Detection of Benzo[a]pyrene in Fried Food by Ultrasound-Assisted Matrix Solid-Phase Dispersion and Isotope Dilution GC–MS

A simple, sensitive and reliable analytical method was developed for the detection of benzo[a]pyrene in fried food using gas chromatography-mass spectrometry with an isotope-labelled internal standard. Samples were directly extracted and purified by the ultrasound-assisted matrix solid-phase dispersion (MSPD) procedure. The simple pretreatment procedures were tested with different absorbents (C18, NH₂, Oasis, and SiO₂). The optimal ultrasonication-assisted MSPD was achieved by MSPD-SiO₂ and sonication for 10 min in an ultrasonic bath. The samples were quantified using benzo[a]pyrene-d₁₂ as the internal standard. An analysis of the samples spiked with different levels of benzo[a]pyrene showed recoveries ranging from 84.6 to 103.2 %, with an RSD of 3.21–8.32 %, depending on the spiking level. This method was thus shown to be suitable for the detection of benzo[a]pyrene in fried food.     

Monofluorinated polycyclic aromatic hydrocarbons as internal standards in Shpol’skii spectroscopy: 1-fluoropyrene as an example

As a sequel to an earlier paper, we have studied the behaviour of 1-fluoropyrene and pyrene in lamp-excited Shpol’skii spectrofluorimetry at 11 K in two different matrices, n-octane and n-hexane, using two different solidification processes. Particular attention is paid to the suitability of 1-fluoropyrene as an internal standard (IS) to correct for different sources of variability. As a demonstration of the applicability of this approach, four polycyclic aromatic hydrocarbons (PAHs; pyrene, chrysene, benzo[a]pyrene and benzo[k]fluoranthene) were determined in a river sediment extract. The results agreed well with those obtained by HPLC with fluorescence detection.     

Determination of heavy polycyclic aromatic hydrocarbons of concern in edible oils via excitation–emission fluorescence spectroscopy on nylon membranes coupled to unfolded partial least-squares/residual bilinearization

Seven heavy polycyclic aromatic hydrocarbons (PAHs) of concern on the US Environmental Protection Agency priority pollutant list (benzo[a]anthracene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-c,d]-pyrene) were simultaneously analyzed in extra virgin olive oil. The analysis is based on the measurement of excitation–emission matrices on nylon membrane and processing of data using unfolded partial least-squares regression with residual bilinearization (U-PLS/RBL). The conditions needed to retain the PAHs present in the oil matrix on the nylon membrane were evaluated. The limit of detection for the proposed method ranged from 0.29 to 1.0 μg kg^?1, with recoveries between 64 and 78 %. The predicted U-PLS/RBL concentrations compared favorably with those measured using high-performance liquid chromatography with fluorescence detection. The proposed method was applied to ten samples of edible oil, two of which presented PAHs ranging from 0.35 to 0.63 μg kg^?1. The principal advantages of the proposed analytical method are that it provides a significant reduction in time and solvent consumption with a similar limit of detection as compared with chromatography.

Paper electrophoresis with surface-enhanced fluorimetric detection

Amorphous fumed silica was used as a fluorescence sensitizer coated on a filter-paper substrate for use in paper electrophoresis. The usefulness of the separation method was illustrated for a mixture of two polynuclear aromatic compounds of biological interest: benzo[a]pyrene (BaP) and benzo[a]pyrene-r-7,t-8,9,10-tetrahydrotetrol, a hydrolysis product of BaP—DNA adduct. These two compounds were well separated and an enhancement of the fluorescence intensity was also observed when the sensitizer was applied to filter-paper prior to electrophoretic separation.     

Detection of Benzo[a]pyrene in Fried Food by Ultrasound-Assisted Matrix Solid-Phase Dispersion and Isotope Dilution GC–MS

A simple, sensitive and reliable analytical method was developed for the detection of benzo[a]pyrene in fried food using gas chromatography-mass spectrometry with an isotope-labelled internal standard. Samples were directly extracted and purified by the ultrasound-assisted matrix solid-phase dispersion (MSPD) procedure. The simple pretreatment procedures were tested with different absorbents (C18, NH₂, Oasis, and SiO₂). The optimal ultrasonication-assisted MSPD was achieved by MSPD-SiO₂ and sonication for 10 min in an ultrasonic bath. The samples were quantified using benzo[a]pyrene-d₁₂ as the internal standard. An analysis of the samples spiked with different levels of benzo[a]pyrene showed recoveries ranging from 84.6 to 103.2 %, with an RSD of 3.21–8.32 %, depending on the spiking level. This method was thus shown to be suitable for the detection of benzo[a]pyrene in fried food.

     

On-line and in-situ detection of polycyclic aromatic hydrocarbons (PAH) on aerosols via thermodesorption and laser-induced fluorescence spectroscopy

A fiber optical sensor system for the determination of polycyclic aromatic hydrocarbons (PAH) on aerosols by laser-induced, time-resolved fluorescence is combined with a thermodesorption device. The sensor system is based on an aerosol flow cell, which is fibre-optically coupled to a pulsed nitrogen laser for excitation and the detection system. Time-resolved fluorescence emission spectra are detected by a monochromator equipped with a photomultiplier and a fast digital storage oscilloscope. The analytical figures of merit of the thermodenuder are reported for benzo[a]pyrene, benzo[b]fluoranthene, and benzo[ghi]-perylene on ultrafine soot and NaCl aerosols. By thermodesorption of the PAH, problems due to quenching of the PAH fluorescence by the bulk aerosol material or excimer formation on the aerosol surface were avoided. For the PAH under study, the sensitivity was improved considerably and detection limits between 110 and 850 ng m^–3 were attained, while a response time of 2–3 min was achieved with the thermodenuder. A calibration for PAH on ultrafine soot and NaCl aerosols was established independent of the aerosol substrate.     

A novel application of nylon membranes to the luminescent determination of benzo[a]pyrene at ultra trace levels in water samples

Very simple and highly sensitive methods are presented for the determination of benzo[a]pyrene, one of the most carcinogenic polycyclic aromatic hydrocarbons (PAHs). The approaches are based on solid-phase extraction of the analyte on a nylon membrane via a syringe procedure, and its fluorescent or phosphorescent determination on the solid surface. While the native fluorescence of benzo[a]pyrene retained on a nylon surface is measured directly, room-temperature phosphorescence is induced by spotting a few microlitres of thallium(I) nitrate solution on the surface (heavy-atom effect). An enhancement of the phosphorescence signal was corroborated when the measurements were carried under a nitrogen atmosphere. The analytical figures of merit obtained under the best experimental conditions demonstrate the capability of detecting benzo[a]pyrene at a sub-parts-per-trillion (sub-ng L⁻¹) level. The potential interference from other common PAHs and also from different metal ions was studied. The feasibility of determining benzo[a]pyrene in real samples was successfully evaluated through the analysis of spiked tap, underground and mineral water samples of different origins. Recoveries obtained from spiked river waters were successfully compared with those provided by a reference method, through rigorous statistical analysis.     

Sample preparation of sewage sludge and soil samples for the determination of polycyclic aromatic hydrocarbons based on one-pot microwave-assisted saponification and extraction

A microwave-assisted sample preparation (MASP) procedure was developed for the analysis of polycyclic aromatic hydrocarbons (PAHs) in sewage sludge and soil samples. The procedure involved the simultaneous microwave-assisted extraction of PAHs with n-hexane and the hydrolysis of samples with methanolic potassium hydroxide. Because of the complex nature of the samples, the extracts were submitted to further cleaning with silica and Florisil solid-phase extraction cartridges connected in series. Naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[e]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-cd]pyrene, were considered in the study. Quantification limits obtained for all of these compounds (between 0.4 and 14.8 μg kg⁻¹ dry mass) were well below of the limits recommended in the USA and EU. Overall recovery values ranged from 60 to 100%, with most losses being due to evaporation in the solvent exchange stages of the procedure, although excellent extraction recoveries were obtained. Validation of the accuracy was carried out with BCR-088 (sewage sludge) and BCR-524 (contaminated industrial soil) reference materials.     

Microheterogeneity evaluation of polycyclic aromatic hydrocarbons in particulate standard reference materials

With the emergence of highly sensitive analytical techniques, the microanalysis of natural-matrix materials employing smaller sample sizes is increasingly more common, which subsequently warrants a homogeneity assessment for the individual components at the appropriate sampling level. Pressurized liquid extraction (PLE) in combination with gas chromatography/mass spectrometry (GC/MS) has been used to determine the sampling constants and evaluate the relative homogeneity of trace levels of polycyclic aromatic hydrocarbons (PAHs) for two previously certified particulate standard reference materials, SRM 1649a Urban Dust and SRM 1650b Diesel Particulate Matter, in the milligram sampling range. Fluoranthene, pyrene, benz[a]anthracene and benzo[e]pyrene within SRM 1650b Diesel Particulate Matter were deemed to be homogeneous, based on relatively small sampling constants (K _S<100 mg), whereas the larger sampling constants (K _S>100 mg) obtained for all PAHs in SRM 1649a Urban Dust suggest more material heterogeneity. The material heterogeneity of ten individual PAHs (phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, benzo[k]fluoranthene, benzo[e]pyrene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene) was also described via nonlinear relationships (i.e., power law) between subsampling error S _s (%) and sample mass, which are used to predict analyte-specific minimum sample masses that result in a specific level of analytical uncertainty. Electronic supplementary material Supplementary material is available for this article at and is accessible for authorized users.     

Detection and quantification of PAH in drinking water by front-face fluorimetry on a solid sorbent and PLS analysis

The direct determination in drinking water of perylene, chrysene, pyrene, benzo[a]pyrene, and benzo[k]fluoranthene, by front-face synchronous fluorimetry on a commercial SPE disk, has been evaluated. Sorbent treatment, influence of humic substances, and pH effect are discussed. In pure water the detection limits were estimated to be in the range 0.03–0.01 g L^–1. A working pH in the range 10–11 was found to minimize the fluorescence quenching effect of humic substances. The proposed method combined with a partial-least-square (PLS) treatment was tested for quantitative analysis of mixtures of four PAH in a spiked drinking water.     

Improved efficiency of extraction of polycyclic aromatic hydrocarbons (PAHs) from the National Institute of Standards and Technology (NIST) Standard Reference Material Diesel Particulate Matter (SRM 2975) using accelerated solvent extraction

The efficiency of extraction of polycyclic aromatic hydrocarbons (PAHs) with molecular masses of 252, 276, 278, 300, and 302 Da from standard reference material diesel particulate matter (SRM 2975) has been investigated using accelerated solvent extraction (ASE) with dichloromethane, toluene, methanol, and mixtures of toluene and methanol. Extraction of SRM 2975 using toluene/methanol (9:1, v/v) at maximum instrumental settings (200 °C, 20.7 MPa, and five extraction cycles) with 30-min extraction times resulted in the following elevations of the measured concentration when compared with the certified and reference concentrations reported by the National Institute of Standards and Technology (NIST): benzo[b]fluoranthene, 46%; benzo[k]fluoranthene, 137%; benzo[e]pyrene, 103%; benzo[a]pyrene, 1,570%; perylene, 37%; indeno[1,2,3-cd]pyrene, 41%; benzo[ghi]perylene, 163%; and coronene, 361%. The concentrations of the following PAHs were comparable to the reference values assigned by NIST: indeno[1,2,3-cd]fluoranthene, dibenz[a,h]anthracene, and picene. The measured concentration of dibenzo[a,e]-pyrene was lower than the information value reported by the NIST. The measured concentrations of other highly carcinogenic PAHs (dibenzo[a,l]pyrene, dibenzo[a,i]pyrene, and dibenzo[a,h]pyrene) in SRM 2975 are also reported. Comparison of measurements using the optimized ASE method and using similar conditions to those applied by the NIST for the assignment of PAH concentrations in SRM 2975 indicated that the higher values obtained in the present study were associated with more complete extraction of PAHs from the diesel particulate material. Re-extraction of the particulate samples demonstrated that the deuterated internal standards were more readily recovered than the native PAHs, which may explain the lower values reported by the NIST. The analytical results obtained in the study demonstrated that the efficient extraction of PAHs from SRM 2975 is a critical requirement for the accurate determination of PAHs with high molecular masses in this standard reference material and that the optimization of extraction conditions is essential to avoid underestimation of the PAH concentrations. The requirement is especially relevant to the human carcinogen benzo[a]pyrene, which is commonly used as an indicator of the carcinogenic risk presented by PAH mixtures.     

Multichannel SPR biosensor for detection of endocrine-disrupting compounds

A surface plasmon resonance (SPR) biosensor for simultaneous detection of multiple organic pollutants exhibiting endocrine-disrupting activity, namely atrazine, benzo[a]pyrene, 2,4-dichlorophenoxyacetic acid (2,4-D) and 4-nonylphenol, is reported. The biosensor utilizes a multichannel SPR sensor based on wavelength modulation of SPR and wavelength division multiplexing (WDM) of sensing channels, antibodies as biorecognition element and a competitive immunoassay detection format. An analysis time of 45 min (including 30-min incubation of the sample with antibodies) and limits of detection as low as 0.05, 0.07, 0.16 and 0.26 ng mL⁻¹ are demonstrated for benzo[a]pyrene, atrazine, 2,4-D and 4-nonylphenol, respectively. The biosensor is also shown to be regenerable and suitable for repeated use.     

Near-infrared solid-state fluorescent naphthooxazine dyes attached with bulky dibutylamino and perfluoroalkenyloxy groups at 6- and 9-positions

No solid-state fluorescence is observed for 9-(diethylamino)benzo[a]phenoxazin-5-one (Nile Red). However, 9-dibutylamino-6-{perfluoro[4-methyl-3-(1-methylethyl)-2-penten]-2-oxy}benzo[a]phenoxazin-5-one showed fluorescence maximum at 717 nm in solid state with fluorescence quantum yield 0.024. X-ray crystallographic analysis suggests that prevention of network π−π interactions by the bulky fluorine-containing and dibutylamino groups is essential to show solid-state fluorescence.     

Development and validation of a differential scanning calorimetry purity determination method for polycyclic aromatic hydrocarbons

Based on a standard test method for purity by differential scanning calorimetry (DSC), ASTM E 928, a purity determination method for highly pure polycyclic aromatic hydrocarbons (PAHs) has been developed and validated. The robustness of the developed method was investigated by determining, under varying measurement conditions, the purity of two PAH certified reference materials (CRMs), benzo[c]phenanthrene and dibenzo[a,h]anthracene. The repeatability and intermediate precision of the developed method was determined by analysing the purity of benzo[c]phenanthrene and dibenzo[a,h]anthracene and PAH candidate CRMs indeno[1,2,3-c,d]pyrene, 6-methylchrysene and benzo[a]pyrene. The trueness of the method was studied using the same (candidate) CRMs and a series of 42 other PAH CRMs. For each of the five (candidate) CRMs, a full measurement uncertainty budget was developed. Also for PAH materials for which the DSC purity determination method has not been explicitly validated, the relative expanded measurement uncertainty was estimated.     

Analysis of EU priority polycyclic aromatic hydrocarbons in food supplements using high performance liquid chromatography coupled to an ultraviolet, diode array or fluorescence detector

High performance liquid chromatography coupled to an ultraviolet, diode array or fluorescence detector (HPLC/UV-FLD) has been used to set up a method to detect the 15(+1) EU priority polycyclic aromatic hydrocarbons (PAHs) in food supplements covering the categories of dried plants and plant extracts excluding oily products. A mini validation was performed and the following parameters have been determined: limit of detection, limit of quantification, precision, recovery and linearity. They were in close agreement with quality criteria described in the Commission Regulation (EC) No 333/2007 concerning the PAH benzo[a]pyrene in foodstuffs, except the not fluorescent cyclopenta[c,d]pyrene for which the UV detection leads to a higher limit of detection. Analysis of twenty commercial food supplements covering mainly the class of dried plants was performed to evaluate their PAHs contamination levels and to test the applicability of the method to various plant matrices. Fifty percent of analyzed samples showed concentration exceeding 2 μg kg⁻¹ for one or more PAHs.     

Room-temperature excitation-emission phosphorescence matrices and second-order multivariate calibration for the simultaneous determination of pyrene and benzo[a]pyrene

The present article describes the simultaneous phosphorimetric determination of pyrene and benzo[a]pyrene, two highly toxic polycyclic aromatic hydrocarbons, through excitation-emission phosphorescence matrices (EEPMs) and second-order calibration. The developed approach enabled us to determine both compounds at μg L⁻¹ concentration levels without the necessity of applying separation steps, as well as significantly reducing the experimental time. An artificial neural network (ANN) approach was applied to optimize the chemical variables which have an influence on the room-temperature phosphorescence emission of the studied analytes. The present study was employed for the discussion of the scopes of the applied second-order chemometric tools: parallel factor analysis (PARAFAC) and partial least-squares with residual bilinearization (PLS/RBL). The superior capability of PLS/RBL to model the profiles of other potentially interferent polycyclic aromatic hydrocarbons (PAHs) was demonstrated. The quality of the proposed method was established with the determination of both pyrene and benzo[a]pyrene in artificial and real water samples.     

Synthesis and NMR characterization of a dioxa-analog of benzo[a]pyrene: The 1-benzopyrano[6,5,4-mna]-xanthene (1,6-dioxabenzo[a]pyrene)

1,6-Dioxabenzo[a]pyrene, the first dioxa-analog of benzo[a]pyrene, was synthesized from 5-methoxy-1-naphthol in an eight-step reaction involving two peri-heterocyclizations.     

Evaluation of gas chromatography columns for the analysis of the 15 + 1 EU-priority polycyclic aromatic hydrocarbons (PAHs)

Three different stationary phases were investigated for the analysis of the 15 + 1 EU-priority polycyclic aromatic hydrocarbons (PAHs) by gas chromatography-mass spectrometry. In addition to the most commonly used 5% phenyl methylpolysiloxane, a mid-polar phase (50% phenyl methylpolysiloxane) and a recently commercialised mid-polar to polar phase (Optima® δ-6), were evaluated. Challenging groups of PAHs in terms of separation, such as the pair dibenz[a,h]anthracene-indeno[1,2,3,-cd]pyrene and the two groups benzo[b]fluoranthene-benzo[k]fluoranthene-benzo[j]fluoranthene and cyclopenta[cd]pyrene-benz[a]anthracene-chrysene, were satisfactorily separated by using the mid-polar phase. Moreover, discrimination in terms of peak height for the heaviest PAHs (caused from the strong interaction of these compounds with the stationary phase) was reduced without compromising the resolution of the other target analytes when applying the mid-polar phase in a tailor-made column geometry (20 m?×?0.18 mm internal diameter and 0.14 μm film thickness) in combination with optimised chromatographic conditions. A significant enhancement of the analytical sensitivity for dibenzopyrenes is demonstrated with an almost threefold increase of the signal-to-noise (S/N) ratio for dibenzo[a,h]pyrene, the last eluting PAH. The ability of the selected column to separate potentially interfering PAHs from the target analytes in both solvent solutions and food extracts is demonstrated.     

Detection and identification of carcinogen-peptide adducts by nanoelectrospray tandem mass spectrometry

Nanoelectrospray (nanoES) tandem mass spectrometry was used to examine covalently modified peptides in crude enzymatic digests of human serum albumin (HSA) that had been exposed to either benzo[a]pyrene diol epoxide (B[a]PDE, 1), chrysene diol epoxide (CDE, 2), 5-methylchrysene diol epoxide (5MeCDE, 3), or benzo[g]chrysene diol epoxide (B[g]CDE, 4). The low flow rates of nanoES (～20 nL/min) allowed several MS/MS experiments to be optimized and performed on a single sample with very little sample consumption (～30 min analysis time/µL sample). Initially, nanoES was compared with conventional LC/MS/MS analysis of carcinogen-peptide adducts. For example, nanoES analysis of an unseparated digest of B[a]PDE-treated serum albumin revealed the same peptides (RRHPY and RRHPY-FYAPE) that were previously shown, by LC/MS/MS, to be adducted with B[a]PDE. In addition, nanoES could detect unstable peptide adducts that might not otherwise have been directly observable. Finally, nanoES was shown to be an effective way to screen mixtures of modified and unmodified peptides for which no chromatographic information is available.     

Thermodynamic study of (anthracene + benzo[a]pyrene) solid mixtures

To characterize better the thermodynamic behavior of a binary polycyclic aromatic hydrocarbon mixture, thermochemical and vapor pressure experiments were used to examine the phase behavior of the {anthracene (1) + benzo[a]pyrene (2)} system. A solid–liquid phase diagram was mapped for the mixture. A eutectic point occurs at x₁ = 0.26. The eutectic mixture is an amorphous solid that lacks organized crystal structure and melts between T = (414 and 420) K. For mixtures that contain 0.10 < x₁ < 0.90, the enthalpy of fusion is dominated by that of the eutectic. (Solid + vapor) equilibrium studies show that mixtures of anthracene and benzo[a]pyrene at x₁ < 0.10 sublime at the vapor pressure of pure benzo[a]pyrene. These results suggest that the (solid + vapor) equilibrium of benzo[a]pyrene is not significantly influenced by moderate levels of anthracene in the crystal structure.