导电聚合物的电化学制备和电化学性质研究--中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(Ⅰ)

简要介绍本研究组自上世纪80年代以来在导电聚合物的电化学制备和电化学性质研究中取得的一些主要成果,包括吡咯电化学聚合条件的影响、电化学聚合反应机理及其反应动力学、导电聚吡咯的两种掺杂结构及其两步电化学氧化还原过程和电化学过氧化的机理、导电聚苯胺的电化学性质、导电聚合物稳定性的电化学解释等等．     

导电聚合物的电化学制备和电化学性质研究——中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(I)

简要介绍本研究组自上世纪80年代以来在导电聚合物的电化学制备和电化学性质研究中取得的一些主要成果,包括吡咯电化学聚合条件的影响、电化学聚合反应机理及其反应动力学、导电聚吡咯的两种掺杂结构及其两步电化学氧化还原过程和电化学过氧化的机理、导电聚苯胺的电化学性质、导电聚合物稳定性的电化学解释等等.     

从导电聚吡咯到共轭聚合物光伏材料——我在中科院化学所30年共轭高分子研究历程

本文简要回顾了本人在中科院化学所30年的研究历程,重点介绍了在共轭高分子(包括导电聚吡咯电化学、聚合物发光电化学池(LEC)和共轭聚合物给体光伏材料)方面的研究成果。在导电聚吡咯电化学方面,对导电聚吡咯的电化学制备和电化学性质进行了深入研究,阐明了各种电化学聚合条件对制备的导电聚吡咯电导和力学强度等的影响,发现电解液溶剂给电子性(Donor number)对吡咯电化学聚合制备的导电聚吡咯电导的影响:溶剂Donor number越小制备的导电聚吡咯电导越高;使用非离子表面活性剂添加剂在水溶液中制备出表面非常光滑和高力学强度的导电聚吡咯薄膜;对于吡咯电化学聚合提出了电解液阴离子参与的阳离子自由基聚合机理,并推到出吡咯电化学聚合反应的动力学方程;发现在NaNO3水溶液中电化学聚合制备的导电聚吡咯除存在主链氧化、对阴离子掺杂结构外,还存在质子酸掺杂结构;阐明了导电聚吡咯在水溶液中电化学还原和再氧化的机理及其电化学过程的可逆性和稳定性,以及导电聚吡咯在有机电解液中特殊的第一次还原和再氧化的机理。在LEC方面,通过交流阻抗法确认了LEC的电化学掺杂机理和p-i-n结构,合成了多种适用于LEC的主链带离子导电单元的兼具离子导电性的发光嵌段共聚物,避免了LEC活性层中存在的发光聚合物和离子导电聚合物的分相问题;使用离子液体作为电解质制备了室温准冷冻p-i-n结LEC,改善了LEC的电致发光性能。在共轭聚合物给体光伏材料方面,我们提出了通过共轭侧链来拓宽聚合物吸收和提高空穴迁移率的分子设计思想,设计和合成了一系列带共轭侧链的二维共轭聚噻吩衍生物以及基于二噻吩取代苯并二噻吩的窄带隙高效二维共轭聚合物给体光伏材料。我们使用烷硫基取代进一步降低了这类二维共轭聚合物的HOMO能级从而进一步提高了其光伏性能。最后介绍了本组二维共轭聚合物给体光伏材料在非富勒烯聚合物太阳能电池方面的最新研究进展。     

电聚合导电聚吡咯的合成研究

用电化学法将吡咯单体聚合在电极上，于不同支持电解质的水溶液中得到聚吡啶薄膜。研究了电解质浓度、电解质阴离子种类及聚合时间对聚吡咯薄膜导电性能的影响。     

聚吡咯(PPY)/聚己内酰胺(Nylon 6)——导电复合材料的研究

本文用电化学氧化聚合的方法制备出了既具有优良的导电性能又具有良好机械性能的聚吡咯(PPY)/聚己内酰胺(Nylon 6)的复合材料,该复合材料的导电率可达119s/cm,并对聚吡咯/聚己内酰胺导电复合材料进行了扫描电子显微镜、电导率及机械性能的测试及表征。     

无标记DNA在氨基改性导电聚吡咯表面的固定/杂交

通过吡咯(Py)与其衍生物——6-吡咯己胺(PyHA)的共聚物聚(吡咯-co-6-吡咯己胺)[poly(Py-co-PyHA)]的合成研究,并采用电化学循环伏安法来考察体系的电化学活性.在缓冲溶液中,由于探针DNA链上的负电荷与共聚物分子链上的正电荷之间存在强烈的静电吸引力,使得DNA能够固定在导电聚合物膜上.实验结果证明,目标DNA和聚吡咯薄膜之间不存在非特异性吸附,而能和探针DNA进行顺利杂交.此结果为以后研究更为敏感的DNA固定及导电聚合物敏感膜提供了实验基础.     

聚噻吩的合成方法

自从1977年白川英树等发现聚乙炔这种导电聚合物以来,打破了高分子材料长期以来被认为是绝缘体的观点。随后聚苯胺、聚吡咯、聚噻吩等的出现使导电聚合物的种类不断出新,其用途也扩展到如导电材料、电极材料、催化材料以及太阳能电池等应用中,且已有部分产品实现了商品化。其中,聚噻吩因其良好的稳定性、易于制备、掺杂后具有良好的光电化学性能等特点而受到广泛关注。本文总结了几种合成聚噻吩及其衍生物的常见方法,包括化学氧化聚合法、电化学聚合法、金属催化偶联法、光致合成法、光电化学沉积法,以及近年来新发现的固相聚合法和酸催化聚合法,并简要介绍了各自的合成机理及优缺点。     

导电聚合物LB膜

本文回顾了ＬＢ膜技术在导电聚合物体系中的利用，内容涉及共轭型导电聚合物（包括聚吡咯、聚噻吩、聚对亚苯基亚乙烯基、聚苯胺及其衍生物）ＬＢ膜的制备、结构表征、电导率与分子结构和分子堆砌之间的关系以及其他导电聚合物ＬＢ膜的研究现状。     

导电高分子材料电化学合成过程中的计量化学关系

导电高分子材料可以通过电化学方法合成,在合成过程中,电解液中的阴离子以一定比例作为反离子结合在聚合物 中,然后沉积在电极表面.本文以聚吡咯为例,对此过程进行了计量化学探主坟,导出了生成的聚合重量与反应中消耗的电量及反离子大小和比例间的关系.十二磺酸聚吡咯、扁桃酸聚吡咯、讥氯酸聚吡咯与氯化聚吡咯的电化学合成证实了以上关系.实验与计算表明,氯化聚吡咯中由于反离的分子量接近单体分子量的1/2,故生成的聚合物重量与反离子在聚合筘的比例无关.     

离子液体应用于电合成导电聚合物*

自20世纪70年代导电聚合物发现以来,聚吡咯、聚苯胺、聚噻吩、聚（3,4-乙撑二氧噻吩）、聚对苯及其衍生物等,以其特殊的电子、电化学、光学性质以及巨大应用潜力受到广泛关注。离子液体是一类在室温或接近室温时呈液态的离子化合物,作为一类环境友好的新型绿色溶剂,具有很多独特的物理化学性质。本文综述了离子液体作为反应介质、支持电解质、测试介质以及离子液体参与形成的聚集体,在导电聚合物的电化学合成以及电化学性质测试中的研究进展,并展望了发展趋势。     

Polypyrrole Grafts Synthesized via Electrochemical Polymerization

Abstract

Electrically conducting polypyrrole grafts with poly[(methyl meth-acrylate)-co-(2-(N-pyrrolyl) ethyl methacrylate)] (PMMA-co-PEMA) were synthesized by constant potential electrolysis. Cyclic Voltammetry, DSC, TGA, SEM and elemental analysis were used in order to characterize the free standing films. Conductivities of the polymers were measured by a four-probe technique.     

A comparative study of a polyindole-based microelectrochemical transistor in aqueous and non-aqueous electrolytes

The behaviour of a polyindole-based microelectrochemical transistor in aqueous and non-aqueous electrolytes is described. The polyindole film was grown onto two closely spaced (100 μm) platinum microelectrodes by anodic oxidation of indole (10 mM) from 0.1 M tetrabutylammonium perchlorate in dichloromethane at 1.1 V vs. Ag/AgCl. The polymerization was carried out for a sufficiently long time in order to connect both Pt microelectrodes, which operated as a transistor when immersed in an electrolytic solution. In this transistor, one microelectrode was a “source” and the other a “drain”; the Ag/AgCl wire reference electrode was used as a “gate”. The drain current (current between source and drain) was modulated by varying the gate potential (potential between source and gate) at a fixed drain potential (potential between source and drain). The transconductances of the transistor were estimated as 0.98 mS/cm and 20.6 mS/cm of channel width (separation between two microelectrodes) in aqueous and non-aqueous solutions, respectively. Received: 6 April 1999 / Accepted: 24 August 1999     

Synthesis and characterization of a bifunctional amido-thiophene monomer and its copolymer with thiophene and electrochemical properties

A bifunctional amido-thiophene namely hexamethylene (bis-3-thiophene acetamide) (HMTA) was synthesized by the reaction of 3-thiophene acetic acid with hexamethylene diamine. Copolymerization in the presence of thiophene was achieved electrochemically in tetrabutylammonium tetrafluoroborate/acetonitrile (TBAFB/AN). Spectroelectrochemical analysis of the resulting copolymer [P(HMTA-co-Th)] reflected electronic transitions at 505 nm, 740 nm and ∼1000 nm, revealing π to π* transition, polaron and bipolaron band formation respectively. Switching ability was evaluated by a kinetic study via measuring the transmittance (%T) at the maximum contrast. Dual type polymer electrochromic devices (ECDs) based on P(HMTA-co-Th) and poly(ethylene dioxythiophene) (PEDOT) have been constructed. Spectroelectrochemistry, switching ability and stability of the devices were investigated by UV-vis spectroscopy and cyclic voltammetry. These devices exhibit low switching voltages (between 0.0 V and +1.6 V), short switching times with reasonable switching stability under atmospheric conditions.     

Conducting graft copolymers of pyrrole and thiophene with random copolymers of methyl methacrylate and 3-methylthienyl methacrylate

Random copolymers of 3-methyl thienylmethacrylate and methyl methacrylate were synthesized via free radical polymerization. Electro-copolymerizations of random copolymers with thiophene and/or pyrrole were carried out in acetonitrile-tetrabutylammonium tetrafluoroborate (TBAFB), water-p-toluene sulfonic acid (PTSA) solvent-electrolyte couples. Oxidative polymerization of thiophene functionalized random copolymer was also achieved by constant current electrolysis and chemical polymerization. The characterizations were done by conductivity measurements, cyclic voltammetry (CV), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermal gravimetry analysis (TGA), scanning electron microscopy (SEM).     

Electrochemical polymerization of 1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole as a novel immobilization platform for microbial sensing

Two types of bacterial biosensor were constructed by immobilization of Gluconobacter oxydans and Pseudomonas fluorescens cells on graphite electrodes modified with the conducting polymer; poly(1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole) [SNS(NO₂)]. The measurement was based on the respiratory activity of cells estimated by the oxygen consumption at − 0.7 V due to the metabolic activity in the presence of substrate. As well as analytical characterization, the linear detection ranges, effects of electropolymerization time, pH and cell amount were examined by using glucose as the substrate. The linear relationships were observed in the range of 0.25–4.0 mM and 0.2–1.0 mM for G. oxydans and P. fluorescens based sensors, respectively.     

Synthesis, characterization and electrochromic properties of conducting copolymers of 2,3-bis-[(3-thienylcarbonyl)oxy]propyl 3-thiophene carboxylate with thiophene and pyrrole

2,3-bis-[(3-thienylcarbonyl)oxy]propyl 3-thiophene carboxylate (TOPT) was synthesized via the reaction of 3-thionylcarboxylic acid with glycerol, and electrochemically polymerized either with thiophene and pyrrole by using tetrabutylammonium tetrafluoroborate (TBAFB) as the supporting electrolyte in acetonitrile (AN). Characterization of the resulting copolymers was performed via cyclic voltammetry, FTIR, thermal gravimetry analysis (TGA), and scanning electron microscopy (SEM). Electrical conductivities were measured by the four-probe technique. Spectroelectrochemical analysis shows that the copolymer of the monomer with thiophene has an electronic band gap (due to the π-π^∗ transition) of 2.00 eV, with a dark red color in the fully reduced form and a green color in the fully oxidized form. The copolymer exhibited a long-term switching stability up to 1800 double switches.     

Synthesis and characterization of a new soluble conducting polymer and its electrochromic device

A mixture of isomers 2,5-di(4-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole, 2-(4-methyl-thiophen-2-yl)-5-(3-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole and 2,5-di(3-methyl-thiophen-2-yl)-1-(4-nitrophenyl)-1H-pyrrole (Me-SNS(NO₂)) were synthesized. Resulting monomers were polymerized chemically, producing soluble polymers in common organic solvents. The average molecular weight has been determined by gel permeation chromatography (GPC) as Mn=5.6×10³ for the chemically synthesized polymer. The monomers were also electrochemically polymerized in the presence of LiClO₄, NaClO₄ (1:1) as the supporting electrolyte in acetonitrile solvent. Resulting polymers were characterized via CV, FTIR, NMR, SEM and UV–Vis spectroscopy. Spectroelectrochemistry analysis of polymer revealed Π–Π^* transition below 300 nm, with an electronic band gap of 2.18 ev. Switching ability of the polymer was evaluated by kinetic study measuring percent transmittance (%T) at the maximum contrast point, indicating that poly(Me-SNS(NO₂)) is a suitable material for electrochromic devices.     

以多层次聚苯胺颗粒为电极活性物质的超级电容器的电化学性能

以(NH₄)₂S₂O₈为氧化剂用化学氧化法合成了具有多层次结构的聚苯胺颗粒，其二次颗粒由一次颗粒集结而成，一次颗粒的粒径基本上在1 μm以下，一次颗粒由多层微小薄片叠合而成. 用这种聚苯胺为活性物质制成电极，以2 mol•L^-1的H₂SO₄水溶液作电解液，组装成了聚苯胺电极超级电容器. 用循环伏安法、电化学阻抗谱和恒电流充放电技术测试了该超级电容器的电化学性能.在7 mA的充放电电流下，它的比能量可达6.35 Wh•kg^-1，比功率可达132 W•kg^-1，电极材料的比容量可达408 F•g^-1. 在20 mA的充放电电流下，它的比能量可达4.39 Wh•kg^-1，比功率可达328 W•kg^-1，电极材料的比容量可达324 F•g^-1. 在100次的充放电循环中，聚苯胺电极超级电容器的电容量没有下降，电荷充放电效率一直保持在95%左右.     

Electrochemical synthesis and characterization of poly(pyrrole-co-tetrahydrofuran) conducting copolymer

The direct electrochemical copolymerization of pyrrole and tetrahydrofuran in various monomer ratios was carried out by potentiostatic methods in nitromethane solution. The copolymer has been characterized using FT-IR, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermal gravimetrical analysis (TGA), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and elemental analysis. The results showed that the electrochemical oxidation of pyrrole and tetrahydrofuran comonomers generated true copolymers rather than blends of the two homopolymers. The copolymer showed a better flexibility than pure polypyrrole. The electrical conductivity of the copolymers increases with the amount of polypyrrole in the copolymer between the value of 1.69 S/cm and 0.71 S/cm.