Effect of acoustic field on heat transfer in a sound assisted fluidized bed of fine powders

The fluidized beds are widely used in a variety of industries where heat transfer properties of the fluidized system become important for successful operation. Fluidized are preferred in heat recovery processes because of their unique ability of rapid heat transfer and uniform temperature. Fine powders handling and processing technologies have received widespread attention due to increased use of fine powders in the manufacture of drugs, cosmetics, plastics, catalysts, energetics and other advanced materials. A better understanding of fluidization behavior of fine powders is of great importance in applications involving heat transfer, mass transfer, mixing, transporting and modifying surface properties etc. The difficulty in putting the fine powders in suspension with the fluidizing gas is related to the cohesive structure and to the physical forces between the primary particles. The sound waves agitate bubbling and this results in improving solids mixing in the fluidized bed. The improved solids mixing results in uniform and smooth fluidization, which leads to better heat transfer rates in the fluidized bed.     

Local heat transfer coefficients around a horizontal heated tube immersed in a gas fluidized bed

The heat transfer characteristics around a single horizontal heated tube immersed in air fluidized bed was investigated, to clarify the mechanism of heat transfer in a fluidized bed heat exchanger. The local heat transfer coefficient around the tube was measured at various fluidization velocities and five different solid particles. The experimental values of the local heat transfer coefficient at the minimum fluidization velocity condition were correlated with the particle size in two empirical equations. The predicted results were in good agreement with the experiment data.     

Heat and mass transfer study in fluidized bed granulation-Prediction of entry length

Fluidized bed granulation is a process by which granules or coated particles are produced in a single piece of equipment by spraying a binder as solution, suspension, or melt on the fluidized powder bed. Heat and mass transfer correlation useful for designing a granulator has been derived based on the equivalence of evaporation rate of the liquid to the heat transferred from hot gas to particles: (m/A)Dp2λ/(Lmf(1- εmf)(Tg-Tl)Kg)=hDp/Kg . This equation is applied to data on granulation experiments by different workers to calculate Reynolds number and Nusselt number to obtain a relation between heat and mass transfer from gas to particles during granulation on a logarithmic scale from which the following empirical relation is obtained: Nu = 0.0205Re1.3876 which is comparable to Kothari's correlation Nu = 0.03Re1.3. By using the heat and mass transfer correlation obtained, the entry length, that is the length of granulator up to which effective heat transfer from gas to bed particles takes place, is estimated, which is also validated with experimental study. The correct estimation of entry length is useful in optimal design of a granulator.     

Optimization of Fine Solid Drying in Bubble Fluidized Bed

A commonly used method to dry fine solid particles is drying in a fluidized bed. This paper presents the optimization problem of fluidized drying of fine solids. A drying process proceeding in a three-stage cascade of fluidized cross-current dryers was considered. Solid flows from stage to stage, and fresh gas is introduced to each stage of the cascade. The hydrodynamics of bubble fluidized bed and kinetics of heat and mass transfer are taken into account. The bed hydrodynamics is described by a two-phase model. The drying process considered proceeds in the second period of drying. To optimize this problem a generalized version of a discrete algorithm with constant Hamiltonian was used. The optimization procedure is presented in the paper. In optimization calculations, gas parameters (temperature, humidity and flow rate) minimizing total process cost are sought. The results of calculation are presented as graphs. The results obtained and the conclusions drawn are discussed.     

Approximate statistical theory of a fluidized bed

Under the conditions of developed fluidization there are intensive fluctuations both in the fluidizing medium and in the dispersed solid phase. These motions have a decisive effect on the rheologlcal properties of the fluidized bed, and on the chemical reactions and transport processes taking place in it [1], Thus, for example, in the experiments of Wicke and Fetting [2], who investigated the heat transfer between a fluidized bed and the walls of a heated container, the effective heat transfer coefficient was found to be higher by an order of magnitude than the corresponding result for a fluidized bed held down by a wire grid so that the random motion of the solid phase was reduced. It is clear that the initial stage of any study of the structure of the fluidized bed as a whole, and of the subsequent development of any model, must involve an investigation of local structural properties, including the above fluctuations.The time variation of the individual particle velocities is due to two different causes. First, there is the interaction between the particles both through direct collisions and through the medium of the liquid phase, and, secondly, there is the interaction with the viscous fluid. These two factors are not independent, so that the set of fluidized particles has certain features characteristic for both a dense gas, with a potential intramolecular interaction, and a set of particles executing Brownian motion in a continuous medium.Any detailed statistical theory of a system of fluidized particles must be based on a representation of the random particle motions in the medium by a stochastic process with some definite properties (see, for example, [3–4]). Ideally, this theory should lead to the formulation of a transport equation which, in view of the above properties of the system, should have some of the features of both the usual Boltzman transport equation and the Fokker-Planck equation. The solution of this final equation is, of course, more difficult than the solution of the Boltzman or Fokker-Planck equations. Moreover, there is also the problem of applying this equation to different special cases. An alternative approach is to develop an approximate, but still sufficiently effective, theory of the local properties of the fluidized bed, which would combine relative simplicity in application with sufficient rigor and generality. This kind of theory is put forward in the present paper. The conclusions to which it leads are in good qualitative agreement with experiment.The author wishes to thank G. I. Barenblatt and the participants of his seminar for useful discussions.     

Melting heat transfer along a horizontal heated tube immersed in a fluidized liquid ice bed

An experimental study was performed to determine the melting heat transfer characteristics along a horizontal heated circular tube immersed in a solid-air-liquid three-phase fluidized liquid ice bed. A mixture of fine ice particles and ethylene glycol acqueous solution was adopted as the liquid ice for the test. Measurements were carried out for a range of parameters such as airflow rate, heated tube diameter, and initial concentration of acqueous binary solution. It was found that the heat transfer coefficient for the fluidized liquid ice bed might be more than 20 times as large as that for the fixed liquid ice bed.     

Heat Transfer and Pressure loss of a very shallow fluidized-bed heat exchanger Part 1. Experiment with a single row of tubes

A novel gas fluidized-bed heat exchanger with a very small static bed height has been developed for a heat-exchanging system using a low-pressure fan. This fluidized bed is composed of a multislit distributor, a single row of 8 mm diameter tubes, and glass beads 48–195 μm in diameter. The measured performance of heat transfer is excellent and that of fluidization is satisfactory, in spite of the static bed height being as small as 13 mm. In the best case, the test fluidized bed exhibited a heat transfer performance comparable to that of a conventional fluidized bed with a perforated plate distributor and a static bed height of 150 mm, and showed one-fourteenth the pressure loss.     

鼓泡流化床中流动特性的多尺度数值模拟

鼓泡流化床因其较高的传热特性以及较好的相间接触已经被广泛应用于工业生产中,而对鼓泡流态化气固流动特性的充分认知是鼓泡流化床设计的关键.在鼓泡流化床中,气泡相和乳化相的同时存在使得床中呈现非均匀流动结构,而这种非均匀结构给鼓泡流化床的数值模拟造成了很大的误差.基于此,以气泡作为介尺度结构,建立了多尺度曳力消耗能量最小的稳定性条件,构建了适用于鼓泡流化床的多尺度气固相间曳力模型.结合双流体模型,对A类和B类颗粒的鼓泡流化床中气固流动特性进行了模拟研究,分析了气泡速度、气泡直径等参数的变化规律.研究表明,与传统的曳力模型相比,考虑气泡影响的多尺度气固相间曳力模型给出的曳力系数与颗粒浓度的关系是一条分布带,建立了控制体内曳力系数与局部结构参数之间的关系.通过模拟得到的颗粒浓度和速度与实验的比较可以发现,考虑气泡影响的多尺度曳力模型可以更好地再现实验结果.通过A类和B类颗粒的鼓泡床模拟研究发现,A类颗粒的鼓泡床模拟受多尺度曳力模型的影响更为显著.      

Bed-to-surface heat transfer in a circulating fluidized bed

 The heat transfer characteristics between a circulating fluidized bed and a surface immersed inside it are investigated. This paper presents a statistical model describing the mechanism of heat transfer and the relationship between the heat transfer coefficient and the main parameters of the bed. The proposed model yields a satisfactory representation of heat transfer process in the circulating fluidized bed (CFB), it is consistent with experimental results and other researchers results. Received on 13 December 1999 / Published online: 29 November 2001     

A three phase model of a batch fluidized bed

A three phase mathematical model of simultaneous heat and mass transfer of a batch operation for a fluidized bed is presented. The three phases are a solid free bubble, emulsion and solid phases. The model employs an elaborate five equations porosity model. Various correlations for the minimum fluidization parameters are surveyed and compared with the adequate one is being adopted in the model. The governing equations together with the boundary and initial conditions are presented for a cyclic operation of the bed. These are numerically solved for a test case where the bed is charged with silica gel particles to dehumidify a process air stream. Thus the bed works in an air dehumidification mode/bed regeneration mode cyclic operation with matching conditions.Results for the bed operation are presented as the temperature and humidity ratio variations for the test case. The results indicate the ability of the developed model to provide the␣required data for the concerned batch operated fluidized bed. Received on 11 May 1998     

Effects of magnetic fields on improving mass transfer in flue gas desulfurization using a fluidized bed

The effects of magnetic fields on improving the mass transfer in flue gas desulfurization using a fluidized bed are investigated in the paper. In this research, the magnetically fluidized bed (MFB) is used as the reactor in which ferromagnetic particles are fluidized with simulated flue gas under the influence of an external magnetic field. Lime slurry is continuously sprayed into the reactor. As a consequence, the desulfurization reaction and the slurry drying process take place simultaneously in the MFB. In this paper, the effects of ferromagnetic particles and external magnetic fields on the desulphurization efficiency are studied and compared with that of quartz particles as the fluidized particles. Experimental results show that the ferromagnetic particles not only act as a platform for lime slurry to precipitate on like quartz particles, but also take part in the desulfurization reaction. The results also show that the specific surface area of ferromagnetic particles after reaction is enlarged as the magnetic intensity increases, and the external magnetic field promotes the oxidation of S(IV), improving the mass transfer between sulphur and its sorbent. Hence, the efficiency of desulphurization under the effects of external magnetic fields is higher than that in general fluidized beds.     

Heat transfer and hydrodynamic studies on two- and three-phase fluidized beds of floating bubble breakers

Heat transfer characteristics in three-phase fluidized beds of floating bubble breakers have been studied in a 0.142 m I.D. x 2.0 m high Plexiglas column fitted with an axially mounted cylindrical heater.Effects of the liquid and gas velocities, the particle size, the volume ratio of floating bubble breaker to particles on phase holdup, the vertical bubble length, and the heat transfer coefficient have been determined.In the bubble-coalescing regime, the heat transfer coefficient in three-phase fluidized beds having the volume ratio V_f/V_s of 10–15% produced a maximum increase in heat transfer coefficient of about 20% in comparison to that in the bed without floating bubble breakers. Also, bubble length and gas-phase holdups exhibited their maximum and minimum values at a volume ratio of 10–15%. The heat transfer coefficient in three-phase fluidized beds of floating bubble breakers can be estimated from the surface renewal model with isotropic turbulence theory.Heat transfer coefficients expressed in terms of the Nusselt number have been correlated with the particle Reynolds number and the volume ratio of floating bubble breakers to particles.     

Experimental coating and heat transfer studies in a vibrating fluidized bed

This work presents an experimental study of the heat transfer in a vibrofluidized bed and an investigation of the vibrofluidized bed coating process of thin copper plates.At superficial velocities close to that of minimum fluidization the heat transfer coefficient increases with the air flow rate and also with the immersion depth in the bed. It is independent of the initial object temperature.For different experimental conditions the obtained vibrofluidized bed coating thicknesses increase with the initial object temperature and immersion time. When compared with the theoretical predictions calculated for a regular fluidized bed, they show a good agreement. The temperature-time histories of the coated object are also recorded and compared to theoretical results.     

The propagation of nonlinear waves in a bidisperse fluidized bed

A study is made of the propagation of nonlinear kinematic waves of concentrations of solid particles in a fluidized bed of particles of two different sizes. A hyperbolic system of quasilinear equations is obtained which describes the propagation of the waves. A dependence of the characteristic velocities on the concentrations of the phases and the ratio of the sizes of the particles is found. The influence of an admixture of fine particles on the propagation of porosity waves in the fluidized bed is analyzed. The nature of the formation of jumps in the porosity depending on the concentration of the admixture is studied, as is the process of the transfer of the admixture of fine particles in the bed. The nature of the propagation of nonlinear waves in a fluidized bed of identical particles is clarified. A characteristic velocity is found and conditions are determined for the formation of discontinuities of concentration of the dispserse phase in rarefaction compression waves.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 49–58, January–February, 1985.     

The characteristics of gas–solid flow and wall heat transfer in a fluidized bed reactor

Numerical study using computational fluid dynamics has been carried out to investigate the heat transfer characteristics of a laboratory fluidized bed reactor. The fluidized bed reactor of vTI (Johann Heinrich von Thünen-Institute)-Institute of Wood Technology and Wood Biology is modeled. For the simulation of multiphase flow and thermal fields, an Eulerian–Eulerian approach is applied. The flow and thermal characteristics of the reactor are fully investigated for the wide range of superficial gas velocities and two different particle diameters. In particular, the contributions of the gas bubble and emulsion phase flows on the wall heat transfer are scrutinized. From the predicted results, it is fully elucidated that particular near-wall bubble motions mainly govern the wall heat transfer.     

Important relationship between meso-scale structure and transfer coefficients in fluidized beds

Along with the fast development of computer technology and measurement techniques, fundamental research on fluidization is faced with both new challenges and opportunities. Among others, great attention should be focused on the meso-scale structure of fluidized beds, to study the quantitative prediction theory and optimum control method for the meso-scale structure of fluidized beds, and to establish the modeling of the relationship between meso-scale structure and momentum transfer, heat transfer, mass transfer, and chemical reaction. These efforts, combined with advanced computer simulation, are expected to solve difficult problems in optimum control and scale-up of fluidized bed processes and equipment.     

Experiments on the local heat transfer characteristics of a circulating fluidized bed

The role of particle diameter in the heat transfer of a gas–solid suspension to the walls of a circulating fluidized bed was studied for particles of uniform size. This work reports and analyzes new experimental results for the local bed to wall heat transfer coefficient, not including the radiation component, in a long active heat transfer surface length laboratory bed, which extend previous findings and clear up some divergences. The research included determining the effects of extension and location of the heat transfer surface, circulating solids mass flux and average suspension density. An experimental set-up was built, with a 72.5 mm internal diameter riser, 6.0 m high, composed of six double pipe heat exchangers, 0.93 m high, located one above the other. Five narrow sized diameter quartz sand particles − 179, 230, 385, 460 and 545 μm − were tested. Temperature was kept approximately constant at 423 K and the superficial gas velocity at 10.5 m/s. The major influence of suspension density on the wall heat transfer was confirmed, and contrary to other authors, a significant effect of particle size was found, which becomes more relevant for smaller particles and increasing suspension density. It was observed that the extension of the heat transfer surface area did not influence the heat transfer coefficient for lengths greater than 0.93 m.The heat transfer surface location did not show any effect, except for the exchanger at the botton of the riser. A simple correlation was proposed to calculate the heat transfer coefficient as a function of particle diameter and suspension density.     

Experimental and numerical investigations on the performance of dehumidifying desiccant beds composed of silica-gel and thermal energy storage particles

Enhanced efficiency of the adsorption process in the dehumidifier is a key element for improved performance of desiccant cooling systems. Due to the exothermic nature of the adsorption process, the dehumidification and cooling capacity are limited by significant temperature changes in the adsorption column. In the present study, the effects of integration of sensible and latent heat storage particles in the desiccant bed for in situ management of released adsorption heat are investigated. For this purpose, column experiments are performed using an initially dry granular bed made of silica-gel particles or a homogeneous mixture of silica gel and inert sensible or latent heat storage particles. The packed bed is subject to a sudden uniform air flow at selected values of temperature and humidity. Also, a packed bed numerical model is developed that includes the coupled non-equilibrium heat and moisture transfer in the solid and gas phases. Investigations of the heat and mass transfer characteristics are reported using the composite structure and the results are compared with the base case of simple silica gel bed. Improved desiccant cooling system performance can be obtained by appropriate adjustment of desiccant cycle operation and proper choice of the volume ratio of thermal energy storage particles.     

Heat transfer characteristics in a horizontal swirling fluidized bed

An innovative horizontal swirling fluidized bed (HSFB) with a rectangular baffle in the center of an air distributor and three layers of horizontal secondary air nozzles located at each corner of fluidized bed was developed. Experiments on heat transfer characteristics were conducted in a cold HSFB test model. Heat transfer coefficients between immersed tubes and bed materials in the HSBF were measured with the help of a fast response heat transfer probe. The influences of fluidization velocity, particle size of bed materials, measurement height, probe orientation, and secondary air injection, etc. on heat transfer coefficients were intensively investigated. Test results indicated that heat transfer coefficients increase with fluidization velocity, and reach their maximum values at 1.5-3 times of the minimum fluidization velocity. Heat transfer coefficients are variated along the circumference of the probe, and heat transfer coefficients on the leeward side of the probe are larger than that on the windward side of the probe. Heat transfer coefficients decrease with increasing of measurement height; heat transfer coefficients of the longitudinal probe are larger than that of the transverse probe. The proper secondary air injection and particle size of bed materials can generate a preferred hydrodynamics in the dense zone and enhance heat transfer in a HSFB.     

Gas–liquid mass transfer in the gas–liquid–solid mini fluidized beds

The gas–liquid–solid mini fluidized bed (GLSMFB) combines the advantages of fluidized bed and micro-reactor, and meets the requirements for safety and efficiency of green development of process industry. However, there are few studies on its flow performance and no studies on its mass and heat transfer performance. In this paper, the characteristics of gas–liquid mass transfer in a GLSMFB were studied in order to provide basic guidance for the study of GLSMFB reaction performance and application. Using CO₂ absorption by NaOH as the model process, the gas–liquid mass transfer performance of GLSMFB was investigated. The results show that the liquid volumetric mass transfer coefficient and the gas–liquid interfacial area both increase with the increase of the superficial gas velocity within the experimental parameter range under the same given superficial liquid velocity. At the same ratio of superficial gas to liquid velocity, the liquid volumetric mass transfer coefficient increases with the increase of the superficial liquid velocity. Fluidized solid particles strengthen the liquid mass transfer process, and the liquid volumetric mass transfer coefficient is about 13% higher than that of gas–liquid mini bubble column.