Alkyl and aryl substituted corroles. 1. Synthesis and characterization of free base and cobalt containing derivatives. x-ray structure of (Me(4)Ph(5)Cor)Co(py)(2)

The synthesis, spectroscopic properties, and electrochemistry of six different alkyl- and aryl-substituted Co(III) corroles are presented. The investigated compounds contain methyl, ethyl, phenyl, or substituted phenyl groups at the eight beta-positions of the corrole macrocycle and four derivatives also contain a phenyl group at the 10-meso position of the macrocycle. Each cobalt corrole undergoes four reversible oxidations in CH(2)Cl(2) containing 0.1 M tetra-n-butylammonium perchlorate and exists as a dimer in its singly and doubly oxidized forms. The difference in potential between the first two oxidations is associated with the degree of interaction between the two corrole units of the dimer and ranges from an upper value of 0.62 V, in the case of (Me(6)Et(2)Cor)Co, to a lower value of about 0.17 V, in the case of four compounds which have a phenyl group located at the 10-meso position of the macrocycle. These Co(III) corroles strongly coordinate two pyridine molecules or one carbon monoxide molecule in CH(2)Cl(2) media, and ligand binding constants were evaluated using spectroscopic and electrochemical methods. The structure of (Me(4)Ph(5)Cor)Co(py)(2) was also determined by X-ray diffraction. Crystal data: (Me(4)Ph(5)Cor)Co(py)(2).3CH(2)Cl(2).H(2)O, orthorhombic, a = 19.5690(4) A, b = 17.1070(6) A, c = 15.9160(6) A, V = 5328.2(5) A(3), space group Pna2(1), Z = 2, 35 460 observations, R(F) = 0.069.     

Clarification of the oxidation state of cobalt corroles in heterogeneous and homogeneous catalytic reduction of dioxygen

Co(III) corroles were investigated as efficient catalysts for the reduction of dioxygen in the presence of perchloric acid in both heterogeneous and homogeneous systems. The investigated compounds are (5,10,15-tris(pentafluorophenyl)corrole)cobalt (TPFCor)Co, (10-pentafluorophenyl-5,15-dimesitylcorrole)cobalt (F 5PhMes 2Cor)Co, and (5,10,15-trismesitylcorrole)cobalt (Mes 3Cor)Co, all of which contain bulky substituents at the three meso positions of the corrole macrocycle. Cyclic voltammetry and rotating ring-disk electrode voltammetry were used to examine the catalytic activity of the compounds when adsorbed on the surface of a graphite electrode in the presence of 1.0 M perchloric acid, and this data is compared to results for the homogeneous catalytic reduction of O 2 in benzonitrile containing 10 (-2) M HClO 4. The corroles were also investigated as to their redox properties in nonaqueous media. A reversible one-electron oxidation occurs at E 1/2 values between 0.42 and 0.89 V versus SCE depending upon the solvent and number of fluorine substituents on the compounds, and this is followed by a second reversible one-electron abstraction at E 1/2 = 0.86 to 1.18 V in CH 2Cl 2, THF, or PhCN. Two reductions of each corrole are also observed in the three solvents. A linear relationship is observed between E 1/2 for oxidation or reduction and the number of electron-withdrawing fluorine groups on the compounds, and the magnitude of the substituent effect is compared to what is observed in the case of tetraphenylporphyrins containing meso -substituted C 6F 5 substituents. The electrochemically generated forms of the corrole can exist with Co(I), Co(II), or Co(IV) central metal ions, and the site of the electron-transfer in each oxidation or reduction of the initial Co(III) complex was examined by UV-vis spectroelectrochemistry. ESR characterization was also used to characterize singly oxidized (F 5PhMes 2Cor)Co, which is unambiguously assigned as a Co(III) radical cation rather than the expected Co(IV) corrole with an unoxidized macrocyclic ring.     

Electrochemistry and spectroelectrochemistry of meso-substituted free-base corroles in nonaqueous media: reactions of (Cor)H3, [(Cor)H4]+, and [(Cor)H2]-

Eleven free-base corroles with different electron-donating or electron-withdrawing meso substituents were characterized as to their electrochemistry and UV-visible spectroscopy in benzonitrile (PhCN) or pyridine containing tetra-n-butylammonium perchlorate (0.1 M). Six forms of the compounds with different numbers of protons and/or oxidation states were spectroscopically identified and are represented as (Cor)H3, (.Cor)H2, [(Cor)H2]-, [(.Cor)H2]2-, [(Cor)H4]+, and [(.Cor)H4]2+, where Cor is a trianionic corrole macrocycle. The electrochemistry and UV-visible properties are a function of corrole basicity, solvent basicity, and types or sizes of the meso substituents, and the compounds could be subdivided into one of two different groups, one of which comprises sterically hindered corroles and another that does not. The electroactive species in PhCN is (Cor)H3, whereas in pyridine, one inner proton dissociates, generating a mixture of (Cor)H3, [(Cor)H2]-, and pyH+. The addition of one electron to [(Cor)H2]- reversibly gives the [(.Cor)H2]2- pi-anion radical, whereas a reversible oxidation of the same species gives the neutral radical (.Cor)H2. The first one-electron reduction of (Cor)H3 occurs at the macrocycle in PhCN, but the initial product rapidly converts to [(Cor)H2]-, which undergoes additional reversible redox reactions at the conjugated pi-ring system. The first oxidation of (Cor)H3 in PhCN leads to a mixture of (.Cor)H2 and [(Cor)H4]+, both of which could be further oxidized or reduced. The UV-visible spectra of [(Cor)H4]+ were measured in PhCN after titrations with trifluoroacetic acid, after which selected samples were examined as to their electrochemistry. The HOMO-LUMO gaps of [(Cor)H2]-, (Cor)H3, and [(Cor)H4]+ were also determined.     

Protonated free-base corroles: acidity, electrochemistry, and spectroelectrochemistry of [(Cor)H4]+, [(Cor)H5]2+, and [(Cor)H6]3+

Protonated meso-substituted free-base macrocycles of the form [(Cor)H4]+, [(Cor)H5]2+, and [(Cor)H6]3+ where Cor is the trianion of a given corrole, were chemically generated from neutral (Cor)H3 in benzonitrile by addition of trifluoroacetic acid (TFA) and characterized as to their relative acidity, electrochemistry, and spectroelectrochemistry. Three types of protonated free-base corroles with different electron-donating or electron-withdrawing substituents at the meso positions of the macrocycle were investigated. One is protonated exclusively at the central nitrogens of the corrole forming [(Cor)H4]+ from (Cor)H3, while the second and third types of corroles undergo protonation at one or two meso pyridyl substituents prior to protonation of the central nitrogens and give as the final products [(Cor)H5]2+ and [(Cor)H6]3+, respectively. Altogether the relative deprotonation constants (pKa) for 10 different corroles were determined in benzonitrile and analyzed with respect to the molecular structure and/or type of substituents on the three meso positions of the macrocycle. Mechanisms for oxidation and reduction of the protonated corroles are proposed in light of the electrochemical and spectroelectrochemical data.     

Tuning redox potentials of bis(imino)pyridine cobalt complexes: an experimental and theoretical study involving solvent and ligand effects

The structure and electrochemical properties of a series of bis(imino)pyridine Co(II) complexes (NNN)CoX(2) and [(NNN)(2)Co][PF(6)](2) (NNN = 2,6-bis[1-(4-R-phenylimino)ethyl]pyridine, with R = CN, CF(3), H, CH(3), OCH(3), N(CH(3))(2); NNN = 2,6-bis[1-(2,6-(iPr)(2)-phenylimino)ethyl]pyridine and X = Cl, Br) were studied using a combination of electrochemical and theoretical methods. Cyclic voltammetry measurements and DFT/B3LYP calculations suggest that in solution (NNN)CoCl(2) complexes exist in equilibrium with disproportionation products [(NNN)(2)Co](2+) [CoCl(4)](2-) with the position of the equilibrium heavily influenced by both the solvent polarity and the steric and electronic properties of the bis(imino)pyridine ligands. In strong polar solvents (e.g., CH(3)CN or H(2)O) or with electron donating substituents (R = OCH(3) or N(CH(3))(2)) the equilibrium is shifted and only oxidation of the charged products [(NNN)(2)Co](2+) and [CoCl(4)](2-) is observed. Conversely, in nonpolar organic solvents such as CH(2)Cl(2) or with electron withdrawing substituents (R = CN or CF(3)), disproportionation is suppressed and oxidation of the (NNN)CoCl(2) complexes leads to 18e(-) Co(III) complexes stabilized by coordination of a solvent moiety. In addition, the [(NNN)(2)Co][PF(6)](2) complexes exhibit reversible Co(II/III) oxidation potentials that are strongly dependent on the electron withdrawing/donating nature of the N-aryl substituents, spanning nearly 750 mV in acetonitrile. The resulting insight on the regulation of redox properties of a series of bis(imino)pyridine cobalt(II) complexes should be particularly valuable to tune suitable conditions for reactivity.     

Reductive demetalation of manganese corroles： The substituent effect

The reductive demetalation of manganese corroles was investigated in CH2Cl2/HCl （aqueous） solvent by using SnCl2 as reducing agent. It was found that the demetalation yields depend on the substituents of corrole macrocycle significantly. Electron- rich manganese corrole undergoes reductive demetalation more easily than electron-deficient ones. The isolated reductive demetalation yield of manganese 5,10,15-tris（phenyl）corrole in present system is moderate （46%）. As for electron-deficient Mn（Ⅲ） 5,10,15-tris（pentafluorophenyl）corrole, the acid-induced demetalation in HOAc-HESO4 （V/V = 3：1） is preferable with an isolated yield of 67%.     

Alkyl and aryl substituted corroles. 3. Reactions of cofacial cobalt biscorroles and porphyrin-corroles with pyridine and carbon monoxide

The synthesis and characterization of three new cofacial biscorroles and three new linked Co(II) porphyrins and Co(III) corroles with the same face to face orientation are described. The biscorroles are represented as (BCS)Co(2), (BCO)Co(2), (BCX)Co(2) while the porphyrin-corrole dyads are represented as (PCA)Co(2), (PCB)Co(2), (PCO)Co(2) where BC represents the Co(III) cofacial biscorroles and PC represents the porphyrin-corrole complexes which are linked to each other by a dibenzothiophene (S), dibenzofuran (O), or 9,9-dimethylxanthene (X) bridge in the case of the corroles and an anthracene (A), biphenylene (B), or dibenzofuran (O) bridge in the case of the mixed macrocycle derivatives. The electrochemical and spectroscopic data on these new bismacrocycles are compared to those of previously reported biscorroles of the type (BCA)Co(2) and (BCB)Co(2). The CO and/or pyridine binding properties of each biscorrole and porphyrin-corrole in CH(2)Cl(2) are also presented. Only one CO ligand is bound axially to each corrole unit of the bismacrocycle but five- and six-coordinate pyridine complexes can be generated for the same compounds, with the exact stoichiometry depending upon the concentration of pyridine in solution. In all cases, the six-coordinate bispyridine corrole complex can be unambiguously identified by a strong diagnostic marker band located at 598-601 nm. The formation constants for pyridine binding to the biscorroles range from log K(1) = 3.14 to 5.08 while log K(2) ranges from 1.10 to 2.61 depending upon the specific spacer. Carbon monoxide binding constants range from log K = 3.6 to 4.0 in the case of the biscorroles and from log K = 3.4 to 4.1 in the case of the porphyrin-corrole dyads. These values also depend on the specific spacer in the complex and, like the pyridine binding constants, decrease in the order BCO > BCA > BCB for the biscorroles and PCO > PCA > PCB for the porphyrin-corrole complexes.     

Alkyl and aryl substituted corroles. 2. Synthesis and characterization of linked "face-to-face" biscorroles. X-ray structure of (BCA)Co(2)(py)(3), where BCA represents a biscorrole with an anthracenyl bridge

The synthesis, spectroscopic properties, and electrochemistry of (BCA)Co(2) and (BCB)Co(2) are described where BCA and BCB represent biscorroles linked by an anthracenyl (A) or a biphenylenyl (B) bridge. The pyridine and CO binding properties of (BCA)Co(2) and (BCB)Co(2) are also presented, and one of the compounds in its pyridine-ligated form, (BCA)Co(2)(py)(3), is structurally characterized. The data on the biscorroles are compared on one hand to the monocorrole having the same substitution pattern and on the other hand to bisporphyrins having two Co(II) ions and the same anthracenyl or biphenylenyl linkers in order to better understand the interaction which occurs between the two corrole macrocycles. A parallel study on five different Co(III) phenyl-substituted corroles showed that bis-pyridine and mono-CO adducts are readily formed from the complexes in CH(2)Cl(2). This present paper examines how the ligand binding properties and electrochemistry of these Co(III) corroles are modified by the anthracenyl or biphenylenyl bridge which links the two macrocycles in a face to face orientation. An X-ray crystal structure was obtained for the tris-pyridine adduct of the anthracenyl bridged derivative, (BCA)Co(2)(py)(3), and gives the following results: C(127)H(99)Co(2)N(11).2CHCl(3), M = 2135.90, triclinic, space group P&onemacr;, a = 13.2555(5) A, b = 18.6406(8) A, c = 22.2140(9) A, alpha = 94.186(9) degrees, beta = 102.273(9) degrees, gamma = 94.205(9) degrees, V = 5326.8(4) A(3), 9293 independent reflections collected, R(F) = 0.066.     

Electron-transfer oxidation of coenzyme B12 model compounds and facile cleavage of the cobalt(IV)-carbon bond via charge-transfer complexes with bases. A negative temperature dependence of the rates

The electron-transfer oxidation and subsequent cobalt-carbon bond cleavage of vitamin B12 model complexes were investigated using cobaloximes, (DH)2Co(III)(R)(L), where DH- = the anion of dimethylglyoxime, R = Me, Et, Ph, PhCH2, and PhCH(CH3), and L = a substituted pyridine, as coenzyme B12 model complexes and [Fe(bpy)3](PF6)3 or [Ru(bpy)3](PF6)3 (bpy = 2,2'-bipyridine) as a one-electron oxidant. The rapid one-electron oxidation of (DH)2Co(III)(Me)(py) (py = pyridine) with the oxidant gives the corresponding Co(IV) complexes, [(DH)2Co(IV)(Me)(py)]+, which were well identified by the ESR spectra. The reorganization energy (lambda) for the electron-transfer oxidation of (DH)2Co(Me)(py) was determined from the ESR line broadening of [(DH)2Co(Me)(py)]+ caused by the electron exchange with (DH)2Co(Me)(py). The lambda value is applied to evaluate the rate constants of photoinduced electron transfer from (DH)2Co(Me)(py) to photosensitizers in light of the Marcus theory of electron transfer. The Co(IV)-C bond cleavage of [(DH)2Co(Me)(py)]+ is accelerated significantly by the reaction with a base. The overall activation energy for the second-order rate constants of Co(IV)-C bond cleavage of [(DH)2Co(IV)(Me)(py)]+ in the presence of a base is decreased by charge-transfer complex formation with a base, which leads to a negative activation energy for the Co(IV)-C cleavage when either 2-methoxypyridine or 2,6-dimethoxypyridine is used as the base.     

Solvent, anion, and structural effects on the redox potentials and UV-visible spectral properties of mononuclear manganese corroles

A series of manganese(III) corroles were investigated as to their electrochemistry and spectroelectrochemistry in nonaqueous solvents. Up to three oxidations and one reduction were obtained for each complex depending on the solvents. The main compound discussed in this paper is the meso-substituted manganese corrole, (Mes 2PhCor)Mn, and the main points are how changes in axially coordinated anion and solvent will affect the redox potentials and UV-vis spectra of each electrogenerated species in oxidation states of Mn(III), Mn(IV), or Mn(II). The anions OAc (-), Cl (-), CN (-), and SCN (-) were found to form five-coordinate complexes with the neutral Mn(III) corrole while two OH (-) or F (-) anions were shown to bind axially in a stepwise addition to give the five- and six-coordinate complexes in nonaqueous media. In each case, complexation with one or two anionic axial ligands led to an easier oxidation and a harder reduction as compared to the uncomplexed four-coordinate species.     

Electrochemical and Spectral Characterization of Iron Corroles in High and Low Oxidation States: First Structural Characterization of an Iron(IV) Tetrapyrrole pi Cation Radical

The electrochemistry and spectroscopic properties of three iron corroles were examined in benzonitrile, dichloromethane, and pyridine containing 0.1 M tetra-n-butylammonium perchlorate or tetra-n-ethylammonium hexafluorophosphate as supporting electrolyte. The investigated compounds are represented as (OEC)Fe(IV)(C(6)H(5)), (OEC)Fe(IV)Cl, and (OEC)Fe(III)(py), where OEC is the trianion of 2,3,7,8,12,13,17,18-octaethylcorrole. Each iron(IV) corrole undergoes two one-electron reductions and two or three one-electron oxidations depending upon the solvent. Under the same solution conditions, the iron(III) corrole undergoes a single one-electron reduction and one or two one-electron oxidations. Each singly oxidized and singly reduced product was characterized by UV-vis and/or EPR spectroscopy. The data indicate a conversion of (OEC)Fe(IV)(C(6)H(5)) and (OEC)Fe(IV)Cl to their iron(III) forms upon a one-electron reduction and to iron(IV) corrole pi cation radicals upon a one-electron oxidation. The metal center in [(OEC)Fe(III)(C(6)H(5))](-) is low spin (S = (1)/(2)) as compared to electrogenerated [(OEC)Fe(III)Cl](-), which contains an intermediate-spin (S = (3)/(2)) iron(III). (OEC)Fe(III)(py) also contains an intermediate-spin-state iron(III) and, unlike previously characterized (OEC)Fe(III)(NO), is converted to an iron(IV) corrole upon oxidation rather than to an iron(III) pi cation radical. Singly oxidized [(OEC)Fe(IV)(C(6)H(5))](*)(+) is the first iron(IV) tetrapyrrole pi cation radical to be isolated and was structurally characterized as a perchlorate salt. It crystallizes in the triclinic space group P&onemacr; with a = 10.783(3) ?, b = 13.826(3) ?, c = 14.151(3) ?, alpha = 78.95(2) degrees, beta = 89.59(2) degrees, and gamma = 72.98(2) degrees at 293 K with Z = 2. Refinement of 8400 reflections and 670 parameters against F(o)(2) yields R1 = 0.0864 and wR2 = 0.2293. The complex contains a five-coordinated iron with average Fe-N bond lengths of 1.871(3) ?. The formulation of the electron distribution in this compound was confirmed by M?ssbauer, X-ray crystallographic, and magnetic susceptibility data as well as by EPR spectroscopy, which gives evidence for strong antiferromagnetic coupling between the iron(IV) center and the singly oxidized corrole macrocycle.     

Electrochemistry and spectroelectrochemistry of heterobimetallic porphyrin-corrole dyads. Influence of the spacer, metal ion, and oxidation state on the pyridine binding ability

Combined electrochemical and UV-visible spectroelectrochemical methods were utilized to elucidate the prevailing mechanisms for electroreduction of previously synthesized porphyrin-corrole dyads of the form (PCY)H2Co and (PCY)MClCoCl where M = Fe(III) or Mn(III), PC = porphyrin-corrole, and Y is a bridging group, either biphenylenyl (B), 9,9-dimethylxanthenyl (X), anthracenyl (A), or dibenzofuranyl (O). These studies were carried out in pyridine, conditions under which the cobalt(IV) corrole in (PCY)MClCoCl is immediately reduced to its Co(III) form, thus enabling direct comparisons with the free-base porphyrin dyad, (PCY)H2Co(III) under the same solution conditions. The compounds are all reduced in multiple one-electron-transfer steps, the first of which involves the M(III)/M(II) process of the porphyrin in the case of (PCY)MClCoCl and the Co(III)/Co(II) process of the corrole in the case of (PCY)H2Co. Each metal-centered redox reaction may be accompanied by the gain or loss of pyridine axial ligands, with the exact stoichiometry of the exchange process depending upon the specific combination of metal ions in the dyad, their oxidation states, and the particular spacer in the complex. Before this study was started, it was expected that the porphyrin-corrole dyads with the largest spacers, namely, O and A, would readily accommodate the formation of cobalt(III) bis-pyridine adducts because of the larger size of the cavity while dyads with the smallest B spacer would seem to have insufficient room to add even a single pyridine within the cavity, as was structurally seen in the case of (PCB)H2Co(py). This is clearly not the case, as shown in the present study. A reversible Co(III)/Co(II) reaction is seen for (PCB)MnClCoCl at -0.62 V, which when combined with spectroscopic data, leads to the assignment of (PCB)Mn(III)(py)2Co(III)(py) as the species in pyridine. The reduction of (PCB)Mn(III)(py)2Co(III)(py) to (PCB)Mn(II)(py)Co(III)(py) is accompanied on the slower spectroelectrochemical time scale by the appearance of a 603 nm band in the UV-vis spectra and is consistent with the addition of a second pyridine ligand to the Co(III)(py) unit of the dyad as one ligand is lost from the electrogenerated manganese(II) porphyrin, thus maintaining one pyridine ligand within the cavity. A different change in the coordination number is observed in the case of (PCB)FeClCoCl. Here the initial Fe(III) complex can be assigned as (PCB)Fe(III)ClCo(III)(py), which has no pyridine molecule within the cavity and the singly reduced form is characterized as (PCB)Fe(II)(py)2Co(III)(py)2, which contains two pyridine ligands inside the cavity. A following one-electron reduction of the Fe(II)/Co(III) complex then gives [(PCB)Fe(II)(py)2Co(II)]-.     

Verdoheme reactivity. Remarkable paramagnetically shifted (1)H NMR spectra of intermediates from the addition of hydroxide or methoxide with Fe(II) and Fe(III) verdohemes

Studies of the reaction of 5-oxaporphyrin iron complexes (verdohemes) with methoxide ion or hydroxide ion have been undertaken to understand the initial step of ring opening of verdohemes. High-spin [ClFe(III)(OEOP)] undergoes a complex series of reactions upon treatment with hydroxide ion in chloroform, and similar species are also detected in dichloromethane, acetonitrile, and dimethyl sulfoxide. Three distinct paramagnetic intermediates have been identified by (1)H NMR spectroscopy. These reactive species are formed by addition of hydroxide to the macrocycle and to the iron as an axial ligand. Treatment of low-spin [(py)(2)Fe(II)(OEOP)]Cl (OEOP is the monoanion of octaethyl-5-oxaporphyrin) with excess methoxide ion in pyridine solution produces [(py)(n)()Fe(II)(OEBOMe)] (n = 1 or 2) ((OEBOMe), dianion of octaethylmethoxybiliverdin), whose (1)H NMR spectrum undergoes marked alteration upon addition of further amounts of methoxide ion. An identical (1)H NMR spectrum, which is characterized by methylene resonances with both upfield and downfield paramagnetic shifts, is formed upon treatment of [Fe(II)(OEBOMe)](2) with methoxide in pyridine solution and results from the formation of [(MeO)Fe(II)(OEBOMe)](-).     

Xanthene-modified and hangman iron corroles

Iron corroles modified with a xanthene scaffold are delivered from easily available starting materials in abbreviated reaction times. These new iron corroles have been spectroscopically examined with particular emphasis on defining the oxidation state of the metal center. Investigation of their electronic structure using (57)Fe Mo?ssbauer spectroscopy in conjunction with density functional theory (DFT) calculations reveals the non-innocence of the corrole ligand. Although these iron corroles contain a formal Fe(IV) center, the deprotonated corrole macrocycle ligand is one electron oxidized. The electronic ground state of these complexes is best described as an intermediate spin S = 3/2 Fe(III) site strongly antiferromagnetically coupled to the S = 1/2 of the monoradical dianion corrole [Fe(III)Cl-corrole(+?)]. We show here that iron corroles as well as xanthene-modified and hangman xanthene iron corroles are redox active and catalyze the disproportionation of hydrogen peroxide via the catalase reaction, and that this activity scales with the oxidation potential. The meso position of corrole macrocycle is susceptible toward nucleophilic attack during catalase turnover. The reactivity of peroxide within the hangman cleft reported here adds to the emerging theme that corroles are good at catalyzing two-electron activation of the oxygen-oxygen bond in a variety of substrates.     

Impact of ligand exchange in hydrogen production from cobaloxime-containing photocatalytic systems

Ligand exchange on the Co(dmgH)(2)(py)Cl water reduction catalyst was explored under photocatalytic conditions. The photosensitizer fluorescein was connected to the catalyst through the axially coordinated pyridine. While this two-component complex produces H(2) from water under visible light irradiation in the presence of triethanolamine (TEOA), it is less active than a system containing separate fluorescein and [Co(III)(dmgH)(2)(py)Cl] components. NMR and photolysis experiments show that the Co catalyst undergoes pyridine exchange. Interestingly, glyoximate ligand exchange was also observed photocatalytically and by NMR spectroscopy, thereby showing that integrated systems in which the photosensitizer is linked directly to the Co(dmgH)(2)(py)Cl catalyst may not remain intact during H(2) photogeneration. These studies have also given rise to insights into the catalyst decomposition mechanism.     

Tetra-2,3-pyrazinoporphyrazines with externally appended pyridine rings. 1. Tetrakis-2,3-[5,6-di(2-pyridyl)pyrazino]porphyrazine: a new macrocycle with remarkable electron-deficient properties

A new pyrazinoporphyrazine macrocycle carrying externally appended pyridine rings, tetrakis-2,3-[5,6-di(2-pyridyl)pyrazino]porphyrazine (hydrated), [Py(8)TPyzPzH(2)].2H(2)O, was prepared in high yield by direct cyclotetramerization of the precursor, 2,3-dicyano-5,6-di(2-pyridyl)-1,4-pyrazine, [(CN)(2)Py(2)Pyz], in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). The single-crystal X-ray structure of [(CN)(2)Py(2)Pyz] shows a noncoplanar positioning of the pyrazine and pyridine rings in the two slightly different independent molecular units present in the crystal. UV-vis spectra of [Py(8)TPyzPzH(2)] were measured in two nondonor solvents (CHCl(3), CH(2)Cl(2)), a slightly basic solvent (pyridine), and an acidic solvent (CH(3)COOH). In all cases, the spectral changes are consistent with the occurrence of molecular aggregation and colloidal dispersions which break up with time to give clear solutions containing exclusively the monomeric form of the macrocycle, either neutral [Py(8)TPyzPzH(2)] (in CHCl(3), CH(2)Cl(2), and CH(3)COOH) or dianionic [Py(8)TPyzPz](2)(-) (in pyridine). A spectrally monitored titration of [Py(8)TPyzPzH(2)] in CH(2)Cl(2) with TBA(OH) shows the loss of two protons from the macrocyclic core and quantitative conversion of [Py(8)TPyzPzH(2)] to [Py(8)TPyzPz](2)(-). Cyclic voltammetry and thin-layer spectroelectrochemical measurements show that [Py(8)TPyzPzH(2)] is present in CH(2)Cl(2) while [Py(8)TPyzPz](2)(-) is present in pyridine, but both forms of the compound exhibit identical electrochemical behavior, consistent with a conversion of the dianion to the neutral porphyrazine in pyridine prior to electroreduction via four reversible one-electron transfer steps. No oxidations of the macrocycle are observed in either solvent containing 0.1 M tetrabuthylammonium perchlorate (TBAP). A comparison of the electrochemical behavior for [Py(8)TPyzPzH(2)] with what is reported for related phthalocyanine and porphyrazine analogues highlights the remarkable electron-accepting properties of the presently investigated free-base macrocycle.     

Synthesis,structures, and properties of a series of four-, five-, and six-coordinate cobalt(III) triazacorrole complexes: the first examples of transition metal corrolazines

The syntheses of the first transition metal corrolazine complexes, in which the meso carbon atoms of a corrole framework have been replaced by N atoms, are reported. Metalation of the corrolazine [(TBP)(8)CzH(3)] (TBP = 4-tert-butylphenyl) (1) with Co(acac)(2) gives [(TBP)(8)CzCo(III)] (2) in good yield. Addition of PPh(3) to 2 in pyridine results in the formation of [(TBP)(8)CzCo(III)(PPh(3))] (3), which was characterized by X-ray crystallography. Likewise, addition of an excess of pyridine to 2 in CH(2)Cl(2) followed by slow diffusion of MeOH gives [(TBP)(8)CzCo(III)(py)(2)] (4) as a crystalline solid, which was also characterized by X-ray crystallography. The crystal structures of 3 and 4 reveal that the corrolazine cavity is significantly smaller ( approximately 0.1 A) than their regular corrole analogues. Characterization of 2-4 by UV-vis spectroscopy reveals some interesting features in the absorption spectra of these compounds, including a dramatic red-shift of the Soret band. In addition, binding of pyridine to 2 was evaluated quantitatively by UV-vis titration, revealing a formation constant of beta(2) = 9.0 x 10(7) M(-)(2), which is larger than any of the regular Co(III) corrole analogues.     

Chemistry of cobalt acetate. 7. Electrochemical oxidation of mu3-oxo-centered cobalt(III) acetate trimers

Electrochemical and spectroelectrochemical properties of five cobalt(III) acetate complexes [CoIII3(mu3-O)(CH3CO2)5(OR)(py)3][PF6] are described, where py=pyridine and R=OCCH3 (A), H (B), CH3 (C), CH2CH=CH2 (D), and CH2C6H5 (E). Each is reduced irreversibly as observed by cyclic voltammetry at room temperature and at -40 degrees C in acetonitrile at scan rates up to 20 V s(-1), but oxidized reversibly to a mixed-valence Co(III)2Co(IV) species at approximately 1.23 V vs the ferrocenium/ferrocene couple. Controlled potential coulometry confirmed a one-electron-oxidation process. Spectroelectrochemical oxidation of A at 5 degrees C showed isosbestic points in the electronic absorption spectrum that showed the oxidized complex to be stable in solution for at least 1 h.     

新型氯代苯基咔咯的合成及电化学和光谱性质

通过吡咯和具有相应取代基的苯甲醛在甲醇和水的混合溶剂中生成胆色烷, 然后用四氯苯醌氧化胆色烷, 合成了2种新型的咔咯化合物: 三(4-氯苯基)咔咯[(ClPh)₃CorH₃]和三(2,4-二氯苯基)咔咯[(Cl₂Ph)₃CorH₃]. 采用紫外-可见、荧光、¹H NMR、MS和IR等光谱技术对化合物进行了表征. 研究了化合物在二氯甲烷和二甲基甲酰胺中的电化学及光谱电化学性质. 讨论了溶剂和取代基对紫外-可见光谱以及氧化还原电位和电子转移过程的影响. 提出了化合物在2种不同溶剂中的氧化还原反应机理.