Transient and steady-state behavior of auto-igniting propane and dimethyl ether fuel jets in high-temperature vitiated coflows

In the current study, the auto-ignition dynamics of cold fuel jets issuing into a high-temperature, vitiated environments is investigated. Due to the short time scale of these events, high-speed measurements are used to resolve the coupled spatio-temporal behavior. The present study uses high-speed (20-kHz) OH* chemiluminescence imaging to identify the location and timing of the formation of the initial ignition kernels, providing visualization of the ignition dynamics and a detailed statistical evaluation of ignition heights and ignition delay times across a broad parameter space which includes variations in fuel type, dilution levels, coflow temperature, and coflow oxidizer content. The auto-ignition location and ignition delay times show a strong sensitivity to coflow temperature with increased sensitivities at lower coflow temperatures. Comparisons between kernel formation location for the transient jet and the fluctuating flame base of the subsequent, steady-state flame is presented, highlighting the role of flame propagation on flame stabilization. Results indicate that at lower temperatures the flame stabilization mechanism is dominated by auto-ignition, but at higher coflow temperatures, flame propagation plays a key role. The effects of variations in the hot, coflow oxidizer content on ignition properties were found to be noticeable, but still significantly less than variations in the temperature.     

Diesel flame lift-off stabilization in the presence of laser-ignition: a numerical study

Diesel flame lift-off and stabilization in the presence of laser-ignition were numerically investigated with the method of Eulerian stochastic fields. The aim was to scrutinise the interaction between the lifted diesel flame and an ignition kernel upstream of the lifted flame. The numerical simulation was carried out in a constant-volume combustion vessel with n-heptane as fuel. The process was studied previously in an experiment employing Diesel #2 as the fuel in the same combustion vessel. In the experiment a lifted flame was first established at a position downstream of the nozzle. An ignition kernel was then initiated using a high-energy pulse laser at a position upstream of the natural lift-off position of the diesel flame. The laser-ignition kernel was modelled using a high-temperature (～2000 K) hot spot. In both experiment and simulations the upstream front of the ignition kernel was shown to remain around the initial laser ignition site for a substantially long period of time, while the downstream front of the ignition kernel propagates rapidly towards the natural lift-off position downstream of the laser ignition site. The lift-off position oscillated before the final stabilization at the natural lift-off position. The structures and the propagation speed of the reaction fronts in the laser-ignition kernel and the main flame were analysed. Two different stabilization mechanisms, the auto-ignition mechanism and the flame propagation mechanism, were identified for the naturally lifted flame and the laser-induced reaction front, respectively. A mechanism was proposed to explain the oscillation of the lift-off position.     

LES/CMC modelling of ignition and flame propagation in a non-premixed methane jet

The Large Eddy Simulation (LES) / Conditional Moment Closure (CMC) model with detailed chemistry is used for modelling spark ignition and flame propagation in a turbulent methane jet in ambient air. Two centerline and one off-axis ignition locations are simulated. We focus on predicting the flame kernel formation, flame edge propagation and stabilization. The current LES/CMC computations capture the three stages reasonably well compared to available experimental data. Regarding the formation of flame kernel, it is found that the convection dominates the propagation of its downstream edge. The simulated initial downstream and radial flame propagation compare well with OH-PLIF images from the experiment. Additionally, when the spark is deposited at off-centerline locations, the flame first propagates downstream and then back upstream from the other side of the stoichiometric iso-surface. At the leading edge location, the chemical source term is larger than others in magnitude, indicating its role in the flame propagation. The time evolution of flame edge position and the final lift-off height are compared with measurements and generally good agreement is observed. The conditional quantities at the stabilization point reflect a balance between chemistry and micro-mixing. This investigation, which focused on model validation for various stages of spark ignition of a turbulent lifted jet flame through comparison with measurements, demonstrates that turbulent edge flame propagation in non-premixed systems can be reasonably well captured by LES/CMC.     

Experimental investigation of the auto-ignition of a transient propane Jet-in-Hot-Coflow

Auto-ignition is a complex process which is extremely sensitive to boundary conditions such as local temperature, mixture or strain rate and occurs on very short time-scales. Therefore, measurement techniques with high spatio-temporal resolution have to be applied to test cases with well-defined boundary conditions in order to generate high-quality validation data for numerical simulations. In the current paper, the auto-ignition of a transient propane jet-in-hot coflow was studied with high-speed OH* chemiluminescence imaging and high-speed Rayleigh scattering for the simultaneous determination of mixture fraction, mixture temperature and scalar dissipation rate immediately prior to the onset of auto-ignition. A variation of the coflow temperature showed a pronounced temperature dependence of the auto-ignition location and time, and the temperature sensitivity was higher than for a comparable methane test case from the literature. This is explained by the lower sensitivity of propane ignition delay times to the local strain rate in comparison to methane. The Rayleigh measurements however showed that the formation mechanism of auto-ignition kernels is similar for propane and methane. Ignition kernels were found to form upstream of bulges of the inflowing jet at locations with locally low scalar dissipation rate.     

Stabilization mechanism of lifted flame edge in the near field of coflow jets for diluted methane

The stabilization mechanism of lifted flames in the near field of coflow jets has been investigated experimentally and numerically for methane fuel diluted with nitrogen. The lifted flames were observed only in the near field of coflow jets until blowout occurred in the normal gravity condition. To elucidate the stabilization mechanism for the stationary lifted flames of methane having the Schmidt number smaller than unity, the behavior of the flame in the buoyancy-free condition, and unsteady propagation characteristics after ignition were investigated numerically at various conditions of jet velocity. It has been found that buoyancy plays an important role for flame stabilization of lifted flames under normal gravity, such that the flame becomes attached to the nozzle in microgravity. The stabilization mechanism is found to be due to the variation of the propagation speed of the lifted flame edge with axial distance from the nozzle in the near field of the coflow as compared to the local flow velocity variation at the edge.     

Simultaneous rainbow schlieren deflectometry and OH* chemiluminescence imaging of a diesel spray flame in constant pressure flow rig

The physical and chemical phenomena that take place during fuel injection, entrainment and fuel-air mixing, cool-flame and ignition reaction, and combustion in diesel sprays still require extensive study. Global parameters such as liquid and vapor jet penetration lengths and spreading rates render useful yet still limited information. Understanding of the temporal evolution of the spray as it progresses through various steps is needed to develop advanced clean combustion modes and high-fidelity predictive models with sufficient accuracy. In this study, high-speed rainbow schlieren deflectometry (RSD) and OH* chemiluminescence are used to simultaneously image fuel-air mixing, cool-flame reactions, ignition, flame propagation and stabilization, and combustion in a transient diesel-like flame. A constant pressure flow rig (CPFR) is used to conduct multiple injections in quick succession to obtain a statistically relevant dataset. n-heptane was injected at nominal supply pressure of 1000 bar from a single-hole diesel injector into ambient at pressure of 30 bar and temperature of 800 K. About 500 injections were performed and analyzed to reveal structural features of non-reacting and reacting regions of the spray, quantify jet penetration and spreading rates, and study cool-flame behavior, ignition, flame propagation and stabilization at lift-off length, and combustion at upstream and downstream locations.     

Large Eddy Simulation of flame stabilisation dynamics and vortex control in a lifted H2/N2 jet flame

Flame stabilisation in (highly) preheated mixture is common in several industrial applications. When the reactants are injected separately in the device (usually at high-speed), the flame is lifted so that the fuel and oxidant first mix to give an ignitable mixture. If the temperature of the mixture is adequate, it auto-ignites stabilizing the flame. Here we focus on an academic lifted jet flame and Large Eddy Simulation (LES) is used to capture the flame and auto-ignition dynamics. Comparisons with experimental data show that LES simulates accurately high OH fluctuation levels at the stabilisation location. The vortex dynamics linked to these fluctuations is analyzed and it is found that small scale coherent structures play a vital role in the auto-ignition process. These structures are axial vorticity tubes (braids) and are located relatively far (in the radial direction) from the shear-layer. As a consequence, the lift-off height varies dramatically in time leading to OH fluctuations of the order of the mean OH concentration. This scenario is monitored in the compositional space highlighting the simultaneous evolution of OH, HO ₂ and temperature. Further, different strategies for open-loop control of the flame lift-off height are tested. In order to anchor the flame at different positions downstream of the nozzle, the vortex dynamics in the shear-layer was modified. Promoting successively vortex ring and braids, the auto-ignition region was moved significantly. In particular, modified nozzle geometries impacted the formation of braids and ensured a good premixing very close to the nozzle. As a consequence, it was possible to reduce significantly the lift-off height and stabilise the flame few diameters downstream of the nozzle.     

Detailed measurements of transient two-stage ignition and combustion processes in high-pressure spray flames using simultaneous high-speed formaldehyde PLIF and schlieren imaging

This study investigates the low- and high-temperature ignition and combustion processes in a high-pressure spray flame of n-dodecane using simultaneous 50-kHz formaldehyde (HCHO) planar laser-induced fluorescence (PLIF) and 100-kHz schlieren imaging. The PLIF measurements were facilitated through the use of a pulse-burst-mode Nd:YAG laser, producing a 355-nm pulse-train with 300 pulses at 70 mJ/pulse, separated by 20-µs, in a 6-ms burst. The high-speed HCHO PLIF signal was imaged using a non-intensified CMOS camera with dynamic background emission correction. The acquisition rate of this HCHO PLIF diagnostic is unique to the research community, and when combined with high-speed schlieren imaging, provides unprecedented opportunity for analysis of the spatiotemporal evolution of fuel jet penetration and low- and high-temperature ignition processes relevant to internal combustion engine conditions. The present experiments are conducted in the Sandia constant-volume preburn vessel equipped with a new Spray A injector. The influences of ambient conditions are examined on the ignition delay times of the two-stage ignition events, HCHO structures, and lift-off length values. Consistent with past studies of traditional Spray A flames, the formation of HCHO is first observed in the jet peripheries where the equivalence ratio (Φ) is expected to be leaner and hotter and then grows in size and in intensity downstream into the jet core where Φ is expected to be richer and colder. The measurements demonstrate that the formation and propagation of HCHO from the leaner to richer region leads to high-temperature ignition events, supporting the identification of a phenomenon coined “cool-flame wave propagation” during the transient ignition process. Subsequent high-temperature ignition is found to consume the previously formed HCHO in the jet head, while the formation of HCHO persists in the fuel-rich zone near the flame base over the entire combustion period.     

Decreasing liftoff height behavior in diluted laminar lifted methane jet flames

Stabilization of laminar lifted coflow jet flames of nitrogen-diluted methane was investigated experimentally and numerically. As the fuel jet velocity was increased, two distinct behaviors in liftoff height were observed depending on the initial fuel mole fraction; a monotonically increasing trend and a decreasing and then increasing trend (U-shaped behavior). The former was observed in the jet-developing region and the latter in the jet-developed region. Because the decreasing behavior of liftoff height with jet velocity has not been observed at ambient temperature, the present study focuses on decreasing liftoff height behavior. To elucidate the physical mechanism underlying the U-shaped behavior, numerical simulations of reacting jets were conducted by adopting a skeletal mechanism. The U-shaped behavior was related to the buoyancy. At small jet velocities, the relative importance of the buoyancy over convection was strong and the flow field was accelerated in the downstream region to stabilize the lifted flame. As the jet velocity increased, the relative importance of buoyancy decreased and the liftoff height decreased. As the jet velocity further increased, the flame stabilization was controlled by jet momentum and the liftoff height increased.     

Autoignition-controlled flame initiation and flame stabilization in a reacting jet in crossflow

This paper describes an analysis of the mechanisms of autoignition-controlled flame initiation and flame stabilization in a nonpremixed jet in crossflows, using simultaneous high-speed (10 kHz) tomographic particle image velocimetry, OH-PLIF and line-of-sight flame emissions. Measurements are conducted on a turbulent, transverse, reacting propane jet issued into a crossflow generated by combustion of natural gas at an equivalence ratio of 0.4 with the crossflow velocity of 10 m/s, the crossflow temperature of 1350 K and the jet momentum flux ratio of 41. While several prior studies have analyzed the lifted character of the flame in similar configurations, we show that several dynamic processes precede the leading edge of the lifted diffusion flame, including formation and evolution of “autoignition kernels”, “flame kernels” and “flame fragments”. “Autoignition kernels”, i.e., discrete compact reaction zones with the peak hydroxyl (OH) fluorescence intensity below that of the diffusion flame, initiate preferably at bulges along the jet periphery where the strain rates and the scalar dissipation rates are lower. The autoignition kernel grows in both size and the OH-fluorescence intensity as it convects downstream. An autoignition kernel transitions into a propagating flame kernel, which quickly gets distorted and elongated in the direction of the principal expansion strain rate to form a flame fragment. Neighboring flame fragments merge with each other and with the downstream diffusion flame via edge-flame propagation. Merging of upstream flame fragments with the downstream diffusion flame results in an upstream advancement of the diffusion-flame front. The diffusion flame front is intrinsically unsteady because of the rather random formation and evolution of autoignition kernels, flame kernels and flame fragments, presumably due to the stochastic velocity, the strain rate and mixture-fraction oscillations.     

Heat release rate as represented by [OH] × [CH2O] and its role in autoignition

Data from a recent instantaneous, simultaneous, high-resolution imaging experiment of Rayleigh temperature and laser induced fluorescence (LIF) of OH and CH₂O at the base of a turbulent lifted methane flame issuing into a hot vitiated coflow are analysed and contrasted to reference flames to further investigate the stabilization mechanisms involved. The use of the product of the quantified OH and semi-quantified CH₂O images as a marker for heat release rate is validated for transient autoigniting laminar flames. This is combined with temperature gradient information to investigate the flame structure. Super-equilibrium OH, the nature of the profiles of heat release rate with respect to OH mole fraction, and comparatively high peak heat release rates at low temperature gradients is found in the kernel structures at the flame base, and found to be indicative of autoignition stabilization.     

抬举湍流H2/N2射流火焰的PDF模拟

采用数值目的研究了一个高温燃烧产物环境中的抬举湍流H₂/N₂射流火焰,对火焰的自然和抬举特性进行了研究.采用标量联合概率密度函数(PDF)目的处理详细的化学动力学过程,而湍流流场采用一个多时间尺度(MTS)k-ε湍流模型计算.计算中结合了一套描述氢气氧化的详细化学反应动力学机理.计算结果和实验数据进行了对比,表明所采用的模型可以精确的模拟火焰抬举高度和自然的过程.     

Visualization of multiple scalar and velocity fields in a lifted jet flame

The stabilization of lifted jet diffusion flames has long been a topic of interest to combustion researchers. The flame and flow morphology, the role of partial premixing, and the effects of large scale structures on the flame can be visualized through advanced optical imaging techniques. Many of the current explanations for flame stabilization can benefit from the flow and flame information provided by laser diagnostics. Additionally, the images acquired from laser diagnostic experiments reveal features invisible to the eye and line-of-sight techniques, thereby allowing a deeper insight into flame stabilization. This paper reports visualizations of flame and flow structures from Particle Image Velocimetry (PIV), Planar Laser-Induced Fluorescence (PLIF) and Rayleigh scattering. The techniques are surveyed and the success of visualization techniques in clarifying and furthering the understanding of lifted-jet flame stabilization is discussed.     

The stabilization mechanism and structure of turbulent hydrocarbon lifted flames

The structure and stabilization mechanism of turbulent lifted non-premixed hydrocarbon flames have been investigated using combined laser imaging techniques. The techniques include Rayleigh scattering, laser induced predissociation fluorescence of OH, LIF of PAH, LIF of CH₂O, and planar imaging velocimetry. The geometrical structure of multi-reaction zones and flow field at the stabilization region have been simultaneously measured in 16 hydrocarbon flames. The data reveal the existence of triple flame structure at the stabilization region of turbulent lifted flames. Increasing the jet velocity leads to an increase of the lift-off height and to a broadening of the lift-off region. Further analysis of the stabilization criterion at the lift-off height based on the premixed nature of triple-flame propagation and flow field data has been presented and discussed.     

Transported PDF simulation of auto-ignition of a turbulent methane jet in a hot,vitiated coflow

In the current work, the auto-ignition of a turbulent round methane jet is studied numerically by means of a transported probability density function (PDF) method. The methane jet is issued into a hot, vitiated coflow, where it ignites to form a steady lifted flame. For this flame, experimental data of hydroxyl, temperature and mixture fraction are provided in the area where the fuel auto-ignites. To model this experiment, the transport equation for the thermochemical PDF is solved using a hybrid finite volume / Lagrangian Monte-Carlo method. Turbulence is modelled using the k-? turbulence model including a jet-correction. Computational results are compared to experimental data in terms of mean quantities, variances and lift-off height. Moreover, the structure of the one-point, one-time marginal PDF of temperature is analysed and compared to experimental data which are provided in this work. It is found that the transported PDF method in conjunction with the k-? model is capable of reproducing these statistical data very well. In particular the effect of ignition on the marginal PDF of temperature can be well reproduced with this approach. To further analyse the relevant processes in the evolution of the temperature PDF, a statistically homogeneous system is studied both numerically and analytically.     

A numerical study of auto-ignition in turbulent lifted flames issuing into a vitiated co-flow

This paper presents a numerical study of auto-ignition in simple jets of a hydrogen–nitrogen mixture issuing into a vitiated co-flowing stream. The stabilization region of these flames is complex and, depending on the flow conditions, may undergo a transition from auto-ignition to premixed flame propagation. The objective of this paper is to develop numerical indicators for identifying such behavior, first in well-known simple test cases and then in the lifted turbulent flames. The calculations employ a composition probability density function (PDF) approach coupled to the commercial CFD code, FLUENT. The in-situ-adaptive tabulation (ISAT) method is used to implement detailed chemical kinetics. A simple k–ε turbulence model is used for turbulence along with a low Reynolds number model close to the solid walls of the fuel pipe.

The first indicator is based on an analysis of the species transport with respect to the budget of convection, diffusion and chemical reaction terms. This is a powerful tool for investigating aspects of turbulent combustion that would otherwise be prohibitive or impossible to examine experimentally. Reaction balanced by convection with minimal axial diffusion is taken as an indicator of auto-ignition while a diffusive–reactive balance, preceded by a convective–diffusive balanced pre-heat zone, is representative of a premixed flame. The second indicator is the relative location of the onset of creation of certain radical species such as HO₂ ahead of the flame zone. The buildup of HO₂ prior to the creation of H, O and OH is taken as another indicator of autoignition.

The paper first confirms the relevance of these indicators with respect to two simple test cases representing clear auto-ignition and premixed flame propagation. Three turbulent lifted flames are then investigated and the presence of auto-ignition is identified. These numerical tools are essential in providing valuable insights into the stabilization behaviour of these flames, and the demarcation between processes of auto-ignition and premixed flame propagation.     

Effect of methane on pilot-fuel auto-ignition in dual-fuel engines

The ignition behavior of n-dodecane micro-pilot spray in a lean-premixed methane/air charge was investigated in an optically accessible Rapid Compression-Expansion Machine at dual-fuel engine-like pressure/temperature conditions. The pilot fuel was admitted using a coaxial single-hole 100?µm injector mounted on the cylinder periphery. Optical diagnostics include combined high-speed CH₂O-PLIF (10?kHz) and Schlieren (80?kHz) imaging for detection of the first-stage ignition, and simultaneous high-speed OH* chemiluminescence (40?kHz) imaging for high-temperature ignition. The aim of this study is to enhance the fundamental understanding of the interaction of methane with the auto-ignition process of short pilot-fuel injections. Addition of methane into the air charge considerably prolongs ignition delay of the pilot spray with an increasing effect at lower temperatures and with higher methane/air equivalence ratios. The temporal separation of the first CH₂O detection and high-temperature ignition was found almost constant regardless of methane content. This was interpreted as methane mostly deferring the cool-flame reactivity. In order to understand the underlying mechanisms of this interaction, experimental investigations were complemented with 1D-flamelet simulations using detailed chemistry, confirming the chemical influence of methane deferring the reactivity in the pilot-fuel lean mixtures. This shifts the onset of first-stage reactivity towards the fuel-richer conditions. Consequently, the onset of the turbulent cool-flame is delayed, leading to an overall increased high-temperature ignition delay. Overall, the study reveals a complex interplay between entrainment, low T and high T chemistry and micro-mixing for dual-fuel auto-ignition processes for which the governing processes were identified.     

Simultaneous 36 kHz PLIF/chemiluminescence imaging of fuel,CH2O and combustion in a PPC engine

The requirements on high efficiency and low emissions of internal combustion engines (ICEs) raise the research focus on advanced combustion concepts, e.g., premixed-charge compression ignition (PCCI), partially premixed compression ignition (PPCI), reactivity controlled compression ignition (RCCI), partially premixed combustion (PPC), gasoline compression ignition (GCI) etc. In the present study, an optically accessible engine is operated in PPC mode, featuring compression ignition of a diluted, stratified charge of gasoline-like fuel injected directly into the cylinder. A high-speed, high-power burst-mode laser system in combination with a high-speed CMOS camera is employed for diagnostics of the autoignition process which is critical for the combustion phasing and efficiency of the engine. To the authors’ best knowledge, this work demonstrates for the first time the application of the burst-system for simultaneous fuel tracer planar laser induced fluorescence (PLIF) and chemiluminescence imaging in an optical engine, at 36?kHz repetition rate. In addition, high-speed formaldehyde PLIF and chemiluminescence imaging are employed for investigation of autoignition events with a high temporal resolution (5 frames/CAD). The development of autoignition together with fuel or CH₂O distribution are simultaneously visualized using a large number of consecutive images. Prior to the onset of combustion the majority of both fuel and CH₂O are located in the recirculation zone, where the first autoignition also occurs. The ability to record, in excess of 100 PLIF images, in a single cycle brings unique possibilities to follow the in-cylinder processes without the averaging effects caused by cycle-to-cycle variations.     

Ignition mechanisms of pulse detonator initiated scramjet cavity

A fueled cavity in a supersonic crossflow was ignited via a pulse detonator (PD) producing detonation waves that were then decoupled to produce varying degrees of shock-flame separation at the exit of the PD tube. This decoupling allowed for observation of the cavity ignition mechanism, and the key parameters required for successful cavity ignition were identified. Measurements were made using high-frame-rate OH Planar Laser-Induced Fluorescence (PLIF) and schlieren and chemiluminescence imaging. It was shown that the entrainment of high-temperature intermediate species into the forward region of the cavity, immediately behind the step, is the principal criterion for cavity ignition. Both coupled and slightly decoupled detonation cases induced significant OH shedding into the step region, leading to ignition and flame stabilization within the cavity. At conditions where OH shedding into the step region did not occur, cavity ignition was not observed. In coupled and slightly decoupled cases, there is more shedding of OH behind the step due to the greater disturbances created in the flowfield. As the degree of detonation decoupling increases, there is less shedding of OH and therefore a lower likelihood of ignition. Additionally, the time required for cavity combustion to reach its steady-state condition varied with the degree of decoupling of the detonation. Coupled detonation cases were shown to be more disruptive to the cavity and thus required more time to reach steady state than the decoupled cases.     

Studies of autoignition-assisted nonpremixed cool flames

Autoignition-assisted nonpremixed cool flames of diethyl ether (DEE) are investigated in both laminar counterflow and turbulent jet flame configurations. First, the ignition and extinction limits of laminar nonpremixed cool flames of diluted DEE are measured and simulated using detailed kinetic models. The laminar flame measurements are used to validate the kinetic models and guide the turbulent flame measurements. The results show that, below a critical mixture condition, for elevated temperature and dilute mixtures, the cool flame extinction limit and the low-temperature ignition limit merge, leading to autoignition-assisted cool flame stabilization without hysteresis. Based on the findings from the laminar flame experiments, autoignition-assisted turbulent lifted cool flames are established using a Co-flow Axisymmetric Reactor-Assisted Turbulent (CARAT) burner. The lift-off heights of the turbulent cool flames are quantified using formaldehyde planar laser-induced fluorescence. Based on an analogy with autoignition-assisted lifted hot flames, a correlation is proposed such that the autoignition-assisted cool flame lift-off height scales with the product of the flow velocity and the square of the first-stage ignition delay time. Using this scaling, we demonstrate that the kinetic mechanism that most accurately predicts the laminar flame ignition and extinction limits also best predicts the turbulent cool flame lift-off height.