Contamination and biomethylation of organotin compounds in pearl/fish culture areas in Japan.

Uwakai of Japan is famous for pearl and yellowtail fish culture. Recently, pearl culture farming in that region has suffered from a low production of pearls. An illegal use of organotin antifouling paints on fishing nets was reported. In the line of pollution studies, thus, the present investigation was carried out to examine the contamination status and fate of organotin compounds. Totally, 23 water, 10 sediment and 8 pearl oyster tissue samples were analyzed for tributyltin (TBT), triphenyltin (TPT), and their breakdown products (di- and mono compounds) by gas chromatography combined with inductively coupled plasma mass spectrometry (GC/ICP-MS). The results show that the TBT concentrations in water, sediment and biota were in the range from 0.11 to 10.6 ng Sn l(-1), 0.35 to 2500 ng Sn g(-1), and 50.4 to 181 ng Sn g(-1), respectively. The values for sediment and biota are expressed on the dry-weight basis. Triphenyltin in water, sediment and biota were in the range from 0.009 to 0.108 ng l(-1), non-detect to 12.7 ng g(-1), and non-detect to 6.83 ng g(-1), respectively. Although the TBT concentration in seawater is below the tentative assessment level of 10 ng l(-1) set by the Japanese Environment Agency in 1992, it may cause endocrine disruption/other effects in aquatic organisms. Octyltin compounds (mono-, di- and trioctyltin) were also quantified in seawater and sediment. The detection of dibutyldimethyltin (DBDMT) and tributylmonomethyltin (TBMMT) in sediment (methylated butyltins comprised 2.8-31% of total butyltins), and TBMMT in seawater suggested that biomethylation of anthropogenic tributyltins is a significant transformation pathway in the coastal environment.     

Determination of organotin compounds by headspace solid-phase microextraction–gas chromatography–pulsed flame-photometric detection (HS-SPME–GC–PFPD)

A method based on Headspace solid-phase microextraction (HS-SPME, with a 100 μm PDMS-fiber) in combination with gas-chromatography and pulsed flame-photometric detection (GC-PFPD) has been investigated for simultaneous determination of eight organotin compounds. Monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), monophenyltin (MPhT), and the semi-volatile diphenyltin (DPhT), triphenyltin (TPhT), monooctyltin (MOcT), and dioctyltin (DOcT) were determined after derivatization with sodium tetraethylborate. The conditions used for the extraction and preconcentration step were optimised by experimental design methodology. Tripropyltin (TPrT) and diheptyltin (DHepT) were used as internal standards for quantification of volatile and semi-volatile organotin compounds, respectively. The analytical precision (RSD) for ten successive injections of a standard mixture containing all the organic tin compounds ranged between 2 and 11%. The limits of detection for all the organotin compounds were sub ng (Sn) L⁻¹ in water and close to ng (Sn) kg⁻¹ in sediments. The accuracy of the method was evaluated by analysis of two certified reference material (CRM) sediment samples. The HS-SPME–GC–PFPD was then applied to the analysis of three harbour sediment samples. The results showed that headspace SPME is an attractive tool for analysis of organotin compounds in solid environmental matrices.     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography - mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30-1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Trace determination of organotin compounds in water,sediment and mussel samples by low-pressure gas chromatography coupled to tandem mass spectrometry

A fast method for the determination of eight organotin compounds (OTs), monobutyltin (MBT), dibutyltin (DBT), tributyltin (TBT), tetrabutyltin (TeBT), monophenyltin (MPhT), diphenyltin (DPhT), triphenyltin (TPhT) and tetraphenyltin (TePhT), in water, sediments and mussels, was developed using low-pressure gas chromatography/tandem mass spectrometry (LPGC/MS/MS). The method is based on sodium diethyldithiocarbamate (DDTC) complexation of the ionic organotins, followed by extraction of the target matrices and derivatization by a Grignard reagent, as described in a previously published method for water samples. Solid-phase extraction was selected as extraction method from water samples after comparison with liquid-liquid extraction, but extraction of the OTs from sediment and mussel samples was performed using toluene. Matrix-matched calibration standards were used to minimize matrix effects. The analytical process was validated by the analysis of spiked blank samples. Performance characteristics such as linearity, detection limit (LOD), quantitation limit (LOQ), precision, and recovery were determined. Recoveries of OTs in spiked matrices ranged from 86-108% in water and from 78-110% in sediments and mussels, with precision values lower than 18%. Detection limits ranged from 0.1-9.6 ng L(-1) in water, and 0.03-6.10 microg kg(-1) in the other matrices. The present implementation of LPGC rather than conventional capillary GC permitted use of large-volume injection and reduced analysis time by a factor of two. The proposed methodology was applied to the determination of OTs in real samples of water, marine sediments and mussels from the west coast of the Mediterranean Sea (Spain).     

Speciation of butyltin compounds in marine sediments with headspace solid phase microextraction and gas chromatography – mass spectrometry

A method for the determination of organotin compounds (monobutyl = MBT, dibutyl = DBT, and tributyltin = TBT) in marine sediments by headspace Solid Phase Microextraction (SPME) has been developed. The analytical procedure involved 1) extraction of TBT, DBT and MBT from sediments with HCl and methanol mixture, 2) in situ derivatization with sodium tetraethylborate and 3) headspace SPME extraction using a fiber coated with poly(dimethylsiloxane). The derivatized organotin compounds were desorbed into the splitless injector and simultaneously analyzed by gas chromatography – mass spectrometry. The analytical method was optimized with respect to derivatization reaction and extraction conditions. The detection limits obtained for MBT, DBT and TBT ranged from 730 to 969 pg/g as Sn dry weight. Linear calibration curves were obtained for all analytes in the range of 30–1000 ng/L as Sn. Analysis of a standard reference sediment (CRM 462) demonstrates the suitability of this method for the determination of butyltin compounds in marine sediments. The application to the determination of TBT, DBT and MBT in a coastal marine sediment is shown.     

Determination of phenolic xenoestrogens in environmental samples by liquid chromatography with mass spectrometric detection

A method is proposed for the determination of several phenolic xenoestrogens in aqueous and solid environmental samples. The method uses solid-phase extraction (preceded by ultrasonic solvent extraction for solid samples), reversed-phase liquid chromatographic separation, and mass spectrometric detection using both atmospheric pressure chemical ionization and electrospray ionization. This method was developed to support several studies undertaken to obtain aquatic and sedimentary data for rivers and seashores in Spain that are likely to be contaminated by endocrine-disrupting compounds (EDCs) as a consequence of wastewater discharge. Nonylphenol polyethoxylates (NPEOs), nonylphenoxy carboxylates (NPECs), nonylphenol (NP), octylphenol (OP), and bisphenol A (BPA) were determined in various samples of surface water and sediment, collected at different locations upstream and downstream from outfalls of municipal wastewater treatment plants (WWTPs). Seawater and marine sediments were collected in different harbor areas in Spain. Additionally, WWTP influent and effluents were analyzed to monitor the occurrence and transformation of phenolic EDCs during physicochemical and biological treatment. Rather high concentrations of the compounds investigated were found in some samples. Concentrations of NP were < or = 590 microg/kg in sediments and < or = 15 microg/L in water samples. NPEOs and NPECs were found in water samples in concentrations < or = 41 and < or = 35 microg/L, respectively. In solid samples (river sediment), concentrations of NPEO were < or = 818 microg/kg and those of NP1EC were 95 microg/kg.     

Species-specific isotope dilution analysis of mono-, di,and tri-butyltin compounds in sediment using gas chromatography-inductively coupled plasma mass spectrometry with synthesized 118Sn-enriched butyltins

A species-specific isotope dilution (ID) method is described for the determination of mono-, di, and tri-butyltin compounds in sediment by gas chromatography-inductively coupled plasma mass spectrometry (GC-ICP-MS), where the mixture of 118Sn-enriched butyltin compounds synthesized in our laboratory was used as a spike. A correction method for the mass bias, a quantitative extraction of the butyltins from sediment, and an assay for the concentration of the standard solution for the reverse ID procedure were investigated to achieve a reliable ID analysis. The spike solution was added with tri-propyltin (TPrT), and the butyltins were extracted by mechanical shaking into acetic acid-tropolone-toluene. The extracted butyltins were ethylated with sodium tetraethylborate and measured by GC-ICP-MS. The mass bias correction factor for the butyltins was calculated with the measured area ratio of 120Sn/118Sn of TPrT in each chromatographic run, and the correction was carried out. The mass bias was well corrected with this in-run correction (the standard uncertainties of the corrected 120Sn/118Sn for the butyltins were in the range 0.03-0.45%, typically 0.25%, with triplicate measurement corresponding to 0.02-0.37% mass bias). The extraction efficiency of mono-butyltin (MBT) from sediment was improved by using tropolone-toluene as the solvent. Well-defined standard solutions for the reverse-ID procedure could be obtained by an assay for the purities of the natural abundance butyltin chloride reagents used for preparing the standard solutions. Overall uncertainties associated with the present method were estimated, where the sediment certified reference materials, PACS-2 and BCR 646, were analyzed. The uncertainty arising from the extraction was the main contributor to the overall uncertainties for MBT and di-butyltin (DBT) determinations, while with the case of tri-butyltin (TBT) determination the uncertainties arising from the purity of TBT chloride reagent used for preparing the standard solution was a large contributor to the overall uncertainties although the uncertainty arising from the extraction was also a main contributor. The analytical results of MBT, DBT, and TBT in both reference materials, except for MBT results in PACS-2, were in good agreement with the certified values in each. The result of MBT in PACS-2 (0.677 +/- 0.049 microg g(-1) as tin, mean +/- expanded uncertainty) was significantly higher than the certified value (0.45 +/- 0.05 microg g(-1)), but closely matched with the lately reported values (Rajendran, Tao, Nakazato and Miyazaki, Analyst, 2000, 125, 1757: 0.62 +/- 0.02 microg g(-1); Chiron, Roy, Cottier and Jeannot, J. Chromatogr. A, 2000, 879, 137: 0.634 +/- 0.082 microg g(-1); Alonso, Encinar, Gonzalez and Sanz-Medal, Anal. Bioanal. Chem., 2002, 373, 432: 0.64 +/- 0.04 microg g(-1). The present method is concluded to be reliable for the determination of MBT, DBT, and TBT in sediment.     

Gas chromatography-high-resolution mass spectrometry based method for the simultaneous determination of nine organotin compounds in water,sediment and tissue

A GC-HRMS based method for the accurate and sensitive determination of nine organotin compounds, tetrabutyltin (TeBT), tributyltin (TBT), dibutyltin (DBT), monobutyltin (MBT), triphenyltin (TPhT), diphenyltin (DPhT), monophenyltin (MPhT), tricyclohexyltin (TCyT), and dicyclohexyltin (DCyT) in sediment, tissue and water samples is presented and discussed. Mass spectral features of these analytes via both low resolution quadrupole and high resolution magnetic sector, GC-HRMS conditions under selective ion monitoring mode and QA/QC criteria for the positive identification of analyte are all provided. Linearity of response and minimal detectable limits are illustrated for each of the nine compounds monitored and the estimates of method limits-of-detection were 7-29 ppt for water and 0.35-1.45 ppb for tissue or sediments. Sample preparation considerations and precision are discussed for spiked water and sediment samples, whereas method accuracy was established by analysing a certified reference material (CRM) mussel sample and comparing our results to the assigned values. Good agreement was found between our results and assigned or indicative values for MBT, DBT, TBT, DPhT and TPhT (cyclohexyl-tins were not present in the CRM).     

Speciation of organotin in environmental sediment samples

An optimized sample preparation procedure for organotin speciation in sediment samples has been applied to the analysis of sediments collected in the environment. The method is based on tropolone complexation of the ionic organotins, followed by extraction into a hexane-ethylacetate mixture and derivatization by NaBEt(4). The method was applied to the determination of organotin in various harbour, shipyard and dry-dock sediments in Belgium. Butyltin compounds were detected in all samples analyzed, often at high mg kg(-1) levels. A limited number of samples showed the presence of phenyltin compounds. Further, the method was adapted to the analysis of river sediments sampled from the vicinity of shipyards. Butyltin concentrations were detected at the microg kg(-1) level in the majority of samples.     

Preliminary evidence for in vitro methylation of tributyltin in a marine sediment

Recent reports from our laboratory on the occurrence of methylbutyltins in marine sediments and seawater suggest that these compounds are formed in the environment by the methylation of both tributyltin (TBT) and that­of its degradation products, i.e. dibutyltin and monobutyltin, to give Me_nBu_(4?n)Sn for which n = 1, 2 and 3 respectively. We investigated the possibility of inducing methylation of TBT in seawater–sediment mixtures in experiments carried out in vitro using environmental materials collected from a yacht marina in Msida, Malta. Three water–sediment mixtures, which were shown to contain TBT, dibutyltin and monobutyltin but no other organotins, were spiked with tributyltin chloride (90 mg in 100 ml sea‐water/100 ml sediment); to one mixture was added sodium acetate and to another methanol, to act as possible additional carbon sources, and all mixtures were allowed to stand at 25 °C in stoppered clear‐glass bottles in diffused light for a maximum of 315 days. Speciation and quantification of organotins was performed using aqueous phase boroethylation with simultaneous solvent extraction followed by gas chromatography with flame photometric detection. The atmosphere inside the bottles quickly became reducing with abundant presence of H₂S, and after an induction period of about 112 days, and only in the reaction mixture containing methanol, methyltributyltin (MeBu₃Sn) was observed in both sediment (maximum concentration 0.87 µg_Sn g^?1) and overlying water (maximum concentration 6.0 µg_Sn l^?1). The minimum conversion yield of TBT into MeBu₃Sn was estimated to be 0.3%. MeBu₃Sn has a significantly lower affinity for sediment than TBT and, therefore, is more mobile in the marine environment, possibly also migrating into the atmosphere to generate a hitherto unsuspected flux of organotin into that phase. Copyright © 2001 John Wiley & Sons, Ltd.     

A quantitative extraction method for the determination of trace amounts of both butyl- and phenyltin compounds in sediments by gas chromatography-inductively coupled plasma mass spectrometry

A simple and reliable extraction method was developed for quantitative determination of both butyl- and phenyltin compounds in sediments by capillary gas chromatography combined with inductively coupled plasma mass spectrometry (GC-ICP-MS). Both types of organotin compounds were extracted quantitatively from sediment by mechanical shaking into tropolone-toluene and HCl-methanol. After phase separation and pH adjustment, these organotins were ethylated with sodium tetraethylborate. The method was evaluated by analyzing PACS-2 and NIES No. 12 sediment certified reference materials. The dibutyltin (DBT; 1.14 +/- 0.02 micrograms g-1) and tributyltin (TBT; 1.01 +/- 0.04 micrograms g-1) values observed in PACS-2 sediment closely matched the certified values (DBT, 1.09 +/- 0.15; TBT, 0.98 +/- 0.13 microgram g-1 as tin). The monobutyltin (MBT) value was higher (0.62 +/- 0.02 microgram g-1) by more than two fold over the reference value (0.3 microgram g-1 as tin). The concentrations of TBT (0.18 +/- 0.04 microgram g-1) and triphenyltin (TPhT; 0.0099 +/- 0.002 microgram g-1) in the NIES No. 12 sediment were also in good agreement with the certified and reference values of TBT (0.19 +/- 0.03 microgram g-1 as compound) and TPhT (0.008 microgram g-1 as compound), respectively. Recoveries of TBT, tripentyltin (TPeT) and TPhT from spiked sediments were satisfactory (TBT, 102 +/- 3.4%; TPrT, 96 +/- 3.4%; TPhT, 99 +/- 8.5%). The detection limits as tin were in the range 0.23-0.48 ng g-1 for a 0.5 g sample size. It is also noteworthy that clean-up of the extract is not necessary because of the superior selectivity of ICP-MS detection. The present method was successfully applied to marine sediment samples.     

Solid-phase extraction-liquid chromatography-fluorimetry for organotin speciation in natural waters

Summary A method is reported for the determination of dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT), and triphenyltin (TPhT) species at the nanogram per litre concentration level in natural water samples. Analytes were isolated from samples by solid-phase extraction and analysed both off-line and on-line by reversed-phase high-performance liquid chromatography with post-column derivatization and fluorimetric detection. Several SPE cartridges and eluents were evaluated; C₁₈ enrichment and elution with a mixture of methanol, acetic acid, and water was found most suitable. Preconcentration factors up to 250 can be achieved when a 500-mL sample is processed. Detection limits, recovery rates, and the precision of the whole process have been determined. The method has been applied to the determination of organotin species in spiked natural water samples collected on the NW Mediterranean coast. Recovery rates range from 75 to 110% and detection limits are at the low ng L⁻¹ level (1–3 ng Sn L⁻¹ for DPhT, DBT, and PhT and 40 ng Sn L⁻¹ for TBT when 250 mL spiked sea water is processed.)     

Synthesis and evaluation of molecularly imprinted polymers for organotin compounds: a screening method for tributyltin detection in seawater

The environmental impact of some organotin compounds (OTC) has given particulate importance to analytical studies. This paper reports the first attempt to apply the emerging molecular imprinting technology to this field. Several imprinted polymers have been synthesised by the non-covalent free radical approach using sodium methacrylate (NaMA) or 4-vinylpyridine (4-VP) as monomers in the presence of TBT as template molecule in three different polymerisation media (toluene, acetonitrile and methanol/water). The ability of the polymers synthesised to retain and distinguish TBT from its degradation products has been evaluated and optimized. The results clearly showed the presence of cavities within the polymeric matrix allowing specific recognition of TBT. Cross-reactivity from other Sn species (monobutyltin (MBT), dibutyltin (DBT) and inorganic Sn) has also been evaluated. Rapid and direct differentiation of TBT from its main degradation products in seawater was achieved. The analytical characteristics included linearity (0.05-50 μg l⁻¹), a pre-concentration factor of 150, and a quantification limit of 0.04 μg l⁻¹ for 1 l.     

Speciation of organotin compounds in marine sediments by capillary column gas chromatography-atomic absorption spectrometry coupled with hydride generation

A method for speciation of organotin compounds in marine sediments by solvent extraction combined with hydride generation gas chromatography-atomic absorption spectrometry has been developed. Sediment samples spiked with tributyltin and triphenyltin chlorides were homogenized in hydrochloric acid. The chlorides were extracted twice into toluene. Recoveries of the organotin compounds from the spiked sediment samples were improved by the addition of 8-quinolinol. Tributyltin and triphenyltin chlorides form ion-associates with 8-quinolinol in aqueous hydrochloric acid. The method was optimized with respect to derivatization reactions and extraction conditions. Interferences from Sn(II/IV) and additional 13 ions were investigated. Recoveries of 84-100% for tributyltin and 86-100% for triphenyltin were achieved using this method. The detection limits obtained for tributyltin and triphenyltin chlorides were 95 and 145 pg, respectively, corresponding to a relative detection limit of 95 and 145 ng kg(-1) in the sediment.     

Isotope dilution analysis as a definitive tool for the speciation of organotin compounds

Different spike solutions available for the determination of butyltin compounds by isotope dilution analysis are described and applied for the determination of butyltin compounds in PACS-2 certified reference material. Additionally, those spike solutions were evaluated during the course of an interlaboratory exercise organised by the National Research Council of Canada and the Laboratory of the Government Chemist (UK) in order to quantify tributyltin in a pilot sediment. The aim of this project was to evaluate the capabilities of isotope dilution mass spectrometry to reduce the uncertainty in the certification of Reference Materials for the speciation of organotin compounds. All participants were supplied with a 17Sn-enriched TBT solution from the Laboratory of the Government Chemist (UK). In our case, we performed the analysis of the pilot sediment also using a 119Sn enriched spike (mixed mono-, di- and tributyltin) and a 118Sn-119Sn double spike. The use of these additional spike solutions not only allowed the determination of monobutyltin and dibutyltin in the pilot sediment but also the evaluation and correction of possible extraction-derived rearrangement reactions. An excellent agreement amongst our results and between the participants was obtained with a precision of 8.4% RSD at a level of ca. 80 ng TBT g(-1) (as Sn).     

Application of experimental design in a method for screening sediments for global determination of organic tin by electrothermal atomic absorption spectrometry (ETAAS)

An experimental design was developed to obtain a simple procedure for global determination of organic tin compounds in sediment. Sediment was extracted by a two-phase method and tin was determined in the organic extract by electrothermal atomic absorption spectrometry (ETAAS), with palladium as chemical modifier. A Plackett-Burman design for screening and a fractional central composite design (CCD) for optimizing were used for evaluation of the effects of several variables. The results showed that sediment mass, volume and concentration of extracting acid, pyrolysis and atomization temperatures, and modifier concentration affect the determination. Reference material PACS-2 was analyzed to evaluate the procedure. It was possible to extract 82% of the organotin content certified in the reference sediment. The limit of detection (LOD) was 0.08 microg g(-1) and the relative standard deviation was 4%. The method was applied to the analysis of estuarine superficial sediments from Gipuzkoa (Spain). The organotin content of these samples ranged from 0.7 to 7.7 microg g(-1), as tin, on a dry-weight basis.     

Development and application of an ultratrace method for speciation of organotin compounds in cryogenically archived and homogenized biological materials

An accurate, ultra-sensitive and robust method for speciation of mono, di, and tributyltin (MBT, DBT, and TBT) by speciated isotope-dilution gas chromatography-inductively coupled plasma-mass spectrometry (SID-GC-ICPMS) has been developed for quantification of butyltin concentrations in cryogenic biological materials maintained in an uninterrupted cryo-chain from storage conditions through homogenization and bottling. The method significantly reduces the detection limits, to the low pg g(-1) level (as Sn), and was validated by using the European reference material (ERM) CE477, mussel tissue, produced by the Institute for Reference Materials and Measurements. It was applied to three different cryogenic biological materials-a fresh-frozen mussel tissue (SRM 1974b) together with complex materials, a protein-rich material (whale liver control material, QC03LH03), and a lipid-rich material (whale blubber, SRM 1945) containing up to 72% lipids. The commutability between frozen and freeze-dried materials with regard to spike equilibration/interaction, extraction efficiency, and the absence of detectable transformations was carefully investigated by applying complementary methods and by varying extraction conditions and spiking strategies. The inter-method results enabled assignment of reference concentrations of butyltins in cryogenic SRMs and control materials for the first time. The reference concentrations of MBT, DBT, and TBT in SRM 1974b were 0.92 +/- 0.06, 2.7 +/- 0.4, and 6.58 +/- 0.19 ng g(-1) as Sn (wet-mass), respectively; in SRM 1945 they were 0.38 +/- 0.06, 1.19 +/- 0.26, and 3.55 +/- 0.44 ng g(-1), respectively, as Sn (wet-mass). In QC03LH03, DBT and TBT concentrations were 30.0 +/- 2.7 and 2.26 +/- 0.38 ng g(-1) as Sn (wet-mass). The concentration range of butyltins in these materials is one to three orders of magnitude lower than in ERM CE477. This study demonstrated that cryogenically processed and stored biological materials are a promising alternative to conventional freeze-dried materials for organotin speciation analysis, because these are, at present, the best conditions for minimizing degradation of thermolabile species and for long-term archival. Finally, the potential of the analytical method was illustrated by analysis of polar bear (Ursus maritimus) and beluga whale (Delphinapterus leuca) liver samples that had been collected in the Arctic and archived at the Marine Environmental Specimen Bank. Significant concentrations of butyltin compounds were found in the samples and provide the first evidence of the presence of this class of contaminant in the Arctic marine ecosystem. Figure Eye catch image.     

Innovative method for determination of 19 polycyclic aromatic hydrocarbons in food and oil samples using gas chromatography coupled to tandem mass spectrometry based on an isotope dilution approach

An efficient and selective analytical method for the determination and the quantification of 19 polycyclic aromatic hydrocarbons (PAHs) in food and oil has been developed. This method includes the monitoring of 15 PAHs stated as a priority by the EU in their 2005/108 recommendation. The samples were extracted according to a selective extraction step using pressurized liquid extraction followed by a purification with polystyrene-divinylbenzene SPE. Identification and quantification were performed using GC-MS/MS, with an isotope dilution approach using (13)C-labelled PAHs. The novel combination of selective extraction followed by purification provides highly purified analytes combined to a fast and automated method. The advantages of GC-MS/MS as compared to other detection methods are tremendous in terms of sensitivity, selectivity and interpretation facilities. Limits of detection varied between 0.008 and 0.15 microg kg(-1), limits of quantification between 0.025 and 0.915 microg kg(-1) for PAHs in food. The calibration curves showed a good linearity for all PAHs (R(2)>0.99) and precision and recovery were fit for purpose. Trueness of the method was carried out using the US National Institute of Standards and Technology SRM 2977 reference material.     

Simultaneous determination of mono-, di- and tributyltin in environmental samples using isotope dilution gas chromatography mass spectrometry

The development of a rapid, precise and accurate speciation method for the simultaneous determination of mono-, di- and tributyltin in environmental samples is described. The method is based on using isotope dilution gas chromatography/mass spectrometry (GC/MS) with electron ionization, a widely used technique in routine testing laboratories. A mixed spike containing (119)Sn-enriched monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) was used for the isotope dilution of the samples. Five molecular ions were monitored for each analyte, corresponding to the (116)Sn, (117)Sn, (118)Sn, (119)Sn and (120)Sn isotopes. The detection at masses corresponding to (116)Sn and (117)Sn were used to correct for m + 1 and m + 2 contributions of (13)C from the organic groups attached to the tin atom on the (118)Sn, (119)Sn and (120)Sn masses with simple mathematical equations and the concentrations of the butyltin compounds were calculated based on the corrected (118)Sn/(119)Sn and (120)Sn/(119)Sn isotope ratios. The (119)Sn-enriched multispecies spike was applied with satisfactory results to the simultaneous determination of MBT, DBT and TBT in three certified reference materials: two sediments, PACS-2 and BCR 646, and the mussel tissue CRM 477. The method was compared with a previously published GC/inductively coupled plasma MS isotope dilution procedure, developed in our laboratory, by injecting the same samples into both instruments. Comparable analytical results in terms of precision and accuracy are demonstrated for both atomic and molecular mass spectrometric detectors. Thus, reliable quantitative organotin speciation analysis can be achieved using the more widespread and inexpensive GC/MS instrument.     

Aflatoxin M1 determination in cheese by liquid chromatography-tandem mass spectrometry

A new method for determining aflatoxin M1 (AFM1) in cheese by liquid chromatography-tandem mass spectrometry has been developed. Two methodologies were compared for sample extraction. The first one involves sample extraction with dichloromethane for hard, aged cheese or acetone for fresh cheese and includes a preliminary matrix solid-phase dispersion-extraction step before solid-phase extraction (SPE) clean-up by a Carbograph-4 cartridge. The second method uses a water/methanol solution (90:10, v/v) extraction at 150 degrees C before clean-up. The average recoveries of AFM1 from samples spiked at levels of 0.25-0.45 microg/kg, were 81-92% and the precision (RSD) ranged from 3 to 7% with the first method, whilst the average recoveries were 79-84%, and RSD ranged from 7 to 15% for the second method. Due to different matrix effect, the quantification limits were 0.019-0.025 microg/kg in the first case and 0.048-0.143 microg/kg in the second one, depending on cheese typology.