Modern MALDI time‐of‐flight mass spectrometry

This paper focuses on development of time‐of‐flight (TOF) mass spectrometry in response to the invention of matrix‐assisted laser desorption/ionization (MALDI). Before this breakthrough ionization technique for nonvolatile molecules, TOF was generally considered as a useful tool for exotic studies of ion properties but was not widely applied to analytical problems. Improved TOF instruments and software that allow the full potential power of MALDI to be applied to difficult biological applications are described. A theoretical approach to the design and optimization of MALDI‐TOF instruments for particular applications is presented. Experimental data are provided that are in excellent agreement with theoretical predictions of resolving power and mass accuracy. Data on sensitivity and dynamic range using kilohertz laser rates are also summarized. These results indicate that combinations of high‐performance MALDI‐TOF and TOF‐TOF with off‐line high‐capacity separations may ultimately provide throughput and dynamic range several orders of magnitude greater than those currently available with electrospray LC‐MS and MS‐MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Gas‐phase fragmentation reactions of protonated benzofuran‐ and dihydrobenzofuran‐type neolignans investigated by accurate‐mass electrospray ionization tandem mass spectrometry

We have investigated gas‐phase fragmentation reactions of protonated benzofuran neolignans (BNs) and dihydrobenzofuran neolignans (DBNs) by accurate‐mass electrospray ionization tandem and multiple‐stage (MSⁿ) mass spectrometry combined with thermochemical data estimated by Computational Chemistry. Most of the protonated compounds fragment into product ions B ([M + H–MeOH]⁺), C ([ B –MeOH]⁺), D ([ C –CO]⁺), and E ([ D –CO]⁺) upon collision‐induced dissociation (CID). However, we identified a series of diagnostic ions and associated them with specific structural features. In the case of compounds displaying an acetoxy group at C‐4, product ion C produces diagnostic ions K ([ C –C₂H₂O]⁺), L ([ K –CO]⁺), and P ([ L –CO]⁺). Formation of product ions H ([ D –H₂O]⁺) and M ([ H –CO]⁺) is associated with the hydroxyl group at C‐3 and C‐3′, whereas product ions N ([ D –MeOH]⁺) and O ([ N –MeOH]⁺) indicate a methoxyl group at the same positions. Finally, product ions F ([ A –C₂H₂O]⁺), Q ([ A –C₃H₆O₂]⁺), I ([ A –C₆H₆O]⁺), and J ([ I –MeOH]⁺) for DBNs and product ion G ([ B –C₂H₂O]⁺) for BNs diagnose a saturated bond between C‐7′ and C‐8′. We used these structure‐fragmentation relationships in combination with deuterium exchange experiments, MSⁿ data, and Computational Chemistry to elucidate the gas‐phase fragmentation pathways of these compounds. These results could help to elucidate DBN and BN metabolites in in vivo and in vitro studies on the basis of electrospray ionization ESI‐CID‐MS/MS data only.     

A small high‐irradiance laser ionization time‐of‐flight mass spectrometer

A small high‐irradiance laser ionization time‐of‐flight mass spectrometer (LI‐TOFMS) with orthogonal sample introduction was described. High irradiance of 6 × 10¹⁰ W/cm² at 532 nm from a Nd : YAG laser was applied in the experiment to get a high ionization degree in plasma and to dissociate the interferential polyatomic ions. Meanwhile, the interferential multiply charged ions resulted by high‐irradiance were nearly eliminated in the spectrum by utilizing helium as the buffer gas in the ion source due to three‐body recombination, which resulted in a relatively clean background. Improved signal stability was obtained by automated step moving of the sample stage in short time intervals. By using two sets of Einzel lens in transport system, nearly uniform relative sensitivity coefficients (RSCs) were achieved for most of metal elements including light ions which were detected in extremely low sensitivity in previous hexapole transportation instrument. The resolving power reaches 2200, and the detection limits (DLs) are 10^?6 g/g for metal elements in the steel standard. Copyright © 2009 John Wiley & Sons, Ltd.     

Rapid screening and determination of 4‐chloroamphetamine in saliva by paper spray‐mass spectrometry and capillary electrophoresis‐mass spectrometry

A novel drug‐screening system, consisting of paper spray‐MS (PS‐MS) and a CE‐ESI‐MS method was developed. This system can be easily switched either to PS‐MS for rapidly screening samples or to the traditional CE‐ESI‐MS method for separation and to obtain detailed mass spectral information, while sharing the same mass spectrometer. In the former case, when a sharp (15°‐tip) chromatography paper was used, the optimized distance from the paper tip to the mass inlet was 7.7 mm, whereas the optimized distance for the CE‐ESI tip was ～13.5 mm. Using 4‐chloroamphetamine as a model compound, the LODs for PS‐MS and CE‐ESI‐MS were determined to ～0.1 and 0.25 ppm, respectively. Comparisons of results obtained using PS‐MS and CE‐ESI‐MS and the experimental conditions are described.     

Time‐of‐flight mass spectrometry depth profiling of sodium‐implanted polyethylene terephthalate

Depth profiling analysis of sodium (Na)‐implanted polyethylene terephthalate was performed by using time‐of‐flight secondary ion mass spectrometry in the cesium‐attachment regime. A radical redistribution of the main element due to diffusion and escape of some elements, such as oxygen and hydrogen, and carbonization of a top 550 nm layer were observed. The depth distribution of the implanted sodium was found to be radically different from the “theoretical” distribution calculated by using the Monte Carlo simulation method (TRIM code). We conclude that it is possible to perform an effective depth profiling analysis of an implanted polymer in the “standard” secondary ion mass spectrometry regime without using a big cluster primary ion beam.     

Analysis of lipids with desorption atmospheric pressure photoionization‐mass spectrometry (DAPPI‐MS) and desorption electrospray ionization‐mass spectrometry (DESI‐MS)

In this article, the effect of spray solvent on the analysis of selected lipids including fatty acids, fat‐soluble vitamins, triacylglycerols, steroids, phospholipids, and sphingolipids has been studied by two different ambient mass spectrometry (MS) methods, desorption electrospray ionization‐MS (DESI‐MS) and desorption atmospheric pressure photoionization‐MS (DAPPI‐MS). The ionization of the lipids with DESI and DAPPI was strongly dependent on the spray solvent. In most cases, the lipids were detected as protonated or deprotonated molecules; however, other ions were also formed, such as adduct ions (in DESI), [M‐H]⁺ ions (in DESI and DAPPI), radical ions (in DAPPI), and abundant oxidation products (in DESI and DAPPI). DAPPI provided efficient desorption and ionization for neutral and less polar as well as for ionic lipids but caused extensive fragmentation for larger and more labile compounds because of a thermal desorption process. DESI was more suitable for the analysis of the large and labile lipids, but the ionization efficiency for less polar lipids was poor. Both methods were successfully applied to the direct analysis of lipids from pharmaceutical and food products. Although DESI and DAPPI provide efficient analysis of lipids, the multiple and largely unpredictable ionization reactions may set challenges for routine lipid analysis with these methods. Copyright © 2012 John Wiley & Sons, Ltd.     

Optimal single‐embryo mass spectrometry fingerprinting

In pre‐implantation embryos, lipids play key roles in determining viability, cryopreservation and implantation properties, but often their analysis is analytically challenging because of the few picograms of analytes present in each of them. Matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) allows obtaining individual phospholipid profiles of these microscopic organisms. This technique is sensitive enough to enable analysis of individual intact embryos and monitoring the changes in membrane lipid composition in the early stages of development serving as screening method for studies of biology and biotechnologies of reproduction. This article introduces an improved, more comprehensive MALDI‐MS lipid fingerprinting approach that considerably increases the lipid information obtained from a single embryo. Using bovine embryos as a biological model, we have also tested optimal sample storage and handling conditions before the MALDI‐MS analysis. Improved information at the molecular level is provided by the use of a binary matrix that enables phosphatidylcholines, sphingomyelins, phosphatidylserines, phosphatidylinositols and phosphoethanolamines to be detected via MALDI(±)‐MS in both the positive and negative ion modes. An optimal MALDI‐MS protocol for lipidomic monitoring of a single intact embryo is therefore reported with potential applications in human and animal reproduction, cell development and stem cell research. Copyright © 2013 John Wiley & Sons, Ltd.     

T‐Jump/time‐of‐flight mass spectrometry for time‐resolved analysis of energetic materials

We describe a new T‐Jump/time‐of‐flight (TOF) mass spectrometer for the time‐resolved analysis of rapid pyrolysis chemistry of solids and liquids, with a focus on energetic materials. The instrument employs a thin wire substrate which can be coated with the material of interest, and can be rapidly heated (10⁵ K/s). The T‐Jump probe is inserted within the extraction region of a linear TOF mass spectrometer, which enables multiple spectra to be obtained during a single reaction event. By monitoring the electrical characteristics of the heated wire, the temperature could also be obtained and correlated to the mass spectra. As examples, we present time‐resolved spectra for the ignition of nitrocellulose and RDX. The fidelity of the instrument is demonstrated in the spectra presented which show the temporal formation and decay of several species in both systems. The simultaneous measurement of temperature enables us to extract the ignition temperature and the characteristic reaction time. The time‐resolved mass spectra obtained show that these solid energetic material reactions, under a rapid heating rate, can occur on a time scale of milliseconds or less. While the data sampling rate of 10 000 Hz was used in the present experiments, the instrument is capable of a maximum scanning rate of up to ～30 kHz. The capability of high‐speed time‐resolved measurements offers an additional analytical tool for the characterization of the decomposition, ignition, and combustion of energetic materials. Copyright © 2008 John Wiley & Sons, Ltd.     

Top‐down proteomics with a quadrupole time‐of‐flight mass spectrometer and collision‐induced dissociation

With slight modifications of the instrumental parameters, we demonstrate that satisfactory top‐down data can be obtained with collision‐induced dissociation (CID) tandem mass spectrometry on a quadrupole time‐of‐flight (qTOF) instrument not originally designed for this purpose. Protein identification is achieved with both N‐ and C‐terminal sequence tags and BLAST database searches. The accurate mass measurement of multiply charged fragment ions (mostly y and b‐type) supplements the limited set of cleavage sites and provides a high degree of sequence coverage (90–100%). Post‐translational modification issues can be addressed too. This approach might help those mass spectrometry (MS) core facilities that are not able to afford very high‐resolution instruments, thus expanding the benefits of top‐down protein analysis over the worldwide MS community. Copyright © 2009 John Wiley & Sons, Ltd.