Adsorption and desorption of dibenzothiophene on Ag-titania studied by the complementary temperature-programmed XPS and ESR

Adsorption, desorption and structure of the surface chemical compounds formed upon interaction of dibenzothiophene (DBT) in solution of n-octane with the sulfur-selective Ag/Titania sorbent for the ultradeep desulfurization of liquid fuels was characterized by the temperature-programmed X-ray photoemission spectroscopy (XPS) and Electron Spin Resonance. Adsorption of DBT proceeds via chemisorption via the oxygen-containing surface groups. Desorption of DBT and thermal regeneration of the “spent” Ag/Titania were studied by the complementary temperature-programmed XPS and ESR from 25 °C to 525 °C, in the high vacuum vs. air. The XPS spectrum of the pure DBT is reported for the first time.     

Ultrasound-assisted oxidative desulfurization of liquid fuels and its industrial application

Latest environmental regulations require a very deep desulfurization to meet the ultra-low sulfur diesel (ULSD, 15 ppm sulfur) specifications. Due to the disadvantages of hydrotreating technology on the slashing production conditions, costs and safety as well as environmental protection, the ultrasound-assisted oxidative desulfurization (UAOD) as an alternative technology has been developed. UAOD process selectively oxidizes sulfur in common thiophenes in diesel to sulfoxides and sulfones which can be removed via selective adsorption or extractant. SulphCo has successfully used a 5000 barrel/day mobile “Sonocracking” unit to duplicate on a commercial scale its proprietary process that applies ultrasonics at relatively low temperatures and pressures. The UAOD technology estimate capital costs less than half the cost of a new high-pressure hydrotreater. The physical and chemical mechanisms of UAOD process are illustrated, and the effective factors, such as ultrasonic frequency and power, oxidants, catalysts, phase-transfer agent, extractant and adsorbent, on reaction kinetics and product recovery are discussed in this review.     

A theoretical study of thiophenic compounds adsorption on cation-exchanged Y zeolites

A density functional theory (DFT) method has been applied to study the adsorption of thiophenic compounds such as thiophene (TP), benzothiophene (BT), dibenzothiophene (DBT) on cation-exchanged Cu(I)Y, Ni(II)Y, Ce(III)Y zeolites. All of calculations were carried out by the generalized gradient approximation (GGA) with the BLYP exchange-correlation functional and DNP basis set. The calculated results indicate that the stable adsorption configuration of TP molecule adsorbed on the Cu(I)Y is the η5 adsorption mode, whereas for BT and DBT, the η1S adsorption mode was found for the both molecules. Only the η1S adsorption mode can be obtained for the three thiophenic compounds adsorbed on the Ni(II)Y. The η5 adsorption mode can be ascribed to the adsorption of thiophene molecules on the Ce(III)Y, but the competition of different adsorption modes could possibly occur during the adsorption process of BT and DBT on the Ce(III)Y. Moreover, the selectivity of TP adsorbed on the adsorbents is in the order of Cu(I)Y > Ce(III)Y > Ni(II)Y, while for BT and DBT, the order is Cu(I)Y > Ni(II)Y > Ce(III)Y.     

Effect of oxidation temperature on microstructure, mechanical behaviors and surface morphology of nanocomposite Ti-Cx-Ny thin films

Two nanocomposite Ti-C_x-N_y thin films, TiC_0.95N_0.60 and TiC_2.35N_0.68, as well as one pure TiN, were deposited at 500 °C on Si(1 0 0) substrate by reactive unbalanced dc-magnetron sputtering. Oxidation experiments of these films were carried out in air at fixed temperatures in a regime of 250-600 °C with an interval of 50 °C. As-deposited and oxidized films were characterized and analyzed using X-ray diffraction (XRD), microindentation, Newton's ring methods and atomic force microscopy (AFM). It was found that the starting oxidation temperature of nanocomposite Ti-C_x-N_y thin films was 300 °C irrespective of the carbon content; however their oxidation rate strongly depended on their carbon content. Higher carbon content caused more serious oxidation. After oxidation, the film hardness value remained up to the starting oxidation temperature, followed by fast decrease with increasing heating temperature. The residual compressive stress did not show a similar trend with the hardness. Its value was first increased with increase of heating temperature, and got its maximum at the starting oxidation temperature. A decrease in residual stress was followed when heating temperature was further increased. The film surface roughness value was slightly increased with heating temperature till the starting oxidation temperature, a great decrease in surface roughness was followed with further increase of heating temperature.     

Ultrasound-assisted oxidative process for sulfur removal from petroleum product feedstock

A procedure using ultrasonic irradiation is proposed for sulfur removal of a petroleum product feedstock. The procedure involves the combination of a peroxyacid and ultrasound-assisted treatment in order to comply with the required sulfur content recommended by the current regulations for fuels. The ultrasound-assisted oxidative desulfurization (UAOD) process was applied to a petroleum product feedstock using dibenzothiophene as a model sulfur compound. The influence of ultrasonic irradiation time, oxidizing reagents amount, kind of solvent for the extraction step and kind of organic acid were investigated. The use of ultrasonic irradiation allowed higher efficiency for sulfur removal in comparison to experiments performed without its application, under the same reactional conditions. Using the optimized conditions for UAOD, the sulfur removal was about 95% after 9 min of ultrasonic irradiation (20 kHz, 750 W, run at 40%), using hydrogen peroxide and acetic acid, followed by extraction with methanol.     

High-temperature oxidation resistance and magnetic properties of Si-doped Sm2Co17-type magnets at 500 °C

The high-temperature oxidation resistance and magnetic properties of Si-doped Sm₂Co₁₇-type magnets at 500 °C were systematically investigated. The Sm(Co_0.76, Fe_0.1, Cu_0.1, Zr_0.04)₇Si_x (x=0–0.6) magnets were prepared by the conventional powder metallurgical technique. It is found that the addition of silicon in the Sm₂Co₁₇-type magnet can remarkably improve its oxidation resistance. Moreover, a small amount of silicon addition can also increase its high-temperature intrinsic coercivity. A maximum intrinsic coercivity of 6.7 kOe at 500 °C was obtained for the Sm₂Co₁₇-type magnet with Si content x=0.4, whose high-temperature maximum energy product loss was about 2.5 times smaller than pure Sm₂Co₁₇-type magnet after oxidation at 500 °C for 100 h, indicating the enhanced oxidation resistance. Its corresponding Curie temperature and saturation magnetization are about 723.9 °C and 7.4 kG, respectively.     

Effect of annealing temperature on microstructure, hardness and adhesion properties of TiSixNy superhard coatings

A series of TiSi_xN_y superhard coatings with different Si contents were prepared on M42 steel substrates using two Ti and two Si targets by reactive magnetron sputtering at 500 °C. These samples were subsequently vacuum-annealed at 500, 600, 700, 800 and 900 °C, respectively. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), microindenter, Rockwell hardness tester and scratch tester were applied to investigate the microstructure, phase configuration, hardness and adhesion properties of as-deposited and annealed samples. The results indicated that there were two bonds, TiN and Si₃N₄, in all presently deposited TiSi_xN_y thin films, that structure was nanocomposite of nanocrystalline (nc-) TiN embedded into amorphous Si₃N₄ matrices. Annealing treatment below 900 °C played a little role in microstructure and hardness of the coatings although it greatly affected those of steel substrates. The film-substrate adhesion strength was slightly increased, followed by an abrupt decrease with increasing annealing temperature. Its value got to the maximum at 600 °C. Annealing had little effect on the friction coefficient with its value varying in the range of 0.39-0.40.     

Ultrasound-assisted oxidation of dibenzothiophene with phosphotungstic acid supported on activated carbon

Phosphotungstic acid (HPW) supported on activated carbon (AC) was applied to catalyze deep oxidation desulfurization of fuel oil with the assist of ultrasound. The sulfur-conversion rate was evaluated by measuring the concentration of dibenzothiophene (DBT) in n-octane before and after the oxidation. Supporting HPW on AC has been verified to play a positive role in UAOD process by a series of contrast tests, where only HPW, AC or a mixture of free HPW and AC was used. The influences of catalyst dose, ultrasound power, reaction temperature, H₂O₂:oil volume ratio and the reuse of catalyst on the catalytic oxidation desulfurization kinetics were investigated. The DBT conversion rate of the reaction catalyzed by supported HPW under ultrasound irradiation was higher than the summation of the reactions with HPW only and AC only as catalyst. With the increase of loading amount of HPW on AC, ultrasound power, H₂O₂:oil volume ratio and reaction temperature, the catalytic oxidation reactivity of DBT would be enhanced. The optimum loading amount of HPW was 10%, exceed which DBT conversion would no longer increase obviously. DBT could be completely converted under the optimized conditions (volume ratio of H₂O₂ to model oil: 1:10, mass ratio of the supported HPW to model oil: 1.25%, temperature: 70 °C) after 9 min of ultrasound irradiation.     

DFT-NEGF study of transport properties and NDR behavior in fused furan and thiophene dimmers

The nonequilibrium Green's function approach in combination with density-functional theory is used to perform quantum mechanical calculations of the electron transport properties of furan and thiophene dimmers. Both the molecular systems have two S-linker and translated into the Gold junction with (1 1 1) surfaces. The studied molecular junctions at zero bias voltage are HOMO-based junctions and currents through these systems are driven by hole transport. The current–voltage characteristics of the both studied molecular junctions illustrate that negative differential resistance (NDR) feature is observed over the bias voltage of 2.0 V. Higher conductivity of fused furan dimmer and NDR character have been explained by the monitoring of the transmission resonance peak across the bias window against varying bias voltages.     

Rotational spectrum and structure of asymmetric dinitrogen trioxide, N2O3

The rotational spectra of the ground vibrational state and the ν₉ = 1 torsional state have been reinvestigated and accurate spectroscopic constants have been determined. The torsional frequency, ν₉ = 70(15) cm⁻¹, has been determined by relative intensity measurements. The assignment of the infrared spectrum has been slightly revised and an accurate harmonic force field has been calculated. The equilibrium structure has been determined using different, complementary methods: experimental, semi-experimental and ab initio, leading to r(NN) = 1.870(2) Å, in particular.     

High-throughput characterization of BixY3−xFe5O12 combinatorial thin films by magneto-optical imaging technique

Bi_xY_3−xFe₅O₁₂ thin films have been grown on GGG (Gd₃Ga₅O₁₂) (1 1 1) substrates by the combinatorial composition-spread techniques under substrate temperature (T_sub) ranging from 410 to 700 °C and O₂ pressure of 200 mTorr. In order to study the effect of substrates on the deposition of Bi_xY_3−xFe₅O₁₂ thin films, garnet substrates annealed at 1300 °C for 3 h were also used. Magneto-optical properties were characterized by our home-designed magneto-optical imaging system. From the maps of Faraday rotation angle θ_F, it was evident that the Faraday effect appears only when T_sub = 430-630 °C. θ_F reaches to the maximum value (∼6°/μm, λ = 632 nm) at 500 °C, and is proportional to the Bi contents. XRD and EPMA analyses showed that Bi ions are easier to substitute for Y sites and better crystallinity is obtained for annealed substrates than for commercial ones.     

Effects of sulfur content and slab reheating temperature on the magnetic properties of fully processed nonoriented electrical steels

The effects of sulfur content and slab reheating temperature on the magnetic properties of four fully processed nonoriented electrical steels have been investigated. Four slabs of nonoriented electrical steels with sulfur content in the range of 0.0006–0.0126 wt% were reheated to 1100, 1200, and 1300 °C, respectively. Then, they were hot rolled and annealed at 700 °C, cold rolled at the same condition and annealed at 820 °C in the salt bath furnace for 1 min to simulate continuous annealing. The ac core loss, dc hysteresis loss, and ac and dc permeability were measured at 15 kG inductions. It was found that the amount of inclusions in the hot-rolled bands increased with increasing slab reheating temperature and increasing sulfur content in steels. After final annealing, grain sizes of cold-rolled steel sheets decreased with increasing sulfur content and increasing slab reheating temperature. The main preferred orientations in the final annealed steel sheets were (0 1 1) 〈1 0 0〉 and (1 1 1) 〈u v w〉 γ fiber texture. Steel sheets containing 0.0032 and 0.0060 wt% sulfur developed a more stronger (0 1 1)〈1 0 0〉 texture than other steel sheets. However, steel sheets containing 0.0126 wt% sulfur had the weakest (1 1 1)〈u v w〉 texture during slab reheating at temperatures higher than 1200 °C. Both ac core loss and dc hysteresis loss increased with increasing slab reheating temperature and increasing sulfur content in steel sheets. Both ac and dc permeability decreased with increasing slab reheating temperature and increasing sulfur content in steel sheets. If sulfur content decreased from 0.0060 to 0.0032 wt%, there were great improvements in ac core loss, dc hysteresis loss, and ac and dc permeability. However, eddy current loss was almost independent of the sulfur content and slab reheating temperature.     

Low-frequency alternative-current magnetic susceptibility of amorphous and nanocrystalline Co60Fe20B20 films

This investigation experimentally studies the low-frequency alternating-current magnetic susceptibility (χ_ac) of amorphous and nanocrystalline CoFeB films by measuring the magnetic field established by passing currents of various frequencies through such films of various thicknesses (t_f). A CoFeB film is sputtered onto a glass substrate with t_f from 100 Å to 500 Å under the following conditions: (a) As-deposited films were maintained at room temperature (RT) and (b) films were post-annealed at T_A=150 °C for 1 h. The samples thus obtained are analyzed in a magnetic field that was generated by an alternating current (AC) at various frequencies from 10 Hz to 25,000 Hz. The experimental results demonstrate that the χ_ac declines as the thickness of the as-deposited sample and the post-annealed sample (T_A=150 °C) increases because the lower coercivity (H_c) of thinner CoFeB films is similar to a soft magnetic characteristic and is associated with a higher χ_ac value. The best χ_ac value is obtained at a thickness of 100 Å under both conditions. The χ_ac value of the post-annealed sample exceeds that of the RT sample at thicknesses from 100 Å to 500 Å because the magneto crystalline anisotropy of the post-annealed sample yields the highest χ_ac value at the optimal resonance frequency (f_res), at which the spin sensitivity is maximal. The X-ray diffraction patterns (XRD) of as-deposited CoFeB films reveal their amorphous structure. The XRD results for the post-annealed films include a main peak at 2θ=44.7° from the body-centered cubic (BCC) nanocrystalline CoFe that indicated a (110) textured structure. Post-annealing treatment caused that the amorphous structure to become more crystalline by a thermally driven process, such that the χ_ac value of the post-annealed sample exceeded that of the RT sample. This experimental result demonstrates that the χ_ac value decreased as the thickness of the thin film increased. Finally, the CoFeB thin films had the best χ_ac at low frequency (<50 Hz) following post-annealing treatment. The results obtained under the two conditions indicate that the maximum χ_ac value and the optimal f_res of a 100 Å-thick CoFeB thin film were 1.6 and 30 Hz, respectively, following post-annealing at T_A=150 °C for 1 h, suggesting that a 100 Å-thick CoFeB thin film that has been post-annealed at T_A=150 °C can be utilized as a gage sensor and in transformer applications at low frequencies.     

Fabrication of FeSe1−x superconducting films with bulk properties

We have fabricated high-quality FeSe_1−x superconducting films with a bulk T_c of 11–12 K on different substrates, Al₂O₃(0 0 0 1), SrTiO₃(1 0 0), MgO(1 0 0), and LaAlO₃(1 0 0), by using a pulsed laser deposition technique. All the films were grown at a high substrate temperature of 610 °C, and were preferentially oriented along the (1 0 1) direction, the latter being to be a key to fabricating of FeSe_1−x superconducting thin films with high T_c. According to the energy dispersive spectroscopy data, the Fe:Se composition ratio was 1:0.90 ± 0.02. The FeSe_1−x film grown on a SrTiO₃ substrate showed the best quality with a high upper critical magnetic field [H_c2(0)] of 56 T.     

In situ growth stresses during the phase separation of immiscible FeCu thin films

This paper addresses the in situ growth stress evolution and post-growth stress relaxation during the phase separation of immiscible Fe_0.51Cu_0.49 thin films at various in situ deposition temperatures. Each film was sputter-deposited onto a 10 nm Si₃N₄ underlayer that was grown on top of Si [0 0 1] substrate at 25 °C, 145 °C, 205 °C, 265 °C or 325 °C. The thin film stress was measured using a wafer curvature technique. The in situ growth stress increased in compression with increasing substrate temperature. The stress relaxation of the Fe_0.51Cu_0.49 was found to have a linear increase with the inverse grain size for films deposited at temperatures greater than 205 °C. The stress state was correlated to the films’ phase and morphology by X-ray diffraction, (scanning) transmission electron microscopy and atomic force microscopy techniques.     

Effects of thermo-hygro-mechanical densification on the surface characteristics of trembling aspen and hybrid poplar wood veneers

The effect of thermo-hygro-mechanical (THM) densification temperature on the surface color, roughness, wettability, and chemical composition of trembling aspen (Populus tremuloides) and hybrid poplar (Populus maximowiczii × P. balsamifera) veneers was investigated. Veneers were subjected to four THM densification temperatures (160 °C, 180 °C, 200 °C, and 220 °C). Veneer color darkened with increasing THM densification temperature. Surface roughness decreased between 160 °C and 200 °C. Wettability decreased after THM densification, but no significant difference was found between treated specimens. ATR-FTIR and XPS results confirmed that THM densification caused major chemical changes in veneer surfaces, and more pronounced at temperatures higher than 160 °C.     

Influence of low Co substitution on magnetoelastic properties of HoFe11Ti intermetallic compound

The thermal expansion and magnetostriction of HoFe_11−xCo_xTi (x=0, 0.3, 0.7 and 1) intermetallic compounds were measured, using the strain gauge method in the temperature range 77–590 K under applied magnetic fields up to 1.5 T. Results show that for samples with x=0 and 0.3, both linear thermal expansion and linear thermal expansion coefficient exhibit anomalies below the Curie temperature. Below room temperature, the spontaneous volume magnetostriction decreases with Co content. For all compounds studied, the anisotropic magnetostriction shows similar behaviour in the measured temperature range. The magnetostriction compensation occurs above room temperature in all samples. The volume magnetostriction shows a linear dependence on the applied field and by approaching the Curie temperature this trend changes to parastrictive behaviour. The results of the spontaneous magnetostriction are discussed based on the local magnetic moment model. The contribution of magnetostriction attributed to the magnetic sublattices R and T (Fe or Co) is discussed.     

Synthesis and characterization of vanadium nanoparticles on activated carbon and their catalytic activity in thiophene hydrodesulphurization

Vanadium nanoparticles (∼7 nm) stabilized on activated carbon were synthesized by the reduction of VCl₃·3THF with K[BEt₃H]. This material was characterized by inductive coupled plasma-atomic emission spectroscopy (ICP-AES), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analyses. The catalytic performance of the carbon-supported vanadium was studied using thiophene hydrodesulfurization (HDS) as model reaction at 300 °C and P = 1 atm. The catalytic activity of the vanadium carbide phase on the activated carbon carrier was more significant than that of the reference catalysts, alumina supported NiMoS. The method proposed for the synthesis of such a catalyst led to an excellent performance of the HDS process.     

Preparation of strontium hexaferrite film by pulsed laser deposition with in situ heating and post annealing

Strontium hexaferrite (SrFe₁₂O₁₉) films have been fabricated by pulsed laser deposition on Si(1 0 0) substrate with Pt(1 1 1) underlayer through in situ and post annealing heat treatments. C-axis perpendicular oriented SrFe₁₂O₁₉ films have been confirmed by X-ray diffraction patterns for both of the in situ heated and post annealed films. The cluster-like single domain structures are recognized by magnetic force microscopy. Higher coercivity in perpendicular direction than that for the in-plane direction shows that the films have perpendicular magnetic anisotropy. High perpendicular coercivity, around 3.8 kOe, has been achieved after post annealing at 500 °C. Higher coercivity of the post annealed SrFe₁₂O₁₉ films was found to be related to nanosized grain of about 50–80 nm.