Fe3O4@silica‐MCM‐41@DABCO: A novel magnetically reusable nanostructured catalyst for clean in situ synthesis of substituted 2‐aminodihydropyrano[3,2‐b]pyran‐3‐cyano

DABCO (1,4‐diazabicyclo[2.2.2]octane)‐modified magnetite with silica‐MCM‐41 shell (Fe₃O₄@silica‐MCM‐41@DABCO) as an effective, magnetic and novel heterogeneous reusable nanocatalyst was synthesized and analysed using various techniques. Evaluation of the catalytic activity of this nanocatalyst was performed in the clean synthesis of substituted 2‐aminodihydropyrano[3,2‐b]pyran‐3‐cyano in high yields via in situ reaction of azido kojic acid, malononitrile and various aldehydes.     

Synthesis and Luminescence of Eu‐N2,N6‐Bis(2‐hydroxyethyl)pyridine‐2,6‐dicarboxamide Complexes Containing Mesoporous Material

Ligand N²,N⁶‐bis(2‐hydroxyethyl)pyridine‐2,6‐dicarboxamide (L=BHPC) was synthesized and used to construct lanthanide‐based mesoporous material Eu‐L‐MCM‐41. In the structure of resulting Eu‐L‐MCM‐41, Eu³⁺ was chelated by BHPC, and the Eu‐L complexes were anchored into the forming MCM‐41 host by the reaction between the hydroxyl group and active Si‐OH. The mesoporous material Eu‐L‐MCM‐41 was characterized by UV, IR, small‐angle X‐ray diffraction (SAXRD) patterns, nitrogen adsorption/desorption isotherms, TGA and fluorescence spectra. The results indicate that ligand and Eu³⁺ have been introduced into the MCM‐41 host, and Eu‐L‐MCM‐41 exhibits characteristic luminescence of Eu³⁺.     

A Cheap and Efficient Methodology for the Solvent‐Free,One‐pot and Multi‐component Synthesis of 3,4‐Dihydropyrimidin‐2(1H)‐ones Catalyzed by Mesoporous NH4H2PO4/MCM‐48 and Comparison of Its Catalytic Efficacy with NH4H2PO4/MCM‐41

The catalytic efficiency of ammonium dihydrogenphosphate was evaluated in the two heterogeneous forms of NH₄H₂PO₄/MCM‐48 and NH₄H₂PO₄/MCM‐41, as mesoporous catalysts, in the solvent free synthesis of 3,4‐dihydropyrimidin‐2(1H)‐ones through one‐pot three‐component condensation of ethyl acetoacetate, an aryl aldehyde and urea. Different reaction parameters including catalytic efficacy, solvent effect, and urea concentration are considered.     

Copper(I)‐N2S2‐salen type complex covalently anchored onto MCM‐41 silica: an efficient and reusable catalyst for the A3‐coupling reaction toward propargylamines

The immobilization of copper complexes by covalent anchoring of the ligand on the surface of mesoporous MCM‐41 has been described. Bis[2‐(phenylthio)benzylidene]‐1,2‐ethylenediamine as a new N₂S₂ donor salen‐type ligand was covalently anchored onto nanopores of MCM‐41 coordinated with copper (I) halide. The organic–inorganic hybrid material was achieved readily using 3‐mercaptopropyltrimethoxysilane as a reactive surface modifier. 2‐Nitrobenzaldehyde was reacted smoothly with the thiol moieties in order to form functionalized nanoporous silica with carbaldehyde groups. The resulting supported organic moieties were converted to thiosalen ligand and coordinated with CuX (X = CN, Cl, Br, I). Characterization of the heterogeneous catalyst by X‐ray diffraction, N₂ sorption, FT‐IR, diffuse reflectance UV‐visible and TGA techniques indicated successful grafting of the copper complex inside the nano‐channels of MCM‐41. The heterogenized catalyst was evaluated by the Mannich condensation reaction of aldehydes, amines and alkynes. In this reaction, the corresponding propargylamines were obtained as single products in good to excellent yields. Factors such as reaction temperature, solvent, catalyst loading, leaching and reusability of the catalyst also were discussed. The use of MCM‐41 as support permits an easier separation and recycles with only a marginal decrease in reactivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Biodegradable polyester/modified mesoporous silica composites for effective bone repair with self‐reinforced properties

A series novel composites based on poly(_L‐lactide) (PLLA) oligomer modified mesoporous silica (MCM41) homogeneous dispersed into poly(_L‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer has been successfully prepared. The structure of PLTG terpolymer was characterized by ¹H NMR. The structure and properties of modified and unmodified MCM41 were attested by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), X‐ray diffraction (XRD), N₂ adsorption–desorption, scanning electron microscope (SEM), and transmission electron microscope (TEM), which demonstrated that the MCM41 was successfully grafted by the PLLA oligomer. The effect of different concentration of modified MCM41 in PLTG matrix on thermal properties, mechanical properties, and hydrophilicity was investigated by TGA, differential scanning calorimetry (DSC), mechanical testing, contact angle measurement, and SEM. The results of mechanical tests showed that 5 wt% of modified MCM41 nanoparticles gave rise to optimal reinforcing effect. The tensile strength, Young's modulus, and elongation at break of the PLTG/PLLA‐MCM41 (5%) composites were 33.2 Mpa, 1.58 Gpa, and 268.7%, respectively, which were all higher than the PLTG/MCM41 (5%) composites and pristine PLTG matrix, which were due to good interfacial adhesion between the PLTG matrix and MCM41 nanoparticles. TGA and DSC have shown that 5% modified MCM41 in the PLTG increased the temperature of composite degradation and T_g. Water contact angle measurement showed the hydrophilicity of the composites increases with the increase of modified MCM41 content. The live/dead assay showed that the modified MCM41 existing on the PLTG matrix presents very excellent cytocompatibility. Therefore, the novel composite material represents promising way for bone tissue engineering application.     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

Synthesis and characterization of MCM‐41‐Biurea‐Pd as a heterogeneous nanocatalyst and using its catalytic efficacy in C–C,C–N and C–O coupling reactions

MCM‐41‐Biurea‐Pd is introduced as a new, heterogeneous and reusable catalyst for C–C and C–heteroatom bond formation between various aryl halides, phenols and amines, in the presence of Ph₃SnCl (Stille reaction) in PEG‐400 as a green solvent at room temperature. The structure of the functionalized MCM‐41 was analysed using various techniques.     

Synthesis,Characterization and Catalysis of Ce‐MCM‐41

The cerium‐containing MCM‐41 (Ce‐MCM‐41) has been synthesized by direct hydrothermal method. The low‐angle XRD patterns revealed the typical five major peaks of MCM‐41 type hexagonal structures. The interplanar spacing d₁₀₀ = 38.4 Å was obtained that can be indexed on a hexagonal unit cell parameter with a_o = 44.3 Å which was larger than that of pure siliceous MCM‐41 (Si‐MCM‐41). Transmission electron micrograph shows the regular hexagonal array of uniform channel characteristics of MCM‐41. The BET surface area of Ce‐MCM‐41 was 840 m²/g, which is much reduced as compared to that of Si‐MCM‐41, with the pore size of 26.9 Å and mesopore volume of 0.78 cm³/g were measured by nitrogen adsorption‐desorption isotherm at 77 K. Along with the results, the synthesized Ce‐MCM‐41 exhibited a well‐ordered MCM‐41‐type mesoporous structure with the incorporation of cerium. Using Ce‐MCM‐41 as a support, the Rh (0.5 wt%) catalyst exhibited very high activity for the NO/CO reactions.     

Efficient Liquid‐Phase Oxidation of Diphenylmethane to Benzophenone over Vanadium‐Containing MCM‐41 Catalysts

The liquid‐phase oxidation of diphenylmethane with tert‐butylhydroperoxide has been studied using vanadium‐containing MCM‐41 materials, which were prepared by direct hydrothermal (V‐MCM‐41) and wet impregnation (V/MCM‐41) methods. These catalysts were characterized in detail by ICP‐AES, N₂‐sorption, XRD, FT‐IR, ²⁹Si and ⁵¹V NMR, TPD of ammonia, TPR of hydrogen, and chemisorption of oxygen. Both series of catalyst show good catalytic results, which are attributed to their highly ordered mesoporous structure, large BET surface area as well as the presence of easily accessible vanadium‐oxygen species as active centers in the catalyst. Further, V‐MCM‐41 exhibit superior catalytic activity (based on turnover number) than V/MCM‐41 mainly due to well‐dispersed tetrahedral vanadium‐oxygen species with higher oxidation ability. The effect of reaction parameters, i.e., temperature, time, solvent, etc. were investigated. Catalyst recycling test reveals good stability with only slight extent of leaching during the reaction.     

A Nickel‐Diamine/Mesoporous Silica Composite as a Heterogeneous Chiral Catalyst for Asymmetric 1,4‐Addition Reactions

A chiral composite material, derived from the deposition of a chiral nickel–diamine complex via wet impregnation to MCM‐41, was shown to be an efficient heterogeneous catalyst for asymmetric 1,4‐addition reactions of 1,3‐dicarbonyl compounds with nitroalkenes, and of nitromethane with alkylidenemalonates. It was discovered that MCM‐41 enhanced the reactivity and improved the stability of the chiral nickel complex that resides within the mesoporous material.     

Photovoltaic activity of Ti/MCM‐41

Ti/MCM‐41 is a well‐known heterogeneous catalyst for alkene epoxidation with organic peroxides. This titanosilicate contains isolated titanium atoms forming part of a framework of mesoporous silica whose structure is formed by parallel hexagonal channels 3.2 nm in diameter. The surface area and porosity of Ti/MCM‐41 are about 880 m² g^?1 and 0.70 cm³ g^?1, respectively. These values are among the highest for any material. Herein, we show that Ti/MCM‐41 exhibits photovoltaic activity. Dye‐sensitized solar cells using mesoporous Ti/MCM‐41 (2.8–5.7 % Ti content) as active layer, black dye N3 as photosensitizer and I₃^?/I^? in methoxyacetonitrile as electrolyte exhibit a V_OC, J_SC and FF of 0.44 V, 0.045 mA cm^?2 and 0.33, respectively. These values compare well against 0.75 V, 4.1 mA cm^?2 and 0.64, respectively, measured for analogous solar cells using conventional P‐25 TiO₂. However, the specific current density (J_SC/Ti atom) for the Ti/MCM‐41 is very similar to that of P25 TiO₂.     

Palladium chloride anchored on organic functionalized MCM‐41 as a catalyst for the Heck reaction

Palladium chloride was grafted to amino‐functionalized MCM‐41 to prepare heterogeneous catalysts. XRD, N₂ adsorption–desorption isotherms, IR, ¹³C and ²⁹Si cross‐polarization magic‐angle spinning NMR spectroscopy and XPS techniques were employed to characterize the catalytic materials. The heterogeneous palladium catalyst exhibited excellent catalytic activity for the Heck vinylation of iodobenzene with methyl acrylate, giving 92% yield of methyl cinnamate in the presence of N‐methylpyrrolidone (NMP) and triethylamine (Et₃N). The stability of the heterogeneous catalyst was also studied in detail. The catalytic tests showed that the palladium leaching correlated to solvent, base and palladium loading. The heterogeneous catalyst exhibited excellent stability towards loss of activity and palladium leaching was not observed during six recycles in the presence of toluene and Na₂CO₃. Copyright © 2007 John Wiley & Sons, Ltd.     

Palladium 2‐mercapto‐N‐propylacetamide complex anchored onto MCM‐41 as efficient and reusable nanocatalyst for Suzuki,Stille and Heck reactions and amination of aryl halides

A palladium 2‐mercapto‐N‐propylacetamide complex supported on functionalized MCM‐41 was prepared by a post‐grafting method and considered as an efficient catalyst for C? C cross‐coupling reactions between various aryl halides and sodium tetraphenylborate, phenylboronic acid, triphenyltin chloride or alkenes. Also, this catalyst shows good reactivity towards amination of aryl halides. This nanocatalyst was characterized using thermogravimetric analysis, X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, inductively coupled plasma and transmission electron microscopy techniques. Further results indicated that the heterogeneous catalyst could be recovered easily and reused several times without any loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

MCM‐41‐Supported Bidentate Phosphine Rhodium Complex: An Efficient and Recyclable Heterogeneous Catalyst for the Hydrosilylation of Olefins

MCM‐41‐supported bidentate phosphine rhodium complex (MCM‐41‐2P‐RhCl₃) was conveniently synthesized from commercially available and cheapγ‐aminopropyltriethoxysilane via immobilization on MCM‐41, followed by reacting with diphenylphosphinomethanol and rhodium chloride. It was found that the title complex is a highly efficient catalyst for the hydrosilylation of olefins with triethoxysilane and can be recovered and recycled by a simple filtration of the reaction solution and used for at least 10 consecutive trials without any decreases in activity.     

Chiral separation of amides of amino acid on a (S)‐N‐(3,5‐dinitrobenzoyl)leucine‐N‐phenyl‐N‐propylamide‐bonded silica using nonaqueous capillary electrochromatography

(S)‐N‐(3,5‐dinitrobenzoyl)leucine‐N‐phenyl‐N‐propylamine‐bonded silica was used as a chiral stationary phase for separation of a set of racemic π‐acidic and π‐basic α‐amino acid amides in electrolyteless ACN‐water eluents by CEC in the RP and polar organic (PO) modes. The effect of the amount of water in the ACN‐water eluent on chiral separation was examined. As water is added to ACN, retention was shortened but resolution and selectivity deteriorated severely. Retention, enantioselectivity, and resolution factors obtained in 100% ACN were compared with those in an n‐hexane‐isopropanol eluent with a small amount of water by normal phase (NP) CEC. Much shorter retention times with comparable enantioselectivities were observed with 100% ACN, demonstrating the advantage of separation on (S)‐N‐(DNB)leucine‐N‐phenyl‐N‐propylamine‐bonded silica in PO‐CEC over NP‐CEC.     

Heterogeneous copper‐catalyzed oxidative coupling of oxime acetates with sodium sulfinates: An efficient and practical synthesis of β‐keto sulfones

An efficient and practical route to β‐keto sulfones has been developed through heterogeneous oxidative coupling of oxime acetates with sodium sulfinates by using an MCM‐41‐supported Schiff base‐pyridine bidentate copper (II) complex [MCM‐41‐Sb,Py‐Cu (OAc)₂] as the catalyst and oxime acetates as an internal oxidant, followed by hydrolysis. The reaction generates a variety of β‐keto sulfones in good to excellent yields. This new heterogeneous copper (II) catalyst can be easily prepared via a simple procedure from readily available and inexpensive reagents and exhibits the same catalytic activity as Cu (OAc)₂. MCM‐41‐Sb,Py‐Cu (OAc)₂ is also easy to recover and is recyclable up to eight times with almost consistent activity.     

Phthalhydrazide immobilized on MCM‐41 as a potent and recoverable catalyst for the synthesis of pyrrolo[2,1‐a]isoquinolines

We present a study on the synthesis, characterization, and application of phthalhydrazide‐functionalized MCM‐41 (P‐MCM‐41) as a novel and efficient heterogeneous basic catalyst. The described catalyst was fully characterized via various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X‐ray (EDX), X‐ray diffraction (XRD), and Fourier transform infrared (FT‐IR). P‐MCM‐41 efficiently catalyzed the four‐component reaction of arylaldehydes, Meldrum's acid, alkyl isocyanides, and isoquinoline in CHCl₃ to prepare pyrrolo[2,1‐a]isoquinolines in good yields.     

Two pseudo‐enantiomeric forms of N‐benzyl‐4‐hydroxy‐1‐methyl‐2,2‐dioxo‐1H‐2λ6,1‐benzothiazine‐3‐carboxamide and their analgesic properties

The fact that molecular crystals exist as different polymorphic modifications and the identification of as many polymorphs as possible are important considerations for the pharmaceutic industry. The molecule of N‐benzyl‐4‐hydroxy‐1‐methyl‐2,2‐dioxo‐1H‐2λ⁶,1‐benzothiazine‐3‐carboxamide, C₁₇H₁₆N₂O₄S, does not contain a stereogenic atom, but intramolecular hydrogen‐bonding interactions engender enantiomeric chiral conformations as a labile racemic mixture. The title compound crystallized in a solvent‐dependent single chiral conformation within one of two conformationally polymorphic P2₁2₁2₁ orthorhombic chiral crystals (denoted forms A and B). Each of these pseudo‐enantiomorphic crystals contains one of two pseudo‐enantiomeric diastereomers. Form A was obtained from methylene chloride and form B can be crystallized from N,N‐dimethylformamide, ethanol, ethyl acetate or xylene. Pharmacological studies with solid–particulate suspensions have shown that crystalline form A exhibits an almost fourfold higher antinociceptive activity compared to form B.     

Synergetic mechanism and enantioseparation of aromatic β‐amino acids by biphasic chiral high‐speed counter‐current chromatography

A biphasic chiral recognition system based on chiral ligand exchange with Cu(II)‐N‐n‐dodecyl‐L‐proline and hydroxypropyl‐β‐cyclodextrin as an additive was developed to enantioseparate aromatic β‐amino acids by high‐speed counter‐current chromatography. The biphasic chiral recognition system was established with an n‐butanol/water (1:1, v/v) solvent system by adding N‐n‐dodecyl‐L‐proline and Cu(II) ions to the organic phase and hydroxypropyl‐β‐cyclodextrin to the aqueous phase. Several separation parameters, such as temperature, pH value, and chiral selector concentration, were systematically investigated by enantioselective liquid–liquid extraction. Under the optimal separation conditions, 54.5 mg of (R,S)‐β‐phenylalanine and 74.3 mg of (R,S)‐β‐3,4‐dimethoxyphenylalanine were baseline enantioseparated. More importantly, the synergistic enantiorecognition mechanism, based on the Cu(II)‐N‐n‐dodecyl‐L‐proline and hydroxypropyl‐β‐cyclodextrin, was discussed for the first time.     

An efficient heterogeneous cross‐coupling of aryl iodides with diphenylphosphine catalyzed by copper (I) immobilized in MCM‐41

The heterogeneous cross‐coupling reaction of aryl iodides with diphenylphosphine was achieved in toluene at 115 °C in the presence of 10 mol% of phenanthroline‐functionalized MCM‐41‐supported copper (I) complex (Phen‐MCM‐41‐CuI) with Cs₂CO₃ as base, yielding various unsymmetric triarylphosphines in good to excellent yields. This protocol can tolerate a wide range of functional groups and does not need the use of expensive additives or harsh reaction conditions. This heterogeneous Cu (I) catalyst exhibited the same catalytic activity as homogeneous CuI/Phen system, and could easily be recovered by a simple filtration of the reaction solution and recycled up to seven times without significant loss of activity.