Aggregation‐Induced Emission‐Active 1,4‐Dihydropyridine‐Based Dual‐Phase Fluorescent Sensor with Multiple Functions

A N‐2‐phenylethyl‐substituted 1,4‐dihydropyridine derivative (NDHP) containing 5,5‐dimethylcyclohexane‐1,3‐dione and naphthylethylene was designed and synthesized. NDHP acts as a multifunctional fluorescent sensor in dual phases. The crystal structure analysis confirms that the NDHP molecules have highly twisted conformations. The twisted conformation results in aggregation‐induced emission properties and solid‐state emission, by restricting the intramolecular free rotation in the aggregated or solid state. In the solid state, NDHP exhibits reversible mechanochromic properties as a result of the transition between the amorphous and crystalline states. NDHP also exhibits a rare phenomenon of acid‐fumed solid‐state emission enhancement owing to the change in packing mode from a zigzag arrangement to J‐aggregation. The solid‐state stimuli‐responsive fluorescence switching is applied to realize a rewritable optical recording media and a multiple output combinational logic system. In solution, NDHP shows a selective fluorescence response for environmentally harmful Hg²⁺, with a limit of detection of 2.7 nm . This results from the “turn‐on” responsive behavior owing to the Hg²⁺‐triggered aggregation of the NDHP molecules. NDHP is also used in the imaging of intracellular Hg²⁺ in HeLa cells. These findings provide a feasible and attractive route for developing multifunctional fluorescent sensors for use in dual phases.     

Luminescence Color Tuning from Blue to Near Infrared of Stable Luminescent Solid Materials Based on Bis‐o‐Carborane‐Substituted Oligoacenes

Aryl‐substituted o ‐carboranes have shown highly efficient solid‐state emission in previous studies. To demonstrate color tuning of the solid‐state emission in an aryl‐o ‐carborane‐based system, bis‐o ‐carborane‐substituted oligoacenes were synthesized and their properties were systematically investigated. Optical and electrochemical measurements revealed efficient decreases in energy band gaps and lowest unoccupied molecular orbital (LUMO) levels by adding a number of fused benzene rings for the extension of π‐conjugation. As a consequence, bright solid‐state emission was observed in the region from blue to near infrared (NIR). Furthermore, various useful features were obtained from the modified o ‐carboranes as an optical material. The naphthalene derivatives exhibited aggregation‐induced emission (AIE) and almost 100 % quantum efficiency in the crystalline state. Furthermore, it was shown that the tetracene derivative with NIR‐emissive properties had high durability toward photo‐bleaching under UV irradiation.     

Solid‐State Structures and Solution Analyses of a Phenylpropylpyridine N‐Oxide and an N‐Methyl Phenylpropylpyridine

The crystal structures of phenylpropylpyridine‐N‐oxide and N‐methyl‐phenylpropylpyridinium iodide are compared, revealing that hydrogen bonding with the solvent molecule plays an important role in the N‐oxide compound, whilst electrostatic interactions are predominant in controlling the solid‐state orientation of the N‐methylated compound. Fluorescence spectroscopy and NOESY indicate that in contrast to the previously reported pyridinium iodide, the N‐oxide is not subject to intramolecular π‐stacking, as judged by excimer emission and a lack of corresponding cross peaks, respectively.     

Color Tuning of the Aggregation‐Induced Emission of Maleimide Dyes by Molecular Design and Morphology Control

Aggregation‐induced emission (AIE)‐active maleimide dyes, namely, 2‐p‐toluidino‐N‐p‐tolylmaleimide, 3‐phenyl‐2‐toluidino‐N‐p‐tolylmaleimide, 2‐p‐thiocresyl‐3‐p‐toluidino‐N‐p‐tolylmaleimide, and 2,3‐dithiocresyl‐N‐arylmaleimides, were synthesized by facile synthetic procedures. The dyes show intense emission in the solid state, and emission colors were controlled from green (λ_max=527 nm) to orange (λ_max=609 nm) by varying the substituents at the 2‐ and 3‐positions of the maleimide and the packing structures in the solid state. 2,3‐Disubstituted maleimide dyes effectively underwent redshifts of their emission wavelength. Furthermore, some of the dyes exhibited mechanochromism and polymorphism, and their emission properties were dramatically dependent on the morphology of the solid samples. The mechanisms of the emission behaviors were investigated by X‐ray diffraction. The substituent of the nitrogen atom of the maleimide ring affected the intermolecular interactions and short contacts, which were observed by single crystal X‐ray crystallography, to result in completely different emission properties.     

Efficient NIR‐Light Emission from Solid‐State Complexes of Boron Difluoride with 2′‐Hydroxychalcone Derivatives

This article describes a series of nine complexes of boron difluoride with 2′‐hydroxychacone derivatives. These dyes were synthesized very simply and exhibited intense NIR emission in the solid state. Complexation with boron was shown to impart very strong donor–acceptor character into the excited state of these dyes, which further shifted their emission towards the NIR region (up to 855 nm for dye 5 b , which contained the strongly donating triphenylamine group). Strikingly, these optical features were obtained for crystalline solids, which are characterized by high molecular order and tight packing, two features that are conventionally believed to be detrimental to luminescence in organic crystals. Remarkably, the emission of light from the π‐stacked molecules did not occur at the expense of the emission quantum yield. Indeed, in the case of pyrene‐containing dye 4 , for example, a fluorescence quantum yield of about 15 % with a fluorescence emission maximum at 755 nm were obtained in the solid state. Moreover, dye 3 a and acetonaphthone‐based compounds 1 b , 2 b , and 3 b showed no evidence of degradation as solutions in CH₂Cl₂ that contained EtOH. In particular, solutions of brightly fluorescent compound 3 a (brightness: ε×Φ_f=45 000 M ^?1 cm^?1) could be stored for long periods without any detectable changes in its optical properties. All together, these new dyes possess a set of very interesting properties that make them promising solid‐state NIR fluorophores for applications in materials science.     

N‐Boc‐Indolylbenzothiadiazole Derivatives: Efficient Full‐Color Solid‐State Fluorescence and Self‐Recovering Mechanochromic Luminescence

Herein, the solid‐state emission with good fluorescence quantum yields of N‐Boc‐indolylbenzothiadiazoles as a new class of fluorophores is described. Their solid‐state emission covers the wide range of the visible spectrum and the emission color can be tuned easily by changing the substituents on the two heteroaromatic rings. Among these, 3‐methylindolyl derivatives exhibit moreover autonomously self‐recovering mechanochromic luminescence, whereby the original solid‐state emission could be recovered spontaneously at room temperature after exposure to a mechanical stimulus. The emission color, as well as the recovery time for the color change could be tuned via the introduction of different substituents on the benzothiadiazole ring. We propose that the mechanism of the autonomously self‐recovering mechanochromic luminescence of 3‐methylindolylbenzothiadiazoles is based on a partial amorphization of the crystals upon exposure to the mechanical stimulus, followed by autonomous recovering in the form of recrystallization.     

Carborane‐Induced Excimer Emission of Severely Twisted Bis‐o‐Carboranyl Chrysene

The synthesis of a highly twisted chrysene derivative incorporating two electron deficient o‐carboranyl groups is reported. The molecule exhibits a complex, excitation‐dependent photoluminescence, including aggregation‐induced emission (AIE) with good quantum efficiency and an exceptionally long singlet excited state lifetime. Through a combination of detailed optical studies and theoretical calculations, the excited state species are identified, including an unusual excimer induced by the presence of o‐carborane. This is the first time that o‐carborane has been shown to induce excimer formation ab initio, as well as the first observation of excimer emission by a chrysene‐based small molecule in solution. Bis‐o‐carboranyl chrysene is thus an initial member of a new family of o‐carboranyl phenacenes exhibiting a novel architecture for highly‐efficient multi‐luminescent fluorophores.     

A Red to Near‐IR Fluorogen: Aggregation‐Induced Emission,Large Stokes Shift,High Solid Efficiency and Application in Cell‐Imaging

A tetraphenylethene (TPE) derivative modified with the strong electron acceptor 2‐dicyano‐methylene‐3‐cyano‐4,5,5‐trimethyl‐2,5‐dihydrofuran (TCF) was obtained in high yield by a simple two‐step reaction. The resultant TPE‐TCF showed evident aggregation‐induced emission (AIE) features and pronounced solvatochromic behavior. Changing the solvent from apolar cyclohexane to highly polar acetonitrile, the emission peak shifted from 560 to 680 nm (120 nm redshift). In an acetonitrile solution and in the solid powder, the Stokes shifts are as large as 230 and 190 nm, respectively. The solid film emits red to near‐IR (red‐NIR) fluorescence with an emission peak at 670 nm and a quantum efficiency of 24.8 %. Taking the advantages of red‐NIR emission and high efficiency, nanoparticles (NPs) of TPE‐TCF were fabricated by using tat‐modified 1,2‐distearoylsn‐glycero‐3‐phosphor‐ethanol‐amine‐N‐[methoxy‐(polyethyl‐eneglycol)‐2000] as the encapsulation matrix. The obtained NPs showed perfect membrane penetrability and high fluorescent imaging quality of cell cytoplasm. Upon co‐incubation with 4,6‐diamidino‐2‐phenylindole (DAPI) in the presence of tritons, the capsulated TPE‐TCF nanoparticles could enter into the nucleus and displayed similar staining properties to those of DAPI.     

Solid‐State Emission of the Anthracene‐o‐Carborane Dyad from the Twisted‐Intramolecular Charge Transfer in the Crystalline State

The emission process of the o ‐carborane dyad with anthracene originating from the twisted intramolecular charge transfer (TICT) state in the crystalline state is described. The anthracene‐o ‐carborane dyad was synthesized and its optical properties were investigated. Initially, the dyad had aggregation‐ and crystallization‐induced emission enhancement (AIEE and CIEE) properties via the intramolecular charge transfer (ICT) state. Interestingly, the dyad presented the dual‐emissions assigned to both locally excited (LE) and ICT states in solution. From the mechanistic studies and computer calculations, it was indicated that the emission band from the ICT should be attributable to the TICT emission. Surprisingly, even in the crystalline state, the TICT emission was observed. It was proposed from that the compact sphere shape of o ‐carborane would allow for rotation even in the condensed state.     

Design of Thermochromic Luminescent Dyes Based on the Bis(ortho‐carborane)‐Substituted Benzobithiophene Structure

To obtain solid‐state emissive materials having stimuli‐responsive luminescent chromic properties without phase transition, benzobithiophenes modified with two o‐carborane units having various substituents in the adjacent phenyl ring in o‐carborane were designed and synthesized. Their emission colors were strongly affected not only by the substituents at the para‐position of the phenyl ring but also by molecular distribution in the solid state. In particular, the emission colors were changed by heating without crystal phase transition. It was proposed that their thermochromic properties were correlated not with isomerization but with the molecular motion at the distorted benzobithiophene moiety.     

Recent Progress in the Development of Solid‐State Luminescent o‐Carboranes with Stimuli Responsivity

o‐Carborane, a cluster compound containing boron and adjacent carbon atoms, displays intriguing luminescent properties. Recently, compounds containing o‐carborane units were found to show suppressed aggregation‐induced quenching and intense solid‐state emission; they also show potential for the development of stimuli‐responsive luminochromic materials. In this Minireview, we introduce three kinds of fundamental photochemical properties: aggregation‐induced emission, twisted intramolecular charge transfer in crystals, and environment‐sensitive excimer formation in solids. Based on these properties, several types of luminochromism, such as thermos‐, vapo‐, and mechanochromism, have been discovered. Based mainly on results from recent studies, we illustrate these mechanisms as well as unique luminescent behaviors of o‐carborane derivatives.     

Crystallization‐Induced Reversal from Dark to Bright Excited States for Construction of Solid‐Emission‐Tunable Squaraines

Squaraines (SQs) with tunable emission in the solid state is of great importance for various demands; however a remaining challenge is emission quenching upon aggregation. Herein, a unique SQ, named as CIEE‐SQ, is designed to exhibit strong emission in crystal, undergoing crystallization‐induced reverse from dark ¹(n+σ,π*) to bright ¹(π,π*) excited states. Such an excited state of CIEE‐SQ can be subtly tuned by molecular conformation changes during the unexpected temperature‐triggered single‐crystal to single‐crystal (SCSC) reversible transformation. Furthermore, co‐crystallization between CIEE‐SQ and chloroform largely stabilize the ¹(π,π*) state, enhancing the transition dipole moment and decreasing the reorganization energy to boost the fluorescence, which is promising in data encryption and decryption.     

Stacking‐Induced Diamagnetic/Paramagnetic Conversion of Imidazo[1,2‐a]pyridin‐2(3 H)‐one Derivatives: Near‐Infrared Absorption and Magnetic Properties in the Solid State

Herein, we present three imidazo[1,2‐a]pyridin‐2(3 H)‐one derivatives that are diamagnetic in solution, but paramagnetic in the solid state, possibly owing to a stacking‐induced formation of phenoxide‐type radicals. Notably, a larger bathochromic shift of the absorption (even up to the near‐ infrared region) of these three compounds was observed in the solid state than in solution, which was attributable to the ordered columnar stacking arrangements or their single‐electron character as radicals in the solid state. Interestingly, compared to that in solution, (E)‐3‐(pyridin‐4′‐ylmethylene)imidazo[1,2‐a]pyridine 2(3 H)‐one displayed a largely red‐shifted emission (centered at 660 nm, with tailing above 800 nm) in the solid state. A larger bathochromic shift (260 nm) of the emission is an indication of better order and tight stacking in the solid state, which is brought about by the rigid and polar acceptor. These three compounds also reveal different magnetic susceptibilities at 300 K, thus implying that they possess various columnar stacking structures. Most interestingly, these three radicals exhibit unusual ferromagnetic‐to‐antiferromagnetic phase transitions, which can be attributed to anisotropic contraction and non‐uniform slippage of the columnar stacking chains.     

Non‐Innocent Ligand Effects on Low‐Oxidation‐State Indium Complexes

Attempts to coordinate neutral ligands to low oxidation state indium centers are often hindered by disproportionation pathways that produce elemental indium and higher oxidation state species. In contrast, we find that reactions of the salt, InOTf (OTf=trifluoromethanesulfonate), with α‐diimine ligands yielded intensely colored compounds with no evidence of decomposition. X‐ray structural analysis of InOTf ? ^MesDAB^Me (^MesDAB^Me=N,N‐dimesityl‐2,3‐dimethyl‐diazabutadiene; 1 ) reveals a discrete molecular compound with a pyramidal coordination environment at the indium center, consistent with the presence of a stereochemically active lone pair of electrons on indium and a neutral diazabutadiene chelate ligand. The use of the less‐electron‐rich ^MesDAB^H ligand (^MesDAB^H=N,N‐dimesityl‐diazabutadiene) engenders dramatically different reactivity and produces a metallopolymer (InOTf ? ^MesDAB^H)_∞ ( 2 ) linked via C? C and In? In bonds. The difference in reactivity is rationalized by cyclic voltammetry and DFT studies that suggest more facile electron transfer from In^I to the ^MesDAB^H and bis(aryl)acenaphthenequinonediimine (BIAN) ligands. Solution EPR spectroscopy indicates the presence of non‐interacting ligand‐based radicals in solution, whereas solid‐state EPR studies reflect the presence of a thermally accessible spin triplet consistent with reversible C? C bond cleavage.     

Tunable Trimers: Using Temperature and Pressure to Control Luminescent Emission in Gold(I) Pyrazolate‐Based Trimers

A systematic investigation into the relationship between the solid‐state luminescence and the intermolecular Au???Au interactions in a series of pyrazolate‐based gold(I) trimers; tris(μ₂‐pyrazolato‐N,N′)‐tri‐gold(I) ( 1 ), tris(μ₂‐3,4,5‐ trimethylpyrazolato‐N,N′)‐tri‐gold(I) ( 2 ), tris(μ₂‐3‐methyl‐5‐phenylpyrazolato‐N,N′)‐tri‐gold(I) ( 3 ) and tris(μ₂‐3,5‐diphenylpyrazolato‐N,N′)‐tri‐gold(I) ( 4 ) has been carried out using variable temperature and high pressure X‐ray crystallography, solid‐state emission spectroscopy, Raman spectroscopy and computational techniques. Single‐crystal X‐ray studies show that there is a significant reduction in the intertrimer Au???Au distances both with decreasing temperature and increasing pressure. In the four complexes, the reduction in temperature from 293 to 100 K is accompanied by a reduction in the shortest intermolecular Au???Au contacts of between 0.04 and 0.08 Å. The solid‐state luminescent emission spectra of 1 and 2 display a red shift with decreasing temperature or increasing pressure. Compound 3 does not emit under ambient conditions but displays increasingly red‐shifted luminescence upon cooling or compression. Compound 4 remains emissionless, consistent with the absence of intermolecular Au???Au interactions. The largest pressure induced shift in emission is observed in 2 with a red shift of approximately 630 cm^?1 per GPa between ambient and 3.80 GPa. The shifts in all the complexes can be correlated with changes in Au???Au distance observed by diffraction.     

A One‐pot,Four‐component Protocol for the Synthesis of 2‐Aroylimino‐3‐aryl‐4‐methyl‐5‐acetyl‐1,3‐thiazolines

A concise and efficient route for the synthesis of new 2‐aroylimino‐3‐aryl‐4‐methyl‐5‐acetyl‐1,3‐thiazolines in good to excellent yields is described. This involves the one‐pot, four‐component reaction of suitable aroyl chlorides, potassium thiocyanate, anilines, and 3‐chloropentane‐2,4‐dione in the presence of N‐methylimidazole.     

Synthesis of novel fused tricyclic quinolones: 4a,5‐Dihydro‐1H‐[1;2,4]triazino[1,6‐a]quinoline‐2,4,6(3H)‐triones

A versatile methodology to build the 1H‐[1,2,4]triazino[1,6‐a]quinoline‐2,4,6(3H)‐trione structure from methyl 6‐fluoro4‐oxo‐1,4‐dihydro‐2‐quinolinecarboxylate was developed. The method involves an N‐ami‐nation followed by condensation of an aroyl isocyanate to form an alpha semicarbazidocarboxylate that readily cyclizes to the fused [1,2,4]triazino ring under ammonia/ethanol condition. Also, the reactivity of the [1,2,4]triazino ring thus obtained was studied.     

ortho‐Phenylene‐Bridged Cyclic Oligopyrroles: Conformational Flexibilities and Optical Properties

ortho‐Phenylene‐bridged cyclic trimeric oligopyrrole C3 and hexameric oligopyrrole C6 were synthesized by Suzuki–Miyaura coupling reactions. The twisted structures of C3 and C6 were unambiguously revealed by X‐ray diffraction analysis. The optical properties of these cyclic oligopyrroles were compared with linear oligopyrrole L3 and cyclic tetramer C4 . The cyclic oligopyrroles exhibited large Stokes shifts and blue fluorescence with high quantum yields in solution and in the solid state. In addition, selective N‐methylation and N‐tolylation of C3 were used to tune the optical and electrochemical properties by changing the molecular twists and conformational flexibilities. Throughout these studies, the structure–property relationship of these cyclic strained oligopyrroles has been illustrated as an interesting molecular motif for novel cyclic π‐conjugated systems.     

2,5‐Difluorenyl‐Substituted Siloles for the Fabrication of High‐Performance Yellow Organic Light‐Emitting Diodes

2,3,4,5‐Tetraarylsiloles are a class of important luminogenic materials with efficient solid‐state emission and excellent electron‐transport capacity. However, those exhibiting outstanding electroluminescence properties are still rare. In this work, bulky 9,9‐dimethylfluorenyl, 9,9‐diphenylfluorenyl, and 9,9′‐spirobifluorenyl substituents were introduced into the 2,5‐positions of silole rings. The resulting 2,5‐difluorenyl‐substituted siloles are thermally stable and have low‐lying LUMO energy levels. Crystallographic analysis revealed that intramolecular π–π interactions are prone to form between 9,9′‐spirobifluorene units and phenyl rings at the 3,4‐positions of the silole ring. In the solution state, these new siloles show weak blue and green emission bands, arising from the fluorenyl groups and silole rings with a certain extension of π conjugation, respectively. With increasing substituent volume, intramolecular rotation is decreased, and thus the emissions of the present siloles gradually improved and they showed higher fluorescence quantum yields (Φ_F=2.5–5.4 %) than 2,3,4,5‐tetraphenylsiloles. They are highly emissive in solid films, with dominant green to yellow emissions and good solid‐state Φ_F values (75–88 %). Efficient organic light‐emitting diodes were fabricated by adopting them as host emitters and gave high luminance, current efficiency, and power efficiency of up to 44 100 cd m^?2, 18.3 cd A^?1, and 15.7 lm W^?1, respectively. Notably, a maximum external quantum efficiency of 5.5 % was achieved in an optimized device.     

Electron‐Deficient Tetrabenzo‐Fused Pyracylene and Conversions into Curved and Planar π‐Systems Having Distinct Emission Behaviors

Polycyclic aromatic compounds containing fully unsaturated five‐membered ring(s) have been intensively studied because of their unique properties, which include high electron affinity and reactivity. Reported herein is an efficient route for the synthesis of tetrabenzo‐fused pyracylene, which comprises pyracylene and tetracene segments, using intramolecular oxidative C? H coupling. It was shown to possess high electron affinity and was found to undergo addition reactions with n‐butyllithium or benzyne. These reactions led to either a 1,4‐addition compound or triptycene‐type adduct with a curved or planar π‐system, respectively. Although these compounds exhibited similar sky‐blue emissions in a dilute solution, the emission band of the 1,4‐addition compound was significantly red‐shifted in the solid state and exhibited intense yellow emission attributable to the excimer, while the triptycene‐type adduct retained the intense blue color emission in the solid state.