基于聚合物核壳纳米粒子的Hg~(2+)比率型荧光检测传感器

采用一步聚合的方法,制备了以疏水的聚甲基丙烯酸甲酯(PMMA)为核、亲水性的聚电解质支化聚乙烯亚胺(PEI)为壳的纳米粒子分散液.将供体荧光团4-胺基-7-硝基-N-辛基苯并[1,2,5]噁二唑(NBD)以包埋的方式在聚合过程中直接引入PMMA核内部,而受体荧光团罗丹明衍生物SRHB通过吸附作用进入PEI-PMMA核壳界面,构成了含有两种不同荧光分子且可对Hg2+进行荧光比率检测的传感器.考察了含荧光分子的聚合物粒子光谱学性质,证明两种荧光分子均被引入了聚合物粒子体系.在汞离子的荧光检测试验中,加入Hg2+后,体系中的NBD荧光强度下降,而罗丹明的特征发射峰在579 nm处出现,并随着Hg2+浓度的增加,受体/供体的荧光强度比值呈现增长趋势.研究还发现,聚合物粒子基荧光探针对于Hg2+具有较好的选择性,且最佳使用范围是体系pH值在5～8之间,其检测Hg2+的最低浓度可达到1μmol/L.     

Preparation of Fluorescence Tunable Polymer Nanoparticles by One-step Mini-emulsion

Fluorescence tunable polymer nanoparticles were prepared by incorporating two hydrophobic fluorescent dyes (9, 10-diphenylanthracene: DPA and nitrobenzoxadiazolyl: NBD) into polymethylmethacrylate (PMMA) nanoparticles via one-step mini-emulsion polymerization method. The prepared fluorescent nanoparticles exhibit the spectral properties of both DPA and NBD dye, indicating that the two fluorophores have been incorporated into the nanoparticles. The nanoparticles greatly enhance the fluorescence emission of the two hydrophobic dyes in aqueous media probably by providing good protection of the dye molecules in the polymer nanoparticles matrix. Moreover, by varying the doping ratio of the two hydrophobic dyes, the polymer nanoparticles exhibit tunable and distinguishable emission characteristics under a single wavelength excitation via occuring fluorescence resonance energy transfer (FRET).     

Fabrication of Novel Polymer Nanoparticle-Based Fluorescence Resonance Energy Transfer Systems and their Tunable Fluorescence Properties

In this study, two hydrophobic fluorescent dyes, nitrobenzoxadiazolyl (NBD) and 9-(diethylamino)benzo[a]phenoxazin-5-one (NR) with different doping ratios were incorporated into polymer nanoparticles to constitute novel polymer nanoparticle-based fluorescence resonance energy transfer (FRET) systems via a facile one-step mini-emulsion polymerization. Spectroscopic characteristics demonstrate that the two fluorophores have been successfully embedded into the nanoparticles, and the fluorescence emission intensity of the two hydrophobic dyes can be greatly enhanced in aqueous media. The as-prepared fluorescent nanoparticles also display a uniform small size (ca. 55 nm), high dye load, intense fluorescence, as well as controllable amount and ratio of the two dyes. The observed FRET efficiencies (16.0–75.2%), as well as the distance (r) between NBD (donor) and NR (acceptor), is closely correlated to the doping ratio of two dyes. Moreover, by varying the doping ratio of two dyes, the fluorescent nanoparticles would exhibit multicolor through FRET upon a single wavelength excitation, and the fluorescence emission signals of the dye-doped nanoparticles could be accurately tuned. These results indicate that the as-prepared uniform FRET-mediated nanoparticles are of high interest in multiplexed bioanalysis.     

Preparation and Characterization of Uniform Near IR Polystyrene Nanoparticles

Biomaterials for in vivo fluorescence imaging are required to be biocompatible, nontoxic, photostable and highly fluorescent. Fluorescence must be in the near infrared (NIR) region of the electromagnetic spectrum to avoid absorption and autofluorescence of endogenous tissues. NIR fluorescent polystyrene nanoparticles may be considered ideal biomaterials for in vivo imaging applications. These NIR nanoparticles were prepared by a swelling process of polystyrene template nanoparticles with a hydrophobic NIR dye dissolved in a water‐miscible swelling solvent, a method developed for preparation of nonbiodegradable nanoparticles, for NIR fluorescent bioimaging applications. This method overcomes common problems that occur with dye entrapment during nanoparticle formation such as loss of fluorescence and size polydispersity. Fluorescence intensity of the nanoparticles was found to be size dependent, and was optimized for differently sized nanoparticles. The resulting NIR nanoparticles were also found to be more fluorescent and highly photostable compared to the free dye in solution, showing their potential as biomaterials for in vivo fluorescence imaging.     

聚甲基丙烯酰胺包覆的ZnO发光量子点及其在细胞成像中的应用

通过溶胶-凝胶法合成了在水溶液中稳定发光、荧光颜色可调的ZnO@polymer核壳型纳米粒子, 并研究了这种量子点对人类宫颈癌HeLa细胞的毒性以及细胞吞噬后激光共聚焦成像的效果. 这种荧光探针的外壳是一种通过配位键与ZnO内核结合的共聚物, 该共聚物外层是亲水的聚甲基丙烯酰胺, 内层是疏水的聚甲基丙烯酸酯. 细胞毒性实验证明, 该材料有良好的生物兼容性, 适用于生物荧光标记. 共聚焦荧光成像结果显示, 这些纳米粒子可以穿透HeLa细胞膜并在细胞质中稳定发光.     

Size control of self-assembled nanoparticles by an emulsion/solvent evaporation method

A novel and simple method for size control of self-assembled nanoparticles is suggested in this paper. Polymeric nanoparticles were prepared from amphiphilic chitosan derivatives fluorescein isothiocyanate (FITC)-conjugated glycol chitosans (FGCs). The attachment of hydrophobic FITC onto hydrophilic glycol chitosan induced the amphiphilic conjugate to form self-assembled nanoparticles in aqueous media, depending on degree of substitution. The size of self-assembled nanoparticles was controlled by a novel emulsion/solvent evaporation method. Adding a small amount of an immiscible solvent with water (chloroform) to FGC nanoparticle suspensions in aqueous media followed by ultrasonification and solvent evaporation led to partial dissociation and subsequent reformation of nanoparticles. The evaporation of chloroform facilitated the hydrophobic association, which resulted in more dense and hardened hydrophobic cores. The size of nanoparticles was closely related with the FGC concentration in the emulsion. The mean diameters of self-assembled nanoparticles were 150–500 nm at the FGC concentrations of 0.3–2.5 mg/ml. Higher FGC concentration resulted in larger particles. The polydispersity factors (μ ₂/Γ ²) of the reformed nanoparticles were fairly low (0.001–0.094), indicating narrow size distribution. The FGC nanoparticles were stable in phosphate-buffered saline at 37°C up to 20 days. Lactose was a good excipient for maintaining the structural integrity of nanoparticles during freeze-drying. Without lactose, the freeze-dried nanoparticles were not homogeneously redispersed in aqueous media. However, the freeze-dried nanoparticles with lactose were spontaneously redispersed in aqueous milieu with their own sizes.     

Facile synthesis of highly biocompatible poly(2-(methacryloyloxy)ethyl phosphorylcholine)-coated gold nanoparticles in aqueous solution

Diblock copolymers comprising a highly biocompatible poly(2-(methacryloyloxy)ethyl phosphorylcholine) (PMPC) block and a poly(2-(dimethylamino)ethyl methacrylate) (PDMA) block were evaluated for the synthesis of sterically stabilized gold nanoparticles in aqueous solution. The PDMA block becomes partially protonated on addition of HAuCl4, and the remaining nonprotonated tertiary amine groups reduce the AuCl4- counterion to zerovalent gold in situ. This approach results in the adsorption of the PDMA block onto the gold nanoparticle surface while the PMPC chains serve as a stabilizing block, producing highly biocompatible gold sols in aqueous solution at ambient temperature without any external reducing agent. The size and shape of gold nanoparticles could be readily controlled by tuning synthesis parameters such as the block composition and the relative and absolute concentrations of the PMPC-PDMA diblock copolymer and HAuCl4. These highly biocompatible gold sols have potential biomedical applications.     

P(OEGMA-co-LMA) hyperbranched amphiphilic copolymers as self-assembled nanocarriers

We report on the synthesis of novel amphiphilic hyperbranched copolymers, namely Hyperbranched-[poly (ethylene glycol) methyl ether methacrylate-co-lauryl methacrylate] (H-[P(OEGMA-co-LMA)]), obtained by reversible addition-fragmentation chain transfer (RAFT) polymerization utilizing the divinyl monomer, ethylene glycol dimethacrylate (EGDMA) as the branching agent. Molecular characterization by size exclusion chromatography (SEC) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy indicated the success of the polymerization. The self-assembly behavior in aqueous media was investigated by light scattering techniques and fluorescence spectroscopy. The hyperbranched copolymers form multimolecular aggregates of nanoscale dimensions with a low critical aggregation concentration. In addition, the model hydrophobic drug, curcumin (CUR), known also for its intrinsic fluorescence properties, was used in order to investigate the H-[P(OEGMA-co-LMA)] copolymers drug encapsulation ability. Curcumin is successfully loaded into the polymeric nanoparticles, as confirmed by dynamic light scattering and UV–Vis spectroscopy. Interestingly, curcumin hydrophobic interactions with the hyperbranched copolymers result in more well-defined co-assembled nanostructures, in terms of size and size distribution. The mixed copolymer-CUR nano-assemblies consist of small size nanoparticles (<100 nm) which exhibit relatively high size uniformity, colloidal stability and fluorescent properties. Overall, results signify that the biocompatible H-[P(OEGMA-co-LMA)] nanostructures could potentially serve as nanocarrier systems for drug delivery and bio-imaging applications.     

Preparation and characterization of biodegradable nanoparticles based on amphiphilic poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) triblock copolymer

Amphiphilic triblock copolymers of poly(3-hydroxybutyrate)-poly(ethylene glycol)-poly(3-hydroxybutyrate) (PHB-PEG-PHB) were directly synthesized by the ring-opening copolymerization of β-butyrolactone monomer using PEG as macroinitiator. Their structure, thermal properties and crystallization were investigated by ¹H NMR, differential scanning calorimetry (DSC) and X-ray diffraction. It was found that both PHB and PEG blocks were miscible. With the increase in the PHB block length, the triblock copolymers became amorphous because amorphous PHB block remarkably depressed the crystallization of the PEG block. Biodegradable nanoparticles with core-shell structure were prepared in aqueous solution from the amphiphilic triblock copolymers, and characterized by ¹H NMR, SEM and fluorescence. The hydrophobic PHB segments formed the central solid-like core, and stabilized by the hydrophilic PEG block. The nanoparticle size was close related to the initial concentrations of the nanoparticle dispersions and the compositions of the triblock copolymers. Moreover, the PHB-PEG-PHB nanoparticles also showed good drug loading properties, which suggested that they were very suitable as delivery vehicles for hydrophobic drugs.     

Biofunctionalized block copolymer nanoparticles based on ring‐opening metathesis polymerization

We present an approach to the synthesis of biofunctionalized block copolymer nanoparticles based on ring‐opening metathesis polymerization; these nanoparticles may serve as novel scaffolds for the multivalent display of ligands. The nanoparticles are formed by the self‐assembly of diblock copolymers composed of a hydrophobic block and a hydrophilic activated block that can be functionalized with thiolated ligands in aqueous media. The activated block enables control over the orientation of the displayed ligands, which may be sugars, peptides, or proteins engineered to contain cysteine residues at suitable locations. The nanoparticle diameter can be varied over a wide range through changes in the composition of the block copolymer, and biofunctionalization of the nanoparticles has been demonstrated by the attachment of a peptide previously shown to inhibit the assembly of anthrax toxin. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 928–939, 2006     

pH-responsive vesicles based on a hydrolytically self-cross-linkable copolymer

A new type of shape-persistent, pH-responsive vesicle was prepared by the self-assembly of a novel poly(ethylene oxide)-block-poly[2-(diethylamino)ethyl methacrylate-stat-3-(trimethoxysilyl)propyl methacrylate], PEO-b-P(DEA-stat-TMSPMA), copolymer. Vesicles were formed spontaneously in aqueous THF solution, with the hydrophilic PEO chains forming the corona and the pH-sensitive P(DEA-stat-TMSPMA) blocks being located in the membrane walls. Hydrolytic cross-linking within the hydrophobic membrane walls fixed the vesicle morphology. The resulting colloidally stable vesicles were characterized by 1H NMR, transmission electron microscopy (TEM), dynamic laser light scattering (DLS), and stopped-flow fluorescence experiments. The latter technique indicated that the permeability of the vesicle walls was sensitive to the pH of the aqueous solution, as expected. Gold-decorated vesicles were obtained by in situ reduction of AuCl4- anions to produce gold nanoparticles within the vesicle walls. (Yellow, hydrophilic PEO; green, pH-responsive DEA residues; blue, hydrolytically self-cross-linkable TMSPMA residues.)     

Inorganic–Organic Hybrid Nanoparticles with Biocompatible Calcium Phosphate Thin Shells for Fluorescence Enhancement

Polymeric micelles consisting of asymmetric triblock copolymers were successfully used for fabrication of robust hybrid nanoparticles with highly biocompatible calcium phosphate shells. The hydrophobic polystyrene core encapsulates hydrophobic fluorescent dyes such as Nile red. The anionic polyacrylic acid provides the site for the mineralization reaction of calcium phosphate. The polyethylene glycol corona stabilizes the hybrid nanoparticles. Fluorescent dyes can be used as imaging agents for determining the location of the nanoparticles and to give an observable indication of drug delivery, while the calcium phosphate shell can enhance the fluorescence of the encapsulated dye.     

Synthesis and stabilization of monodisperse Fe nanoparticles

Monodisperse Fe nanoparticles are synthesized via a simple one-pot thermal decomposition of Fe(CO)5 in the presence of oleylamine. Controlled oxidation of the iron surface leads to crystalline Fe3O4 shell and results in dramatic increase of chemical and dispersion stability of the nanoparticles. Surface ligand exchange is readily applied to transfer the core/shell nanoparticles from hydrophobic to hydrophilic, and a stable aqueous nanoparticle dispersion in PBS is formed. The functionalized nanoparticles are suitable for biomolecule attachment and biomedical applications.     

Silica nanoparticles at interfaces modulated by amphiphilic polymer and surfactant

The interfacial behavior of silica nanoparticles in the presence of an amphiphilic polymer poly( N-isopropylacrylamide) (PNIPAM) and an anionic surfactant sodium dodecyl sulfate (SDS) is studied using neutron reflectivity. While the nanoparticles do not show any attraction to hydrophilic and hydrophobic surfaces in pure water, presence of the amphiphilic polymer induces significant adsorption of the nanoparticles at the hydrophobic surface. This interfacial behavior is activated due to interaction of the nanoparticles with PNIPAM, the amphiphilic nature of which leads to strong adsorption at a hydrophobic surface but only weak interaction with a hydrophilic surface. The presence of SDS competes with nanoparticle-PNIPAM interaction and in turn modulates the interfacial properties of the nanoparticles. These adsorption results are discussed in relation to nanoparticle organization templated by dewetting of charged polymer solutions on a solid substrate. Our previous studies showed that nanoparticle assembly can be induced to form complex morphologies produced by dewetting of the polymer solutions, such as a polygonal network and long-chain structures. This approach, however, works on a hydrophilic substrate but not on a hydrophobic substrate. These observations can be explained in part by particle-substrate interactions revealed in the present study.     

Self-assembly of polyoxometalate macroanion-capped pd0 nanoparticles in aqueous solution

The self-assembly behavior of polyoxometalate (POM) macroanion-capped 3-nm-radius Pd (0) nanoparticles in aqueous solution is reported. Pd(0) nanoparticles are synthesized from reducing K(2)PdCl(4) by using Dawson-type V-substituted POM K(9)[H(4)PV (IV)W(17)O(62)] (HPV(IV)) clusters as the reductant and stabilizer simultaneously in acidic aqueous solutions. The starting molar ratio of K(2)PdCl(4) to HPV(IV) (R value) in solution is important to the formation of Pd nanoparticles. When R < 0.6, approximately 20-nm-radius Pd(0) colloidal nanocrystals are formed. When R > or = 0.6, HPV-capped (and therefore negatively charged) 3-nm-radius Pd(0) nanoparticles are formed, which can further self-assemble into stable, hollow, spherical, 30-50-nm-radius supramolecular structures in solution without precipitation, as confirmed by light scattering and transmission electron microscopy studies. This structure resembles the unique supramolecular structure formed by hydrophilic POM macroanions in polar solvents, which we refer to as "blackberry" structures. It is the first evidence that the blackberry formation can occur in hydrophobic nanoparticle systems when the surface of nanoparticles is modified to be partially hydrophilic. Counterions play an important role in the self-assembly of Pd nanoparticles, possibly providing an attractive force for blackberry formation, which is the case for blackberry formation in POM macroanionic solutions. Our results suggest that the blackberry formation is not a specific property of POM macroions but most likely a general phenomenon for nanoparticles with relatively hydrophilic surfaces and suitable sizes and charges in a polar solvent.     

Strong deaggregating effect of a novel polyamino resorcinarene surfactant on gold nanoaggregates under microwave irradiation

Gold nanoparticles were prepared by ethylene glycol (EG) reducing gold chloride under microwave irradiation. The EG-stabilized gold colloids varied from red to blue with increasing amounts of EG, due to particle aggregation. Addition of the macrocyclic polyamine 2,8,14,20-tetranonyl-4,6,10,12,16,18,22,24-octa(1-aminoethylcarbamoyl)methoxyresorcinarene (TNMR) reversed nanoparticle aggregation under microwave irradiation and greatly improved their dispersion stability in aqueous solutions. These effects are likely due to the amphiphilic nature of TNMR, which has a large hydrophilic headgroup with eight amino groups and four hydrophobic chains. Moreover, the large and flexible hydrophilic groups containing more N and O atoms in the TNMR molecule has a strong stretching and penetrating ability in the aqueous solution, and TNMR molecules can easily form a bilayer protecting structure on the surface of gold nanoparticles, which plays a critical role in the color-change process of the EG-stabilized gold colloid.     

A fluorescent and chemiluminescent difunctional mesoporous silica nanoparticle as a label for the ultrasensitive detection of cancer cells

A new kind of ultrabright fluorescent and chemiluminescent difunctional mesoporous silica nanoparticle (FCMSN) is reported. A luminescent dye, Rhodamine 6G or tris(2,2′-bipyridyl)dichlororuthenium(II) hexahydrate (Rubpy), is doped inside nanochannels of a silica matrix. The hydrophobic groups in the silica matrix avoid the leakage of dye from open channels. The amines groups on the surface of the FCMSN improve the modification performance of the nanoparticle. Because the nanochannels are isolated by a network skeleton of silica, fluorescence quenching based on the inner filter effect of the fluorescent dyes immobilized in nanochannels is weakened effectively. The Quantum Yield of obtained 90 nm silica particles was about 61%. Compared with the fluorescent core–shell nanoparticle, the chemiluminescence reagents can freely enter the nanoparticles to react with fluorescent dyes to create chemiluminescence. The results show that the FCMSN are both fluorescent labels and chemiluminescent labels. In biological applications, the NaIO₄ oxidation method was proven to be superior to the glutaraldehyde method. The amount of amino could affect the specificity of the FCMSN. The fluorescence microscopy imaging demonstrated that the FCMSN is viable for biological applications.     

Enhanced stability of Janus nanoparticles by covalent cross-linking of surface ligands

A mercapto derivative of diacetylene was used as the hydrophilic ligand to prepare Janus nanoparticles by using hydrophobic hexanethiolate-protected gold (AuC6, diameter 5 nm) nanoparticles as the starting materials. The amphiphilic surface characters of the Janus nanoparticles were verified by contact angle measurements, as compared to those of the bulk-exchange counterparts where the two types of ligands were distributed rather homogeneously on the nanoparticle surface. Dynamic light scattering studies showed that the Janus nanoparticles formed stable superstructures in various solvent media that were significantly larger than those by the bulk-exchange counterparts. This was ascribed to the amphiphilic characters of the Janus nanoparticles that rendered the particles to behave analogously to conventional surfactant molecules. Notably, because of the close proximity of the diacetylene moieties on the Janus nanoparticle surface, exposure to UV irradiation led to effective covalent cross-linking between the diacetylene moieties of neighboring ligands, as manifested in UV-vis and fluorescence measurements where the emission characteristics of dimers and trimers of diacetylene were rather well-defined, in addition to the monomeric emission. In contrast, for bulk-exchange nanoparticles, no trimer emission could be identified, and the intensity of dimer emission was markedly lower (though the intensity increased with increasing diacetylene coverage on the particle surface) under the otherwise identical experimental conditions. This is largely because the diacetylene ligands were distributed on the entire particle surface, and it was difficult to find a large number of ligands situated closely so that the stringent topochemical principles for the polymerization of diacetylene derivatives could be met. Importantly, the cross-linked Janus nanoparticles were found to exhibit marked enhancement of the structural integrity, which was attributable to the impeded surface diffusion of the thiol ligands on the nanoparticle surface, as manifested in fluorescence measurements of aged nanoparticles.     

Poly(dimethylaminoethyl methacrylate)‐b‐poly(hydroxypropyl methacrylate) copolymers: Synthesis and pH/thermo‐responsive behavior in aqueous solutions

The synthesis and self‐assembly properties in aqueous solutions of novel amphiphilic block copolymers composed of one hydrophilic, pH and temperature responsive poly(dimethyl amino ethyl methacrylate) (PDMAEMA) block and one weakly hydrophobic, water insoluble, potentially thermoresponsive poly(hydroxy propyl methacrylate) (PHPMA) block, are reported. The block copolymers were prepared by RAFT polymerization and were molecularly characterized by size exclusion chromatography, NMR, and FTIR spectroscopies. The PDMAEMA‐b‐PHPMA amphiphilic block copolymers self‐assemble in different nanostructured aggregates when inserted in aqueous media. The effects of different solubilization protocols, as well as the effects of solution temperature and pH on the structure of the aggregates, are studied by light scattering and fluorescence spectroscopy measurements. Experimental results indicate that there is a number of solution preparation and physicochemical parameters that allow the control and manipulation of the structure and thermoresponsive properties of PDMAEMA‐b‐PHPMA aggregates in aqueous media. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1962–1977     

Monodisperse MFe2O4 (M = Fe, Co, Mn) nanoparticles

High-temperature solution phase reaction of iron(III) acetylacetonate, Fe(acac)(3), with 1,2-hexadecanediol in the presence of oleic acid and oleylamine leads to monodisperse magnetite (Fe(3)O(4)) nanoparticles. Similarly, reaction of Fe(acac)(3) and Co(acac)(2) or Mn(acac)(2) with the same diol results in monodisperse CoFe(2)O(4) or MnFe(2)O(4) nanoparticles. Particle diameter can be tuned from 3 to 20 nm by varying reaction conditions or by seed-mediated growth. The as-synthesized iron oxide nanoparticles have a cubic spinel structure as characterized by HRTEM, SAED, and XRD. Further, Fe(3)O(4) can be oxidized to Fe(2)O(3), as evidenced by XRD, NEXAFS spectroscopy, and SQUID magnetometry. The hydrophobic nanoparticles can be transformed into hydrophilic ones by adding bipolar surfactants, and aqueous nanoparticle dispersion is readily made. These iron oxide nanoparticles and their dispersions in various media have great potential in magnetic nanodevice and biomagnetic applications.