A sensitive spectrophotometric determination of atrazine in micellar medium and its application in environmental samples

A sensitive analytical procedure based on solid phase extractive-spectrophotometry has been established for the determination of the widely used herbicide atrazine .The method is based on the Konig reaction in which atrazine reacts with pyridine reagent to form a quaternary pyridinium halide, which further forms glutaconic aldehyde in the presence of alkali. Glutaconic aldehyde is subsequently coupled with 4-aminoacetanilide in the micellar medium of anionic surfactant sodium dodecyl sulphate to give a yellow-orange dye. The produced dye was enriched on a C₁₈ cartridge and is measured spectrophotometrically at 460 nm. The sensitivity and selectivity of the method was largely enhanced in the micellar media and SPE on the C₁₈ cartridge and avoids the use of toxic solvents. Beer’s law was obeyed in the range 0.012–0.12 μg mL^?1. Molar absorptivity and Sandell’s sensitivity were found to be 1.52 × 10⁶ L mol^? 1 cm^?1 and 0.0002 μg cm^?2, respectively. The limit of detection and quantification were 0.001 and 0.003 μg mL^?1, respectively. The proposed method was applied successfully for the determination of atrazine in environmental and biological samples with a recovery range of 96–101 %. The method was found to be free from interference of a large number of foreign species. The accuracy and reliability of the method was further established by parallel determination by the reference method, and by recovery studies.     

A Sensitive Colorimetric Reagent for the Determination of Cyanide and Hydrogen Cyanide in Various Environmental Samples

A sensitive reagent system is proposed for the determination of cyanide and hydrogen cyanide in various environmental samples. The method is based on the conversion of cyanide into cyanogen bromide followed by its reaction with pyridine to form glutaconic aldehyde. The glutaconic aldehyde so formed is coupled with p‐aminoacetophenone forming yellow‐orange polymethine dye measured at 445 nm. The colour system obeys Beer's law in the range of 0.01–0.16 ppm of cyanide inaqeous phase and 0.002–0.03 ppm in extracting system. The molar absorptivity and Sandell's sensitivity were found to be 6.51 × 10⁵ l mol^?1 cm^?1 and 0.0001 μg cm^?2, respectively. The method has been successfully applied for the determination of cyanide in air, industrial effluent, biological samples, and in the pesticide acrylonitrile.     

Selective determination of selenium(IV) from environmental samples by UV-visible spectrophotometry using O-methoxyphenyl thiourea as a chelating ligand

A selective extraction–spectrophotometric method has been developed for determination of selenium(IV) using O-methoxyphenyl thiourea (OMePT) as a chelating agent. The basis of the proposed method is the spectrophotometric determination of selenium(IV)–OMePT complex obtained after extraction of selenium(IV) from 3.5 M hydrochloric acid media using OMePT in chloroform solvent. The complex shows maximum absorbance at 350 nm against the reagent blank. The Beer’s law was obeyed over the concentration range 5–60 µg mL^?1 of selenium(IV). The optimum concentration range was 20–50 µg mL^?1 as evaluated from Ringbom’s plot. The molar absorptivity and Sandell’s sensitivity of the selenium(IV)–OMePT complex in chloroform were 3.312 × 10² L mol^?1cm^?1 and 0.2384 µg cm^?2, respectively. The composition of selenium(IV)–OMePT complex was 1:2 established from slope ratio method, mole ratio method and Job’s continuous variation method. The complex was stable for more than 72 h. The interfering effect of various foreign ions was studied and suitable masking agents were used wherever necessary to enhance the selectivity of the developed method. The proposed method was successfully applied for the determination of selenium(IV) from real samples, viz. pharmaceutical formulations, shampoo, vegetable sample, synthetic mixtures and environmental samples. Repetition of the method was checked by finding the relative standard deviation (RSD) for 10 determinations which was 0.35%.     

Trace Determination of Copper in Foodstuffs and Biological Samples

Abstract

A new heterocyclic bis-azo dye, 2,6-bis(4-sulfo-1-hydroxy-2-naphthylazo)pyridine, sodium salt (PBS), has been prepared and developed as a sensitive and highly selective chromogenic reagent for spectrophotometric determination of copper. The reagent is found to give a 1:2 (M/L) complex at pH 6.0. Beer's law is followed up to 1.8 ppm with an optimal concentration range between 0.2 and 1.4 ppm. Sandell's sensitivity of the color reaction was calculated to be 0.0013 µg cm^?2 with molar absorptivity of 4.9 × 10⁴ l·mol^?1 cm^?1 at 572 nm. The interfering effects of various cations and anions were also studied. The proposed method was successfully applied to the determination of copper(II) in milk, tea samples, cereals, and legume grains consumed by the Indian vegetarians and in some biological samples. Comparison of the results with those obtained using an atomic absorption spectrophotometer tested the validity of the method.     

Determination of reference interval values for inorganic elements in whole blood samples of humans and laboratory animals by X-ray fluorescence spectrometry

Inorganic elements are responsible for essential bodily functions, such as osmotic regulation, cardiac frequency and contractibility, blood clotting and neuromuscular excitability. The determination of inorganic elements in corporeal fluids such as blood, serum, plasma and urine is used as a monitor for a part or the whole organism; their values, then, are compared with reference interval values. In this study, the energy dispersive X-ray fluorescence spectrometry (EDXRF), applying the Fundamental Parameters method, for the determination of inorganic elements in whole blood samples from humans and laboratory animals, was used. Peripheral blood samples were collected and, before coagulation, 100 μL of sample were deposited onto Whatman No. 41 filter paper and dried, using infrared spotlight. The reference interval values for healthy Brazilian population of Na were found to be 1,788–1,826 μg g^?1, of Mg 63–75 μg g^?1, of P 602–676 μg g^?1, of S 1,519–1,718 μg g^?1, of Cl 2,743–2,867 μg g^?1, of K 1,508–1,630 μg g^?1, of Ca 214–228 μg g^?1, of Fe 170–184 μg g^?1, of Cu 4–6 μg g^?1 and of Zn 1–3 μg g^?1. The reference interval values for golden hamster (Mesocricetus auratus) of Na were found to be 1,714–1,819 μg g^?1, Mg 51–79 μg g^?1, P 970–1,080 μg g^?1, S 1,231–1,739 μg g^?1, Cl 2,775–2,865 μg g^?1, of K 1,968–2,248 μg g^?1, of Ca 209–257 μg g^?1, of Fe 145–267 μg g^?1, of Cu 4–6 μg g^?1 and of Zn 3–5 μg g^?1. A comparative study between EDXRF and instrumental neutron activation analysis data was carried out and the results for both techniques are statistically equal (α = 0.05). The results contribute for the establishment of reference interval values for Na, Mg, P, S, Cl, K, Ca, Cu and Zn in the healthy Brazilian population and the referred laboratory animal species.     

A New Spectrophotometric Method for the Determination of Arsenic in Environmental and Biological Samples

Abstract

A simple and selective spectrophotometric method has been developed for the determination of trace amounts of arsenic using azure B as a chromogenic reagent. The proposed method is based on the reaction of arsenic(III) with potassium iodate in acid medium to liberate iodine. The liberated iodine bleaches the violet color of azure B and is measured at 644 nm. This decrease in absorbance is directly proportional to the As(III) concentration, and Beer's law is obeyed in the range 0.2–10 µg ml^?1 of As(III). The molar absorptivity, Sandell's sensitivity, detection limit, and quantitation limit of the method were found to be 1.12×10⁴ l mol^?1cm^?1, 6.71×10^?3 µg cm^?2, 0.02 µg ml^?1 and 0.08 µg ml^?1, respectively. The optimum reaction conditions and other analytical parameters were evaluated. The proposed method has been successfully applied for the determination of arsenic in various environmental and biological samples.     

Analysis of PAHs in Water and Fruit Juice Samples by DLLME Combined with LC-Fluorescence Detection

A simple, rapid and efficient method termed dispersive liquid–liquid microextraction combined with liquid chromatography-fluorescence detection, has been developed for the extraction and determination of polycyclic aromatic hydrocarbons (PAHs) in water and fruit juice samples. Parameters such as the kind and volume of extraction solvent and dispersive solvent, extraction time and salt effect were optimized. Under optimum conditions, the enrichment factors ranged from 296 to 462. The linear range was 0.01–100 μg L^?1 and limits of detection were 0.001–0.01 μg L^?1. The relative standard deviations (RSDs, for 5 μg L^?1 of PAHs) varied from 1.0 to 11.5% (n = 3). The relative recoveries of PAHs from tap, river, well and sea water samples at spiking level of 5 μg L^?1 were 82.6–117.1, 74.9–113.9, 77.0–122.4 and 86.1–119.3%, respectively. The relative recoveries of PAHs from grape and apple juice samples at spiking levels of 2.5 and 5 μg L^?1 were 80.8–114.7 and 88.9–123.0%, respectively. It is concluded that the proposed method can be successfully applied for determination of PAHs in water and fruit juice samples.     

Quantitative Determination of Hyponitrite and Hyponitrate by Ion Chromatography

A simple, sensitive and reliable method for the rapid determination of hyponitrite and hyponitrate (Angeli’s salt) in alkaline media, is presented where both species are relatively stable. The method is based on the separation of the two anions by an anion exchange column and thereafter UV spectrophotometric detection at 248 nm. The calibration curves were linear over the concentration range of 0.4–100 mg L^?1, whereas the detection limit was found to be 50 μg L^?1 for hyponitrite and 100 μg L^?1 for hyponitrate. Under these conditions, the determination of nitrate and nitrite is also possible.     

Determination of N-methylcarbamate pesticides using flow injection with photoinduced chemiluminescence detection

A sensitive, economic, rapid and simple method for the determination of four N-methylcarbamate pesticides: methomyl (2.0–80 μg L^?1), aldicarb (5.0–50 μg L^?1), butocarboxim (2.0–60 μg L^?1) and oxamyl (2.0–60 μg L^?1); is reported. It relies on the coupling of photoinduced chemiluminescence (PICL) detection with flow injection (FI) methodology. The automation of FI together with the use of light as a reagent decreased the environmental impact of the analysis. The proposed method was based on the oxidation of these pesticides, previously irradiated on-line with UV light, with cerium(IV), using quinine as a sensitiser. Limits of detection below the legal limits (100 ng L^?1) established by the European Union for drinking waters were obtained without the need of preconcentration steps. A good inter-day reproducibility (1.6–6.4%, n = 5), repeatability (rsd = 2.7 %, n = 25) and high throughput (123 h^?1) were achieved. The method was successfully applied to the determination of methomyl in natural waters with mean recoveries ranging from 90% to 98%.     

Synergistic solvent extraction of copper, cobalt, rhodium and iridium into 1, 2-Dichloroethane at trace level by newly synthesized 25, 26, 27, 28-tetrahydroxy-5, 11, 17, 23-tetra-[4-(N-hydroxyl-3-phenylprop-2-enimidamido) phenylazo] calix[4]arene

A spectrophotometric method for determination of copper, cobalt, rhodium and iridium ions from nitric acid media after extraction of these ions by 25, 26, 27, 28-tetrahydroxy-5, 11, 17, 23-tetra-[4-(N-hydroxyl-3-phenylprop-2-enimidamido) phenylazo] calix [4] arene (THPAC) has been developed and possible synergistic effect has been investigated. The maximum enhancement was obtained in the presence of 30% 1, 2-dichloroethane in DMF and 3M nitric acid. The trace amounts of the metal were determined spectrophotometrically. Beer’s law was obeyed in concentration range 5.0–10.0 μg, 6.0–120.0 μg, 12.0–100.0 μg, and 10.0–130.0 μg/10 mL of the final solution of copper, cobalt, rhodium and iridium, respectively. The molar absorptivities (l mol^?1 cm^?1) and Sandell’s sensitivities (μg cm^?1) were calculated: Cu (II) = 0.96 × 10^4, 0.0066; Co (II) = 1.13 × 10⁴, 0.0052; Rh (III) = 0.98 × 10⁴, 0.012; and Ir (III) = 2.03 × 10⁴, 0.0095, respectively. Seven replicate analyses containing of 20.0 μg of Cu (II), 24.0 μg of Co (II), 36.0 μg of Rh (III) and 25.0 μg of Ir (III) gave mean absorbance 0.302, 0.462, 0.344, 0.264; and relative standard deviation 0.65, 0.85, 1.10, 1.08%, respectively. The interference of various ions was studied and optimum conditions were developed for determination of metals in certain alloys, environmental, pharmaceutical and synthetic samples.     

Spectrophotometric Determination of Some Fluoroquinolone Derivatives in Dosage Forms and Biological Fluids Using Ion‐Pair Complex Formation

Abstract

A simple, rapid, sensitive, and reproducible procedure for assaying norfloxacin (NOR), ciprofloxacin (CIP), and ofloxacin (OFL) was investigated. The procedure is based on the reaction of selected drugs with Sudan II (I), Congo red (II), and Gentian violet (III) in universal buffer to give soluble ion‐pair complexes. The effects of various parameters have been studied. Beer's law plots were obeyed in the concentration ranges 0.5–11 µg ml^?1, whereas Ringbom optimum ranges were 0.7–9.5 µg ml^?1. The apparent molar absorptivity (6.4×10⁴ L mol^?1 cm^?1), Sandell sensitivity (4.99 ng cm^?2), detection (0.13 µg ml^?1), and quantification (0.44 µg ml^?1) limits were calculated. The relative standard deviation for ten determinations, for samples containing 4.0 µg ml^?1, was found to be 1.40%. The influence of commonly employed excipients in the determination of the studied drugs was examined. There was no interference from degradate product results from thermal and hydrolytic treatments. The results obtained by the proposed procedure were statistically validated. The developed procedure was successfully applied to the determination of the studied drugs in dosage forms and biological fluids.     

Generic Automated Fluorimetric Assay for the Quality Control of Gamma Aminobutyric Acid-Analogue Anti-Epileptic Drugs Using Sequential Injection

The first sequential injection assay for the generic determination of gabapentin and pregabalin is reported. The analytes react with o-phthalaldehyde in the presence of N-acetylcysteine as a nucleophilic reagent in alkaline medium under flow conditions to form highly fluorescent derivatives. The effect of the main instrumental and chemical variables on the assay was examined. The proposed method was validated for both analytes in terms of linearity, detection, and quantitation limits (c _L  = 160 μg L^?1, c _Q  = 480 μg L^?1 for gabapentin, and c _L  = 70 μg L^?1, c _Q  = 210 μg L^?1 for pregabalin), precision (s _r  < 1.0% in both cases), selectivity, and accuracy. The applicability of the assay was demonstrated by successfully analyzing commercially available formulations. The experimental percent recoveries were in the range of 97.9–102.0% for gabapentin and 98.3–102.3% for pregabalin.     

Synergistic extraction and spectrophotometric determination of palladium(II), iron(III), and tellurium(IV) at trace level by newly synthesized p-[4-(3,5-dimethylisoxazolyl)azophenylazo]calix(4)arene

A spectrophotometric method for the determination of palladium, iron and tellurium from nitric acid media after extraction of their p-[4-(3,5-dimethylisoxazolyl)azophenylazo]calix(4)arene [DMIAPAC] complexes has been developed and possible synergistic effects have been investigated. Chloroform, carbon tetrachloride, cyclohexane, 1,2-dichloroethane, toluene and xylene were used as the diluents. The maximum enhancement was obtained in the presence of 30% 1,2-dichloroethane. The trace amounts of metals were determined spectrophotometrically. Beer’s law obeyed in the concentration range of 5.0–95.0 μg, 8.0–120.0 μg and 10.0–140.0 μg/10 mL of the final solution of palladium, iron and tellurium, respectively. The molar absorptivities (l mol^?1cm^?1) and Sandell’s sensitivities (μg cm ^?1) were calculated: Pd(II) = 1.73 × 10⁴ and 0.0061; Fe(III) = 1.08 × 10⁴ and 0.0052; Te(IV) = 1.67 × 10⁴ and 0.0077. Ten replicate analyses containing 20 μg of Pd(II), 12.5 μg of Fe(III) and 32 μg of Te(IV) gave mean absorbance of 0.326, 0.242 and 0.418 with relative standard deviation of 0.36, 0.65 and 0.82% for Pd(II), Fe(III) and Te(IV), respectively. The interference of various ions was studied and optimum conditions were developed for the determination of these metals in certain alloys and synthetic mixtures.     

Development of ultrasound-assisted emulsification solidified floating organic drop microextraction for determination of trace amounts of iron and copper in water, food and rock samples

A simple and efficient liquid-phase microextraction technique was developed using ultrasound-assisted emulsification solidified floating organic drop microextraction combined with flame atomic absorption spectrometry, for the extraction and determination of trace amounts of iron and copper in real samples. 2-Mercaptopyridine n-oxide was used as chelating agent and 1-dodecanol was selected as extraction solvent. The factors influencing the complex formation and extraction were optimized. Under optimum conditions, an enrichment factor of ~13 was obtained for both iron and copper from only 6.7 mL of aqueous phase. The analytical curves were linear between 40–800 and 20–1,200 μg L^?1 for iron and copper respectively. Based on three SD of the blank, the detection limits were 8.6 and 4.1 μg L^?1 for iron and copper respectively. The relative SDs for ten replicate measurements of 500 μg L^?1 of metal ions were 2.9 and 1.2 for iron and copper respectively. The proposed method was successfully applied for determination of iron and copper in environmental waters and some food samples including chess, rice, honey and powdered milk. Finally, method validation was made using rock certified reference material. A student’s t test indicated that there was no significant difference between experimental results and certified values.     

Nonextractive Trace Level Simultaneous Determination of Mercury(II) and Zinc(II) in Environmental Samples with 2‐(5‐Bromo‐2‐pyridylazo)‐5‐diethylaminophenol and Cetylpyridinium Chloride

Abstract

A simple, rapid, selective, and sensitive method for the derivative spectrophotometric determination of Hg(II) and its simultaneous determination in the presence of Zn(II) using 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant, has been developed. The molar absorption coefficient and analytical sensitivity of the 1∶1 Hg(II) complex at 558 nm (λ_max) are 5.78×10⁴ L mol^?1 cm^?1 and 0.67 ng mL^?1, respectively. The detection limit of Hg(II) is 1.40×10^?2 ng mL^?1, and Beer's law is valid in the concentration range 0.05–2.40 µg mL^?1. Overlapping spectral profiles of Hg(II) and Zn(II) complexes in zero‐order mode interfere in their simultaneous determination. However, 0.10–2.00 µg mL^?1 of Hg(II) and 0.065–0.650 µg mL^?1 of Zn(II), when present together, can be simultaneously determined at zero cross point of the derivative spectrum, without any prior separation. The relative standard deviation for six replicate measurements of solutions containing 0.134 µg mL^?1 of Hg(II) and 0.620 µg mL^?1 of Zn(II) is 1.72 and 1.47%, respectively. The proposed method has successfully been evaluated for trace level simultaneous determination of Hg(II) and Zn(II) in environmental samples.     

Spectrophotometric determination of microamounts of thorium with thorin in the presence of cetylpyridinium chloride as surfactant in perchloric acid

A simple and more sensitive spectrophotometric method is developed for determination of thorium using thorin as a chromogenic reagent in the presence of cetylpyridinium chloride (CPC) in perchloric acid. The reaction was instantaneous and complex was found stable for 168 h. A significant bathochromic shift was noted in the presence of CPC. The determination range was enhanced from 25 to 30 μg mL^?1 with molar absorptivity of 2.95 × 104 L mol^?1 cm^?1 at 25 ± 5 °C. Sandell’s sensitivity was calculated to be 6.8 ng cm^?2 at 581 nm. Relative standard deviation was reduced from 4.25 to 2.5. The interference of Ni²⁺, Mn²⁺, Sn⁴⁺, phosphate, EDTA, sulphate and tartrate has been reduced significantly in the presence of surfactant. The validity of the proposed method was tested by determining thorium in Certified Reference Materials.     

Novel Method for Selective Spectrophotometric Determination of Titanium(IV) with Water Extract of Slippery Elm Leaf as a New Reagent

Abstract

A novel spectrophotometric method for the determination of titanium(IV) by using a new reagent, water extract of slippery elm leaf is developed. In 0.05 M hydrochloric acid, titanium(IV) reacts with this reagent to form a yellow product. The formed product shows maximum absorbance at 415 nm with a molar absorptivity value of 0.68×10⁴ l mol^–1 cm^–1 and the method was linear in the 0.2–6 µg ml^?1 concentration range. The detection limit value was found to be 0.0131 µg ml^?1. The proposed method was simple, low cost, selective, and sensitive. It was applied to the analytic samples with satisfactory results.     

Differential pulse voltammetric determination of trace rotenone using molecularly imprinted polymer microspheres

A new voltammetric method for the determination of rotenone is described. It is based on the reduction of an electroactive derivative of rotenone on the surface of an electrode. Rotenone in water was pre-concentrated using a new type of molecularly imprinted polymer microspheres and can react with hydrazine chloride to produce the electroactive derivative. The experimental conditions were discussed. Under optimum conditions, it was found that the peak potential (Ep) of the derivative of rotenone is ?1.02 V (vs. Ag/AgCl). Using the proposed procedure rotenone can be determined in the range 0.2–400 μg L^?1. The detection limit for rotenone is 0.1 μg L^?1 and the relative standard deviation for 100 μg L^?1 rotenone is 1.99 %. The method was applied to the determination of rotenone in water samples with satisfactory results.     

Optimization of parameters for the alcoholic-assisted dispersive liquid–liquid microextraction of estrogens in water

Extraction and determination of estrogens in water samples were performed using alcoholic-assisted dispersive liquid–liquid microextraction (AA-DLLME) and high-performance liquid chromatography (UV/Vis detection). A Plackett–Burman design and a central composite design were applied to evaluate the AA-DLLME procedure. The effect of six parameters on extraction efficiency was investigated. The factors studied were volume of extraction and dispersive solvents, extraction time, pH, amount of salt and agitation rate. According to Plackett–Burman design results, the effective parameters were volume of extraction solvent and pH. Next, a central composite design was applied to obtain optimal condition. The optimized conditions were obtained at 220 μL 1-octanol as extraction solvent, 700 μL ethanol as dispersive solvent, pH 6 and 200 μL sample volume. Linearity was observed in the range of 1–500 μg L^?1 for E2 and 0.1–100 μg L^?1 for E1. Limits of detection were 0.1 μg L^?1 for E2 and 0.01 μg L^?1 for E1. The enrichment factors and extraction recoveries were 42.2, 46.4 and 80.4, 86.7, respectively. The relative standard deviations for determination of estrogens in water were in the range of 3.9–7.2 % (n = 3). The developed method was successfully applied for the determination of estrogens in environmental water samples.     

HPLC and UPLC Methods for the Simultaneous Determination of Enalapril and Hydrochlorothiazide in Pharmaceutical Dosage Forms

High efficiency and less elution are the basic requirements of high-speed chromatographic separation. In this study, a new gradient reverse phase chromatographic methods were developed using HPLC and UPLC systems for simultaneous determination of enalapril maleate (ENL) and hydrochlorothiazide (HCZ) in pharmaceutical dosage forms. The chromatographic separations of ENL and HCZ were achieved on a Waters μ-Bondapak C 18, (300 × 3.9 mm, 10 μm) and Waters Acquity BEH C18 (100 × 2.1 mm, 1.7 μm) columns for HPLC within 5.30 min and UPLC within a short retention time of 1.95 min, respectively. A linear response was observed over the concentration range 0.270–399 μg mL^?1 of ENL, 0.260–399 μg mL^?1 of HCZ for HPLC system and 0.270–399 μg mL^?1 of ENL and 0.065–249 μg mL^?1 of HCZ for UPLC system. Also, limit of detection for ENL was 1.848 ng mL^?1 and 31.477 ng mL^?1 for HCZ, 2.804 ng mL^?1 for ENL and 2.943 ng mL^?1 for HCZ using HPLC and UPLC, respectively. The proposed methods were validated according to ICH guideline with respect to precision, accuracy, and linearity. Forced degradation studies were also performed for both compounds in bulk drug samples to demonstrate the specificity and stability indicating power of the HPLC method. Comparison of system performance with conventional HPLC was made with respect to analysis time, efficiency, and resolution.