A three‐dimensional cadmium(II) coordination polymer: poly[[[μ‐4,4′‐(propane‐1,3‐diyl)dipyridine‐κ2N:N](μ‐3,3′‐thiodipropionato‐κ3O,O′:O)cadmium(II)] monohydrate]

In the title coordination polymer, {[Cd(C₆H₈O₄S)(C₁₃H₁₄N₂)]·H₂O}_n, the Cd^II atom displays a distorted octahedral coordination, formed by three carboxylate O atoms and one S atom from three different 3,3′‐thiodipropionate ligands, and two N atoms from two different 4,4′‐(propane‐1,3‐diyl)dipyridine ligands. The Cd^II centres are bridged through carboxylate O atoms of 3,3′‐thiodipropionate ligands and through N atoms of 4,4′‐(propane‐1,3‐diyl)dipyridine ligands to form two different one‐dimensional chains, which intersect to form a two‐dimensional layer. These two‐dimensional layers are linked by S atoms of 3,3′‐thiodipropionate ligands from adjacent layers to form a three‐dimensional network.     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).     

Reaction‐path calculations and crystal structures of 1,1′‐(ethylene‐1,2‐diyl)dipyridinium dichloride dihydrate and 1,1′‐(ethylene‐1,2‐diyl)dipyridinium dibromide

The design of new organic–inorganic hybrid ionic materials is of interest for various applications, particularly in the areas of crystal engineering, supramolecular chemistry and materials science. The monohalogenated intermediates 1‐(2‐chloroethyl)pyridinium chloride, C₅H₅NCH₂CH₂Cl⁺·Cl⁻, (I′), and 1‐(2‐bromoethyl)pyridinium bromide, C₅H₅NCH₂CH₂Br⁺·Br⁻, (II′), and the ionic disubstituted products 1,1′‐(ethylene‐1,2‐diyl)dipyridinium dichloride dihydrate, C₁₂H₁₄N₂²⁺·2Cl⁻·2H₂O, (I), and 1,1′‐(ethylene‐1,2‐diyl)dipyridinium dibromide, C₁₂H₁₄N₂²⁺·2Br⁻, (II), have been isolated as powders from the reactions of pyridine with the appropriate 1,2‐dihaloethanes. The monohalogenated intermediates (I′) and (II′) were characterized by multinuclear NMR spectroscopy, while (I) and (II) were structurally characterized using powder X‐ray diffraction. Both (I) and (II) crystallize with half the empirical formula in the asymmetric unit in the triclinic space group P. The organic 1,1′‐(ethylene‐1,2‐diyl)dipyridinium dications, which display approximate C2h symmetry in both structures, are situated on inversion centres. The components in (I) are linked via intermolecular O—H…Cl, C—H…Cl and C—H…O hydrogen bonds into a three‐dimensional framework, while for (II), they are connected via weak intermolecular C—H…Br hydrogen bonds into one‐dimensional chains in the [110] direction. The nucleophilic substitution reactions of 1,2‐dichloroethane and 1,2‐dibromoethane with pyridine have been investigated by ab initio quantum chemical calculations using the 6–31G** basis. In both cases, the reactions occur in two exothermic stages involving consecutive S_N2 nucleophilic substitutions. The isolation of the monosubstituted intermediate in each case is strong evidence that the second step is not fast relative to the first.     

A three‐dimensional ZnII coordination framework: poly[[μ2‐(E)‐1,2‐bis(pyridin‐4‐yl)ethene][μ4‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato][μ2‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato]dizinc(II)]

In the title coordination polymer, [Zn₂(C₁₄H₈N₂O₄)₂(C₁₂H₁₀N₂)]_n, the asymmetric unit contains one Zn^II cation, two halves of 2,2′‐(diazene‐1,2‐diyl)dibenzoate anions (denoted L²⁻) and half of a 1,2‐bis(pyridin‐4‐yl)ethene ligand (denoted bpe). The three ligands lie across crystallographic inversion centres. Each Zn^II centre is four‐coordinated by three O atoms of bridging carboxylate groups from three L²⁻ ligands and by one N atom from a bpe ligand, forming a tetrahedral coordination geometry. Two Zn^II atoms are bridged by two carboxylate groups of L²⁻ ligands, generating a [Zn₂(CO₂)₂] ring. Each loop serves as a fourfold node, which links its four equivalent nodes via the sharing of four L²⁻ ligands to form a two‐dimensional [Zn₂L₄]_n net. These nets are separated by bpe ligands acting as spacers, producing a three‐dimensional framework with a 4⁶6⁴ topology. Powder X‐ray diffraction and solid‐state photoluminescence were also measured.     

Cobalt(II) chloride complexes with 1,1′‐dimethyl‐4,4′‐bipyrazole featuring first‐ and second‐sphere coordination of the ligand

In catena‐poly[[dichloridocobalt(II)]‐μ‐(1,1′‐dimethyl‐4,4′‐bipyrazole‐κ²N²:N^2′)], [CoCl₂(C₈H₁₀N₄)]_n, (1), two independent bipyrazole ligands (Me₂bpz) are situated across centres of inversion and in tetraaquabis(1,1′‐dimethyl‐4,4′‐bipyrazole‐κN²)cobalt(II) dichloride–1,1′‐dimethyl‐4,4′‐bipyrazole–water (1/2/2), [Co(C₈H₁₀N₄)₂(H₂O)₄]Cl₂·2C₈H₁₀N₄·2H₂O, (2), the Co²⁺ cation lies on an inversion centre and two noncoordinated Me₂bpz molecules are also situated across centres of inversion. The compounds are the first complexes involving N,N′‐disubstituted 4,4′‐bipyrazole tectons. They reveal a relatively poor coordination ability of the ligand, resulting in a Co–pyrazole coordination ratio of only 1:2. Compound (1) adopts a zigzag chain structure with bitopic Me₂bpz links between tetrahedral Co^II ions. Interchain interactions occur by means of very weak C—H...Cl hydrogen bonding. Complex (2) comprises discrete octahedral trans‐[Co(Me₂bpz)₂(H₂O)₄]²⁺ cations formed by monodentate Me₂bpz ligands. Two equivalents of additional noncoordinated Me₂bpz tectons are important as `second‐sphere ligands' connecting the cations by means of relatively strong O—H...N hydrogen bonding with generation of doubly interpenetrated pcu (α‐Po) frameworks. Noncoordinated chloride anions and solvent water molecules afford hydrogen‐bonded [(Cl⁻)₂(H₂O)₂] rhombs, which establish topological links between the above frameworks, producing a rare eight‐coordinated uninodal net of {4²⁴.5.6³} ( ilc ) topology.     

Electrochemical Reduction of 4,4′‐(2,2,2‐Trichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDT) and 4,4′‐(2,2‐Dichloroethane‐1,1‐diyl)‐ bis(chlorobenzene) (DDD) at Carbon Cathodes in Dimethylformamide

In dimethylformamide containing tetramethylammonium tetrafluoroborate, cyclic voltammograms for reduction of 4,4′‐(2,2,2‐trichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDT) at a glassy carbon cathode exhibit five waves, whereas three waves are observed for the reduction of 4,4′‐(2,2‐dichloroethane‐1,1‐diyl)bis(chlorobenzene) (DDD). Bulk electrolyses of DDT and DDD afford 4,4′‐(ethene‐1,1‐diyl)bis(chlorobenzene) (DDNU) as principal product (67–94%), together with 4,4′‐(2‐chloroethene‐1,1‐diyl)bis(chlorobenzene) (DDMU), 1‐chloro‐4‐styrylbenzene, and traces of both 1,1‐diphenylethane and 4,4′‐(ethane‐1,1‐diyl)bis(chlorobenzene) (DDO). For electrolyses of DDT and DDD, the coulometric n values are essentially 4 and 2, respectively. When DDT is reduced in the presence of a large excess of D₂O, the resulting DDNU and DDMU are almost fully deuterated, indicating that reductive cleavage of the carbon–chlorine bonds of DDT is a two‐electron process that involves carbanion intermediates. A mechanistic scheme is proposed to account for the formation of the various products.     

A three‐dimensional PbII coordination framework: poly[[μ4‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato]dimethanollead(II)]

In the title coordination polymer, [Pb(C₁₄H₈N₂O₄)(CH₃OH)₂]_n, the asymmetric unit contains half of a Pb^II cation, half of a 2,2′‐(diazene‐1,2‐diyl)dibenzoate dianionic ligand (denoted L²⁻) and one methanol ligand. Each Pb^II centre is eight‐coordinated by six O atoms of chelating/bridging carboxylate groups from four L²⁻ ligands and two O atoms from two terminal methanol ligands, forming a distorted dodecahedron. The [PbL₂(MeOH)₂] subunits are interlinked via the sharing of two carboxylate O atoms to form a one‐dimensional [PbL₂(MeOH)₂]_n chain. Adjacent chains are further connected by L²⁻ ligands, giving rise to a two‐dimensional layer, and these layers are bridged by L²⁻ linkers to afford a three‐dimensional framework with a 4¹²6³ topology.     

The three‐dimensional coordination polymer poly[[aqua[μ4‐2,2′‐(diazene‐1,2‐diyl)dibenzoato]lead(II)] 1,2‐bis(pyridin‐4‐yl)ethylene hemisolvate]

A novel three‐dimensional coordination polymer, {[Pb(C₁₄H₈N₂O₄)(H₂O)]·0.5C₁₂H₁₀N₂}_n, has been synthesized by hydrothermal reaction of Pb(OAc)₂·3H₂O (OAc is acetate), 2,2′‐(diazene‐1,2‐diyl)dibenzoic acid (H₂L) and 1,2‐bis(pyridin‐4‐yl)ethylene (bpe). The asymmetric unit contains a crystallographically independent Pb^II cation, one L²⁻ ligand, an aqua ligand and half a bpe molecule. Each Pb^II centre is seven‐coordinated by six O atoms of bridging–chelating carboxylate groups from L²⁻ ligands and by one O atom from a coordinated water molecule. The Pb^II cations are bridged by L²⁻ ligands, forming [PbO₂]_n chains along the a axis. These chains are further connected by L²⁻ ligands along the b and c axes to give a three‐dimensional framework with a 4¹²6³ topology. The channel voids are occupied by bpe molecules.     

A two‐dimensional copper(II) coordination polymer based on 2,4′‐oxybis(benzoate) and 4,4′‐bipyridine

The reaction of Cu(NO₃)₂·3H₂O with 2,4′‐oxybis(benzoic acid) and 4,4′‐bipyridine under hydrothermal conditions produced a new mixed‐ligand two‐dimensional copper(II) coordination polymer, namely poly[[(μ‐4,4′‐bipyridine‐κ²N ,N ′)[μ‐2,4′‐oxybis(benzoato)‐κ⁴O ²,O ^2′:O ⁴,O ^4′]copper(II)] monohydrate], {[Cu(C₁₄H₈O₅)(C₁₀H₈N₂)]·H₂O}_n , which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction. The X‐ray diffraction crystal structure analysis reveals that the Cu^II ions are connected to form a two‐dimensional wave‐like network through 4,4′‐bipyridine and 2,4′‐oxybis(benzoate) ligands. The two‐dimensional layers are expanded into a three‐dimensional supramolecular structure through intermolecular O—H…O and C—H…O hydrogen bonds. Furthermore, magnetic susceptibility measurements indicate that the complex shows weak antiferromagnetic interactions between adjacent Cu^II ions.     

A new two‐dimensional CoII coordination polymer based on bis[4‐(2‐methyl‐1H‐imidazol‐1‐yl)phenyl] ether and biphenyl‐4,4′‐diyldicarboxylic acid: synthesis,crystal structure and photocatalytic degradation activity

A novel two‐dimensional Co^II coordination framework, namely poly[(μ₂‐biphenyl‐4,4′‐diyldicarboxylato‐κ²O⁴:O^4′){μ₂‐bis[4‐(2‐methyl‐1H‐imidazol‐1‐yl)phenyl] ether‐κ²N³:N^3′}cobalt(II)], [Co(C₁₄H₈O₄)(C₂₀H₁₈N₄O)]_n, has been prepared and characterized by IR, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. The crystal structure reveals that the compound has an achiral two‐dimensional layered structure based on opposite‐handed helical chains. In addition, it exhibits significant photocatalytic degradation activity for the degradation of methylene blue.     

A threefold interpenetrated two‐dimensional zinc(II) supramolecular architecture based on 3‐nitrobenzoic acid and 4,4′‐bipyridine

With regard to crystal engineering, building block or modular assembly methodologies have shown great success in the design and construction of metal–organic coordination polymers. The critical factor for the construction of coordination polymers is the rational choice of the organic building blocks and the metal centre. The reaction of Zn(OAc)₂·2H₂O (OAc is acetate) with 3‐nitrobenzoic acid (HNBA) and 4,4′‐bipyridine (4,4′‐bipy) under hydrothermal conditions produced a two‐dimensional zinc(II) supramolecular architecture, catena‐poly[[bis(3‐nitrobenzoato‐κ²O,O′)zinc(II)]‐μ‐4,4′‐bipyridine‐κ²N:N′], [Zn(C₇H₄NO₄)₂(C₁₀H₈N₂)]_n or [Zn(NBA)₂(4,4′‐bipy)]_n, which was characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis and single‐crystal X‐ray diffraction analysis. The Zn^II ions are connected by the 4,4′‐bipy ligands to form a one‐dimensional zigzag chain and the chains are decorated with anionic NBA ligands which interact further through aromatic π–π stacking interactions, expanding the structure into a threefold interpenetrated two‐dimensional supramolecular architecture. The solid‐state fluorescence analysis indicates a slight blue shift compared with pure 4,4′‐bipyridine and HNBA.     

A zinc(II) metal–organic framework with a novel topology formed from 4,4′,4′′‐nitrilotribenzoate and 4,4′‐bipyridine ligands

A metal–organic framework with a novel topology, poly[sesqui(μ₂‐4,4′‐bipyridine)bis(dimethylformamide)bis(μ₄‐4,4′,4′′‐nitrilotribenzoato)trizinc(II)], [Zn₃(C₂₁H₁₂NO₆)₂(C₁₀H₈N₂)_1.5(C₃H₇NO)₂]_n, was obtained by the solvothermal method using 4,4′,4′′‐nitrilotribenzoic acid and 4,4′‐bipyridine (bipy). The structure, determined by single‐crystal X‐ray diffraction analysis, possesses three kinds of crystallographically independent Zn^II cations, as well as binuclear Zn₂(COO)₄(bipy)₂ paddle‐wheel clusters, and can be reduced to a novel topology of a (3,3,6)‐connected 3‐nodal net, with the Schläfli symbol {5.6²}₄{5².6}₄{5⁸.8⁷} according to the topological analysis.     

Topological identification of the first uninodal 8‐connected lsz MOF built from 2,2′‐difluorobiphenyl‐4,4′‐dicarboxylate pillars and cadmium(II)–triazolate layers

Using polynuclear metal clusters as nodes, many high‐symmetry high‐connectivity nets, like 8‐connnected bcu and 12‐connected fcu , have been attained in metal–organic frameworks (MOFs). However, construction of low‐symmetry high‐connected MOFs with a novel topology still remains a big challenge. For example, a uninodal 8‐connected lsz network, observed in inorganic ZrSiO₄, has not been topologically identified in MOFs. Using 2,2′‐difluorobiphenyl‐4,4′‐dicarboxylic acid (H₂L) as a new linker and 1,2,4‐triazole (Htrz) as a coligand, a novel three‐dimensional Cd^II–MOF, namely poly[tetrakis(μ₄‐2,2′‐difluorobiphenyl‐4,4′‐dicarboxylato‐κ⁵O¹,O^1′:O^1′:O⁴:O^4′)tetrakis(N,N‐dimethylformamide‐κO)tetrakis(μ₃‐1,2,4‐triazolato‐κ³N¹:N²:N⁴)hexacadmium(II)], [Cd₆(C₁₄H₆F₂O₄)₄(C₂H₂N₃)₄(C₃H₇NO)₄]_n, (I), has been prepared. Single‐crystal structure analysis indicates that six different Cd^II ions co‐exist in (I) and each Cd^II ion displays a distorted [CdO₄N₂] octahedral geometry with four equatorial O atoms and two axial N atoms. Three Cd^II ions are connected by four carboxylate groups and four trz⁻ ligands to form a linear trinuclear [Cd₃(COO)₄(trz)₄] cluster, as do the other three Cd^II ions. Two Cd₃ clusters are linked by trz⁻ ligands in a μ_1,2,4‐bridging mode to produce a two‐dimensional Cd^II–triazolate layer with (6,3) topology in the ab plane. These two‐dimensional layers are further pillared by the L²⁻ ligands along the c axis to generate a complicated three‐dimensional framework. Topologically, regarding the Cd₃ cluster as an 8‐connected node, the whole architecture of (I) is a uninodal 8‐connected lsz framework with the Schläfli symbol (4²²·6⁶). Complex (I) was further characterized by elemental analysis, IR spectroscopy, powder X‐ray diffraction, thermogravimetric analysis and a photoluminescence study. MOF (I) has a high thermal and water stability.     

A two‐dimensional CdII coordination polymer with 2,2′‐(disulfanediyl)dibenzoate and 1,10‐phenanthroline ligands

In poly[[μ₃‐2,2′‐(disulfanediyl)dibenzoato‐κ⁵O:O,O′:O′′,O′′′](1,10‐phenanthroline‐κ²N,N′)cadmium(II)], [Cd(C₁₄H₈O₄S₂)(C₁₂H₈N₂)]_n, the asymmetric unit contains one Cd^II cation, one 2,2′‐(disulfanediyl)dibenzoate anion (denoted dtdb²⁻) and one 1,10‐phenanthroline ligand (denoted phen). Each Cd^II centre is seven‐coordinated by five O atoms of bridging/chelating carboxylate groups from three dtdb²⁻ ligands and by two N atoms from one phen ligand, forming a distorted pentagonal–bipyramidal geometry. The Cd^II cations are bridged by dtdb²⁻ anions to give a two‐dimensional (4,4) layer. The layers are stacked to generate a three‐dimensional supramolecular architecture via a combination of aromatic C—H...π and π–π interactions. The thermogravimetric and luminescence properties of this compound were also investigated.     

Two coordination polymers constructed by 5‐[(4‐carboxyphenoxy)methyl]benzene‐1,3‐dicarboxylic acid and 2,2′‐bipyridine: syntheses,structures and luminescence properties

Coordination polymers (CPs) have attracted increasing interest in recent years. In this work, two new CPs, namely poly[[aquabis(2,2′‐bipyridine‐κ²N,N′){μ₃‐5‐[(4‐carboxylatophenoxy)methyl]benzene‐1,3‐dicarboxylato‐κ⁴O¹,O^1′:O³:O⁵}(μ‐formato‐κ³O:O,O′)dicadmium(II)] monohydrate], {[Cd₂(C₁₆H₉O₇)(HCO₂)(C₁₀H₈N₂)₂(H₂O)]·H₂O}_n ( 1 ), and poly[[(2,2′‐bipyridine‐κ²N,N′){μ₃‐5‐[(4‐carboxylphenoxy)methyl]benzene‐1,3‐dicarboxylato‐κ⁴O¹,O^1′:O³:O⁵}manganese(II)] sesquihydrate], {[Mn(C₁₆H₁₀O₇)(C₁₀H₈N₂)]·1.5H₂O}_n ( 2 ), have been prepared using the tricarboxylic acid 5‐[(4‐carboxyphenoxy)methyl]benzene‐1,3‐dicarboxylic acid and 2,2′‐bipyridine under hydrothermal conditions. CP 1 displays a two‐dimensional layer structure which is further extended into a three‐dimensional (3D) supramolecular structure via intermolecular π–π interactions, while CP 2 shows a different 3D supramolecular structure extended from one‐dimensional ladder chains by intermolecular π–π interactions. In addition, the solid‐state luminescence spectra of 1 and 2 were studied at room temperature.     

Three isomorphous Ln complexes: {[Ln2(bt)6(bno)(H2O)4]·bno}n (bt is but‐2‐enoate and bno is 4,4′‐bipyridyl N,N′‐dioxide), with Ln = Nd,Er and Y

The polymeric title compounds, namely catena‐poly[[[di‐μ‐but‐2‐enoato‐κ³O:O,O′;κ³O,O′:O′‐bis[diaquadibut‐2‐enoato‐κO;κ²O,O′‐neodymium(III)]]‐μ‐4,4′‐bipyridyl N,N′‐dioxide‐κ²O:O′] 4,4′‐bipyridyl N,N′‐dioxide solvate] and the erbium(III) and yttrium(III) analogues, {[Ln₂(C₄H₅O₂)₆(C₁₀H₈N₂O₂)(H₂O)₄]·C₁₀H₈N₂O₂}_n (Ln = Nd, Er and Y), form from [Ln₂(bt)₆(H₂O)₄] dimers (bt is but‐2‐enoate) bridged by 4,4′‐bipyridyl dioxide (bno) spacers into sets of parallel chains; these linear arrays are interconnected by aqua‐mediated hydrogen bonds into broad two‐dimensional structures, which in turn interact with each other though the hydrogen‐bonded bridged bno solvent units. Both independent bno units in the structures are bisected by symmetry centres.     

A three‐dimensional ZnII coordination polymer constructed from 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands exhibiting photoluminescence

Ligands based on polycarboxylic acids are excellent building blocks for the construction of coordination polymers; they may bind to a variety of metal ions and form clusters, as well as extended chain or network structures. Among these building blocks, biphenyltetracarboxylic acids (H₄bpta) with C ₂ symmetry have recently attracted attention because of their variable bridging and multidentate chelating modes. The new luminescent three‐dimensional coordination polymer poly[(μ₅‐1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylato)bis[μ₂‐1,4‐bis(1H‐imidazol‐1‐yl)benzene]dizinc(II)], [Zn₂(C₁₆H₆O₈)(C₁₂H₁₀N₄)]_n , was synthesized solvothermally and characterized by single‐crystal X‐ray diffraction, elemental analysis and IR spectroscopy. The crystal structure contains two crystallographically independent Zn^II cations. Both metal cations are located on twofold axes and display distorted tetrahedral coordination geometries. Neighbouring Zn^II centres are bridged by carboxylate groups in the syn –anti mode to form one‐dimensional chains. Adjacent chains are linked through 1,1′‐biphenyl‐2,2′,4,4′‐tetracarboxylate and 1,4‐bis(1H‐imidazol‐1‐yl)benzene ligands to form a three‐dimensional network. In the solid state, the compound exhibits blue photoluminescence and represents a promising candidate for a thermally stable and solvent‐resistant blue fluorescent material.     

Masking of Lewis acidity trends in the solid‐state structures of trichlorido‐ and tribromido(2,2′:6′,2′′‐terpyridine‐κ3N,N′,N′′)gallium(III)

The molecular structures of trichlorido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaCl₃(C₁₅H₁₁N₃)], and tribromido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaBr₃(C₁₅H₁₁N₃)], are isostructural, with the Ga^III atom displaying an octahedral geometry. It is shown that the Ga—N distances in the two complexes are the same within experimental error, in contrast to expected bond lengthening in the bromide complex due to the lower Lewis acidity of GaBr₃. Thus, masking of the Lewis acidity trends in the solid state is observed not only for complexes of group 13 metal halides with monodentate ligands but for complexes with the polydentate 2,2′:6′,2′′‐terpyridine donor as well.     

Mixed‐ligand MnII and CuII complexes with alternating 2,2′‐bipyrimidine and terephthalate bridges

The novel polymeric complexes catena‐poly[[diaquamanganese(II)]‐μ‐2,2′‐bipyrimidine‐κ⁴N¹,N^1′:N³,N^3′‐[diaquamanganese(II)]‐bis(μ‐terephthalato‐κ²O¹:O⁴)], [Mn₂(C₈H₄O₄)₂(C₈H₆N₄)(H₂O)₄]_n, (I), and catena‐poly[[[aquacopper(II)]‐μ‐aqua‐μ‐hydroxido‐μ‐terephthalato‐κ²O¹:O^1′‐copper(II)‐μ‐aqua‐μ‐hydroxido‐μ‐terephthalato‐κ²O¹:O^1′‐[aquacopper(II)]‐μ‐2,2′‐bipyrimidine‐κ⁴N¹,N^1′:N³,N^3′] tetrahydrate], {[Cu₃(C₈H₄O₄)₂(OH)₂(C₈H₆N₄)(H₂O)₄]·4H₂O}_n, (II), containing bridging 2,2′‐bipyrimidine (bpym) ligands coordinated as bis‐chelates, have been prepared via a ligand‐exchange reaction. In both cases, quite unusual coordination modes of the terephthalate (tpht²⁻) anions were found. In (I), two tpht²⁻ anions acting as bis‐monodentate ligands bridge the Mn^II centres in a parallel fashion. In (II), the tpht²⁻ anions act as endo‐bridges and connect two Cu^II centres in combination with additional aqua and hydroxide bridges. In this way, the binuclear [Mn₂(tpht)₂(bpym)(H₂O)₄] entity in (I) and the trinuclear [Cu₃(tpht)₂(OH)₂(bpym)(H₂O)₄]·4H₂O coordination entity in (II) build up one‐dimensional polymeric chains along the b axis. In (I), the Mn^II cation lies on a twofold axis, whereas the four central C atoms of the bpym ligand are located on a mirror plane. In (II), the central Cu^II cation is also on a special position (site symmetry ). In the crystal structures, the packing of the chains is further strengthened by a system of hydrogen bonds [in both (I) and (II)] and weak face‐to‐face π–π interactions [in (I)], forming three‐dimensional metal–organic frameworks. The Mn^II cation in (I) has a trigonally deformed octahedral geometry, whereas the Cu^II cations in (II) are in distorted octahedral environments. The Cu^II polyhedra are inclined relative to each other and share common edges.     

Effect of pH on the charge‐assisted hydrogen‐bonded assembly of the anionic [Cu(oxalate)2]2− building unit and N,N′‐ditopic cations

By the solvothermal reaction under acidic conditions of Cu(NO₃)₂·3H₂O, Na₂C₂O₄ and the N,N′‐ditopic organic coligands 1‐(pyridin‐4‐yl)piperazine (ppz) and 1,2‐bis(pyridin‐4‐yl)ethane (bpa), two novel anionic copper(II) coordination compounds were obtained, namely the one‐dimensional coordination polymer catena‐poly[4‐(pyridin‐1‐ium‐4‐yl)piperazin‐1‐ium [[(oxalato‐κ²O¹,O²)copper(II)]‐μ‐oxalato‐κ³O¹,O²:O^1′]], {(C₉H₁₅N₃)[Cu(C₂O₄)₂)]}_n or {(H₂ppz)[Cu(C₂O₄)₂]}_n, (I), and the discrete ionic complex 4,4′‐(ethane‐1,2‐diyl)dipyridinium bis(oxalato‐κ²O¹,O²)copper(II), (C₁₂H₁₄N₂)[Cu(C₂O₄)₂] or (H₂bpa)[Cu(C₂O₄)₂], (II). The products were characterized by single‐crystal X‐ray diffraction, elemental analysis, powder X‐ray diffraction, thermogravimetric analyses and UV and IR spectroscopic techniques. The [Cu(C₂O₄)₂]²⁻ units for (I) and (II) are stabilized by H₂ppz²⁺ and H₂bpa²⁺ cations, respectively, via charge‐assisted hydrogen bonds. Also, a study of the pH‐controlled synthesis of this system shows that (I) was obtained at pH values of 2–4. When using bpa, a two‐dimensional square‐grid network of [Cu(C₂O₄)(bpa)]_n was obtained at a pH of 4. This indicates that the pH of the reaction also plays a key role in the structural assembly and coordination abilities of oxalate and N,N′‐ditopic coligands.