Melt block copolymerization of ϵ-caprolactone and L-lactide

AB block copolymers of ϵ-caprolactone and (L )-lactide could be prepared by ring-opening polymerization in the melt at 110°C using stannous octoate as a catalyst and ethanol as an initiator provided ϵ-caprolactone was polymerized first. Ethanol initiated the polymerization of ϵ-caprolactone producing a polymer with ϵ-caprolactone derived hydroxyl end groups which after addition of L -lactide in the second step of the polymerization initiated the ring-opening copolymerization of L -lactide. The number-average molecular weights of the poly(ϵ-caprolactone) blocks varied from 1.5 to 5.2 × 10³, while those of the poly(L -lactide) blocks ranged from 17.4 to 49.7 × 10³. The polydispersities of the block copolymers varied from 1.16 to 1.27. The number-average molecular weights of the polymers were controlled by the monomer/hydroxyl group ratio, and were independent on the monomer/stannous octoate ratio within the range of experimental conditions studied. When L -lactide was polymerized first, followed by copolymerization of ϵ-caprolactone, random copolymers were obtained. The formation of random copolymers was attributed to the occurrence of transesterification reactions. These side reactions were caused by the ϵ-caprolactone derived hydroxyl end groups generated during the copolymerization of ϵ-caprolactone with pre-polymers of L -lactide. The polymerization proceeds through an ester alcoholysis reaction mechanism, in which the stannous octoate activated ester groups of the monomers react with hydroxyl groups. © 1997 John Wiley & Sons, Inc.     

Synthesis and Characterization of Crosslinked Polymers for Biomedical Composites

Three kinds of low molecular weight unsaturated polyesters containing carbon-carbon double bonds were synthesized by the reaction of poly (ε-caprolactone) diol or D,L-lactide and glycolic acid with maleic anhydride or fumaric acid. These functionalized polymers were thermally crosslinked in the presence of radical initiator to prepare the crosslinked polymers available as a matrix resin for biomedical composites. Hydrolysis of the crosslinked polyesters was investigated in buffer solution at 37°C.     

Synthesis and modification of new biodegradable copolymers: Serine/glycolic acid based copolymers

Serine/glycolic acid-based biodegradable polymers have been prepared by ring-opening homopolymerization of 3-(O-benzyl)-L -serinylmorpholine-2,5-dione, and ring-opening copolymerization of the morpholine-2,5-dione derivative and L -lactide/ϵ-caprolactone. The homopolymerization was carried out in the melt at 165°C for 3 min using stannous octanoate as the initiator and continued at lower reaction temperatures (130–150°C) for 48 h, using a molar ratio of monomer and initiator of 1000 yielded a polymer of M_n = 4000. The polymer prepared by homopolymerization of the morpholine-2,5-dione derivative was composed of alternating protected serine and glycolic acid residues. Random copolymers of serine and glycolic acid and L -lactic acid/ϵ-caprolactone were synthesized by copolymerization reaction of 3-(O-benzyl)-L -serinylmorpholine-2,5-dione and lactide or ϵ-caprolactone in the melt at 165°C for 3 min and further reaction at 130°C using stannous octanoate as an initiator. The polymers were deprotected and functionalized through the side chain hydroxyl group of serine residues with an acrylate moiety for applications in injectable drug delivery, cell encapsulation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1901–1907, 1997     

Thermogelling hydrogels of poly(ε-caprolactone-co-D,L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L-lactide) and poly(ε-caprolactone-co-L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L-lactide) aqueous solutions

Thermogelling poly(ε-caprolactone-co-D,L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L -lactide) and poly(ε-caprolactone-co-L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L -lactide) triblock copolymers were synthesized through the ring-opening polymerization of ε-caprolactone and D,L -lactide or L -lactide in the presence of poly(ethylene glycol). The polymerization reaction was carried out in 1,3,5-trimethylbenzene with Sn(Oct)₂ as the catalyst at various temperatures, and the yields were about 96%. The molecular weights and polydispersities (M_w/M_n) by gel permeation chromatography were in the ranges of 5140–6750 and 1.35–1.45, respectively. The differential scanning calorimetry results showed that the melting temperatures of the poly(ε-caprolactone) components were between 30 and 40 °C. By the subtle tuning of the chemical compositions and microstructures of these triblock copolymers, the aqueous solutions underwent sol–gel transitions as the temperature increased, with the suitable lower critical solution temperature in the range of 17–28 °C at different concentrations. Transesterification in the polymerization process generated the redistribution of sequences, which remarkably affected the sol–gel transition temperature. The amphiphilic copolymers formed micelles in aqueous solutions with a diameter of 62 nm and a critical micelle concentration of about 0.032 wt % at 20 °C. Micelles aggregated as the temperature increased, leading to gel formation. The sol–gel transition was studied, with a focus on the structure–property relationship. It is expected to have potential applications in drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4091–4099, 2007     

Synthesis and characterization of biodegradable block copolymers of ϵ-caprolactone and D,L-lactide initiated by potassium poly(ethylene glycol)ate

Poly(D ,L -lactide)–poly(ϵ-caprolactone)–poly(ethylene glycol)–poly(ϵ-caprolactone)–poly(D ,L -lactide) block copolymer (PLA–PCL–PEG–PCL–PLA) was prepared by copolymerization of ϵ-caprolactone (ϵ-CL) and D ,L -lactide (D ,L -LA) initiated by potassium poly(ethylene glycol)ate in THF at 25°C. The copolymers with different composition were synthesized by adjusting the mole ratio of reaction mixture. The resulted copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, DSC, and GPC. Efforts to prepare copolymers with the corresponding structure of PCL–PLA–PEG–PLA–PCL and D ,L -lactide/ϵ-caprolactone random copolymers were not successful. © 1997 John Wiley & Sons, Inc.     

Novel functionalization routes of poly(ϵ‐caprolactone)

The aluminum alkoxide mediated ring opening polymerization of functional lactones, such as γ‐ethylene ketal‐ϵ‐caprolactone (TOSUO), γ‐(triethylsilyloxy)‐ϵ‐caprolactone (SCL) and γ‐bromo‐ϵ‐caprolactone (γBrCL), is a versatile route to polyesters containing ketal, ketone, alcohol and bromide groups. As result of living polyaddition mechanism, random and block copolymerization of ϵCL and γBrCL has been successfully carried out. The reactivity ratios are quite similar (1.08 for ϵ‐CL, and 1.12 for γBrCL). These random copolymers are semicrystalline when they contain less than 30 mol% of γBrCL, otherwise they are amorphous. No transesterification reaction occurs during the sequential polymerization of ϵ‐CL and γBrCL leading to block copolymers. Reaction of poly(ϵCL‐co‐γBrCL) with pyridine provides quantitatively a polycationic polyester. Furthermore, the reaction of this random copolymer with 1,8‐diazabicyclo[5.4.0] undec‐7‐ene (DBU) is a route to unsaturated polyesters, whose the non conjugated double bonds can be quantitatively converted into epoxides by reaction with m‐chloroperbenzoic acid (mCPBA). No chain degradation is detected during these derivatization reactions of poly(ϵCL‐co‐γBrCL).     

Synthesis and characterization of highly random copolymer of ϵ-caprolactone and D,L-lactide using rare earth catalyst

Highly random copolymers of ϵ-caprolactone (CL) and D ,L -lactide (LA) were synthesized by a new catalyst system, rare earth chloride–propylene oxide (PO) system. In the presence of propylene oxide, all rare earth chlorides tested are highly effective for the copolymerization. The influences of reaction conditions on the copolymerization catalyzed by the NdCl₃-5PO system have been investigated in detail. The reactivity ratios of ϵ-caprolactone and D ,L -lactide were determined and show that the copolymerization with this new rare earth catalyst is closer to ideal copolymerization than reported for other catalysts. The microstructure of copolymer analyzed by ¹³C-NMR shows that the monomer units in the copolymer is near to completely random distribution with a short average monomer sequence length. The DSC measurement confirms the high randomness of the chain structure. The mechanism studied by NMR indicates that the rare earth alkoxide generated by the reaction of rare earth chloride with propylene oxide initiates the copolymerization, and then proceeds via a “coordination-insertion” mechanism with acyl-oxygen bond cleavage of CL and LA. © 1996 John Wiley & Sons, Inc.     

Benzo-12-crown-4 modified N-heterocyclic carbene for organocatalyst: Synthesis,characterization and degradation of block copolymers of ϵ-caprolactone with L-lactide

A set of poly(L-lactide)-poly(?-caprolactone) diblock copolymers (AB) and poly(L-lactide)-poly(?-caprolactone)-poly(L-lactide) triblock copolymers (ABA) with predictable molecular weights and relatively narrow distributions were synthesized by ring-opening polymerization of successively added ?-caprolactone (?-CL) and L-lactide (LLA) using 4-methyl benzo-12-crown-4 imidazol-2-ylidene as catalyst. The effects of polymerization conditions, such as reaction time, temperature, monomer/catalyst molar ratio and monomer concentration on the copolymerization have been discussed in detail. The resulting copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, GPC and DSC methods which confirmed the successful synthesis of block copolymers of LLA and ?-CL. Hydrolytic degradation of the polymers showed that the PLLA-PCL-PLLA copolymer exhibited faster degradation as compared with the PCL homopolymer in alkaline medium at 37°C.     

Microspheres by dispersion polymerization of lactides and ϵ-caprolactone

Polyester microspheres were synthesized by the ring-opening polymerization of lactides (racemate or optically active L,L-isomer) and ϵ-caprolactone. Polymerizations were carried out in the 1,4-dioxane-heptane mixed solvents in the presence of poly(dodecyl acrylate)-g-poly(ϵ-caprolactone) (poly(DA-CL)) used as surface-active agent. Polymerizations were initiated with tin(II) 2-ethylhexanoate (lactides), diethylaluminum ethoxide or sodium trimethylsilanolate (ϵ-caprolactone). In the studies of the polymerization of lactides, relations were determined between diameters, the distribution of diameters of synthesized microspheres, and the structure of poly(DA-CL). It was found that it is possible, depending on thermal treatment of microspheres after synthesis, to obtain polylactide microspheres differing in the degree of crystallinity. Kinetics of the dispersion pseudoanionic and anionic polymerizations of ϵ-caprolactone were also investigated and the results of these studies were compared with the data for the corresponding polymerizations of ϵ-caprolactone in solution.     

Synthesis of dendritic–linear block copolymers by living ring-opening polymerization of lactones and lactides using dendritic initiators

Polyether dendrons have been successfully used as macroinitiators for the living ring-opening polymerization (ROP) of lactones and lactides. A hydroxyl group located at the focal point of dendrimers of different generations was transformed into diethyl aluminum alkoxides by reaction with triethyl aluminum. The dendritic aluminum alkoxides proved to be efficient macroinitiators for the living ROP of ε-caprolactone (εCL), 1,4,8-trioxa(4,6)spiro[9]undecanone (TOSUO), D ,L - and L ,L -lactide. Formation of these block copolymers of unusual macromolecular architecture was supported by size exclusion chromatography and spectroscopy. The versatility of this synthetic approach allowed ω-functional dendrimer block-polyesters, such as macromonomer, and macromolecules with novel architectures, to be prepared. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1923–1930, 1999     

Modified poly(ϵ-caprolactone)s and their use for drug-encapsulating nanoparticles

Poly(ϵ-caprolactone) (PCL)-polydimethylsiloxane diblock and triblock copolymers and poly(ϵ-caprolactone-co-4-ethylcaprolactone) random copolymers were prepared through the homogeneously catalyzed coordination anionic polymerization of ϵ-caprolactone (CL) and the copolymerization of CL with 4-ethyl-ϵ-caprolactone (EtCL) in the presence of hydroxy-terminated polysiloxanes or allyl alcohol as chain-transfer agents, respectively. Polysiloxane precursors with hydroxypropyl or hydroxyethyl propyl ether end groups were obtained by the hydrosilation of the appropriate unsaturated alcohol with monofunctional or difunctional hydro-terminated polysiloxanes of different molecular weights. As proven by differential scanning calorimetry analysis, the presence of siloxane blocks and EtCL units determined the diminished copolymer crystallinity, which was shown by the reduced melting temperatures and enthalpy of fusion with respect to those of pure PCL. Both types of copolymers were found to form, in the presence of a poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) emulsifier, monodisperse and stable nanoparticles able to encapsulate different types of bioactive compounds (Vitamin E and indomethacin). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 689–700, 2004     

Phosphazene/Lewis Acids as Highly Efficient Cooperative Catalyst for Synthesis of High-Molecular-Weight Polyesters by Ring-Opening Alternating Copolymerization of Epoxide and Anhydride

The synthesis of high-molecular-weight polyesters via the ring-opening alternating copolymerization (ROAC) of cyclic anhydrides and epoxides using organocatalysts remains a major challenge. In this context, the organic cyclic trimeric phosphazene base ( CTPB ) was used as an efficient catalyst for the ROAC of phthalic anhydride (PA) with epoxides. It was found that the activity and PA conversion dramatically increased with the addition of triethyl borane (TEB) as a cocatalyst, even a small amount of TEB, for example, 5 mol % relative to CTPB . The molecular structures of obtained polyesters were characterized by nuclear magnetic resonance (¹H NMR, ¹³C NMR) and matrix-assisted laser desorption/ionization time-of-flight (MALDI TOF), which demonstrated the formation of perfectly alternating polyesters with unimodal and narrow molecular weight distributions. Different molecular weight polyesters (up to 118.5 kg mol⁻¹) were facilely prepared by reducing the loading of CTPB and TEB, while the polymerizations were fast (turnover frequency, TOF up to 500 h⁻¹). Thermal analysis of the resulting polymers indicated that the alternating polyesters were amorphous, and their T_gs increased with the increment of molecular weights. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 803–810     

Zinc Glutarate Catalyzed Synthesis and Biodegradability of Poly(carbonate-co-ester)s from CO2, Propylene Oxide,and ϵ-Caprolactone

A zinc glutarate (ZnGA) catalyst was prepared from the reaction of zinc oxide and glutaric acid in dry toluene. ZnGA was found to exhibit a catalytic activity for the copolymerization of carbon dioxide (CO₂) and propylene oxide (PO) and the homopolymerization of PO but to reveal no catalytic activity for the homopolymerization of ϵ-caprolactone (CL). The ZnGA-catalyzed polymerization was extended for the terpolymerization of CO₂ with PO and CL, producing poly(propylene carbonate-co-ϵ-caprolactone)s (PPCCLs) with a reasonably high molecular weight in high yields. In the terpolymerization, PO and CL were used as both co-monomers and reaction media, after the reaction completed, the excess co-monomers were easily recovered and reused in the next terpolymerization batch. For the synthesized polymers, enzymatic and biological degradability were investigated.     

The influence of N‐vinyl pyrrolidone on polymerization kinetics and thermo‐mechanical properties of crosslinked acrylate polymers

Polymerization of multifunctional acrylate monomers generates crosslinked polymers that are noted for their mechanical strength, thermal stability, and chemical resistance. A common reactive diluent to photopolymerizable formulations is N‐vinyl pyrrolidone (NVP), which is known to reduce the inhibition of free radical photopolymerization by atmospheric oxygen. In this work, the copolymerization behavior of NVP was examined in acrylate monomers with two to five functional groups. At concentrations as low as 2 wt %, NVP increases the polymerization rate in copolymerization with multifunctional acrylate monomer. The relative rate enhancement associated with adding NVP increases dramatically as the number of acrylate double bonds changes from two to five. The influence of NVP on polymerization kinetics is related to synergistic cross‐propagation between NVP and acrylate monomer, which becomes increasingly favorable with diffusion limitations. This synergy extends bimolecular termination into higher double bond conversion through reaction diffusion controlled termination. Copolymerizing concentrations of 5–30 DB% NVP with diacrylate or pentaacrylate monomer also increases Young's modulus and the glass transition temperature (T_g) in comparison to neat acrylate polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4062–4073, 2007     

Unsaturated,biobased polyesters and their cross‐linking via radical copolymerization

Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their T_g values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010     

Aza‐Michael addition reaction: Post‐polymerization modification and preparation of PEI/PEG‐based polyester hydrogels from enzymatically synthesized reactive polymers

The utility of aza‐Michael addition chemistry for post‐polymerization functionalization of enzymatically prepared polyesters is established. For this, itaconate ester and oligoethylene glycol are selected as monomers. A Candida Antarctica lipase B catalyzed polycondensation reaction between the two monomers provides the polyesters, which carry an activated carbon‐carbon double bond in the polymer backbone. These electron deficient alkenes represent suitable aza‐Michael acceptors and can be engaged in a nucleophilic addition reaction with small molecular mono‐amines (aza‐Michael donors) to yield functionalized linear polyesters. Employing a poly‐amine as the aza‐Michael donor, on the other hand, results in the formation of hydrophilic polymer networks. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 745–749     

Synthesis and chemical structural analysis of nitroxyl‐radical‐incorporated poly(acrylic acid/lactide/ϵ‐caprolactone) copolymers

The goal of this research is to synthesize biodegradable polymers that would have nitroxyl radical biological functions. Linear aliphatic polyesters were chosen as the starting materials. The hydroxyl‐terminated polylactide/?‐caprolactones (PBLC‐OHs) were first synthesized by melt ring‐opening copolymerization in the presence of benzyl alcohol and stannous octoate. PBLC‐OHs were used as the precursor for the synthesis of double bond‐functionalized polylactide/?‐caprolactones (PBLC‐Mas) by reacting the hydroxyl end groups of PBLC‐OH with maleic anhydride in melt at 130 °C. Acrylic acid/lactide/?‐caprolactone graft copolymers (PBLCAs) were then successfully carried out by the radical copolymerization of acrylic acid and PBLC‐Ma initiated by azobisisobutyronitrile. Finally, nitroxyl radicals [4‐amino‐2,2,6,6‐tetramethylpiperidine‐1‐oxy (TAM)] were incorporated into the carboxylic acid sites of the acrylic acid/lactide/?‐caprolactone copolymer (TAM‐PBLCA) by reacting TAM with PBLCA in the presence of N,N′‐carbonyl diimidazole. A high content of TAM was incorporated into the PBLCA copolymer. The polymers synthesized were characterized by ¹H and ¹³C NMR, Fourier transform infrared spectroscopy, and electron paramagnetic resonance spectra. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4214–4226, 2001     

端基为巯基的聚己内酯的合成

以三氟甲烷磺酸亚锡为催化剂, 2-巯基乙醇为引发剂, 在温和条件下引发ε-己内酯的开环聚合, 得到端基为巯基的聚己内酯, 其分子量可控且分布较窄. 在此过程中, 巯基不需要保护而不会影响聚酯的结构, 当聚合温度升高时, 聚合物端基结构不发生改变, 但分子量分布变宽. 端基为巯基的聚己内酯能够通过偶合反应生成中间含二硫键的聚己内酯; 同时, 以2-羟乙基二硫化合物为引发剂合成得到分子中间含二硫键的窄分布聚己内酯, 经还原后也可得到端基为巯基的聚己内酯. 这两种方法条件温和, 效率较高, 具有良好的可控性.     

Investigation of Conversion of Styrene and Fumarate Double Bonds in Unsaturated Polyester Resins

The conversion of styrene and fumarate double bonds in the copolymerization of unsaturated polyesters and styrene was investigated. Several commercial polyester resins including Bisphenol-type, Iso-type and G-type resins were used. The initial fumarate double bond, the equivalent double bond per 100 g of the polyesters, was determined by the hydrogenation procedure which was developed for the present study. Using palladium-carbon catalyst and benzene-acetone (1:1) mixture, polyester resin can be hydrogenated satisfactorily.

The cured resin was extracted with chloroform. The styrene in the chloroform was determined by ASTM D-1159, bromine index method. The conversion of the fumarate double bond was calculated from the soluble part of polyester resin using the theoretical equations which were derived from the basic theory of Flory. The validity of the equations was examined by application of Funke et al.'s experimental results and found to be satisfactory. With the confidence of these results, commercial polyester resins were investigated to determine the effect of the condition of polymerization on the conversion of styrene and fumarate double bonds.

For all the polyesters the conversion of styrene was at least over 80% after a room temperature cure of 24 hr with a dimethyl anilin-cobalt naphthenate-methyl ethyl ketone peroxide three component catalyst system, and it reached approximately 100% after postcure of 100[ddot]C for 2 hr. On the other hand, the conversion of the fumarate double bond depended greatly upon the type of the resin. Bisphenol-type resin gave the highest conversion, and the conversion for Iso-type resin was higher than that for G-type resin. In the case of Bisphenol-type resin, there was no difference in the conversion of fumarate double bond between the room temperature cure and the postcure, but the conversions of fumarate double bond for G- and Iso-type resins were increased remarkably by postcure. The Barcol hardness is applicable to determine the conversion of styrene for the specified polyesters based on the relationship between the conversion of styrene and the Barcol hardness.     

Anionic polymerization of lactones initiated by alkali graphitides. I. Polymerization of ϵ-caprolactone initiated by KC24

The influence of the reaction conditions (time, temperature, concentrations of the monomer, and the initiator) on the amount and composition of the oligomers and high molecular products formed during the heterogeneous anionic polymerization of ?-caprolactone was investigated. The polymerization was initiated by KC₂₄ in xylene or tetrahydrofuran. Conditions were found under which intra- and intermolecular transesterification was strongly suppressed, thus providing the opportunity for the formation of polyesters with viscometric molecular masses of more than 300,000 and good yields (80% and higher). The total quantity of products with a viscometric molecular mass below 2500 did not exceed 15%; that of the cyclic dimer was not in excess of 5%. Peculiar features of the KC₂₄ initiated polymerization are the insignificant rise in the number of oligomers and the formation of high polymers even in strongly diluted solutions of ?-caprolactone (0.2 mol/L and lower). The quantity and molecular mass of the polymers obtained decreased as the temperature increased. It was also established that the polymerization of the cyclic dimer of ?-caprolactone is not initiated by KC₂₄.