Investigating the thermodynamic causes behind the anomalously large shifts in pKa values of benzoic acid-modified graphite and glassy carbon surfaces

The difference between the values of 4-carboxyphenyl groups, covalently attached to either graphite (BAcarbon) or glassy carbon (BA-GC) surfaces, and benzoic acid in solution is explored using potentiometric titration and cyclic voltammetry. In solution, benzoic acid has a pKa of 4.20 at 25 degrees C. However, the observed pKa value on the graphitic surfaces shows significant deviations, with BAcarbon exhibiting a large shift to higher pKa values (pKa = 6.45) in contrast to BA-GC, which is shifted to lower pKa values (pKa = 3.25). Potentiometric titrations at temperatures between 25 and 50 degrees C allowed us to determine the surface pKa of these materials at each temperature studied and hence to determine the enthalpy, entropy, and Gibbs' energy changes associated with the ionization of the carboxylic acid groups. It was found that the enthalpic contribution is negligible and that the changes in surface pKa values are entropically controlled. This suggests that solvent ordering/disordering around the interface strongly influences the observed pKa value, which then reflects the relative hydrophobicity/hydrophilicity of the different graphitic surfaces.     

On the nature of the Brønsted acidic groups on native and functionalized mesoporous siliceous SBA-15 as studied by benzylamine adsorption from solution

The concentration and Br?nsted acidity of surface silanol groups on mesoporous silica (SBA-15) has been studied by following the adsorption of benzylamine, BA, from water as a function of pH. The adsorbed amount of BA from water was compared to the maximum amount of BA that could be adsorbed from cyclohexane. Furthermore, the surface concentration and acidity of carboxylic acid functions on surface-functionalized SBA-15 was also studied, which allowed the relative surface concentration of remaining silanols to be obtained. Two types of silanols can be identified, where about 1/5 of the silanols have a pKa 相似文献   

Correlations and predictions of carboxylic acid pKa values using intermolecular structure and properties of hydrogen-bonded complexes

Density functional theory calculations have been preformed on a series of hydrogen-bonded complexes of substituted aliphatic and aromatic carboxylic acids with ammonia. Molecular properties, particularly those related to hydrogen bonding, have been carefully examined for their interdependence as well as dependence on the acidity of the acid. The bond length and stretching frequency of the hydroxyl group and the hydrogen-bond length and energy of the complex are shown to be highly correlated with each other and are linearly correlated with available literature pKa values of the carboxylic acids. The linear correlations resulting from the fit to the available pKa values can be used to predict the pKa values of similar carboxylic acids. The pKa values so predicted using the different molecular properties are highly consistent and in good agreement with the literature values. This study suggests that calculated molecular properties of hydrogen-bonded complexes allow effective and systematic prediction of pKa values for a large range of organic acids using the established linear correlations. This approach is unique in its capability to determine the acidity of a particular functional group or the local acidity within a large molecular system such as a protein.     

低阶煤中含氧官能团分布的研究

采用化学法测定了四种典型中国低阶煤中羧基、醇羟基、酚羟基、甲氧基和羰基含氧官能团。其中,羧基的定量分析采用醋酸钙溶液和pH值为8.3的缓冲溶液进行,分析了测定条件对羧基和酸性含氧官能团测定结果的影响。结果表明,在N₂气氛下比空气条件下测定羧基含量准确,褐煤中羧酸根的主要存在形式为羧酸盐,酸洗后煤样中酚羟基的测定值随着离子交换溶液pH值的增加而增大;褐煤中的含氧官能团主要是羧基和羟基,分别占总氧量的34.49%和34.79%;在不同低阶煤中存在不同含量的羰基,甲氧基含量较小。     

Ozonation of activated carbons: Effect on the adsorption of selected phenolic compounds from aqueous solutions

The impact of ozonation on textural and chemical surface characteristics of two granular activated carbons (GAC), namely F400 and AQ40, and their ability to adsorb phenol (P), p-nitrophenol (PNP), and p-chlorophenol (PCP) from aqueous solutions have been studied. The porous structure of the ozone-treated carbons remained practically unchanged with regard to the virgin GAC. However, important modifications of the chemical surface and hydrophobicity were observed from FTIR spectroscopy, pH titrations, and determination of pH(PZC). As a rule, the ozone treatment at either room temperature (i.e., about 25 degrees C) or 100 degrees C gave rise to acidic surface oxygen groups (SOG). At 25 degrees C primarily carboxylic acids were formed while a more homogeneous distribution of carboxylic, lactonic, hydroxyl, and carbonyl groups was obtained at 100 degrees C. The experimental isotherms for phenolic compounds on both GAC were analyzed using the Langmuir model. Dispersive interactions between pi electrons of the ring of the aromatics and those of the carbon basal planes were thought to be the primary forces responsible for the physical adsorption whereas oxidative coupling of phenolic compounds catalyzed by basic SOG was a major cause of irreversible adsorption. The exposure of both GAC to ozone at room temperature decreased their ability to adsorb P, PNP, and PCP. However, when ozone was applied at 100 degrees C adsorption was not prevented but in some cases (P and PNP on F400) the adsorption process was even enhanced.     

Chromatographic properties of the ion-exclusion column IonPac ICE-AS6 and application in environmental analysis. Part I: Chromatographic properties

The chromatographic performance of the Dionex IonPac ICE-AS6 ion exclusion column is investigated. Therefore, capacity factors, efficiency, peak symmetry, resolution, and selectivity are determined for various mono- and polyfunctional aliphatic carboxylic acids under selected chromatographic conditions. Except for the stronger acids (pKa1 < 3.75), the highest chromatographic efficiency is achieved at a column temperature of 40 or 50 degrees C, and peak shape is found to be optimal at approximately 60 degrees C. The separation of the stronger acids is favored by an eluent pH below 3.0 and column temperatures below 40 degrees C. The maximal effective plate numbers range between 126 (tartronic acid) and 6380 (4-oxovaleric acid). Hydroxy-substituted acids are less retained and less influenced by temperature changes than the unsubstituted compounds. It is estimated that size exclusion effects take part in the separation of aldonic acids. The addition of 1% isopropanol to the acidic eluent increases the chromatographic efficiency generally, whereas higher concentrations reduce the retention of several acids drastically.     

Theoretical study of hydrogen-bonded complexes of chlorophenols with water or ammonia: Correlations and predictions of pKa values

A simple practical method for predicting the acidity constants (as pKa values) of chlorophenols is proposed based on density functional theory calculations of a series of hydrogen-bonded complexes of phenol and 19 different congeners of chlorophenol, with a single probe molecule, either water or ammonia. Relevant structural parameters and molecular properties of these complexes, primarily involving the acidic hydroxyl group, are examined and plotted against the known pKa values of 14 chlorophenols and phenol. Strong linear correlations are found for these compounds. Such correlations are used to determine the pKa values of five chlorophenols whose experimental acidities have large uncertainties. Similar predicted pKa values are obtained by using different structural parameters and molecular properties for the complexes with either probe molecule. The study may be extended to determine the acidity of other compounds with a single acidic functional group.     

Determination of dissociation constants of 99mTechnetium radiopharmaceuticals by capillary electrophoresis

Capillary electrophoresis was applied to investigate pKa values of 99mTc radiotracers used in nuclear medicine. Therefore, the protonation equilibria of the carboxyl groups of 99mTc-mercaptoacetylglycylglycylglycine (99mTc-MAG3) and 99mTc-ethylenecysteine dimer (99mTc-EC) were studied by pH-dependent determination of electrophoretical velocities. 99mTc-ethylenecysteine dimer diethyl ester (99mTc-ECD) was used as a non-protonable standard. The capillary electrophoresis system was equipped with a radioactivity detector. Measurements were performed using a pressure-driven capillary zone electrophoresis which allowed runs even in the low pH range. For the determination of pKa values, the electrophoretical velocities of the analytes were referred to the electrophoretical velocities of tetraphenyle arsonium chloride as a positively charged marker. Calculation of pKa values was accomplished by non-linear curve fitting of both structure-based equilibria equations and sigmoidal decay functions to the experimental data. 99mTc-MAG3 was shown to have a carboxyl group pKa value of 4.22. The value for the carboxyl groups of 99mTc-EC is 2.90 (determined by structure-based equilibria equations), which represents a common value for both carboxyl groups. By the use of sigmoidal functions, similar values were elucidated. As expected, 99mTc-ECD shows no protonation step.     

Site-specific carbon isotope analysis of aromatic carboxylic acids by elemental analysis/pyrolysis/isotope ratio mass spectrometry

Site-specific carbon isotope composition of organic compounds can provide useful information on their origin and history in natural environments. Site-specific isotope analyses of small amounts of organic compounds (sub-nanomolar level), such as short-chain carboxylic acids and amino acid analogues, have been performed using gas chromatography/pyrolysis/isotope ratio mass spectrometry (GC/pyrolysis/IRMS). These analyses were previously limited to volatile compounds. In this study, site-specific carbon isotope analysis has been developed for non-volatile aromatic carboxylic acids at sub-micromolar level by decarboxylation using a continuous flow elemental analysis (EA)/pyrolysis/IRMS technique. Benzoic acid, 2-naphthylacetic acid and 1-pyrenecarboxylic acid were pyrolyzed at 500-1000 degrees C by EA/pyrolysis/IRMS to produce CO2 for delta13C measurement of the carboxyl group. These three aromatic acids were most efficiently pyrolyzed at 750 degrees C. Conventional sealed-tube pyrolysis was also conducted for comparison. The delta13C values of CO2 generated by the continuous flow technique were within 1.0 per thousand of those performed by the conventional technique, indicating that the new continuous flow technique can accurately analyze the carbon isotopic composition of the carboxyl group in aromatic carboxylic acids. The new continuous flow technique is simple, rapid and uses small sample sizes, so this technique will be useful for characterizing the isotopic signature of carboxyl groups in organic compounds.     

Accurate pKa determination for a heterogeneous group of organic molecules.

Single-molecule studies that allow to compute pKa values, proton affinities (gas-phase acidity/basicity) and the electrostatic energy of solvation have been performed for a heterogeneous set of 26 organic compounds. Quantum mechanical density functional theory (DFT) using the Becke-half&half and B3LYP functionals on optimized molecular geometries have been carried out to investigate the energetics of gas-phase protonation. The electrostatic contribution to the solvation energies of protonated and deprotonated compounds were calculated by solving the Poisson equation using atomic charges generated by fitting the electrostatic potential derived from the molecular wave functions in vacuum. The combination of gas-phase and electrostatic solvation energies by means of the thermodynamic cycle enabled us to compute pKa values for the 26 compounds, which cover six distinct chemical groups (carboxylic acids, benzoic acids, phenols, imides, pyridines and imidazoles). The computational procedure for determining pKa values is accurate and transferable with a root-mean-square deviation of 0.53 and 0.57 pKa units and a maximum error of 1.0 pKa and 1.3 pKa units for Becke-half&half and B3LYP DFT functionals, respectively.     

Carboxyl groups in pre-treated regenerated cellulose fibres

The influence of peroxide bleaching and slack-mercerization on the amount of acidic groups in regenerated fibres (viscose, modal and lyocell) were studied. Conductometric titration was used to determine the total content of acidic carboxylic groups. Polyelectrolyte titration was used for surface and total charge determination, and to obtain information about the charge distribution and accessibilities of charged groups. Changes in fibre crystallinity to pre-treatment processes were characterized using iodine sorption (Schwertassek method) and correlated to treatments and the amount of carboxylic groups. For all three types of fibres the amount of accessible carboxyl groups was lowered by an increase in the degree of crystallinity. Bleaching with hydrogen peroxide causes some oxidative cellulose damage and, therefore, a larger amount of carboxyl groups (presumably formed at the end of cellulose chains). Slack-mercerization did not significantly change the total amount of acidic groups in the fibres, but their accessibility to cationic polyelectrolytes, in particular to polymers with high molecular weight was substantially lowered. Lidija Fras Zemljič, Zdenka Peršin, and Karin Stana Kleinschek are the members of the European Polysaccharide Network of Excellence (EPNOE).     

In-Block Derivatization of Herbicidal Carboxylic Acids by Pentafluorobenzyl Bromide

Abstract

Herbicidal carboxylic acids were analyzed via ECD gas chromatography of their pentafluorobenzyl esters. The derivatives were formed by direct injection of a mixture of the acids and pentafluorobenzyl bromide in acetone; yields showed marked dependence on pKa of the acids. Carboxylic acids which have pKa values greater than 4.5 yielded the corresponding derivatives in poor yield unless triethylamine is included in the mixture. The procedure is fast and particularly convenient for low-level screening, identification and analysis of highly acidic chlorobenzoic, chlorophenoxyalkanoic, and arylacetic acids in the presence of less acidic carboxylic acids and phenols.     

Preparations, characterizations, and structures of (biimidazole)dihalobis(triphenylphosphine)rhenium(III) salts: strong ion-pairing and acid-base properties

Two-electron reduction occurs when the Re(V) precursors ReOX3(PPh3)2 and ReO(OEt)X2(PPh3)2 are reacted with biimidazole (biimH2) in boiling chloroform, affording rhenium(III) cationic complexes of the type cis,trans-[ReX2(PPh3)2(biimH2)]X with X = Cl, Br, and I. Crystal structures are determined for the compounds with the three halogens, as well as for the [ReCl2(PPh3)2(biimH2)](benzoate) salt. In all cases, the counterion is attached to the complex cation via hydrogen bonding with the N-H groups of coordinated biimidazole. Variable-temperature 1H NMR spectroscopy shows that a mixture of [ReCl2(PPh3)2(biimH2)](benzoate) and [ReCl2(PPh3)2(biimH2)]Cl is in slow exchange below -50 degrees C in CD2Cl2, indicating that ion pairing is retained in solution. Both N-H groups can be deprotonated with sodium methoxide, and their acidities are evaluated from UV-visible spectra. Competition between monodeprotonated [ReCl2(PPh3)2(biimH)] and various carboxylic acids reveals that the acidity of the first N-H proton corresponds to that of acetic acid (pKa(aq) approximately 4.8). By a similar competitive reaction between bis-deprotonated [ReCl2(PPh3)2(biim)]- and phenols, the second acidity is estimated to be close to that of phenol (pKa(aq) approximately 9.8).     

Capillary zone electrophoresis of cationic and anionic drugs in methanol

The actual mobilities and dissociation constants of acidic and basic pharmaceuticals were determined in methanol. Actual mobilities were derived from the dependence of the effective mobilities of the analytes on the pH of the methanolic background electrolyte solution (pH(MeOH)). The pKa values of the pharmaceuticals in methanol (pK(a,MeOH)) were calculated by non-linear curve fitting to the measured mobility values. It was found that the shift in pKa value (when compounds were transferred from water to methanol) increased with the acidity of the analyte. The average pKa shift for compounds exhibiting acidic properties in water was ca. 5.5 units, and the shift for basic compounds about 2 units. As was shown for a mixture of beta-blockers, the calculated actual mobilities and pKa values can be utilised in the optimisation of pH conditions for separation. The practical value of the method was illustrated by the analysis of urine samples.     

Effects of carboxyl groups on the adsorption behavior of low-molecular-weight substances on a stainless steel surface

The adsorption isotherms of various carboxylic acids and several amines on a stainless steel surface were taken as a function of pH and the ionic strength of the solution at 30 degrees C. In particular, the effect of the number of carboxyl groups on the adsorption behavior was investigated. Monocarboxylic acids such as benzoic acid and n-butyric acid were reversibly adsorbed on the stainless steel particles and showed a Langmuir-type adsorption isotherm, i.e., Q=KqmC/(1+KC), where Q and C are, respectively, the amount of adsorbate adsorbed and the equilibrium concentration in the bulk solution, qm, the maximum adsorbed amount, and K is the adsorption equilibrium constant. Carboxylic acids having plural carboxyl groups had much higher affinity to the surface and were adsorbed in both reversible and irreversible modes. The adsorption isotherms for the carboxylic acids having plural carboxyl groups could be expressed by a modified Langmuir-type adsorption isotherm, i.e., Q=q(irrev)+Kq(rev)C/(1+KC), where q(irrev) and q(rev) are, respectively, the maximum amounts adsorbed irreversibly and reversibly. The K and q(irrev) values increased with an increase in the number of carboxyl groups except for isophthalic acid and terephthalic acid. On the basis of the pH dependencies of K, qm, q(irrev), and q(rev) as well as the surface properties of the stainless steel, both reversible and irreversible adsorptions were considered to occur through the electrostatic interaction between negatively charged carboxyl groups and the positively charged sites on the surface. The dependency of the q(irrev) value on ionic strength was discussed on the basis of the differences in their adsorbed state with the interaction forces to the surface and repulsive forces among the adsorbed molecules. The adsorption of amine components was quite weak. The RA-IR and molecular dynamics calculation were done to investigate the adsorption states of phthalic acid, trimellitic acid, and mellitic acid.     

An acidity scale of 1,3-dialkylimidazolium salts in dimethyl sulfoxide solution

Equilibrium acidities of 16 1,3-dialkylimidazolium-type ionic liquid (IL) molecules (1-16) were systematically measured by the overlapping indicator method at 25 degrees C in dimethyl sulfoxide (DMSO) solution. The pKa values were observed to range from 23.4 for IL 12 to 19.7 for IL 6 (Tables 1 and 2), responding mainly to structural variations on the cation moiety. Excellent agreement between the spectrophotometrically determined pKa and that derived from NMR titration for 1,3,4,5-tetramethylimidazolium bis(trifluoromethanesulfonyl)imide (12) and the close match of the obtained pK values with the reported data in literature provide credence to the acidity measurements of the present work. The substituent effects at the imidazolium ring and the effects of counterions on the acidities of ionic liquids are discussed.     

Solubilization of amphiphilic carboxylic acids in nonionic micelles: determination of partition coefficients from pKa measurements and NMR experiments

The solubilization of octylamidotartaric acid (C8T) and octanoic acid (C8C) in Triton X-100 and Brij 58 nonionic micelles has been studied by pHmetric and 1H NMR self-diffusion experiments. As both C8C and C8T exhibit acid-base properties, a distinction between the partition of the neutral acidic form, in terms of the partition coefficient KPH, and the partition of the charged basic form, in terms of the partition coefficient KP-, has been made. The acidity constants, Ka, of C8T and C8C in the presence of micelles have been evaluated from pHmetric experiments. For both solutes, an increase in the pKa is observed in micellar media due to the difference in the partition of acidic and basic forms of the solutes. A model has been developed to determine KPH and KP- from the pKa shifts observed. The values obtained by this pKa shift modeling method and those from self-diffusion coefficient measurements are in good agreement. The acidic form of C8C is incorporated to a larger extent into the Brij 58 micelles than the acidic form of C8T, whereas the opposite trend is observed for the basic forms. Both the acidic and basic forms of C8T are more easily incorporated into Brij 58 micelles than into Triton X-100 micelles. The influence of the structure of the polar head on the solubilization properties is demonstrated. Moreover, evidence for the localization of the solutes in the micelles is obtained from the comparison of the partition coefficients and from 1H NMR data.     

Synthesis and acid-base properties of (1H-benzimidazol-2-yl-methyl)phosphonate (Bimp2-). Evidence for intramolecular hydrogen-bond formation in aqueous solution between (N-1)H and the phosphonate group

The synthesis of (1H-benzimidazol-2-yl-methyl)phosphonic acid, H2(Bimp)+/-, is described: 2-chloromethylbenzimidazole was reacted with ethylchloroformate to give 1-carboethoxy-2-chloromethylbenzimidazole which was treated with trimethyl phosphite and after hydrolysis with aqueous HBr H2(Bimp)+/- was obtained. In H2(Bimp)+/- one proton is at the N-3 site and the other at the phosphonate group; both acidity constants were determined in aqueous solution by potentiometric pH titrations (25 degrees C; I = 0.1 M, NaNO3) and this furnished the pKa values of 5.37 +/- 0.02 and 7.41 +/- 0.02, respectively. The acidity constant for the release of the primary proton from the P(O)(OH)2 group of H3(Bimp)+ was estimated: pKa = 1.5 +/- 0.2. Moreover, Bimp2- can be further deprotonated at its neutral (N-1/N-3)H site to give the benzimidazolate residue, but this reaction occurs only in strongly alkaline solution (KOH); application of the H_ scale developed by G. Yagil (J. Phys. Chem., 1967, 71, 1034) together with UV spectrophotometric measurements gave pKa = 14.65 +/- 0.12. Comparisons with acidity constants taken from the literature show that this latter pKa value is far too large and this allows the conclusion that an intramolecular hydrogen bond is formed between the (N-1/N-3)H site and the phosphonate group of Bimp2-; the formation degree of this hydrogen-bonded isomer is estimated to be 98 +/- 2%. The general relevance of this and the other results are shortly discussed and the species distribution for the Bimp system in dependence on pH is provided.     

谷胱甘肽与衡土离子作用的13^C NMR研究

本文利用顺磁稀土离子的诱导化学位移变化的性质, 研究了多官能团配体谷胱甘肽(GSH)与稀土的配位作用。在水溶液中GSH通过分子两端的羧基负离子与稀土形成遥爪配位结构。谷氨酸和甘氨酸羧基与Eu^3+的配位稳定常数分别为12.5±0.1L.mol和100.0±0.5L/mol。从13^C化学位移的pH变化曲线求得谷氨酸和甘氨酸羧基解离的pK~a值分别为2.20±0.02和3.50±0.04。对Dy^3+、Ho^3+、Er^3+、Tm^3+和Yb^3+作用下, GSH的13^C位移数据分析表明, 配体与这些离子形成同构的配合物, 分子两端羧基均可能以双齿形式与稀土配位。     

Ab initio procedure for aqueous-phase pKa calculation: the acidity of nitrous acid

We present an ab initio procedure for accurately calculating aqueous-phase pKa values and apply it to study the acidity of nitrous acid (HNO2, or HONO). The aqueous-phase pK(a) of nitrous acid was obtained from calculated gas-phase acidities and solvation free energies via a thermodynamic cycle and the solvation model chemistry of Barone et al. (J. Chem. Phys. 1997, 107, 3210). Solvation free energies were calculated at the HF/6-31G(d) level using the dielectric-polarizable continuum and the integral equation formalism-polarizable continuum solvent models (D-PCM and IEF-PCM, respectively), with the D-PCM model yielding the most accurate pKa values. For HF free energies of solvation, significant improvements in accuracy could be made by moving to the larger 6-311++G(3df,3pd) and aug-cc-pVQZ basis sets. Solvation free energies were also calculated using the density functional theory (DFT) methods B3LYP, TPSS, PBE0, B1B95, VSXC, B98 and O3LYP, with the most accurate methods being TPSS and VSXC, which provided average errors of less than 0.11 pKa units. Solvation free energies calculated with the different DFT methods were relatively insensitive to the basis set used. Our theoretical calculations are compared with experimental results obtained using stopped flow spectrophotometry. The pKa of nitrous acid was measured as 3.16 at 25 degrees C, and the enthalpy and entropy of nitrous acid dissociation were calculated from measurements as 6.7 kJ mol(-1) and -38.4 J mol(-1) K(-1), respectively, between 25 and 45 degrees C. The UV/visible absorption spectra of the nitrite ion and nitrous acid were also examined, and molar extinction coefficients were obtained for each.