Unambiguous NMR Structural Determination of (+)-Catechin—Laccase Dimeric Reaction Products as Potential Markers of Grape and Wine Oxidation

(+)-Catechin—laccase oxidation dimeric standards were hemi-synthesized using laccase from Trametes versicolor in a water-ethanol solution at pH 3.6. Eight fractions corresponding to eight potential oxidation dimeric products were detected. The fractions profiles were compared with profiles obtained with two other oxidoreductases: polyphenoloxidase extracted from grapes and laccase from Botrytis cinerea. The profiles were very similar, although some minor differences suggested possible dissimilarities in the reactivity of these enzymes. Five fractions were then isolated and analyzed by 1D and 2D NMR spectroscopy. The addition of traces of cadmium nitrate in the samples solubilized in acetone-d₆ led to fully resolved NMR signals of phenolic protons, allowing the unambiguous structural determination of six reaction products, one of the fractions containing two enantiomers. These products can further be used as oxidation markers to investigate their presence and evolution in wine during winemaking and wine ageing.     

Deterioration of highly filled EPDM rubber by thermal ageing in air: Kinetics and non-destructive monitoring

The effects of air ageing at different temperatures between 110 and 170 °C on cable transit seals based on highly filled EPDM rubber used in nuclear power plants were studied. The changes of the macroscopic mechanical properties (Young's modulus, indentation modulus and strain-at-break) were in accordance with the Arrhenius equation with an activation energy of 110 kJ mol⁻¹. Profiling to assess the structure and property gradients within aged blocks was performed via IR spectroscopy, micro-indentation, gravimetric analysis of n-heptane-extracted samples and non-invasive portable NMR spectroscopy. A previously developed methodology was used to separate the deterioration into three different processes: polymer oxidation that was diffusion-limited at all temperatures, migration of low-molar-mass species to the surrounding media and anaerobic changes to the polymer network. The methodology allowed the assessment of the kinetics (rate as a function of time and temperature) of the different processes. It was noticed that polymer oxidation yielded more crosslinking at higher temperatures than at lower temperatures. The data obtained by both the portable NMR (a non-invasive method) and the indentation modulus profiling showed correlations with strain-at-break data, indicating their usefulness as condition monitoring methods.     

The ageing phenomenon of polyethersulphone hollow fibre membranes for gas separation and their characteristics

We have studied the ageing behaviour of PES/NMP (polyethersulphone/N-methyl pyrrolidone) hollow fibres for gas separation that were prepared from 35% and 37% dope. The effect of ageing on hollow fibres spun from low and high shear rate (103 vs. 862 s⁻¹) has also been investigated, in terms of their transport properties (permeation flux and separation performance), thermal, mechanical and tensile properties. Hollow fibres in this study were aged for around four months in ambient air at room temperature prior to testing.In general, the gas permeation flux drops steeply during the 40 days following fabrication and levels off thereafter. The O₂/N₂ selectivity decreases slightly over time. Hollow fibres spun with high shear rate seem to age faster than those spun with low shear rate. The gas fluxes of both membranes were found to follow a log–log relationship with ageing time. For almost all the gases used in this study, the gas flux decay rate, calculated from the slope of the log–log plot of gas flux vs. ageing, is higher for membranes spun with high shear rate. The effect of shear rate on ageing is less significant for smaller gas molecules that travel faster such as He and H₂. No significant effect of ageing on gas selectivity was observed. Experimental results also indicate that the storage modulus and loss modulus of the hollow fibres increase with ageing. Hollow fibres spun with high shear rates give a slightly higher increase in these moduli than those spun at low shear rates. Surprisingly, tangent δ (energy dissipation) and glass transitional temperature are not sensitive to ageing. We also found that the tensile yield strength and Young's modulus of the hollow fibres increase slightly with ageing. The hollow fibre membranes spun at high shear rates also show a higher increment in tensile yield stress. However, the change in Young's modulus due to ageing was similar for fibres spun with high and low shear rates.     

Dielectric spectroscopy as a condition monitoring technique for cable insulation based on crosslinked polyethylene

Dielectric spectroscopy was evaluated as a condition monitoring technique for aged polyethylene electrical insulation in nuclear power plants. Bare core insulations of crosslinked polyethylene were aged at 55 and 85 °C under exposure to ⁶⁰Co γ-radiation at different dose rates (0.42, 0.76 and 1.06 kGy h⁻¹) to different total doses. The samples were studied by dielectric spectroscopy and tensile testing, and the crystallinity, mass fraction of soluble component and density were determined. The oxidation profiles along the depth of the insulations were assessed by infrared microscopy. The aged samples showed an increase in both the real and imaginary parts of the dielectric permittivity over the whole frequency range studied, an increase in the mass fraction of soluble component and in the material density, and a decrease in the strain-at-break. The imaginary part of the dielectric permittivity at 100 kHz increased in a linear fashion with increasing material density, the latter being strictly related to the extent of oxidation of the material according to infrared spectroscopy and differential scanning calorimetry. The generic relationship between the imaginary part of the permittivity and the density included all the data obtained under different ageing conditions. The results suggest that dielectric spectroscopy can be used for in-situ measurements of the degree of oxidation of polyethylene cables, in order to obtain information about the condition of the cable insulation to enable the remaining lifetime to be predicted.     

Preparation of Alumina Supported Palladium Catalysts by Sol-Gel Method

The chemical reactivity of the aluminium-sec-butoxide (ASB) and the palladium acetylacetonate Pd(acac)₂, used as precursors for the preparation of the alumina supported palladium catalysts by sol-gel method was investigated by the spectroscopic study of the precursor mixture during ageing, using FTIR, UV-VIS and ²⁷Al NMR. The obtaind results showed that acetylacetonate ligands were linked to aluminum when the mixture was aged at 40°C. This was proved by the bands observed at 1530 and 1600 cm^–1 in the FTIR spectra, the band obtained at 289 nm in the UV-VIS spectra and the ²⁷Al NMR sharp peak at 3 ppm. Furthermore, in order to avoid the Pd(acac)₂ reduction to metallic palladium by the SB occurring when the mixture is aged for 3 h, an optimum ageing time should be selected. The precursors modification and the preservation of the palladium oxidation state during ageing could be the required conditions to create a bond between palladium and aluminium during the gelation step. This should be the reason of the thermal stability improvement of the alumina supported palladium catalyst prepared by the sol-gel method.     

Influence of accelerated ageing on the physico-mechanical properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid) (PLA) composites

30 wt% aligned untreated long hemp fibre/PLA (AUL) and aligned alkali treated long hemp fibre/PLA (AAL) composites were produced by film stacking and subjected to accelerated ageing. Accelerated ageing was carried out using UV irradiation and water spray at 50 °C for four different time intervals (250, 500, 750 and 1000 h). After accelerated ageing, tensile strength (TS), flexural strength, Young's modulus (YM), flexural modulus and mode I fracture toughness (K_Ic) were found to decrease and impact strength (IS) was found to increase for both AUL and AAL composites. AUL composites had greatest overall reduction in mechanical properties than that for AAL composites upon exposure to accelerated ageing environment. FTIR analysis and crystallinity contents of the accelerated aged composites support the results of the deterioration of mechanical properties upon exposure to accelerated ageing environment.     

Modification of new polymer materials based on aminostyrene by irradiation

The ultra-violet (UV) irradiation induced modification of the mechanical and optical properties of several polymer composites containing 4-aminostyrene and glycidyl methacrylate and their dependences on radiation dose, structure and ageing have been investigated. The nano- and microindentation techniques were used for determination of the mechanical parameters of as-grown and irradiated materials. The light-induced structural changes result in an increase of the hardness and elastic modulus of the polymer layers up to five and three times, respectively. It is also shown that the influence of polymer structure is significant. The conditions for improvement, degradation and stabilization of physical properties by UV irradiation were established. Load and depth sensing indentation has proved to be a powerful tool for an accurate estimation of mechanical properties of cross-linking polymer compositions. Variable-energy positron annihilation spectroscopy (slow-positron beam technique) was developed to measure defect depth profiles in the near-surface region. The increase of S-parameter with the increase of nano-hardness and elastic modulus has been determined for these materials.     

NMR relaxation data for quality characterization of Balsamic vinegar of Modena

In this paper, 22 samples consisting of Balsamic vinegar of Modena and two Traditional Balsamic vinegar of Modena samples have been analyzed by means of ¹H NMR spectroscopy. Some selected resonances have been used for quantification and for T1 (spin-lattice relaxation time) measurements. Statistical protocols applied to NMR data for quantification of selected resonances revealed the possibility to differentiate the samples according to their ageing process. Additionally, T1 measurements revealed a strong correlation with the ageing process and these new data were added for improving the statistical model, which was used to predict T1 relaxation time of selected compounds for Balsamic vinegar samples. Our results indicate that the use of NMR data and statistical methods is a valid approach that can be successfully used for ageing characterization of Balsamic vinegar of Modena samples.     

Long-term performance of poly(vinyl chloride) cables. Part 1: Mechanical and electrical performances

Cables insulated with plasticized poly(vinyl chloride) were aged in air at temperatures between 80 °C and 180 °C and their conditions were assessed by indenter modulus measurements, tensile testing, infrared (IR) spectroscopy and differential scanning calorimetry (DSC). Electrical testing of oven-aged cable samples was performed in order to relate the electrical functionality during a high-energy line break (HELB) to the mechanical properties and to establish a lifetime criterion. The mechanical data taken at room temperature after ageing could be superimposed with regard to ageing time and temperature. The ageing-temperature shift factor showed an Arrhenius temperature dependence. The jacketing material showed an immediate increase in stiffness (indenter modulus and Young's modulus) and a decrease in the strain at break on ageing; these changes were dominated by loss of plasticizer by migration which was confirmed by IR spectroscopy and DSC. The core insulation showed smaller changes in these mechanical parameters; the loss of plasticizer by migration was greatly retarded by the closed environment, according to data obtained by IR spectroscopy and DSC, and the changes in the mechanical parameters were due to chemical degradation (dehydrochlorination). A comparison of data obtained from this study and data from other studies indicates that extrapolation of data for the jacketing insulation can be performed according to the Arrhenius equation even down to service temperatures (20-50 °C). The low-temperature deterioration of the jacketing is, according to this scheme, dominated by loss of plasticizer by migration.     

Sponge Phase Producing Porous CeO2 for Catalytic Oxidation of CO

The aggregation behavior of mixtures of the alkaline amino acid L ‐Arginine (L ‐Arg) and bis(2‐ethylhexyl)phosphoric acid (DEHPA) in water was studied in detail. At a fixed L ‐Arg concentration, a phase sequence of micellar phase (L₁ phase), vesicle phase (L_αv phase), planar lamellar phase (L_αl phase), and sponge phase (L₃ phase) was obtained with increasing DEHPA concentration due to changes in the packing parameter. The phase transition of the lamellar structures was determined by freeze‐fracture TEM and ²H NMR spectroscopy. Rheological measurements reflected the phase transition through significant variations of both the elastic modulus and the viscous modulus. Porous CeO₂ materials were produced by utilizing the L₃ phase as template, and the porous CeO₂ exhibited excellent catalytic oxidation activity toward CO due to its high surface area, which provides more active sites for CO conversion.     

NMR relaxation study of the phase transitions and relaxation mechanisms of the alums MCr(SO4)2·12H2O (M=Rb and Cs) single crystals

The physical properties and phase transition mechanisms of MCr(SO₄)₂·12H₂O (M=Rb and Cs) single crystals have been investigated. The phase transition temperatures, NMR spectra, and the spin-lattice relaxation times T₁ of the ⁸⁷Rb and ¹³³Cs nuclei in the two crystals were determined using DSC and FT NMR spectroscopy. The resonance lines and relaxation times of the ⁸⁷Rb and ¹³³Cs nuclei undergo significant changes at the phase transition temperatures. The sudden changes in the splitting of the Rb and Cs resonance lines are attributed to changes in the local symmetry of their sites, and the changes in the temperature dependences of T₁ are related to variations in the symmetry of the octahedra of water molecules surrounding Rb⁺ and Cs⁺. We also compared these ⁸⁷Rb and ¹³³Cs NMR results with those obtained for the trivalent cations Cr and Al in MCr(SO₄)₂·12H₂O and MAl(SO₄)₂·12H₂O crystals.     

Study on the influence of ageing on chemical and mechanical properties of N,N′-dimethyl-N,N′-diphenylcarbamide stabilized propellants

Double-base propellants undergo chemical, physical and mechanical changes upon ageing, leading to changes in ballistic performance and presenting explosive hazards. This report studies the variation of chemical and mechanical properties of aged N,N′-dimethyl-N,N′-diphenylcarbamide (methyl centralite) stabilized propellants in order to simulate and evaluate the natural ageing throughout the artificial one. Therefore, a comparative study of stabilizer depletion, plasticizers content, heat of combustion and mechanical properties such as storage modulus, loss modulus and damping of naturally and artificially aged propellants has been carried out by the following techniques: high-performance liquid chromatography (HPLC), thermogravimetric analyzer (TG), calorimeter of combustion and dynamic mechanical analyzer (DMA), respectively. The results obtained show that all properties are closely connected. In addition, the determination of stabilizer depletion, plasticizers evaporation, decrease of heat of combustion and mechanical properties are very useful for a better understanding of the decomposition and ageing behaviour of propellants. The HPLC investigation of stabilizer has shown good stability of the propellants. The results obtained for DMA have shown that some considerable changes of the mechanical and viscoelastic properties of the propellants occurred during ageing. These results confirm the results obtained by TG for the reduction of the nitroglycerine amount and the decrease of the heat of combustion.     

Condition monitoring methods applied to degradation of chlorosulfonated polyethylene cable jacketing materials

Three promising polymer material condition monitoring (CM) methods were applied to eight commercial chlorosulfonated polyethylene cable jacket materials aged under both elevated temperature and high-energy radiation conditions. The CM methods examined, cross-sectional modulus profiling, solvent uptake and NMR T₂ relaxation time measurements of solvent-swelled samples, are closely related since they are all strongly influenced by the changes in overall crosslink density of the materials. Each approach was found to correlate well with ultimate tensile elongation measurements, the most widely used method for following degradation of elastomeric materials. In addition approximately universal failure criteria were found to be applicable for the modulus profiling and solvent uptake measurements, independent of the CSPE material examined and its degradation environment. For an arbitrarily assumed elongation “failure” criterion of 50% absolute, the CSPE materials typically reached “failure” when the modulus increased to ∼35 MPa and the uptake factor in p-xylene decreased to ∼1.6.     

Critical considerations for the accelerated ageing of high-density polyethylene potable water materials

Accelerated ageing conditions with chlorinated water were identified that minimize variations in solution chemistry and water sorption, and that also enable the interpretation of HDPE physical and chemical changes during 20 week (3884 h) immersion periods. Of the ten conditions tested, three conditions with an alkalinity concentration of 50 ppm as CaCO₃ at pH 6.5 and at 23 and 37 °C performed best. These three conditions exhibited stable pH, free available chlorine, and alkalinity concentration during 20 weeks of HDPE immersion with 72 h changes of ageing solution. HDPE was periodically characterized using differential scanning calorimetry, thermogravimetric analysis, tensile analysis, a density gradient column, moisture analysis, and optical and infrared spectroscopy. Formation of surface carbonyl bonds and gradual reductions in oxidation induction time were detected, as well as water sorption into HDPE. Ageing solution and water sorption monitoring recommendations from this work should be incorporated into accelerated ageing protocols and considered when characterizing aged PE drinking water pipe.     

Oxidation induced changes in viscoelastic properties of a thermostable epoxy matrix

The thermal ageing of a neat epoxy matrix has been studied at 473 K in air by three complementary analytical techniques: optical microscopy, dynamic mechanical analysis and nano-indentation. Thermal oxidation is restricted in a superficial layer of about 195 μm of maximal thickness. It consists in a predominant chain scission process involving, in particular, chemical groups whose β motions have the highest degree of cooperativity and thus, are responsible for the high temperature side of β dissipation band. As a result, chain scissions decrease catastrophically the glass transition temperature, but also increase significantly the storage modulus at glassy plateau between T _β and T _α. This phenomenon is called “internal antiplasticization”. Starting from these observations, the Di Marzio and Gilbert’s theories have been used in order to establish relationships between the glass transition temperature and number of chain scissions, and between the storage modulus and β transition activity respectively. The challenge is now to establish a relationship between the β transition activity and the concentration of the corresponding chemical groups.     

Loss of stability by migration and chemical reaction of Santonox R in branched polyethylene under anaerobic and aerobic conditions

Plaques of branched polyethylene stabilized with 0.1 wt.% 4,4′-thiobis(6-tert-butyl-3-methylphenol) [Santonox^® R] were aged at different temperatures between 75 and 95 °C in anaerobic (nitrogen or water) and aerobic (air or water saturated with air) media. Antioxidant concentration profiles were obtained by oxidation induction time (OIT) measurements using differential scanning calorimetry. Results obtained by high performance liquid chromatography of extracts confirmed that the gradual decrease in OIT with increasing ageing time was due to migration of antioxidant to the surrounding medium. The antioxidant concentration profiles along the plaque thickness direction were flat in the plaques aged in the non-aqueous media indicating that the migration of antioxidant to the surrounding medium was controlled by the low evaporation rate at the material boundary. Crystals of antioxidant were detected by optical microscopy on the samples exposed to nitrogen. The similarity of the antioxidant concentration profiles obtained after ageing in nitrogen and in air suggested that the fraction of the antioxidant oxidized is negligible in comparison with the loss of antioxidant by migration to the surrounding media. The antioxidant concentration profiles along the plaque thickness direction obtained after ageing in water were less flat, suggesting faster dissolution in the water phase than evaporation in the case of non-aqueous ageing. The antioxidant diffusivity could be determined from the aqueous experiments and was in reasonable agreement with data reported by Moisan. For the samples exposed to water, the loss of antioxidant was faster from the samples exposed to water saturated with air. This difference is attributed to a faster degradation of the antioxidant in the oxygen-containing water phase increasing the mass transport from the polymer phase boundary to the water phase.     

Oxidation of cyclopentane-1,2-dione: a study with O labeled reagents

The asymmetric oxidation of 3-alkyl-cyclopentane-1,2-diones with the Ti(OⁱPr)₄/tartaric ester/t-BuOOH complex, which gives, in a cascade process, highly enantiomerically enriched γ-lactone acids, was studied by ¹⁸O isotopic labeling in the substrate and in the oxidant. The path of the labeled atoms was followed by ¹³C NMR spectroscopy. It was found that the oxidative ring cleavage of 1,2-dione proceeds via a Baeyer-Villiger-type oxidation mechanism.     

Monitoring of metabolic profiling and water status of Hayward kiwifruits by nuclear magnetic resonance

The metabolic profiling of kiwifruit (Actinidia deliciosa, Hayward cultivar) aqueous extracts and the water status of entire kiwifruits were monitored over the season (June-December) using nuclear magnetic resonance (NMR) methodologies. The metabolic profiling of aqueous kiwifruit extracts was investigated by means of high field NMR spectroscopy. A large number of water-soluble metabolites were assigned by means of 1D and 2D NMR experiments. The change in the metabolic profiles monitored over the season allowed the kiwifruit development to be investigated. Specific temporal trends of aminoacids, sugars, organic acids and other metabolites were observed.The water status of kiwifruits was monitored directly on the intact fruit measuring the T₂ spin-spin relaxation time by means of a portable unilateral NMR instrument, fully non-invasive. Again, clear trends of the relaxation time were observed during the monitoring period.The results show that the monitoring of the metabolic profiling and the monitoring of the water status are two complementary means suitable to have a complete view of the investigated fruit.     

Kinetics and network structure of thermally cured vinyl ester resins

Bisphenol-A diglycidyl ether dimethacrylate was blended with styrene at varying concentrations and this model vinyl ester resin (VER) was compared with two commercial VERs. The VERs were characterized using gravimetry, FTIR spectroscopy, NMR spectroscopy, differential scanning calorimetry (DSC) and DMTA. NMR spectroscopy differentiated between a novolac epoxy-based multimethacrylate oligomer and the two bisphenol-A epoxy-based dimethacrylate oligomers. Reaction kinetics were studied using scanning and isothermal DSC and isothermal FTIR spectroscopy using benzoyl peroxide as the thermal initiator. The presence of oxygen was found to inhibit significantly the polymerization. Increased initiator concentration raised the rate of isothermal polymerization, but did not affect the final conversion while increased styrene concentration reduced the polymerization rate constant and increased the total conversion. This was interpreted in terms of the variations in the termination rate and the stability of the styryl radical on the cure rate and the effect of vitrification on the extent of cure. From measurements of the dynamic mechanical properties as a function of temperature, the breadth of the glass transition tan δ curve and the magnitude of the rubbery modulus was found to increase while the tan δ maximum decreased with increased crosslink density. The T_g, as measured by DSC, and the temperature of the tan δ maximum, as measured by DMTA, were not significantly affected by the styrene content in the resin per se, but were dependent on the combined effects of composition and crosslink density of the network.     

Photo- and thermal-oxidation of polyethylene: Comparison of mechanisms and influence of unsaturation content

The behaviour of polyethylene with different contents in vinyl and t-vinylene groups have been studied by photooxidation with λ ≥ 300 nm light or by thermooxidation at a temperature of 100 °C. The oxidation was studied by infrared spectroscopy and it was shown that the same oxidation products were obtained, but with different relative concentrations depending on the conditions of ageing, i.e. photochemical or thermal conditions. The mechanisms by which the oxidation products are formed were recalled. The differences between photo- and thermo-oxidation were evidenced on the basis of the stability of ketones that do not accumulate in photochemical conditions, as a result of Norrish reactions. The influence of the initial amount of unsaturated groups on the rates of oxidation was characterized. It was shown that the concentration of unsaturations had no effect on the rate of photooxidation but dramatically influenced the stability in thermooxidative conditions.