraction of gold(III), palladium(II), and platinum(IV) by 1-[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-ylmethyl]-1<Emphasis Type="Italic">H</Emphasis>-1,2,4-triazole from hydrochloric acid solutions

The extraction of gold(III), palladium(II), and platinum(IV) with 1-[[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl]methyl]-1H-1,2,4-triazole from hydrochloric acid solutions into toluene has been studied. The extraction follows the anion-exchange mechanism. The concentration constants and thermodynamic parameters of the extraction reaction have been calculated. The reagent is proposed for use in the extraction of the sum of precious metals.     

A fire-assay and wet chemical method for the determination of palladium, platinum, gold, and silver in ores and concentrates

A method is presented for the determination of palladium, platinum, gold and silver in ores and concentrates by a fire-assay and wet chemical technique. After parting of the lead assay button with dilute nitric acid, and separation of the solution from the residue, the palladium and platinum in the solution are precipitated by the addition of stannous chloride, with tellurium as collector. The resulting precipitate is combined with the gold residue and dissolved in aqua regia, then the solution is analysed for palladium, platinum and gold by atomic-absorption spectrophotometry (AAS). Silver is determined in the original solution by AAS before the reduction step.     

The rapid isolation and determination of iridium after simultaneous liquid-liquid extraction and determination of platinum,palladium, rhodium and gold

The proposed method provides a rapid isolation of iridium form the other noble metals, as well as from Ni, Cu, Fe, Cr, Co and Na. The scheme comprises an initial removal of ruthenium and osmium by volatilization of their tetroxides followed by the simultaneous extraction of platinum, palladium, rhodium and gold as their 2-mercaptobenzothiazole—tin(II) chloride complexes into chloroform. Iridium in the raffinate is complexed by the same reagent system, after boiling, and extracted into chloroform. The extracts after evaporation of the solvent are converted to hydrochloric acid solutions and the noble metals are determined by atomic absorption spectrometry. Satisfactory results are obtained for various noble metal solutions, and for a solid platiniferous sample.     

Simultaneous determination of palladium, platinum, rhodium and gold by on-line solid phase extraction and high performance liquid chromatography with 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine as pre-column derivatization regents

In this paper, 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine (HNATR) was synthesized. A new method for the simultaneous determination of palladium, platinum, rhodium and gold ions as metal-HNATR chelates was developed using a rapid analysis column high performance liquid chromatography equipped with on-line solid phase extraction technique. The samples (Water, human urine, geological samples and soil) were digested by microwave acid-digestion. The palladium, platinum, rhodium and gold ions in the digested samples were pre-column derivatized with HNATR to form colored chelates. The Pd-HNATR, Pt-HNATR, Rh-HNATR and Au-HNATR chelates can be absorbed onto the front of the enrichment column when they were injected into the injector and sent to the enrichment column [Zorbax Stable Bound, 10 mm x 4.6 mm, 1.8 microm] with a buffer solution of 0.05 mol L(-1) phosphoric acid as mobile phase. After the enrichment had finished, by switching the six ports switching valve, the retained chelates were back-flushed by mobile phase and travelling towards the analytical column. These chelates separation on the analytical column [Zorbax Stable Bound, 10 mm x 4.6 mm, 1.8 microm] was satisfactory with 72% acetonitrile (containing 0.05 mol L(-1) of phosphoric acid and 0.1% of Triton X-100) as mobile phase. The palladium, platinum, rhodium and gold chelates were separated completely within 2.5 min. Compared to the routine chromatographic method, more then 80% of separation time was shortened. By on-line solid phase extraction system, a large volume of sample (10 mL) can be injected, and the sensitivity of the method was greatly improved. The detection limits (S/N=3, the sample injection volume is 10 mL) of palladium, platinum, rhodium and gold in the original samples reaches 1.4, 1.8, 2.0 and 1.2 ng L(-1), respectively. The relative standard deviations for five replicate samples were 2.4-3.6%. The standard recoveries were 88-95%. This method was applied to the determination of palladium, platinum, rhodium and gold in human urine, water and geological samples with good results.     

Extraction of Palladium(II), Platinum(II), and Platinum(IV) by Bisacylated Diethylenetriamine from Hydrochloric Acid Solutions

The extraction properties of bisacylated diethylenetriamine are studied in the extraction of palladium(II), platinum(II), and platinum(IV) from hydrochloric acid solutions. Optimum extraction parameters are determined. The extraction of metal ions at these parameters follows an ion-associative mechanism. The concentration constants and thermodynamic parameters of extraction reactions are calculated. The feasibility of the extraction separation of palladium and platinum from base metals is verified.     

Propiconazole and Penconazole as Effective Extractants for Selective recovery and concentration of platinum(IV) and palladium(II) from hydrochloric acid solutions formed in leaching of spent aluminoplatinum and aluminopalladium catalysts

Selective recovery and concentration of platinum(IV) and palladium(II) from hydrochloric acid solutions of varied composition was studied using commercial reagents propiconazole and penconazole as extractants. The ranges of hydrochloric acid concentrations for effective extraction and highly selective separation of platinum metals from Al(III) and Ni(II) with propiconazole (toluene with 15 vol % n-decanol as deluent) and penconazole (chloroform) were determined. The conditions for 10-fold selective concentration of platinum metals with recovery of more than 99.9% of metal ions into the organic phase were found. The conditions for quantitative (>99%) stripping of platinum(IV) with a hydrochloric acid solution of thiourea and palladium(II) with ammonia solution were determined. The results obtained can be used for optimizing the modes of selective recovery of platinum(IV) and palladium(II) from hydrochloric acid solutions formed in leaching of alumina-supported platinum-rhenium, platinum-nickel, and palladium catalysts.     

Extraction and complexing of copper(II) with benzoic acid N,N-dihexylhydrazide

The solubility and acid-base properties of benzoic acid N,N-dihexylhydrazide (BDHH) were studied. The extraction of copper(II), cobalt(II), nickel(II), zinc(II), iron(III), platinum(II), platinum(IV), chromium(III), chromium(VI), palladium(II), and molybdenum(VI) with this reagent was studied. It was shown that BDHH most efficiently extracts copper(II) from ammonia solutions and chromium(VI) from sulfuric acid solutions. In the extraction of copper(II), complexes with the [Cu(II)]: [BDHH] = 1: 1 and 1: 2 stoichiometries were found to form. The structure of the 1: 2 complex was suggested proceeding from its IR spectra. A copper(II) extraction isotherm was plotted.     

Determination of antimony in ores and related materials by continuous hydride-generation atomic-absorption spectrometry after separation by xanthate extraction

A continuous hydride-generation atomic-absorption spectrometric method for determining approximately 0.02 mug/g or more of antimony in ores, concentrates, rocks, soils and sediments is described. The method involves the reduction of antimony(V) to antimony(III) by heating with hypophosphorous acid in a 4.5M hydrochloric acid-tartaric acid medium and its separation by filtration, if necessary, from any elemental arsenic, selenium and tellurium produced during the reduction step. Antimony is subsequently separated from iron, lead, zinc, tin and various other elements by a single cyclohexane extraction of its xanthate complex from approximately 4.5M hydrochloric acid/0.2M sulphuric acid in the presence of ascorbic acid as a reluctant for iron(III). After the extract is washed, if necessary, with 10% hydrochloric acid-2% thiourea solution to remove co-extracted copper, followed by 4.5M hydrochloric acid to remove residual iron and other elements, antimony(III) in the extract is oxidized to antimony(V) with bromine solution in carbon tetrachloride and stripped into dilute sulphuric acid containing tartaric acid. Following the removal of bromine by evaporation of the solution, antimony(V) is reduced to antimony(III) with potassium iodide in approximately 3M hydrochloric acid and finally determined by hydride-generation atomic-absorption spectrometry at 217.8 nm with sodium borohydride as reluctant. Interference from platinum and palladium, which are partly co-extracted as xanthates under the proposed conditions, is eliminated by complexing them with thiosemicarbazide during the iodide reduction step. Interference from gold is avoided by using a 3M hydrochloric acid medium for the hydride-generation step. Under these conditions gold forms a stable iodide complex.     

Co-precipitation of metal dimethylglyoximates generated from biacetyl monoxime or biacetyl and hydroxylamine

A study has been made of some aspects of the co-precipitation of gold and platinum(II) and (IV) with palladium(II) precipitated from homogeneous solution initially containing biacetyl and hydroxylamine in 0.3M hydrochloric acid. The co-precipitation of nickel(II) with palladium(II) and vice versa from near neutral solutions initially containing biacetyl and hydroxylamine was also explored; the solid is enriched in the minor constituent in both cases. As with biacetyl monoxime-hydroxylamine systems, both nickel(II) and palladium(II) promote formation of dimethylglyoxime from such solutions between pH 7 and 8. Factors leading to this unusual behaviour in co-precipitation are discussed and a qualitative explanation tentatively advanced. The co-precipitation of nickel and palladium(II) is different when biacetyl monoxime solutions are used; the former comes out of solution faster than the latter irrespective of their concentration ratio. This disparity in the reaction rates can be used to separate nickel directly from palladium(II) by precipitation or extraction of the dimethylglyoximate into chloroform.     

Determination of arsenic in ores, concentrates and related materials by continuous hydride-generation atomic-absorption spectrometry after separation by xanthate extraction

A recent graphite-furnace atomic-absorption method for determining approximately 0.2 mug/g or more of arsenic in ores, concentrates, rocks, soils and sediments, after separation from matrix elements by cyclohexane extraction of arsenic(III) xanthate from approximately 8-10M hydrochloric acid, has been modified to include an alternative hydride-generation atomic-absorption finish. After the extract has been washed with 10M hydrochloric acid-2% thiourea solution to remove co-extracted copper and residual iron, arsenic(III) in the extract is oxidized to arsenic(V) with bromine solution in carbon tetrachloride and stripped into water. Following the removal of bromine by evaporation of the solution, arsenic is reduced to arsenic(III) with potassium iodide in approximately 4M hydrochloric acid and ultimately determined to hydride-generation atomic-absorption spectrometry at 193.7 nm, with sodium borohydride as reductant. Interference from gold, platinum and palladium, which are partly co-extracted as xanthates under the proposed conditions, is eliminated by complexing them with thiosemicarbazide before the iodide reduction step. The detection limits for ores and related materials is approximately 0.1 mug of arsenic per g. Results obtained by this method are compared with those obtained previously by the graphite-furnace method.     

Extractive separation of platinum from macroamounts of palladium using triphenylphosphine oxide and its successive spectrophotometric determination by the stannous chloride method

Trialkylphosphine oxides extract more effectively chloride complexes of platinum than of palladium(II). Of the examined tributylphosphine (TBPO), trioctylphosphine (TOPO), and triphenylphosphine (TPPO) oxides the latter one makes possible best separation of these metals.The extraction of platinum with TPPO from solutions containing platinum and palladium unfavorably decreases with increasing palladium concentration. Using 0.1 M TPPO solution in dichloroethane, at HCl concentration 7.5 M, it is possible to separate 2–200 μg Pt/ml at a palladium concentration not higher than 10 mg/ml.Separation of platinum from macroamounts of palladium has been combined with spectrophotometric determination of platinum by means of stannous chloride. The method has been applied to the analysis of palladium for platinum content.     

Tri-n-octylphosphine sulfide: : A selective organic extractant

Tri-n-octylphosphine sulfide (TOPS) has been investigated as the stationary phase in reversed-phase partition paper Chromatographie separations using nitric or hydrochloric acids as the mobile phase. TOPS has also been studied as an extractant for metal ions. Silver, mercury (II), and palladium (II) were found to have RF values of zero when nitric acid was used as the mobile phase. These same ions were also selectively extracted from aqueous nitric acid solutions. Gold(III), mercury(II), palladium (II), and platinum (IV) were found to have RF values of zero when hydrochloric acid was used as the mobile phase. However, only gold(III) and mercury(II) were extracted from aqueous hydrochloric acid solutions in liquid-liquid extraction systems. Several separations were successfully performed from 1 M nitric acid.     

A solvent-extraction scheme for the determination of platinum,palladium, rhodium,iridium and gold in platiniferous materials

The integrated scheme described for the determination of five noble metals, combines solvent extraction procedures with atomic absorption spectrometric finishes. It comprises an initial extraction of gold, a simultaneous extraction of platinum and palladium as iodides, and a subsequent simultaneous extraction and preconcentration of rhodium and indium as their 2-mercaptobenzothiazol? complexes. The same solvent, methyl isobutyl ketone, and the same acidity, 6 M, are used throughout the extractions. As large amounts of platinum and palladium can be extracted quantitatively as readily as small amounts, the proposed scheme is applicable to a wide range of platiniferous materials, particularly to those with extremely high Pt + Pd to Rh + Ir ratios.     

Extraction chromatographic separation of platinum(IV) from real samples and associated elements

 The extraction behavior of platinum(IV) was studied with N-n-octylaniline as a function of different parameters, such as pH, concentrations of weak acids, mineral acids, reagents and elution time. A selective method was developed for the extraction chromatographic studies of platinum(IV) and its separation from several metal ions with N-n-octylaniline (liquid anion exchanger) as a stationary phase on silica gel. The quantitative extraction of platinum(IV) was observed with 0.067 mol/L N-n-octylaniline and 0.015 mol/L ascorbic acid at pH 1.0. Metal ion was stripped from the column with water and determined spectrophotometrically with stannous chloride method. The proposed method is free from the interference of a large number of cations and anions. Platinum(IV) was separated from pharmaceutical preparations, alloys and synthetic mixtures. Mutual separation scheme was developed for platinum(IV), palladium(II) and gold(III). The log-log plot of N-n-octylaniline concentration versus the distribution ratio indicates that the probable extracted species is ［RR′NH+2 ］· Pt(C6H7O6)－3.     

The separation of platinum, palladium and gold from silicate rocks by the anion exchange separation of chloro complexes after a sodium peroxide fusion: an investigation of low recoveries

A series of experiments was undertaken to measure the recovery efficiency of platinum, palladium and gold from silicate rocks using a sodium peroxide fusion followed by anion exchange separation of the analytes as chloro complexes. Results obtained by graphite furnace atomic absorption spectrometric analysis of standard solutions prepared in dilute HCl or HCl-acidified sodium peroxide solution showed that recoveries were near quantitative. However, when standard solutions were added to an alkaline sodium peroxide solution, which was then acidified, low results were obtained for platinum and gold (46% and 76% respectively). Low and variable results were also obtained when standard solutions were added to a peridotite sample that had been dissolved by the state procedure, and in the analysis of the South African Bureau of Standards certified reference material, SARM 7. Various experiments were undertaken to investigate these low recoveries, but the reason proposed here is the formation of hydroxychloro compounds in alkaline solution which are not, on acidification with HCl, converted quantitatively to the chloro complex necessary for quantitative anion exchange separation. It is concluded that a sodium peroxide fusion followed by an anion-exchange separation does not appear to form the basis of a successful technique for the determination of platinum, palladium and gold in silicate rocks.