Cycloadditions — Definition,Classification, and Characterization

The growing volume of publications on cycloadditions indicates that this general type of reaction merits a place beside the better-known substitutions, eliminations, and additions. The world of phenomena does not provide us with definition and classification principles. These are created by the scientist and are not free from arbitrariness. A terminology^[1] is suggested for cycloadditions. These reactions do not all proceed by the same mechanism. Since ideas about reaction mechanism can change with the introduction of new criteria, it is shortsighted to base definitions and classifications on mechanism alone. Consequently, the definition of cycloadditions will not be restricted simply to multi-center processes with a cyclic electron shift.     

Experimental and Theoretical DFT Study on Synthesis of Sterically Crowded 2,3,3,(4)5‐Tetrasubstituted‐4‐nitroisoxazolidines via 1,3‐Dipolar Cycloaddition Reactions Between Ketonitrones and Conjugated Nitroalkenes

1,3‐Dipolar cycloaddition reactions between ketonitrones ( 1a , 1b , 1c , 1d , 1e ) and β‐substituted nitroalkenes ( 2a , 2b , 2c , 2d ) proceed under mild conditions, with complete regioselectivity, and lead with high yields to sterically crowded 2,3,3,5‐tetrasubstituted‐4‐nitroisoxazolidines ( 3a , 3b , 3c , 3d , 3e , 3f ). Reaction course may be interpreted on the basis of nature of local, nucleophile–electrophile interactions. Moreover, density functional theory (DFT) simulations of reaction paths suggest that these reactions should be considered as polar, “one‐step two‐stage” cycloadditions. Subsequently, it has been found that similar reactions between ketonitrones and α‐substituted nitroalkenes do not allow to obtain the expected 2,3,3,4‐tetrasubstituted‐4‐nitroisoxazolidines.     

Metal-free sequential [3 + 2]-dipolar cycloadditions using cyclooctynes and 1,3-dipoles of different reactivity

Although metal-free cycloadditions of cyclooctynes and azides to give stable 1,2,3-triazoles have found wide utility in chemical biology and material sciences, there is an urgent need for faster and more versatile bioorthogonal reactions. We have found that nitrile oxides and diazocarbonyl derivatives undergo facile 1,3-dipolar cycloadditions with cyclooctynes. Cycloadditions with diazocarbonyl derivatives exhibited similar kinetics as compared to azides, whereas the reaction rates of cycloadditions with nitrile oxides were much faster. Nitrile oxides could conveniently be prepared by direct oxidation of the corresponding oximes with BAIB, and these conditions made it possible to perform oxime formation, oxidation, and cycloaddition as a one-pot procedure. The methodology was employed to functionalize the anomeric center of carbohydrates with various tags. Furthermore, oximes and azides provide an orthogonal pair of functional groups for sequential metal-free click reactions, and this feature makes it possible to multifunctionalize biomolecules and materials by a simple synthetic procedure that does not require toxic metal catalysts.     

Photoinitiation. V. Effect of medium polarity on the acrylonitrile polymerization photoinitiated by naphthalene

The heterogeneous polymerization of acrylonitrile photoinitiated by naphthalene is influenced by the polarity of the reaction medium. The rate of initiation increases with the increasing dielectric strength of the reaction medium. A similar trend is observable for Stern–Volmer constants of naphthalene fluorescence quenching by acrylonitrile. The ratio k_p/k_t^1/2 of the rate constant for propagation and termination reactions is not influenced by a change in the polarity of the reaction medium. The effect of viscosity on the value of k_p/k_t^1/2 known for polymerization in a homogeneous medium was not observed in the reaction systems studied.     

Entropic intermediates and hidden rate-limiting steps in seemingly concerted cycloadditions. Observation, prediction, and origin of an isotope effect on recrossing

An unusual intramolecular kinetic isotope effect (KIE) in the reaction of dichloroketene with cis-2-butene does not fit with a simple asynchronous cycloaddition transition state, but it can be predicted from trajectory studies on a bifurcating energy surface. The origin of the KIE is related to a high propensity for transition state recrossing in this system, with heavier masses recrossing less. The KIE can also be predicted by a statistical model that treats the cycloaddition as a stepwise mechanism, the rate-limiting second step being associated with an entropic barrier for formation of the second carbon-carbon bond. The relevance of this stepwise mechanism to other asynchronous but seemingly concerted cycloadditions is suggested by examination of organocatalytic Diels-Alder reactions.     

`Inverse‐Electron‐Demand' Diels‐Alder Reactions of (E)‐3‐Diazenylbut‐2‐enes in Water

The cycloadditions of (E)‐3‐diazenylbut‐2‐enes 1 with a variety of alkenes 2 – 6 were carried out in water as well as in organic solvents. The reactions were always faster in heterogeneous aqueous medium than in the organic solvents. These conjugated diazenyl‐alkenes behave mainly as heterodienes, and the Diels‐Alder adducts are the sole or at least main reaction products. Pyrroles derived from zwitterionic [3+2] cycloaddition reactions were observed in some cases. The cycloaddition of 1a with (+)‐2‐(ethenyloxy)‐3,7,7‐trimethylbicyclo[4.1.0]heptane ( 5 ) is the first example of an asymmetric `inverse electron‐demand' Diels‐Alder reaction carried out in pure water.     

Concerted vs stepwise mechanisms in dehydro-Diels-Alder reactions

The Diels-Alder reaction is not limited to 1,3-dienes. Many cycloadditions of enynes and a smaller number of examples with 1,3-diynes have been reported. These "dehydro"-Diels-Alder cycloadditions are one class of dehydropericyclic reactions which have long been used to generate strained cyclic allenes and other novel structures. CCSD(T)//M05-2X computational results are reported for the cycloadditions of vinylacetylene and butadiyne with ethylene and acetylene. Both concerted and stepwise diradical routes have been explored for each reaction, with location of relevant stationary points. Relative to 1,3-dienes, replacement of one double bond by a triple bond adds 6-6.5 kcal/mol to the activation barrier; a second triple bond adds 4.3-4.5 kcal/mol to the barrier. Product strain decreases the predicted exothermicity. In every case, a concerted reaction is favored energetically. The difference between concerted and stepwise reactions is 5.2-6.6 kcal/mol for enynes but diminishes to 0.5-2 kcal/mol for diynes. Experimental studies on intramolecular diyne + ene cycloadditions show two distinct reaction pathways, providing evidence for competing concerted and stepwise mechanisms. Diyne + yne cycloadditions connect with arynes and ethynyl-1,3-cyclobutadiene. This potential energy surface appears to be flat, with only a minute advantage for a concerted process; many diyne cycloadditions or aryne cycloreversions will proceed by a stepwise mechanism.     

Pd-catalyzed reaction of allyl carbonate with polyols: the role of CO2 in transesterification versus etherification of glycerol

An intermolecular Pd/PPh(3)-catalyzed transesterification of diallyl carbonate with glycerol to generate glycerol carbonate has been developed. Analysis of the reaction kinetics in THF indicates a first-order dependence on Pd and diallyl carbonate, that the Pd bears two phosphines during the turnover limiting event, and that increasing the glycerol concentration inhibits reaction, possibly via change in the polarity of the medium. (13)C isotopic labeling studies demonstrate that the Pd-catalyzed transesterification requires at least one allyl carbonate moiety and that there is rapid equilibrium of the allyl carbonate with CO(2) in solution, even when present only at low concentrations. A mechanism that is consistent with these results involves oxidative addition of the allyl carbonate to Pd followed by reversible decarboxylation, with the intermediate η(1)- and η(3)-allyl Pd alkoxides mediating direct and indirect transesterification reactions with the glycerol. Using this model, successful simulations of the kinetics of reactions conducted under atmospheres of N(2) or CO(2) could be achieved, including switching in selectivity between etherification and transesterification in the early stages of reaction. Reactions with the higher polyols threitol and erythritol are also efficient, generating the terminal (1,2) monocarbonates with high selectivity.     

1,3‐Dipolar Cycloadditions of Ethyl 2‐Diazo‐3,3,3‐trifluoropropanoate to Alkynes and [1,5] Sigmatropic Rearrangements of the Resulting 3H‐Pyrazoles: Synthesis of Mono‐, Bis‐ and Tris(trifluoromethyl)‐Substituted Pyrazoles

The 1,3‐dipolar cycloadditions of ethyl 2‐diazo‐3,3,3‐trifluoropropanoate with electron‐rich and electron‐deficient alkynes, as well as the van Alphen? Hüttel rearrangements of the resulting 3H‐pyrazoles were investigated. These reactions led to a series of CF₃‐substituted pyrazoles in good overall yields. Phenyl‐ and diphenylacetylene proved to be unreactive, but, at high temperature, the diazoalkane and phenylacetylene furnished a cyclopropene derivative. As expected, the 1,3‐dipolar cycloaddition to the ynamine occurred much faster than those to electron‐deficient alkynes. With one exception, all cycloadditions proceeded with excellent regioselectivities. The [1,5] sigmatropic rearrangement of the primary 3H‐pyrazoles provided products with shifted acyl groups; products resulting from the migration of a CF₃ group were not detected. In agreement with literature reports, this rearrangement occurs faster with 3H‐pyrazoles bearing electron‐withdrawing substituents.     

An experimental and computational investigation of the Diels-Alder cycloadditions of halogen-substituted 2(H)-pyran-2-ones

[reaction: see text] Diels-Alder reactions of 3- and 5-halo-subsituted 2(H)-pyran-2-ones with both electron-rich and electron-deficient dienophiles afford stable and readily isolable bridged bicyclic lactone cycloadducts. These cycloadditions proceed with excellent regioselectivity and very good stereoselectivity. In contrast, Diels-Alder reactions of 4-halo-subsituted 2(H)-pyran-2-ones afford cycloadducts which are very prone to loss of bridging CO(2) and the subsequent formation of barrelenes ([2.2.2]cyclooctenes). Furthermore, these cycloadditions proceed with only moderate regio- and stereoselectivity. For both series of the 3- and 5-halo-subsituted 2(H)-pyran-2-ones and 4-halo-subsituted 2(H)-pyran-2-ones, the reactivity patterns do not significantly change between the halogens. The regio- and stereochemical preferences of the cycloadditions of halo-substituted 2(H)-pyran-2-ones are investigated computationally. Calculations were carried out on the transition states leading to the four possible regio- and stereoisomeric cycloadducts by using density functional theory (B3LYP/6-31G). These studies allow prediction of the regio- and stereoselectivity in these reactions which are broadly in line with experimental observations.     

Continuous Flow Bioconjugations of NIR-AZA Fluorophores via Strained Alkyne Cycloadditions with Intra-Chip Fluorogenic Monitoring**

The importance of bioconjugation reactions continues to grow for cell specific targeting and dual therapeutic plus diagnostic medical applications. This necessitates the development of new bioconjugation chemistries, in-flow synthetic and analytical methods. With this goal, continuous flow bioconjugations were readily achieved with short residence times for strained alkyne substituted carbohydrate and therapeutic peptide biomolecules in reaction with azide and tetrazine substituted fluorophores. The strained alkyne substrates included substituted 2-amino-2-deoxy-α-D-glucopyranose, and the linear and cyclic peptide sequences QIRQQPRDPPTETLELEVSPDPAS-OH and c(RGDfK) respectively. The catalyst and reagent-free inverse electron demand tetrazine cycloadditions proved more favourable than the azide 1,3-dipolar cycloadditions. Reaction completion was achieved with residence times of 5 min at 40 °C for tetrazine versus 10 min at 80 °C for azide cycloadditions. The use of a fluorogenic tetrazine fluorophore, in a glass channelled reactor chip, allowed for intra-chip reaction monitoring by recording fluorescence intensities at various positions throughout the chip. As the Diels-Alder reactions proceeded through the chip, the fluorescence intensity increased accordingly in real-time. The application of continuous flow fluorogenic bioconjugations could offer an efficient translational access to theranostic agents.     

Aqueous enantioselective organocatalytic Diels-Alder reactions employing hydrazide catalysts. A new scaffold for organic acceleration

[reaction: see text] Cyclic hydrazides function as asymmetric organocatalysts in aqueous Diels-Alder reactions. The hydrazide is employed as the catalytic machinery in a compact camphor-derived framework that imparts facial selectivity to the cycloadditions. Kinetic evidence suggests the reaction involves rapid iminium formation.     

The Diels–Alder Reaction of 4,6‐Dinitrobenzofuroxan with 1‐Trimethylsilyloxybuta‐1,3‐diene: A Case Example of a Stepwise Cycloaddition

The reaction of 4,6‐dinitrobenzofuroxan (DNBF) with 1‐trimethylsilyloxybuta‐1,3‐diene ( 8 ) is shown to afford a mixture of [2+4] diastereomeric cycloadducts ( 10 , 11 ) through stepwise addition–cyclization pathways. Zwitterionic intermediate σ‐adduct 9 , which is involved in the processes, has been successfully characterized by ¹H and ¹³C NMR spectroscopy and UV/visible spectrophotometry in acetonitrile. A kinetic study has been carried out in this solvent that revealed that the rate of formation of 9 nicely fits the three‐parameter equation log k=s(E+N) developed by Mayr to describe the feasibility of nucleophile–electrophile combinations. This significantly adds to the NMR spectroscopic evidence that the overall cycloadditions take place through a stepwise mechanism. The reaction has also been studied in dichloromethane and toluene. In these less polar solvents, the stability of 9 is not sufficient to allow direct characterization by spectroscopic methods, but a kinetic investigation supports the view that stepwise processes are still operating. An informative comparison of our reaction with previous interactions firmly identified as prototype stepwise cycloadditions is made on the basis of the global electrophilicity index, ω, defined by Parr within the density functional theory, and highlighted by Domingo et al. as a powerful tool for understanding Diels–Alder reactions.     

Effect of solvent polarity on the rate of ozone reaction with unsaturated compounds

The effect of the polarity of seven solvents (? ≈ 2–60) on the rate of ozone reactions with stilbene and allyl chloride has been studied. The data show that the rate of the reaction is insensitive to the medium polarity. The results of earlier publications are revised and are shown to be in agreement with the present data.     

Ethylene polymerization reactions with Ziegler–Natta catalysts. I. Ethylene polymerization kinetics and kinetic mechanism

Kinetics of ethylene homopolymerization reactions and ethylene/1-hexene copolymerization reactions using a supported Ziegler–Natta catalyst was carried out over a broad range of reaction conditions. The kinetic data were analyzed using a concept of multicenter catalysis with different centers that respond differently to changes in reaction parameters. The catalyst contains five types of active centers that differ in the molecular weights of material they produce and in their copolymerization ability. In ethylene homopolymerization reactions, each active center has a high reaction order with respect to ethylene concentration, close to the second order. In ethylene/α-olefin copolymerization reactions, the centers that have poor copolymerization ability retain this high reaction order, whereas the centers that have good copolymerization ability change the reaction order to the first order. Hydrogen depresses activity of each type of center in the homopolymerization reactions in a reversible manner; however, the centers that copolymerize ethylene and α-olefins well are not depressed if an α-olefin is present in the reaction medium. Introduction of an α-olefin significantly increases activity of those centers, which are effective in copolymerizing it with ethylene but does not affect the centers that copolymerize ethylene and α-olefins poorly. To explain these kinetic features, a new reaction scheme is proposed. It is based on a hypothesis that the Ti—C₂H₅ bond in active centers has low reactivity due to the equilibrium formation of a Ti—C₂H₅ species with the H atom in the methyl group β-agostically coordinated to the Ti atom in an active center. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4255–4272, 1999     

A Surprising Solid-Phase Effect: Development of a Recyclable “Traceless” Linker System for Reactions on Solid Support

Triazenes as “traceless” linkers for solid-phase synthesis have been utilized for the attachment of arenes to a solid support and yield the corresponding products after various organometallic reactions (Heck reaction and asymmetric dihydroxylation, see the reaction scheme) and cycloadditions (Diels–Alder reaction). The triazene linker is distinguished by its accessibility, thermal robustness, and capability to undergo regeneration.     

Nitrous oxide as a 1,3-dipole: a theoretical study of its cycloaddition mechanism

The 1,3-dipolar cycloadditions of nitrous oxide and substituted alkynes have been studied at the B3LYP/6-31G(d,p) level. The reaction is controlled by LUMO (dipole)--HOMO (dipolarofile) and involves aromatic transition structures. The shape of the potential energy surface and the regioselectivity are not affected by the polarity of the solvents, except in the case of N2O + HC triple bond CSiH3. Different reactivity criteria including FMO coefficients product C, local softness differences Delta, magnetic susceptibility anisotropy chi(anis), and nucleus-independent chemical shifts NICS were used to predict the regioselectivity in all studied cases; the C, Delta criteria turn out to give the best results among them. The aromaticity of the transition structure is not a factor in determining the regiochemistry of the cycloaddtition reactions.     

C82与甲亚胺1,3-偶极环加成反应的理论研究

利用半经验PM3方法, 研究了C₈₂与甲亚胺叶立德1,3-偶极环加成反应的机理与区域选择性, 计算结果表明: C₈₂的1,3-偶极环加成反应遵循分步机理, 是一个放热反应; 反应活化能随着所加成键的键长增大而增加, 无论是从热力学还是从动力学方面考虑, 最优先加成的位置是键长最短、张力最大的键.     

Catalytic Enantioselective and Regioselective [3+3] Cycloadditions Using 2‐Indolylmethanols as 3 C Building Blocks

The first catalytic asymmetric cycloaddition using 2‐indolylmethanols as 3C building blocks has been established by a chiral phosphoric acid‐catalyzed enantioselective and regioselective [3+3] cycloaddition of 2‐indolylmethanols with azomethine ylides, which constructed biologically important tetrahydro‐γ‐carboline frameworks in high yields and excellent enantioselectivities (up to 83 % yield, 99:1 e.r.). This reaction not only represents the first application of 2‐indolylmethanols as 3C building blocks in catalytic asymmetric cycloadditions, but also has established an abnormal regioselectivity in indolylmethanol‐involved transformations.     

Role of Water in the Reaction Mechanism and endo/exo Selectivity of 1,3-Dipolar Cycloadditions Elucidated by Quantum Chemistry and Machine Learning

Asymmetric 1,3-dipolar cycloadditions of azomethine ylides with activated olefins are among the most important and versatile methods for the synthesis of enantioenriched pyrroline and pyrrolidine derivatives. Despite both theoretical and practical importance, the role of water molecules in the reactivity and endo/exo selectivity remains unclear. To explore how water accelerates the reactions and improves the endo/exo selectivity of the cycloadditions of 1,3-dipole phthalazinium-2-dicyanomethanide ( 1 ) and two dipolarophiles, an ab initio-quality neural network potential that overcomes the computational bottleneck of explicitly considering water molecules was used. It is demonstrated that not only the nature of both the dipolarophile and the 1,3-dipole, but also the solvent medium, can perturb or even alter the reaction mechanism. An extreme case was found for the reaction of 1,3-dipole 1 with methyl vinyl ketone, in which the reaction mechanism changes from a concerted to a stepwise mode on going from MeCN to H₂O as solvent, with formation of a zwitterionic intermediate that is a very shallow minimum on the energy surface. Thus, high stereocontrol can still be expected despite the stepwise nature of the mechanism. The results indicate that water can induce global polarization along the reaction coordinate and highlight the role of microsolvation effects and bulk-phase effects in reproducing the experimentally observed aqueous acceleration and enhanced endo/exo selectivity.