Spectrofluorometric determination of zinc with 1,5-bis(2,3-dihydroxyphenylmethylene) thiocarbohydrazone

1,5-Bis(2,3-dihydroxyphenylmethylene)thiocarbohydrazone was synthesized; its ionization constants are reported. A procedure is described for the spectrofluorimetric determination of 5–540 ng ml^?1 zinc in 60/40 (v/v) ethanol/water medium, acetate-buffered to apparent pH 6.5 (λ_ex=400 nm, λ_em=508 nm). Interferences were evaluated and the procedure was applied with good results to the determination of zinc in potable waters (0.3–3 μg ml^?1) and lubricating oils.     

Determination of mixtures of ampicillin and cloxacillin in pharmaceuticals by second-derivative spectrophotometry

Mixtures of ampicillin-Na and cloxacillin-Na are assayed by peak-to-baseline and zero-crossing second-derivative spectrophotometry. The procedure does not require any separation step. Calibration plots are linear (r = 0.9999) up to 30 μg ml^?1 of ampicillin-Na at 216 nm and up to 40 μg ml^?1 ampicillin-Na or cloxacillin-Na at 228 nm or 248.8 nm, respectively, in the presence of one another. Detection limits at the p = 0.05 level of significance, range from 0.15 pg ml^?1 to 0.33 μg ml^?1. The method was successfully applied to commercial injections and capsules containing these penicillins.     

Selective Kinetic Spectrophotometric Determination of Nitrite in Food and Water

Abstract

A highly selective and sensitive method for the kinetic spectrophothometric determination of sub-microgram amounts of nitrite has been development based on its reaction with Nile blue 2B in acidic medium. The reaction is monitored spectrophotometrically at 595 nm at a fixed time of 4.5 min. The change in absorbance at 595 nm is related to the concentration of nitrite in the range 0.005 - 1.100 μg.ml^?1 The detection limit is 0.001 μg.ml^?1. The relation standard deviation is 1% for 0.020 μg.ml^?1 of nitrite for ten replicate measurements. Most common anions and cations do not interfere. The procedure was applied to the determination of trace amounts of nitrite in sausage and water.     

Colorimetric Determination of Propofol in Bulk form,Dosage Form and Biological Fluids

ABSTRACT

Propofol is coupled with 2, 6-dichloroquinone-4-chlorimide (DCQ) in a reaction buffered at pH 9.6 to give a colored product having an analytically useful maximum at 635 nm. The factors affecting the color generation were optimized and incorporated in the procedure. The reacted propofol has a molar absorptivity of 3.9 × 10^?4 L mol^?1 cm^?1, and Beer's law is obeyed for concentrations 1-5 μg ml^?1 with detection limit 0.25 μg ml^?1. The method was found applicable to biological fluids (plasma and urine) spiked with propofol at concentration levels 1-5 μg ml^?1 for plasma and 1-5 μg 0.5 ml^?1 urine (less sensitivity is obtained with urine volumes above 0.5 ml) with detection limits 0.28 μg ml^?1 for plasma and 0.4 μg 0.5 ml^?1 urine. The average recovery for the commercial preparation (1% w/v propofol emulsion intravenous injection for infusion) was 99.54% with an RSD of 1.05%. The method was validated by an adopted HPLC method. The results obtained by the HPLC method for the commercial preparation were statistically compared with the proposed method and evaluated at the 95% confidence limits.     

Simultaneous Determination of Valsartan and Hydrochlorothiazide in Tablets by High-Performance Liquid Chromatography

ABSTRACT

A method for the simultaneous determination of valsartan and hydrochlorothiazide in tablets is described. The procedure, based on the use of reversed-phase high-performance liquid chromatography, is linear in the concentration range 5.0-10.0 μg ml^?1 for valsartan and 0.5-2.0 μg ml^?1 for hydrochlorothiazide, is simple and rapid and allows accurate and precise results. The limit of detection was 1.0 μg ml^?1 for valsartan and 0.05 μg ml^?1 for hydrochlorothiazide.     

Determination of phosphorus in biological tissues by aluminium block digestion and flow-injection spectrophotometry

Biological tissues are digested with nitric and perchloric acids in a heated aluminium block. Flow-injection spectrophotometry is then used to measure phosphate via the phosphovanadomolybdate complex at 413 nm. The detection limit is 0.3 μg ml^?1 phosphorus; relative standard deviations are 0.7% and 0.4% at 1 μg ml^?1 and 25 μg ml^?1 phosphorus, respectively. Interferences are discussed. The decomposition procedure is evaluated for model compounds and standard reference materials.     

Sensitivity enhancement by palladium addition in the electrothermal atomic absorption spectrometry of mercury

In graphite-furnace atomic absorption spectrometry of mercury, addition of 50 μg ml^?1 palladium improves the peak height for 5 μg Hg ml^?1 50 times. Further addition of 20 μg ml^?1 platinum doubles the enhanced peak height. The effect is due to amalgam formation. The best sensitivity is 0.3 ng (1% absorption) and the detection limit is 0.1 ng. The method allows higher ashing temperatures than for solutions without noble metal addition and can be applied to solutions containing substantial amount of organic matter.     

Utility of p-chloranilic Acid and 2,3 Dichloro-5,6-dicyano p-Benzoquinone (DDQ) for the Spectrophotometric Determination of Triamterene

Abstract

Two simple and sensitive spectrophotometric procedures are suggested for analysis of triamterene. The first procedure is based on the reaction of triamterene with p-chloranilic acid (p-CA) in methylene chloride to form a highly stable coloured product, exhibiting maximum absorbance at λ 530 nm. Beer's law is obeyed in the range of 40–220 μg.ml^?1 with a mean percentage accuracy of 99.98 ± 0.446. Limit of determination is 20 μg.ml^?1. In the second procedure, the drug is determined via charge transfer complex formation with 2,3 dichloro-5,6-dicyano p-benzoquinone (DDQ) using methylene chloride as a solvent. Here the reaction product has two well defined maxima at 460 nm and 530 nm where each has been utilized for quantitative determination. Beer's law is obeyed in concentration ranges of 25–125 μg.ml^?1 and 25–150 μg.ml^?1 with mean percentage accuracies of 99.92 ± 0.449 and 100.00 ± 0.511 for both maxima. 460 and 530 nm. respectively. Limit of determination is 12.5 μg.ml^?1 at both maxima. Optimum conditions for each procedure have been studied and the stoichiometry of both reactions was ascertained using Job's method of continuous variation. The validity of the suggested procedures was assessed by applying the standard addition technique using the drug capsules. Both procedures are statistically analyzed as compared with BP method for analysis of triamterene (non aqueous titration) revealing good accuracy and precision as indicated by t and F tests.     

Magnetic solid-phase extraction of rose bengal using iron oxide nanoparticles modified with cetyltrimethylammonium bromide

Magnetic solid phase extraction (MSPE) based on cetyltrimethylammonium bromide (CTAB)-coated magnetic iron oxide nanoparticles (C-MIONPs) was investigated for the separation, preconcentration and determination of Rose Bengal (RB) in aqueous solutions. The influences of different analytical parameters such as pH, temperature, ionic strength, volume of desorbent solvent, amount of adsorbent and interfering ions in the adsorption of RB on C-MIONPs were investigated. The RB adsorption on C-MIONPs follows Langmuir isotherm. The sizes of C-MIONPs were in the range of 20–80 nm. The method was capable of determining RB concentration in the range of 0.01–1.20 μg ml^?1. The limit of detection (LOD) of RB based on three times the standard deviation of the blank (3Sb) was found to be 5.91 × 10–3 μg ml^?1 (n = 8). The relative standard deviation (RSD) for 0.3 μg ml^?1 and 0.8 μg ml^?1 of RB were 4.1% and 1.1%, respectively. The proposed method was applied to the determination of RB in Brucella Antigen solution and water samples from the Karoon River.     

Kinetic spectrophotometric determination of trace manganese (II) with dahlia violet in nonionic microemulsion medium

A new catalytic kinetic spectrophotometric method has been developed for the determination of trace amount of manganese (II) in nonionic microemulsion medium. The method is based on the catalytic effect of manganese (II) on the oxidation of dahlia violet by potassium periodate with nitrilotriacetic acid as an activitor in the presence of nonionic microemulsion. Under the optimum conditions, the calibration graph is linear in the range of 0.0004-0.0056 μg ml⁻¹ of manganese (II) at 580 nm. The detection limit achieved is 3.75×10⁻⁵ μg ml⁻¹. Manganese (II) in foodstuff samples was determined with satisfactory results.     

Flow-Injection Chemiluminescence Determination of Fluoroquinolones

ABSTRACT

A new flow-injection CL method was developed for the determination of fluoroquinolones including ofloxacin, norfloxacin, ciprofloxacin and lomefloxacin in pharmaceutical preparations, based on the chemiluminescence reaction of sulphite with cerium(IV) sensitized by these compounds. The linear ranges are 0.04 to 4.0 μg ml^?1 for ofloxacin and 0.4 to 40.0 μg ml^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The detection limits are 0.016 μg ml^?1 for ofloxacin and 0.16 μg ml ^?1 for norfloxacin, ciprofloxacin and lomefloxacin, respectively. The relative standard deviations (RSD) are 2.1 to 2.6% (n=10) for these fluoroquinolones. The analytical procedure has been applied to the determination of the fluoroquinolones in pharmaceutical commercial formulations. The results are in agreement with those obtained by the official methods.     

Direct determination of nickel in gas oil by atomic absorption spectrometry with electrothermal atomization

A rapid graphite-furnace atomic absorption procedure with simple dilution of samples was tested for the direct determination of sub-ppm levels of nickel in gas oils. The selection of appropriate graphite-furnace parameters, the type of solvent and organometallic standard, the effect of gas oil concentration in diluted samples, precision, accuracy and detection limit were investigated. Sample dilution was necessary because of high viscosity. Results obtained by standard addition for heavy gas oils were confirmed by a wet-ashing flame atomic absorption procedure. The relative standard deviation (r.s.d.) for consecutive determinations of nickel in gas oil solution containing 19 μg Ni l^?1 was 3.1%, and day-to-day r.s.d. for a reference gas oil sample was 5.3%. Accuracy was determined with an NBS standard reference oil GM-5 (4.6 ± 4.7% relative error in four determinations). Recovery experiments gas 104 ± 12% of the added nickel.     

Determination of Steroids in Human Urine by Micellar Liquid Chromatography

Abstract

A simple and sensitive method for the determination of steroids using micellar liquid chromatography is described. The steroids, including hydroxycorticosterone. corticosterone, northisterone, testosterone, mexdroprogesterone acetate and progesterone, were separated by reversed-phase using a micelles mobile phase following UV detection at 245 nm. The parameters affecting retention of the test solutes such as the concentration of sodium dodecyl sulfate (SDS) and n-butanol-1 in the mobile phase were investigated. It was found that the retention of the solutes was dependent on the composition of mobile phase. The linear calibration plots range from 0.1 to 10 μg ml^?1 in mobile phase containing 5.0 × 10^?2 mol l^?1 SDS/9 % n-butanol-1 at pH 6.0, and the detection limit in order of 0.1 μg ml^?1 was obtained. The proposed method was used for the determination of steroids in urine using direct injection of samples without previous treatment.     

Flow-injection spectrophotometric determination of ascorbic acid by reduction of vanadotungstophosphoric acid

Ascorbic acid may be determined spectrophotometrically at 360 nm based on reduction of vanadotungstophosphoric acid using flow-injection analysis. The carrier stream was distilled water and the reagent streams were buffer solution (pH 3.0), 1.735 × 10^?3 M dodecatungstophosphoric acid and 1.735 × 10^?3 M sodium vanadate. The injection rate was 80 h^?1. The calibration graph was linear up to 80 μg ml^?1 ascorbic acid and the relative standard deviation for the determination of 20 μg ml^?1 ascorbic acid was 1.5% (n=10). The detection limit was 1.0 μg ml^?1 ascorbic acid, based on an injection volume of 250 μl. The system was applied to the determination of ascorbic acid in vitamin C tablets.     

Determination of vanadium and titanium in steel by inductively coupled plasma atomic emission spectrometry with modified use of a tungsten boat furnace atomizer for atomic absorption spectrometry

For electrothermal sample introduction, a commercially available tungsten boat atomizer for atomic absorption spectrometry (AAS) was transferred to a vaporizer for inductively coupled plasma atomic emission spectrometry (ICP-AES). The modification retained as much of the original design of the atomizer as possible, so that the apparatus could be switched easily between conventional tungsten boat furnace (TBF)-AAS and TBF-ICP-AES. By using this system, a procedure for the determination of vanadium and titanium in steel was investigated. The detection limits (S/N=3) of vanadium and titanium were 3.9 and 1.5 ng ml^?1, respectively. The relative standard deviations for five replicate determinations were ca. 3% for both elements. The calibration graphs were linear up to 100 μg ml^?1 vanadium(V) and 10 μg ml^?1 titanium(IV). Results of analyses of some low-alloy steel samples are given.     

Determination of 1,4-thienodiazepines by liquid chromatography with spectrophotometric,amperometric and coulometric detection

Spectrophotometric, amperometric and coulometric methods of detection for the liquid chromatographic determination of four 1,4-thienodiazepines were compared. The effects of several experimental parameters on the separation and sensitivity of the method was evaluated. A mobile phase consisting of methanol—water (60 + 40) and containing ammonium acetate buffer (pH 7) appeared to be optimal when using a 4-μm Novapak ODS column. The amperometric and coulometric detectors, equipped with glassy carbon electrodes, were operated at +1.05 V vs. Ag/AgCl. The limits of detection obtained ranged from 0.05 to 0.2 μg ml^?1 for spectrophotometric detection, from 0.05 to 0.2 μg ml^?1 for amperometric detection and from 0.006 to 0.02 μg ml^?1 for coulometric detection.     

Indirect determination of fluoride in waters with lanthanum alizarin complexone and inductively-coupled plasma emission spectrometry

Fluoride is determined indirectly by measurement of the La II 333.75-nm line in the lanthanum/alizarin complexone/fluoride complex. The ternary complex is extracted into hexanol containing N,N-diethylaniline and the extract is introduced directly into the plasma. Related to water samples, the detection limit (3σ, concentration factor 5) is 0.59 ng ml^?1 fluoride, calibration is linear up to 1.2 μg ml^?1 and the relative standard deviation for 0.04 μg ml^?1 is 2.6%. Alkali, alkali elements and most anions do not interfere. The method is applied in the analysis of river water, coastal seawater and drinking water.     

Determination of Molybdenum in Human Urine by Spectrophotometric Method using Thiazolylazo Compounds as Chromogenic Reagents

ABSTRACT

Four azo compounds based on diazotization of 2-aminobenzothiazole have been synthesized and characterized by elemental analysis as well as different spectroscopic techniques. The potentiality of the prepared compounds as new chromogenic reagents for the spectrophotometric determination of Mo⁶⁺ was studied by extensive investigation of optimum conditions favouring the formation of the coloured complexes. Beers law is obeyed in the concentration range 0.2-8.5 μg ml^?1 whereas Ringbom optimum concentration range was 0.8-7.5 μg ml^?1. The detection limit was 0.05 μg ml^?1. The molar absorptivity and Sandell sensitivity of the formed complexes are calculated. The effect of interfering ions on the determination of Mo⁶⁺ was investigated. The relative standard deviations for six replicate determinations of 5.0 μg ml^?1 of Mo⁶⁺ are 1.23, 1.47, 1.05 and 1.38 % using reagents I, II, III and IV, respectively. The proposed method has been applied to investigate the amount of Mo⁶⁺ in human urine samples. The molybdenum levels found between 0.5-2.1 μg/100 ml.     

Biomethylation and biotransformation of arsenic in a freshwater food chain: Green alga (chlorella vulgaris)→shrimp (neocaridina denticulata)→killifish (oryzias iatipes)

Tolerance, bioaccumulation, biotransformation and excretion of arsenic compounds by the fresh–water shrimp (Neocaridina denticulata) and the killifish (Oryzias latipes) (collected from the natural environment) were investigated. Tolerances (LC₅₀) of the shrimp against disodium arsenate [abbreviated as As(V)], methylarsonic acid (MAA), dimethylarsinic acid (DMAA), and arsenobetaine (AB) were 1.5, 10, 40, and 150μg As ml^?1, respectively. N. denticulata accumulated arsenic from an aqueous phase containing 1 μg As ml^?1 of As(V), 10 μg As ml^?1 of MAA, 30 μg As ml^?1 of DMAA or 150 μg As ml^?1 of AB, and biotransformed and excreted part of these species. Both methylation and demethylation of the arsenicals were observed in vivo. When living N. denticulata accumulating arsenic was transferred into an arsenic–free medium, a part of the accumulated arsenic was excreted. The concentration of methylated arsenicals relative to total arsenic was higher in the excrement than in the organism. Total arsenic accumulation in each species via food in the food chain Green algae (Chlorella vulgaris) → shrimp (N. denticulata) → killifish (O. latipes) decreased by one order of magnitude or more, and the concentration of methylated arsenic relative to total arsenic accumulated increased successively with elevation in the trophic level. Only trace amounts of monomethylarsenic species were detected in the shrimp and fish tested. Dimethylarsenic species in alga and shrimp, and trimethylarsenic species in killifish, were the predominant methylated arsenic species, respectively.     

Phosphorescence detection in flowing systems: selective determination of aluminium by flow-injection liquid room-temperature phosphorimetry

The concept of the micelle stabilized liquid room-temperature phosphorescence (MS-LRTP) was applied to the determination of a metal (aluminium) in a flowing system. A three-line flow-injection manifold was developed and various parameters were optimized. A linear calibration graph was obtained for 0–4 μg ml^?1 aluminium. The limit of detection was 50 ng ml^?1 and the relative standard deviations for 0.1 and 1.0 μg ml^?1 aluminium were 2.7 and 1.3% respectively. The proposed procedure is fairly selective. More than 20 common ions studied did not interfere with the determination of aluminium or could be masked by appropriate reagents. The flow-injection method proposed was applied without any preliminary separation to the determination of aluminium in simulated synthetic samples in water and in clinical samples of particular importance in the control of aluminium toxicity in renal failure patients.