Influence of graphene oxide incorporation and chemical cross‐linking on structure and mechanical properties of layer‐by‐layer assembled poly(Vinyl alcohol)‐Laponite free‐standing films

Functional fillers in multilayered films provide opportunity in tailoring the mechanical properties through chemical cross‐linking. In this study, Laponite‐graphene oxide co‐dispersion was used to incorporate graphene oxide (GO) easily into polyvinyl alcohol (PVA)/Laponite layer‐by‐layer (LBL) films. The LBL films were found to be uniform and the layer thickness increased linearly with number of depositions. The process was extended to a large number of depositions to investigate the macroscopic mechanical properties of the free‐standing films. The LBL films showed remarkable improvements in mechanical properties as compared to neat PVA film. The GO‐incorporated LBL films displayed higher enhancements in the tensile strength, ductility, and toughness as compared to that of PVA/Laponite LBL films, upon chemical cross‐linking. This suggests the advantageous effects of GO incorporation. Interestingly, cross‐linking of LBL films for longer time period (>1 h) and higher temperature (～80 °C) was not found to be much beneficial. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2377–2387     

Facile regulation of glutaraldehyde-modified graphene oxide for preparing free-standing papers and nanocomposite films

Colloidal suspensions of glutaraldehyde (GA) crosslinked or grafted graphene oxide (GO) sheets were fabricated by simply tailoring the feed sequence. The different structures were confirmed by Fourier transform infrared spectra and X-ray diffraction. As demonstration of the utilities, the different colloidal suspensions were used to prepare free-standing papers by flow-directed filtration and poly(vinyl alcohol) (PVA)-based nanocomposite films by casting. Free-standing papers from GA crosslinked GO sheets exhibited better mechanical properties than unmodified GO paper, while nanocomposite films from GA grafted GO exhibit higher tensile strength and Young’s modulus.     

A study on optical limiting properties of Eosin-Y and Eriochrome Black-T dye-doped poly (vinyl alcohol) composite film

A poly (vinyl alcohol) PVA/Eriochrome Black-T (EBT) dye, and PVA/Eosin-Y (EY) dye composite film was prepared using a solution casting process. The dye-doped composite polymer films were characterized by UV–vis spectroscopy. An optical band gap (E_g) of pure PVA reduced from 4.22?eV to 2.80?eV for PVA/EBT film and 2.14?eV for PVA/EY film respectively. This result indicates the occurrence of inter-molecular hydrogen bonding between the –OH functional group in PVA chains and sulfonate (EBT) and carboxyl group (EY) in dye molecules, respectively. Moreover, the experimental result of PVA/EBT and PVA/EY composite film showed the excellent properties of a large scale cut-off filter in the ultraviolet and visible range region.     

Cellulose Nanocrystals (CNCs) Induced Crystallization of Polyvinyl Alcohol (PVA) Super Performing Nanocomposite Films

This study is aimed to explore the properties of cellulose nanocrystals (CNC)/polyvinyl alcohol (PVA) composite films with and without 1,2,3,4‐butane tetracarboxylic acid (BTCA), a nontoxic crosslinker. CNC and CNC‐PVA nanocomposite films are prepared using solution‐casting technique. Differential scanning calorimetry (DSC) analyses show that crosslinking increased the glass transition temperature but reduced the melting temperature and crystallinity. Furthermore, high CNC concentrations in the PVA matrix interfere with PVA crystallinity, whereas in specific ratio between CNC and PVA, two different crystalline structures are observed within the PVA matrix. Film surfaces and fracture topographies characterized using scanning electron microscope indicate that at certain CNC‐PVA ratios, micron‐sized needle‐like crystals have formed. These crystalline structures correlate with the remarkable improvement in mechanical properties of the CNC‐PVA nanocomposite films, that is, enhanced tensile strain and toughness to 570% and 202 MJ m^?3, respectively, as compared to pristine PVA. BTCA enhances the tensile strain, ultimate tensile stress, toughness, and modulus of CNC films compared to pristine CNC films. Water absorption of crosslinked CNC and CNC‐PVA nanocomposite films is significantly reduced, while film transparency is significantly improved as a function of PVA and crosslinker content. The presented results indicate that CNC‐PVA nanocomposite films may find applications in packaging, and though materials applications.     

Polyacrylamide/reduced graphene oxide-Ag nanocomposite as highly efficient antibacterial transparent film

In this study, preparation and characterization of polyacrylamide/reduced graphene oxide-Ag (PAM/rGO-Ag) nanocomposites as a new nanocomposite film were investigated. First, PAM/GO nanocomposite was synthesized by in situ polymerization strategy. Afterward, highly stable and uniformly distributed silver nanoparticles (Ag NPs) have been obtained with PAM/GO nanocomposite as nanoreactors via in situ reduction of silver nitrate (AgNO₃) using sodium borohydride (NaBH₄) as reducing agent. In addition, the prepared PAM/rGO-Ag nanocomposite was thermally annealed in order to achieve high-performance nanocomposite film with antimicrobial activities. The prepared nanocomposite was characterized by XRD, FT-IR, SEM, TEM and TGA. The obtained results demonstrate that the silver nanoparticles were well decorated and dispersed on the graphene oxide nanosheets. In fact, the GO nanosheets and polyacrylamide chains act as a support and stabilize the Ag nanoparticles. Moreover, antimicrobial activities of the films were also examined, and the films containing well-dispersed and stabilized Ag nanoparticles showed outstanding antibacterial activity.     

Hybrid films of polyetherimide containing in situ grown Ag,Pd, and AgPd alloy nanoparticles: Synthesis route,morphology, and gas transport properties

In this study, bimetallic/polymer films are synthesized from polyetherimide (PEI), palladium acetate and silver nitrate for a wide range of total metal amount (from 0 to 30 wt %) and different Ag to Pd molar ratios. Hybrid precursor films are first prepared from polymer/metal complex solutions and the metal nanoparticles are then generated within the PEI matrix by annealing the precursor film under specific conditions. Reference neat PEI films and monometallic films are prepared in the same conditions. Interestingly, formation of AgPd alloys directly within the polymer films is for the first time obtained from a very simple and environmentally friendly route. Based on X‐ray diffraction and transmission electron microscopy analyses, a nanostructuration mechanism is proposed. The interactions of hydrogen towards the nanocomposites are investigated and discussed as a function of the nanoparticle composition. The impact of the nanostructuration is also studied on H₂, CO₂, and He permeation properties. Significant improvement of barrier properties is achieved. The pertinent parameters of the gas transport are identified and modelled for each gas/composite system. Finally, from both morphological and gas transport analyses, it is concluded that in situ generation AgPd alloys with Pd to Ag ratio above 1 leads to very interesting and promising materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1211–1220     

Preparation and Characterization of Chitosan-Graphene Transducer Assembled via Vacuum Assisted Self-assembly (VASA) Method for Trimethylamine Sensing

A reduced graphene oxide/chitosan (rGO/Chi) nanocomposite film for chemoresistive trimethylamine sensing was prepared by solution-phase mixing and deposited on nylon membrane via vacuum assisted self-assembly (VASA) method. The film was analysed using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). The electrical property of the prepared films were measured by four-point probe measurement. Using 0.40% volume fraction (v.f) it was exposed to trimethylamine vapour and its electrical resistance quickly changed. The composite film sensor exhibited linear range from 23 to 230mg/L (r²= 0.9774) and the calculated limit of detection was 20.56mg/L. It exhibited a repeatable response to trimethylamine gas.     

Thermal and photochemical effects on the structure,morphology, thermal and optical properties of PVA/Ni0.04Zn0.96O and PVA/Fe0.03Zn0.97O nanocomposite films

Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O with average diameter of 23 and 19 nm, respectively, have been synthesized by a modified sol–gel method to be used in the preparation of (100 − x)/x poly(vinyl alcohol)/oxide nanocomposite films, with x = 0, 1, 3 and 5 (in wt.%). A 125 W-Hg vapor lamp with emission above 254 nmwas used to irradiate PVA/Ni_0.04Zn_0.96O and PVA/Fe_0.03Zn_0.97O films. The effect on their structural, thermal, morphological and optical properties was studied by TG, DSC, DRX, AFM, UV–vis and PL spectrophotometry. The Ni_0.04Zn_0.96O addition on PVA films decreases the thermal stability of the polymer in inert and in oxidative atmosphere. In contrast, the Fe_0.03Zn_0.97O presence in the PVA films seems to increase the thermal stability of the polymer. The characteristic peak of the crystalline phase of PVA and wurtzite phase of the zinc oxide were identified through X-ray diffraction in both films. The crystallinity of the PVA film increases with UV irradiation and with the presence of Ni_0.04Zn_0.96O and Fe_0.03Zn_0.97O. The roughness of the PVA film was not modified by the addition of the doped oxides; however, it increases after UV irradiation, more significantly in the films containing the oxides. The PVA film exhibits absorption around 280 nm characteristic of π–π^∗ transitions related to carbonyl groups from residuals acetate, while the 95/05 PVA/Ni_0.04Zn_0.96O and 95/05 PVA/Fe_0.03Zn_0.97O nanocomposite films show absorption at the visible region which is characteristics of the band gap reduction of the doped oxides. The photoluminescence of PVA was modified by the presence of the oxides in the film. These nanocomposite films are interesting due to their thermal, mechanical (flexible) properties and low cost of production. In addition they are also able to exhibit peculiar optical properties showing potential to be used in photonic devices, gas sensors and organic solar cell applications.     

Nanocrystalline cellulose acetate (NCCA)/graphene oxide (GO) nanocomposites with enhanced mechanical properties and barrier against water vapor

Highly flexible nanocomposite films of nanocrystalline cellulose acetate (NCCA) and graphene oxide (GO) were synthesized by combining NCCA and GO sheets in a well-controlled manner. By adjusting the GO content, various NCCA/GO nanocomposites with 0.3–1 wt% GO were obtained. Films of these nanocomposites were prepared using the solvent casting method. Microscopic and X-ray diffraction (XRD) measurements demonstrated that the GO nanosheets were uniformly dispersed in the NCCA matrix. Mechanical properties of the composite films were also studied. The best GO composition of the samples tested was 0.8 wt%, giving tensile strength of 157.49 MPa, which represents a 61.92 % enhancement compared with NCCA. On the other hand, the composite films showed improved barrier properties against water vapor. This simple process for preparation of NCCA/GO films is attractive for potential development of high-performance films for electrical and electrochemical applications.     

Preparation and investigation of tribological properties of ultra‐high molecular weight polyethylene (UHMWPE)/graphene oxide

This article has been devoted to investigation of the tribological properties of ultra‐high molecular polyethylene/graphene oxide nanocomposite. The nanocomposite of ultra‐high molecular polyethylene/graphene oxide was prepared with 0.5, 1.5, and 2.5 wt% of graphene oxide and with a molecular weight of 3.7 × 10⁶ by in‐situ polymerization using Ziegler–Natta catalyst. In this method, graphene oxide was used along with magnesium ethoxide as a novel bi‐support of the Ziegler–Natta catalyst. Analyzing the pin‐on‐disk test, the tribological properties of the nanocomposite, such as wear rate and mean friction coefficient, were investigated under the mentioned contents of graphene oxide. The results showed that an increase in graphene oxide content causes a reduction in both wear rate and mean coefficient friction. For instance, by adding only 5 wt% graphene oxide to the polymeric matrix, the wear rate and mean coefficient friction decreased about 34% and 3.8%, respectively. Also, the morphological properties of the nanocomposite were investigated by using X‐ray diffraction and scanning electron microscopy. In addition, thermal properties of the nanocomposite were analyzed using differential scanning calorimetry, under various contents of graphene oxide. The results of the morphological test indicated that the graphene oxide was completely exfoliated into the polymeric matrix without any agglomeration. Copyright © 2016 John Wiley & Sons, Ltd.     

Antimicrobial,mechanical, barrier,and thermal properties of bio‐based poly (butylene adipate‐co‐terephthalate) (PBAT)/Ag2O nanocomposite films for packaging application

Bio‐based nanocomposites of poly (butylene adipate‐co‐terephthalate) (PBAT)/silver oxide (Ag₂O) were prepared by the composite film casting method using chloroform as the solvent. The prepared Ag₂O at different ratios (1, 3, 5, 7, and 10 wt%) is incorporated in the PBAT. The PBAT nanocomposite films were subjected to structural, thermal, mechanical, barrier, and antimicrobial properties. The electron micrographs indicated uniform distribution of Ag₂O in the PBAT matrix. However, the images indicated agglomeration of Ag₂O particles at 10 wt% loading. The thermal stability of the nanocomposite films increased with Ag₂O content. The tensile strength and elongation of the composite films were found to be higher than those of PBAT and increased with Ag₂O content up to 7 wt%. The PBAT‐based nanocomposite films showed the lower oxygen and water vapor permeability when compared to the PBAT film. Antimicrobial studies were performed against two food pathogenic bacteria, namely, Klebsiella pneumonia and Staphylococcus aureus.     

Mechanical properties and degradation studies of poly(D,L‐lactide‐co‐glycolide) 50:50/graphene oxide nanocomposite films

Poly(D,L‐lactide‐co‐glycolide) 50:50 (PLGA)/graphene oxide (GO) nanocomposite films were prepared with various GO weight fractions. A significant enhancement of mechanical properties of the PLGA/GO nanocomposite films was obtained with GO weight fractions. The incorporation of only 5 wt% of GO resulted in an ~2.5‐fold and ~4.7‐fold increase in the tensile strength and Young's modulus of PLGA, respectively. The thermomechanical behaviors of composite films were investigated by dynamic mechanical analysis. Results indicated that the values of T_g and storage moduli of the PLGA/GO composites were higher than those of the pristine PLGA. The improvement in oxygen barrier properties of composites was presumably attributed to the filler effect of the randomly dispersed GO throughout the PLGA matrix. In this work, we also studied in vitro biodegradation behavior. PLGA/GO composite films were hydrolyzed at 37°C for periods up to 49 days. Because of the presence of GO nanosheets, degradation of composite films took place more slowly with increasing GO amounts. Copyright © 2013 John Wiley & Sons, Ltd.     

Biodegradable graphene oxide nanosheets/poly-(butylene adipate-co-terephthalate) nanocomposite film with enhanced gas and water vapor barrier properties

Poly-(butylene adipate-co-terephthalate) (PBAT) has captured significant interest by dint of its biodegradability, superb ductility, promising processing properties and good final properties, but the insufficient barrier performance limits its application, especially in packaging field. In the present work, improved barrier properties of PBAT films were obtained by introducing an extremely low amount of graphene oxide nanosheets (GONS). O₂ and water vapor permeability coefficients were decreased by more than 70% and 36% at the GONS loading of 0.35 vol%, respectively. The enhanced barrier performance was ascribed to the outstanding impermeability and well dispersion of GONS as well as the strong interfacial adhesion between GONS and PBAT matrix. Furthermore, tensile strength and Young's modulus of GONS/PBAT nanocomposite rise up to 27.8 MPa and 72.2 MPa from 24.6 MPa to 58.5 MPa of neat PBAT, respectively, showing a prominent increase of mechanical properties compared to neat PBAT. The incorporation of GONS also endowed PBAT matrix with an excellent thermal stability. These findings provide a significant guidance for fabricating high barrier films on a large scale.     

Polymer/graphite nanocomposites: Effect of reducing the functional groups of graphite oxide on water barrier properties

Water barrier properties (i.e., water resistance) of poly(styrene-co-butyl acrylate)/graphite oxide (poly(St-co-BA)/GO) nanocomposites were studied using hydrophobicity and permeability analysis. Poly(St-co-BA)/GO nanocomposite latices were obtained using the miniemulsion polymerization technique. The hydrophobicity of the synthesized nanocomposites was studied using contact angle measurements, while water permeability was obtained by measuring the moisture vapor transmission rate (MVTR). The nanocomposites were treated with hydrazine hydrate in order to reduce the functional groups on graphite oxide (GO). The focus was on determining the effect of reducing the functional groups of GO on the water barrier properties of its polymer nanocomposites. In general, the nanolayered graphene platelets in GO and RGO resulted in lower water permeation in the final films compared to pure polymer. However, results showed that nanocomposites containing the reduced-GO (RGO) had better water resistance and barrier properties compared to those made with unreduced GO (i.e., as-prepared GO). The nanocomposites containing RGO had higher hydrophobicity and lower water uptake and MVTR compared to those made with as-prepared GO, resulting in better barrier performance. This was attributed to the high hydrophobic nature of the RGO, which exhibited lower water solubility that resulted in films with lower MVTR values compared to those made with as-prepared GO.     

Preparation and characterization of silver-modified poly(vinyl alcohol)/polyethyleneimine hybrids as a chemical and biological protective material

Nanohybrid membranes based on the silver (Ag) and a poly(vinyl alcohol)/polyethyleneimine (PVA/PEI) blend were prepared by an in-situ reduction method, in which the silver nitrate, PVA and PEI acted as precursor, linker and polyamine reductant, respectively. The objective of the study was to develop and evaluate permeable membranes (PVA/PEI) impregnated with Ag nanoparticulates that can protect against simulants of chemical and biological warfare agents. The physical properties of the PVA/PEI-Ag hybrids were examined using SEM, TEM, TGA, and UV-vis spectroscopy, the results indicated that the Ag was incorporated in the PVA/PEI matrix after impregnation. The Ag content and surface morphology of the PVA/PEI-Ag hybrids depended on the initial concentration of AgNO₃. The chemical barrier properties against 2-chloroethyl-ethyl sulfide (CEES) were investigated based on static-diffusion method with gas chromatograph (GC). The antibacterial effects of the PVA/PEI-Ag hybrids were assessed by the zone of inhibition, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and plate-counting methods. The results of this study showed that PVA/PEI-Ag hybrids that act against simulants of chemical and biological weapons while retaining their ability to transmit moisture vapor could be obtained.     

Thermal,mechanical and water barrier properties of graphene oxide/polyvinyl alcohol/polyol composite films

The novel polymer composite of polyvinyl alcohol (PVA), polyol(PO) and graphene oxide (GO) was used to prepare the PVA/PO and GO/PVA/PO with different weight percents of GO (0.5 and 1% denoted as (0.5 wt%)GO/PVA/PO and (1 wt%)GO/PVA/PO, respectively) through solution casting blend technique. The structure–properties of all used films were confirmed by scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA) and mechanical properties. The SEM results exhibited the uniform and homogeneous dispersion of GO in the PVA/PO blend matrix. The TEM and XRD analysis confirmed the structure and exfoliation of GO nanosheets, respectively. Thermal stability suggested that (0.5 wt%)GO/PVA/PO and (1 wt%) GO/PVA/PO films are more stable than PVA/PO. The tensile strength of (0.5 wt%)GO/PVA/PO and (1 wt%)GO/PVA/PO films reached 270.5% and 1349.6%, respectively, which are higher than that of the PVA/PO film. The decrease in the water absorption (WA) of GO/PVA/PO was found from 110.5 to 38.4%. The physico-mechanical properties of used films suggested that the prepared GO/PVA/PO blend composite films can be applied in food packaging areas.     

Preparation and properties of polyimide/graphene oxide nanocomposite films with Mg ion crosslinker

Polyimide(PI)/graphene oxide(GO) nanocomposite films were prepared by chemical cross-linking using small amounts of divalent Mg ions. The PI/GO nanocomposites showed enhanced tensile properties compared to pristine PI due to the presence of exfoliated GO in the PI matrix as well as crosslinking between poly(amic acid) (PAA), which is a precursor of PI, and GO by Mg ions. The hydrogen bonds between PAA and GO suppressed the phase separation between PI and GO, and small amounts of Mg ions can bond between the oxygen functional groups and carboxylate groups of GO and PAA.     

Effect of electrostatic forces control on the structure and properties of polyaniline/graphene oxide nanocomposite

The effects of electrostatic forces (EF), control on the morphology, structure, and electrochemical properties of polyaniline, PANI/graphene oxide (GO), nanocomposites prepared by interfacial electropolymerization (IEP), are studied in this work. FESEM images showed that the IEP method can form the PANI/GO nanocomposites when the EF-control has been found mainly on the PANI nanofibers formation and growth on the GO film surface; and the EF-enhancement can form PANI nanofibers with small nano-diameter, longer length, uniform morphology, high order and well orientation as compared with the EF-reduction-formed sample. The EF-enhancement-formed PANI/GO nanocomposite showed improved electrochemical properties than that of the EF-reduction-formed sample due to the EF-enhancement that enhances the C–N structure for PANI/GO nanocomposite.     

Eco-friendly synthesis, characterization and properties of a sodium carboxymethyl cellulose/graphene oxide nanocomposite film

A previously unreported nanocomposite (CMC/GO) high-performance film was prepared by a simple solution mixing-evaporation method. The structure, thermal stability, and mechanical properties of the composite films were investigated by wide-angle X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, thermogravimetry analysis, and mechanical testing. The results obtained from these different studies revealed that CMC and graphene oxide were able to form a homogeneous mixture. Compared with pure CMC, the tensile strength and Young’s modulus of the graphene-based materials were improved significantly upon incorporation of 1 wt% graphene oxide by 67 ± 6 % and 148 ± 5 %, respectively. In addition, the DMA composite films also showed a high storage modulus up to 250 °C.     

Spectroscopic and Discharge Studies on Graphene Oxide Doped PVA/PVP Blend Nanocomposite Polymer Films

Graphene oxide (GO) nanoparticles were synthesized by modified Hummers method. The synthesized GO nanoparticles were incorporated in polyvinyl alcohol/polyvinyl pyrrolidone (PVA/PVP) blend polymers for the preparation of nanocomposite polymer films by solution cast technique. Different characterizations such as XRD, UV–Vis and FTIR were carried-out on to the prepared nanocomposite polymer films. The thermal analysis of the films was studied by DSC. The morphology of PVA/PVP:GO polymer films confirms GO was exfoliated within the PVA/PVP matrix and also reveals the heterogeneous phase of nanocomposite polymer electrolyte systems. From the conductivity studies the highest conductivity of PVA/PVP: GO (0.45: 0.3) was found to be 8.05 × 10^–4 S/cm at room temperature. Solid state battery has been fabricated with the configuration of Mg⁺/(PVA/PVP:GO)/(I₂ + C + electrolyte) and its cell parameters were calculated for a constant load of 100 kΩ.