Colorless to Purple–Red Switching Electrochromic Anthraquinone Imides with Broad Visible/Near‐IR Absorptions in the Radical Anion State: Simulation‐Aided Molecular Design

The large redshift of near‐infrared (NIR) absorptions of nitro‐substituted anthraquinone imide (Nitro‐AQI) radical anions, relative to other AQI derivatives, is rationalized based on quantum chemical calculations. Calculations reveal that the delocalization effects of electronegative substitution in the radical anion states is dramatically enhanced, thus leading to a significant decrease in the HOMO–LUMO band gap in the radical anion states. Based on this understanding, an AQI derivative with an even stronger electron‐withdrawing dicyanovinyl (di‐CN) substituent was designed and prepared. The resulting molecule, di‐CN‐AQI, displays no absorption in the Vis/NIR region in the neutral state, but absorbs intensively in the range of λ=700–1000 (λ_max≈860 nm) and λ=1100–1800 nm (λ_max≈1400 nm) upon one‐electron reduction; this is accompanied by a transition from a highly transmissive colorless solution to one that is purple–red. The relationship between calculated radical anionic HOMO–LUMO gaps and the electron‐withdrawing capacity of the substituents is also determined by employing Hammett parameter, which could serve as a theoretical tool for further molecular design.     

Ab initio investigation of 2,2′‐bis(4‐trifluoromethylphenyl)‐5,5′‐bithiazole for the design of efficient organic field‐effect transistors

The initial molecular structure of 2,2′‐bis(4‐trifluoromethylphenyl)‐ 5,5′‐bithiazole has been optimized in the ground state using density functional theory (DFT). The distribution patterns of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) have also been evaluated. To shed light on the charge transfer properties, we have calculated the reorganization energy of electron λ_e, the reorganization energy of hole λ_h, adiabatic electron affinity (EA_a), vertical electron affinity (EA_v), adiabatic ionization potential (IP_a), and vertical ionization potential (IP_v) using DFT. Based on the evaluation of hole reorganization energy, λ_h, and electron reorganization energy, λ_e, it has been predicted that 2,2′‐bis(4‐trifluoromethylphenyl)‐5,5′‐bithiazole would be a better electron transport material. Finally, the effect of electric field on the HOMO, LUMO, and HOMO–LUMO gap were observed to check its suitability for the use as a conducting channel in organic field‐effect transistors. © 2015 Wiley Periodicals, Inc.     

Bright Solid‐State Emission of Disilane‐Bridged Donor–Acceptor–Donor and Acceptor–Donor–Acceptor Chromophores

The development of disilane‐bridged donor–acceptor–donor (D‐Si‐Si‐A‐Si‐Si‐D) and acceptor–donor–acceptor (A‐Si‐Si‐D‐Si‐Si‐A) compounds is described. Both types of compound showed strong emission (λ_em=ca. 500 and ca. 400 nm, respectively) in the solid state with high quantum yields (Φ: up to 0.85). Compound 4 exhibited aggregation‐induced emission enhancement in solution. X‐ray diffraction revealed that the crystal structures of 2 , 4 , and 12 had no intermolecular π–π interactions to suppress the nonradiative transition in the solid state.     

Spectroscopical UV–Vis implications of an intramolecular η2–Mg coordination in bacteriochlorophyll–a from the Fenna–Matthews–Olson complex

Chlorophylls and their related compounds prominently feature a Mg²⁺ ion in the center of a porphyrine, with an intermolecular fifth coordination usually observed to place the ion out of the macrocyclic plane. Herein, we assess the role of a potential intramolecular η²–(C = C)Mg interaction and compare it to the intermolecular coordination from the Hystidine groupt to Mg²⁺ for Bacterichlorophyll–a (Bchl–a), the main photosynthetic pigment in the Fenna–Matthews–Olson complex present in green and purple bacteria. The influence of this fifth coordination on the UV‐Vis spectroscopy (CAM‐B3LYP/cc‐pVDZ), and the concomitant change in geometry around Mg in Bchl–a from planar to pyramidal is assessed by the quantum theory of atoms in molecules based non–covalent interactions scheme and through energetic analysis via natural bond orbital population methods at the M06‐2X/cc‐pVDZ and compared to the reference multi–hapto compound, magnesocene, Cp₂Mg.     

Nature of closed‐ and open‐shell interactions between noble metals and rare gas atoms

Interactions between noble metals and rare gases have become an interesting topic over the last few years. In this work, a computational study of the open‐shell (d¹⁰s¹) and closed‐shell (d¹⁰s and d¹⁰s²) noble metals (M = Cu, Ag, and Au) with three heaviest rare gas atoms (Rg = Kr, Xe, and Rn) has been performed. Potential energy curves based on ab initio [MP2, MP4, QCISD, and CCSD(T)] and DFT functionals (M06‐2X and CAM‐B3LYP) were obtained for ionic and neutral AuXe complexes. Dissociation energies indicate that neutral metals have the lowest and cationic metals have the highest affinities for interaction with rare gas atoms. For the same metals, there is a continuous increase in dissociation energies (D_e) from Kr to Rn. The nature of bonding and the trend of D_e and equilibrium bond lengths (R_e) have been interpreted by means of quantum theory of atoms in molecules, natural bond orbital, and energy decomposition analysis. © 2013 Wiley Periodicals, Inc.     

Electronic,optical, and charge transfer properties of porphyrin and metallated porphyrins in different media

Porphyrin and M-Porphyrin (M = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) complexes were designed to examine their organic light-emitting diode (OLED) properties. All calculations were performed in different media, which are gas, benzene, DMSO, and water phases. The calculations of both porphyrin and its metal complexes as a monomer form were performed at B3LYP/6-31G(d) level by using the Gaussian 16 and GaussView 6 package programs. On the other hand, emission calculations for the monomer form and dimer form computations of the studied compounds were carried out at PBE0/TZP and B3LYP/TZP levels, respectively, by using Amsterdam density functional (ADF) 2019 package program. The OLED tensors of the mentioned molecules, which are emission energies, reorganization energies (λ_e and λ_h), the ionization potentials and the electron affinities (adiabatic and vertical), the effective transfer integrals (V_e and V_h), and the charge transfer rates (W_e and W_h), were calculated to evaluate the OLED behaviors and determine the best OLED structure.     

Conjugated random terpolymers based on benzodithiophene,diketopyrrolopyrrole, and 8,10‐bis(thiophen‐2‐yl)‐2,5‐di(nonadecan‐3‐yl)bis[1,3]thiazolo[4,5‐f:5′,4′‐h]thieno[3,4‐b]quinoxaline for Efficient Polymer Solar Cell

A series of novel donor–acceptor (D–A) random conjugated terpolymers P2‐P4 along with the homopolymers P1 (BDT‐DPP) and P5 (BDT‐BTDQ) were designed and synthesized by copolymerizing a benzo[1,2‐b:4,5‐b]dithiophene (BDT) donor with an electron‐deficient diketopyrrolo[3,4‐c]pyrrole (DPP) unit and a benzothiadiazolo[3,4‐e]quinoxaline (BTDQ) moieties of different electron‐withdrawing strengths, and the resultant terpolymers showed broad absorption profile ranging from 300 to 1200 nm. The HOMO levels of the polymers were adjusted from ?5.23 to ?5.11 eV, and the optical bandgaps were controlled from 1.32 to 1.13 eV by changing the molar ratio of DPP and BTDQ acceptors. These terpolymers were used as a donor along with PC₇₁BM as an acceptor for the creation of polymer solar cells, and the performance was optimized via variable the donor to acceptor ratio and solvent vapor annealing. The polymer solar cells made from the random terpolymer P3 showed the highest overall power conversion efficiency of (9.27%), which is higher than that for the corresponding homo‐polymers counterparts, that is, P1 (7.27%) and P5 (7.68%). The results demonstrate that the designing of random D‐A1‐D‐A2 terpolymers may be the best approach for efficient polymer solar cells. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1478–1485     

Rapid Synthesis of D‐A′‐π‐A Dyes through a One‐Pot Three‐Component Suzuki–Miyaura Coupling and an Evaluation of their Photovoltaic Properties for Use in Dye‐Sensitized Solar Cells

Twenty‐four D‐A′–π‐A dyes were rapidly synthesized through a one‐pot three‐component Suzuki–Miyaura coupling reaction, which was assisted by microwave irradiation. We measured the absorption spectra, electrochemical properties, and solar‐cell performance of all the synthesized dyes. The D5 πA4 dye contained our originally designed rigid and nonplanar donor and exerted the highest efficiency at 5.4 %. The short‐circuit current (J_sc) was the most important parameter for the conversion efficiency (η) in the case of the organic D‐A′‐π‐A dyes. Optimal ranges for the D‐A′‐π‐A dyes were observed for high values of J_sc/λ_max at λ=560–620 nm, an optical‐absorption edge of λ=690–790 nm, and E_HOMO and E_LUMO values of <1.14 and ?0.56 to ?0.76 V, respectively.     

The influence of electron donor and electron acceptor groups on the electronic structure of the anti‐inflammatory tripeptide Cys‐Asn‐Ser

It has been discussed in the literature that electron delocalization along the peptide backbone and side chain modulates the physical and chemical features of peptides and proteins. The structure and properties of peptides are determined by their charge‐density distribution, such that the modification of its side chain plays an important role on its electronic structure and physicochemical properties. Research on Entamoeba histolytica soluble factors led to the identification of the pentapeptide Met‐Gln‐Cys‐Asn‐Ser, with anti‐inflammatory in vivo and in vitro effects. A synthetic pentapeptide, Met‐Pro‐Cys‐Asn‐Ser, maintained the same anti‐inflammatory actions in experimental assays. A previous theoretical study allowed proposing the Cys‐Asn‐Ser tripeptide (CNS tripeptide) as the pharmacophore group of both molecules. This theoretical hypothesis was recently confirmed experimentally. The objective of this work was to study the influence of the electron donor and electron withdrawing substituent groups on the electronic structure and physicochemical properties of the CNS tripeptide derivatives through a theoretical study at the density functional theory level of theory. Our results in deprotonation energies showed that the relative acidity of hydrogen atom (H2) of the serine‐amide group increases with the electron withdrawing groups. This result was confirmed by means of a study of bond order. The proton affinities illustrated that the electron donor groups favored the basicity of the amino group of the cysteine amino acid. Atomic charges, Frontier molecular orbitals (HOMO–LUMO), and electrostatic potential isosurface and its geometric parameters permitted to analyze the effect that provoked the electron donor and electron attractor groups on its electronic structure and physicochemical features and to identify some reactive sites that could be associated with the anti‐inflammatory activity of tripeptide CNS derivatives. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem 110:2398–2410, 2010     

Geometry and bond‐length alternation in nonlinear optical materials. II. Effects of donor strength in two push–pull molecules

The compounds N‐[2‐(4‐cyano‐5‐dicyanomethylene‐2,2‐dimethyl‐2,5‐dihydrofuran‐3‐yl)vinyl]‐N‐phenylacetamide, C₂₀H₁₆N₄O₂,(I), and 2‐{3‐cyano‐5,5‐dimethyl‐4‐[2‐(piperidin‐1‐yl)vinyl]‐2,5‐dihydrofuran‐2‐ylidene}malononitrile 0.376‐hydrate, C₁₇H₁₈N₄O·0.376H₂O, (II), are novel push–pull molecules. The significant bonding changes in the polyene chain compared with the parent molecule 2‐dicyanomethylene‐4,5,5‐trimethyl‐2,5‐dihyrofuran‐3‐carbonitrile are consistent with the relative electron‐donating properties of the acetanilido and piperidine groups. The packing of (I) utilizes one phenyl–cyano C—H...N and two phenyl–carbonyl C—H...O hydrogen bonds. Compound (II) crystallizes with a partial water molecule (0.376H₂O), consistent with cell packing that is dominated by attractive C—H...N(cyano) interactions. These compounds are precursors to novel nonlinear optical chromophores, studied to assess the impact of donor strength and the extent of conjugation on bond‐length alternation, crystal packing and aggregation.     

Surface Charge‐Transfer Doping of Graphene Nanoflakes Containing Double‐Vacancy (5‐8‐5) and Stone–Wales (55‐77) Defects through Molecular Adsorption

The adsorption of six electron donor–acceptor (D/A) organic molecules on various sizes of graphene nanoflakes (GNFs) containing two common defects, double‐vacancy (5‐8‐5) and Stone–Wales (55‐77), are investigated by means of ab initio DFT [M06‐2X(‐D3)/cc‐pVDZ]. Different D/A molecules adsorb on a defect graphene (DG) surface with binding energies (ΔE_b) of about ?12 to ?28 kcal mol^?1. The ΔE_b values for adsorption of molecules on the Stone–Wales GNF surface are higher than those on the double vacancy GNF surface. Moreover, binding energies increase by about 10 % with an increase in surface size. The nature of cooperative weak interactions is analyzed based on quantum theory of atoms in molecules, noncovalent interactions plot, and natural bond order analyses, and the dominant interaction is compared for different molecules. Electron density population analysis is used to explain the n‐ and p‐type character of defect graphene nanoflakes (DGNFs) and also the change in electronic properties and reactivity parameters of DGNFs upon adsorption of different molecules and with increasing DGNF size. Results indicate that the HOMO–LUMO energy gap (E_g) of DGNFs decreases upon adsorption of molecules. However, by increasing the size of DGNFs, the E_g and chemical hardness of all complexes decrease and the electrophilicity index increases. Furthermore, the values of the chemical potential of acceptor–DGNF complexes decrease with increasing size, whereas those of donor–DGNF complexes increase.     

A Highly Efficient Near‐Infrared‐Emissive Copolymer with a N=N Double‐Bond π‐Conjugated System Based on a Fused Azobenzene–Boron Complex

Fused azobenzene–boron complexes (BAzs) show highly efficient near‐infrared (NIR) emission from the nitrogen–nitrogen double bond (N=N) containing π‐conjugated copolymer. Optical measurements showed that BAz worked as a strong electron acceptor because of the intrinsic electron deficiency of the N=N double bond and the boron–nitrogen (B?N) coordination which dramatically lowered the energy of the lowest unoccupied molecular orbital (LUMO) of the azobenzene ligand. The simple donor–acceptor (D–A) type copolymer of bithiophene (BT) and BAz exhibited intense photoluminescence (PL) in the NIR region both in the dilute solution (λ_PL=751 nm, Φ_PL=0.25) and in the film (λ_PL=821 nm, Φ_PL=0.038). The BAz monomer showed slight PL in the dilute solution, and aggregation‐induced emission (AIE) was detected. We proposed that N=N double bonds should be attractive and functional building blocks for designing π‐conjugated materials.     

Modulation of electronic properties of π‐conjugated copolymers derived from naphtho[1,2‐b:5,6‐b′]dithiophene donor unit: A structure‐property relationship study

A set of three donor‐acceptor conjugated (D‐A) copolymers were designed and synthesized via Stille cross‐coupling reactions with the aim of modulating the optical and electronic properties of a newly emerged naphtho[1,2‐b:5,6‐b′]dithiophene donor unit for polymer solar cell (PSCs) applications. The PTNDTT‐BT , PTNDTT‐BTz , and PTNDTT‐DPP polymers incorporated naphtho[1,2‐b:5,6‐b′]dithiophene ( NDT ) as the donor and 2,2′‐bithiazole ( BTz ), benzo[1,2,5]thiadiazole ( BT ), and pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione ( DPP ), as the acceptor units. A number of experimental techniques such as differential scanning calorimetry, thermogravimetry, UV–vis absorption spectroscopy, cyclic voltammetry, X‐ray diffraction, and atomic force microscopy were used to determine the thermal, optical, electrochemical, and morphological properties of the copolymers. By introducing acceptors of varying electron withdrawing strengths, the optical band gaps of these copolymers were effectively tuned between 1.58 and 1.9 eV and their HOMO and LUMO energy levels were varied between ?5.14 to ?5.26 eV and ?3.13 to ?3.5 eV, respectively. The spin‐coated polymer thin film exhibited p‐channel field‐effect transistor properties with hole mobilities of 2.73 × 10^?3 to 7.9 × 10^?5 cm² V^?1 s^?1. Initial bulk‐heterojunction PSCs fabricated using the copolymers as electron donor materials and [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) as the acceptor resulted in power conversion efficiencies in the range of 0.67–1.67%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2948–2958     

Donor–acceptor complex of a new bis‐TTF donor containing a pyridine diester spacer with TCNQ as the acceptor: a disappointing system

A new bis‐TTF donor (TTF is tetrathiafulvalene) containing a pyridine diester spacer, namely bis{2‐[(6,7‐tetramethylene‐3‐methylsulfanyltetrathiafulvalen‐2‐yl)sulfanyl]ethyl} pyridine‐2,6‐dicarboxylate–tetracyanoquinodimethane–dichloromethane (2/1/2), 2C₃₃H₃₃NO₄S₁₂·C₁₂H₄N₄·2CH₂Cl₂, has been synthesized and its electron‐donating ability determined by cyclic voltammetry. The electrical conductivity and crystal structure of this donor–acceptor (DA) complex with TCNQ (tetracyanoquinodimethane) as the acceptor are presented. The TCNQ moiety lies across a crystallographic inversion centre. In the crystal structure, TTF and TCNQ entities are arranged in alternate stacks; this feature, together with the bond lengths of the TCNQ molecule, suggest that the expected charge transfer has not occurred and that the D and A entities are in the neutral state, in agreement with the poor conductivity of the material (σ_RT = 2 × 10⁻⁶ S cm⁻¹).     

Relationship between the energy of donor–acceptor bond and the reorganization energy in molecular complexes

Donor–acceptor complexes of silicon halides with ammonia, pyridine, and 2,2′bipyridine SiX₄ · nD (X = F, Cl, Br) have been studied at the B3LYP/pVDZ level of theory. Energies of the donor–acceptor bond have been estimated taking into account the reorganization energy of the donor and acceptor fragments and basis set superposition error correction. Despite of the very low (or even negative) dissociation energy of SiX₄ · nD into free fragments, the Si–N bonding in all complexes is rather strong (75–220 kJ mol^?1). It is the reorganization energy of the acceptor SiX₄ (75–280 kJ mol^?1) that governs the dissociation energy of the complex. Thus, in contrast to the complexes of group 13 halides, the reorganization effects are crucial for the complexes of group 14 halides, and their neglecting leads to erroneous conclusions about the strength of the donor–acceptor bond in these systems. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Photoinduced Energy and Electron Transfer in Phenylethynyl‐Bridged Zinc Porphyrin–Oligothienylenevinylene–C60 Ensembles

Donor–bridge–acceptor triad (Por‐2TV‐C₆₀) and tetrad molecules ((Por)₂‐2TV‐C₆₀), which incorporated C₆₀ and one or two porphyrin molecules that were covalently linked through a phenylethynyl‐oligothienylenevinylene bridge, were synthesized. Their photodynamics were investigated by fluorescence measurements, and by femto‐ and nanosecond laser flash photolysis. First, photoinduced energy transfer from the porphyrin to the C₆₀ moiety occurred rather than electron transfer, followed by electron transfer from the oligothienylenevinylene to the singlet excited state of the C₆₀ moiety to produce the radical cation of oligothienylenevinylene and the radical anion of C₆₀. Then, back‐electron transfer occurred to afford the triplet excited state of the oligothienylenevinylene moiety rather than the ground state. Thus, the porphyrin units in (Por)‐2TV‐C₆₀ and (Por)₂‐2TV‐C₆₀ acted as efficient photosensitizers for the charge separation between oligothienylenevinylene and C₆₀.     

Efficient Intramolecular Charge Transfer in Oligoyne‐Linked Donor–π–Acceptor Molecules

Studies are reported on a series of triphenylamine–(C?C)_n–2,5‐diphenyl‐1,3,4‐oxadiazole dyad molecules (n=1–4, 1 , 2 , 3 and 4 , respectively) and the related triphenylamine‐C₆H₄–(C?C)₃–oxadiazole dyad 5 . The oligoyne‐linked D–π–A (D=electron donor, A=electron acceptor) dyad systems have been synthesised by palladium‐catalysed cross‐coupling of terminal alkynyl and butadiynyl synthons with the corresponding bromoalkynyl moieties. Cyclic voltammetric studies reveal a reduction in the HOMO–LUMO gap in the series of compounds 1 – 4 as the oligoyne chain length increases, which is consistent with extended conjugation through the elongated bridges. Photophysical studies provide new insights into conjugative effects in oligoyne molecular wires. In non‐polar solvents the emission from these dyad systems has two different origins: a locally excited (LE) state, which is responsible for a π*→π fluorescence, and an intramolecular charge transfer (ICT) state, which produces charge‐transfer emission. In polar solvents the LE state emission vanishes and only ICT emission is observed. This emission displays strong solvatochromism and analysis according to the Lippert–Mataga–Oshika formalism shows significant ICT for all the luminescent compounds with high efficiency even for the longer more conjugated systems. The excited‐state properties of the dyads in non‐polar solvents vary with the extent of conjugation. For more conjugated systems a fast non‐radiative route dominates the excited‐state decay and follows the Engelman–Jortner energy gap law. The data suggest that the non‐radiative decay is driven by the weak coupling limit.     

Ultrafast Photoinduced Energy and Electron Transfer in Multi‐Modular Donor–Acceptor Conjugates

New multi‐modular donor–acceptor conjugates featuring zinc porphyrin (ZnP), catechol‐chelated boron dipyrrin (BDP), triphenylamine (TPA) and fullerene (C₆₀), or naphthalenediimide (NDI) have been newly designed and synthesized as photosynthetic antenna and reaction‐center mimics. The X‐ray structure of triphenylamine‐BDP is also reported. The wide‐band capturing polyad revealed ultrafast energy‐transfer (k_ENT=1.0×10¹² s^?1) from the singlet excited BDP to the covalently linked ZnP owing to close proximity and favorable orientation of the entities. Introducing either fullerene or naphthalenediimide electron acceptors to the TPA‐BDP‐ZnP triad through metal–ligand axial coordination resulted in electron donor–acceptor polyads whose structures were revealed by spectroscopic, electrochemical and computational studies. Excitation of the electron donor, zinc porphyrin resulted in rapid electron‐transfer to coordinated fullerene or naphthalenediimide yielding charge separated ion‐pair species. The measured electron transfer rate constants from femtosecond transient spectral technique in non‐polar toluene were in the range of 5.0×10⁹–3.5×10¹⁰ s^?1. Stabilization of the charge‐separated state in these multi‐modular donor–acceptor polyads is also observed to certain level.     

Optical properties of (Z)‐2‐(2‐phenylhydrazinylidene)acenaphthen‐1(2H)‐one: a potential electron donor in organic solar cells

Electron‐donating molecules play an important role in the development of organic solar cells. (Z )‐2‐(2‐Phenylhydrazinylidene)acenaphthen‐1(2H )‐one (PDAK), C₁₈H₁₂N₂O, was synthesized by a Schiff base reaction. The crystal structure shows that the molecules are planar and are linked together forming `face‐to‐face' assemblies held together by intermolecular C—H…O, π–π and C—H…π interactions. PDAK exhibits a broadband UV–Vis absorption (200–648 nm) and a low HOMO–LUMO energy gap (1.91 eV; HOMO is the highest occupied molecular orbital and LUMO is the lowest unoccupied molecular orbital), while fluorescence quenching experiments provide evidence for electron transfer from the excited state of PDAK to C₆₀. This suggests that the title molecule may be a suitable donor for use in organic solar cells.