Combination of Single Bead FTIR and Chemometrics in Combinatorial Chemistry: Application of the Multivariate Calibration Method in Monitoring Solid-Phase Organic Synthesis

The single bead FTIR method has been used in quantitative analyses of solid-phase organic synthesis (SPOS) such as the determination of reaction kinetics and conversion yield. These studies rely on data analysis methods to extract quantitative information from IR spectra. However, the IR spectrum of a solid-phase sample contains vibrational bands from the starting material, product, and the polymer support itself. The coexistence of multiple chemical components causes severe spectral overlaps and sometimes makes quantitative analysis extremely difficult. In some cases, it is impossible to extract qualitative and quantitative information from overlapped IR spectra. In this paper, we use partial least squares (PLS), a chemometrics method, to achieve qualitative and quantitative analysis of samples that generate severely overlapped IR spectra. The primary loading factor obtained from a PLS calculation only displays those spectral features that have undergone changes during a SPOS reaction. Disappearing and emerging organic functional groups generate negative and positive signals, respectively, in the primary loading factor, thus allowing qualitative analysis of the reaction with improved precision. The scores of the primary loading factors of spectra taken at various times during a reaction provide quantitative information allowing the study of the reaction kinetics directly on solid support. On the basis of the analysis of three diverse SPOS reactions, the PLS method has demonstrated the unique capability of extracting quantitative and qualitative information from the overlapped IR spectra. It is a powerful data analysis tool for the monitoring of SPOS reactions in combinatorial chemistry.     

Colorimetric tools for solid-phase organic synthesis

One of the unresolved problems of solid-phase organic synthesis (SPOS) is the availability of general and rapid methods to monitor the transformation of functional groups present in molecules supported on insoluble supports. Color tests, far from providing the ultimate solution, may help in detection (and sometimes in quantification) of different functional groups. In this short review, we have collected most of the methods available and applied in SPOS with an Experimental Section that describes the procedure we have successfully applied to bead analyses in our laboratories.     

Synthesis of γ-Substituted Alcohol with Polymer-bound Amide

With solid phase organic synthesis method(SPOS), polymer-bound N-enoylprolinol(4) was prepared by the attachment of N-enoylprolinol(3) to Merrifield resin and was used for asymmetric Michael additions for the first time. The enantiomeric excess obtained by this method is increased as compared with that obtained by the corresponding solution phase reactions.     

Synthesis of γ-Substituted Alcohol with Polymer-bound Amide

With solid phase organic synthesis method(SPOS), polymer-bound N-enoylprolinol(4) was prepared by the attachment of N-enoylprolinol(3) to Merrifield resin and was used for asymmetric Michael additions for the first time. The enantiomeric excess obtained by this method is increased as compared with that obtained by the corresponding solution phase reactions.     

Diversity-oriented synthesis and solid-phase organic synthesis under controlled microwave heating

Diversity-oriented organic synthesis (DOS) and solid-phase organic synthesis (SPOS) are proven technologies for generating small molecule libraries for chemical genetics studies. Integration of controlled microwave heating with DOS and SPOS not only speeds up the library preparation process but also offers unique opportunities in tackling issues which are hardly addressed by thermal heating. Microwave-assisted synthesis is illustrated for (a) highly regioselective Wittig olefination of cycloalkanones by accurate regulation of temperature; (b) tandem Wittig-IMDA sequence toward stereochemical diversity of gamma-butyrolactones; (c) one-pot alkylation-amidation approach toward appendage diversity through use of building blocks; and (d) one-pot U-4CR-annulation strategy toward skeletal diversity via careful reaction design. Microwave-assisted solid-phase organic synthesis (MASPOS) is highlighted by incorporating with split-pool combinatorial synthesis (SPCS) of indole sulfonamides via a key on-resin Cu(II)- or Pd(II)-catalyzed heteroannulation under microwave heating. Design and fabrication of a novel diglycine-derived catlinker are described and its role in facilitating on-resin reaction is evaluated. A traceless synthesis of indole sulfonamides via microwave-assisted Cu(II)-catalyzed heteroannulation of the catlinker-tethered substrates is also given.     

Polytetrahydrofuran cross-linked polystyrene resins for solid-phase organic synthesis

Currently, divinylbenzene cross-linked polystyrene (DVB-PS) is the polymer of choice for use in solid-phase organic synthesis (SPOS). While much research has been directed toward the optimization of linker groups for the attachment of compounds to the polymer, the development of new polymers themselves has been relatively neglected. In an attempt to overcome the shortcomings of DVB-PS and to develop new polymers with optimum properties for use in organic synthesis, we have prepared a series of polystyrene polymers that incorporate flexible polytetrahydrofuran (PTHF) based cross-linkers. The objective of incorporating PTHF into the polymers was to slightly increase the overall polarity of the polymer and thus render the resins more organic solvent-like. Since the degree to which a resin swells in and absorbs a particular solvent correlates to how well substrates attached to the polymer are solvated, we compared the swelling of our new resins to commercially available DVB-PS resins. In all cases, we found that our resins swelled to a much greater extent than do DVB-PS resins, and their use should therefore allow for SPOS reaction conditions that more closely mimic homogeneous solution-phase conditions. It was also found that the PTHF chain length of the cross-linker does not affect the level of swelling since all of our cross-linkers afford resins with comparable levels of increased swelling. Furthermore, we have examined the utility of our resins in directed ortho-metalation reactions and found that the increased swelling of our resins allows for isolation of reaction products in yields comparable to what is achieved using standard solution-phase conditions.     

2beta-(N-substituted piperazino)-5alpha-androstane-3alpha,17beta-diols: parallel solid-phase synthesis and antiproliferative activity on human leukemia HL-60 cells

Leukemia is the most common cancer affecting children. A steroid possessing a methylpiperazine nucleus was recently reported to inhibit the proliferation of HL-60 leukemia cells. To speed up the development of this promising potential new drug, we generated libraries of analogues using parallel solid-phase organic synthesis (SPOS). A 6-step sequence of reactions, starting from dihydrotestosterone, afforded a steroidal 2,3alpha-epoxide, which was selectively opened to give, after N-Fmoc protection, a diol with suitable stereochemistry. The difference of reactivity between 3alpha-OH and 17beta-OH was then used to allow the regioselective coupling of 17beta-OH to chloro-activated butyldiethylsilane polystyrene. We next generated three libraries of 2beta-piperazinyl-5alpha-androstane-3alpha,17beta-diol N-derivatives with 1, 2, or 3 levels of molecular diversity in acceptable yields and purities for our biological screening assay. Several members of these libraries were more potent than the lead compound, especially five members with a proline as the first level of diversity and a cyclohexylcarbonyl, methylbutyryl, cyclohexylacetyl, cyclopentylpropionyl, or hexanoyl as the second level of diversity. They efficiently inhibited HL-60 cell proliferation with IC50 values of 0.58, 0.66, 1.78, 1.98, and 2.57 microM, respectively. The present work demonstrates the potential of our SPOS approach for the optimization of a new class of cytotoxic agents.     

Soluble Polymer-Supported Synthesis of α-Amino Acid Derivatives

Due to the central role played by α-amino acid in chemistry and biology, the development of versatile and new methodology for the synthesis of natural and unnatural α-amino acid has emerged as an important and challenging synthetic endeavour for organic chemists.[1] Among the various methodologies reported for α-amino acid synthesis, [2,3] the solid-phase organic synthesis (SPOS) has served as an important approach. [4] However, inherent prob lems on solid supports are reactive site accessibility, site-site interaction and monitoring of the reaction.     

Solid-phase synthesis of benzimidazole libraries biased for RNA targets

An efficient and highly versatile synthesis of two libraries 1(x,y) and 2-Ar(x,y,z) or 2-R²(x,y,w) based on the privileged benzimidazole scaffold is described. Our design is aimed at obtaining molecules, biased for binding to RNA targets, by incorporating functionalities, which are frequently found in natural RNA-ligands. The library construction was realized with the use of SPOS in high average yields and purity. Monitoring and quantitation of intermediates and final products were performed by the use of NMR spectroscopy using DMFu as an internal standard.     

Quantitative Determination of Resin Loading in Solid-Phase Organic Synthesis Using (13)C MAS NMR

The use of quantitative carbon nuclear magnetic resonance spectroscopy ((13)C NMR) for the determination of resin loadings has been investigated. Magic angle spinning (MAS) NMR spectra have been obtained for solvent-swollen resins on a conventional 7 mm CP/MAS probe using the two pulse phase modulation (TPPM) proton decoupling sequence. Loadings of resin-bound organic compounds were evaluated via addition of tetrakis(trimethylsilyl)silane as reference or using the carbon resonances of the polymeric resin material as an internal standard. Results for several functionalized Wang and trityl resins are consistent with those obtained using well-established analytical methods. The (13)C NMR method has interesting applications in the field of solid-phase organic synthesis (SPOS), since no functional group acting as a support for the attachment of a quantifiable chromophore must be available in the material of interest.     

Synthesis and application of polytetrahydrofuran-grafted polystyrene (PS-PTHF) resin supports for organic synthesis

Cross-linked polystyrene (PS) with polytetrahydrofuran (PTHF) chains were prepared for use in solid phase organic synthesis (SPOS). The resins were prepared from styrene, styrene-PTHF macromonomers and cross-linkers 1,4-bis[4-vinylphenoxy]butane or divinylbenzene by suspension polymerization. The styrene-PTHF macromonomers were prepared by cationic polymerization of 4-vinylbenzyl bromide and 4-(4-vinylphenoxy)butyl iodide activated by silver hexafluoroantimonate and 4-(5-hydroxypentyl)styrene activated by triflic anhydride. Alternatively, polytetrahydrofuran-grafted polystyrene (PS-PTHF) resins could also be directly prepared from 5-hydroxypentyl JandaJel by cationic polymerization using triflic anhydride as the initiator. These PS-PTHF resins exhibited good swelling characteristics across a wide spectrum of polar and non-polar solvents. These resins were used in the synthesis of 3-methyl-1-phenyl-2-pyrazolin-5-one, which requires β-ketoester formation at low temperature (−78 °C), resulting in good yield and product purity; whereas the same synthesis carried out on PEG-grafted PS (PS-PEG) resin resulted in incomplete synthesis.     

Development of a Novel, Oxidatively Activated, Safety-Catch Linker for Solid-Phase Asymmetric Organic Synthesis (SPOS)

Solid-phase asymmetric organic synthesis has become a very important synthetic strategy within the organic chemistry community.[1] Critical to success in SPOS is a linking strategy which allows both the substrate to be loaded and the product released efficiently from the polymeric support. A safety catch linker[2] (SCL) is in principle a linking molecule orthogonal to the reaction conditions of the library synthesis, which can be easily activated by a simple chemical transformation to allow efficient cleavage of the products from the polymer under mild conditions. In order to introduce the SuperQuat chiral auxiliaries[3] for SOPS, we report herein design and synthesis of a novel safety catch linker for asymmetric conjugate addition reactions.     

Liquid‐Phase Synthesis of 2′‐Methyl‐RNA on a Homostar Support through Organic‐Solvent Nanofiltration

Due to the discovery of RNAi, oligonucleotides (oligos) have re‐emerged as a major pharmaceutical target that may soon be required in ton quantities. However, it is questionable whether solid‐phase oligo synthesis (SPOS) methods can provide a scalable synthesis. Liquid‐phase oligo synthesis (LPOS) is intrinsically scalable and amenable to standard industrial batch synthesis techniques. However, most reported LPOS strategies rely upon at least one precipitation per chain extension cycle to separate the growing oligonucleotide from reaction debris. Precipitation can be difficult to develop and control on an industrial scale and, because many precipitations would be required to prepare a therapeutic oligonucleotide, we contend that this approach is not viable for large‐scale industrial preparation. We are developing an LPOS synthetic strategy for 2′‐methyl RNA phosphorothioate that is more amenable to standard batch production techniques, using organic solvent nanofiltration (OSN) as the critical scalable separation technology. We report the first LPOS‐OSN preparation of a 2′‐Me RNA phosphorothioate 9‐mer, using commercial phosphoramidite monomers, and monitoring all reactions by HPLC, ³¹P NMR spectroscopy and MS.     

Synthesis of polymeric supports with spacer-modified triazene linkers: aldol and Grignard reactions of immobilized nortropinone

Four new polymeric supports with 3- and 6-carbon atom spacers and triazene linkers derived from meta- and para-aminophenol were synthesized from commercial Merrifield polymer. The supports could be used for immobilization of secondary amines in SPOS. A new strategy based on the use of diethylamine triazenes as masked precursors for the generation of polymer-supported diazonium ions was used. The performance of the new linkers was tested on Grignard and aldol reactions of solid-phase immobilized nortropinone. The new supports with C₃-T2 linkers gave products with better yields and purities than the classical T2 supports or the supports with the C₆-T2 linkers.     

Tuning the parameters of the suspension polymerization of styrene,divinylbenzene, and N‐(p‐vinylbenzyl)‐ 4,4‐dimethylazlactone

Azlactone‐functionalized microporous polystyrene resins were synthesized by suspension polymerization of styrene, divinylbenzene and N‐(p‐vinylbenzyl)‐4,4‐dimethylazlactone (VBM). A fractional factorial design of experiments (DOE) has been used to evaluate the influence of several parameters (factors) on the physical and chemical properties (responses) of the resins. Six factors were considered: (i) the organic/aqueous phase ratio, (ii) the amount of the functional monomer N‐(p‐vinylbenzyl)‐4,4‐dimethylazlactone, (iii) the amount of stabilizer, (iv) the amount of initiator, (v) the stirring speed, and (vi) the equilibration time. The process responses were the yield of polymerization, the diameter of the beads and their polydispersity, their swelling ratio in dichloromethane and the accessibility ratio of the immobilized azlactone sites. This methodology enables the determination of an optimal combination of the six factors to synthesize beads in high yield (92%) with remarkable properties for SPOS applications (azlactone sites loading = 1.57 mmol/g, swelling ratio in dichloromethane = 5.0 mL/g and 100% accessibility ratio). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3677–3686, 2007     

Determination of leakage from antibody adsorbent: composition analysis and pH effect

To study the leakage at different solution pH values, IgG Sepharose 6FF®, a commercially available immunoadsorbent, was used as a model. The leaked substance consists of three parts: (1) ligands and its fragments; (2) ligands plus matrix fragments in which ligands are chemically attached to the adsorbent matrix; and (3) matrix fragments. Buffer solution pH values had a great effect on both the kinetics and the amount of ligand leakage. Cross‐linking of the adsorbent matrix could reduce both matrix leakage and antibody leakage at pH 3.0, but its effect was limited at pH 11.0 for ligand leakage. Copyright © 2013 John Wiley & Sons, Ltd.     

Fabrication and characterization of a rigid magnetic matrix for protein adsorption

This article describes the fabrication and characterization of a novel magnetic poly(glycidyl methacrylate-triallyl isocyanurate-divinylbenzene) matrix containing magnetite colloids. The results showed that the matrix was superparamagnetic and could be separated magnetically from a suspension in a few seconds. Protein adsorption properties of diethylamine-derivatized matrix were characterized with bovine serum albumin (BSA) as a model protein. The static capacity determined by batch adsorption was 79 mg/ml wet matrix. Kinetic study gave an effective diffusivity of BSA of 5.0 x 10(-13) m2/s in the matrix at an initial BSA concentration in the liquid phase of 1.0 mg/ml. Stability of the matrix was confirmed by recycling of the matrix in protein adsorptions.     

Determination of total dissolved phosphorus in water samples by axial inductively coupled plasma atomic emission spectrometry

A procedure was developed to determine total dissolved phosphorus in groundwater-like samples using axial ICP-AES. Severe and peculiar matrix effects (strongly positive at lower and leveling off at higher matrix concentrations) in the presence of Na and Ca were observed. To reduce these matrix effects, a double approach was utilized consisting of a so-called minimum matrix in combination with an internal standard (Ga in this case). The ‘minimum matrix’ (small amounts of K, Mg and Na) was only added to the standard solution(s) used for the calibration. The detection limit for the whole procedure was 12 μg/L using the P213 nm line. Residual matrix effects were less than 3% (P213 nm line). Received: 21 February 1997 / Revised: 5 June 1997 / Accepted: 6 June 1997     

熔融碳酸盐燃料电池水溶性隔膜的制备和性能

用水溶性粘结剂聚乙烯醇(PVA)和α-LiAlO2粉料等制备熔融碳酸盐燃料电池水溶性隔膜(PVA隔膜).粉料的水合作用导致PVA隔膜的孔隙率和热失重均比PVB(聚乙烯醇缩丁醛)隔膜的大,但前者的最大孔径却比后者的小.当反应气压为0.9MPa,反应气体利用率为20%,分别于300和428.57mA·cm-2下放电时,PVA隔膜电池输出电压分别为0.849和0.739V;输出功率密度分别为254.7和316.7mW·cm-2,高于PVB隔膜电池的.经10次热循环启动,电池性能出现下降—回升—稳定的变化.这可能是PVA隔膜高温失水引起隔膜电导变化所致.     

Determination of total dissolved phosphorus in water samples by axial inductively coupled plasma atomic emission spectrometry

A procedure was developed to determine total dissolved phosphorus in groundwater-like samples using axial ICP-AES. Severe and peculiar matrix effects (strongly positive at lower and leveling off at higher matrix concentrations) in the presence of Na and Ca were observed. To reduce these matrix effects, a double approach was utilized consisting of a so-called minimum matrix in combination with an internal standard (Ga in this case). The ‘minimum matrix’ (small amounts of K, Mg and Na) was only added to the standard solution(s) used for the calibration. The detection limit for the whole procedure was 12 μg/L using the P213 nm line. Residual matrix effects were less than 3% (P213 nm line). Received: 21 February 1997 / Revised: 5 June 1997 / Accepted: 6 June 1997