Ammonium Chloride Promoted Palladium-Catalyzed Ullmann Coupling of Aryl Bromide

The Ullmann coupling reaction is one of the most useful methods for the synthesis of symmetrical biaryls. It is usually carried out with copper as a reagent.1 However, it generally requires more than a stoichiomet-ric amount of copper and high reaction temperature. In recent years, various reagents, especially combination of the transition metal with reducing reagents,2-6 were proposed to overcome these problems. For example, Li and co-workers2a,2b have reported the Pd/C and zinc-mediated Ul…     

PdCl<Subscript>2</Subscript>/DABCO-catalyzed direct arylation of 2-hydroxybenzaldehydes in H<Subscript>2</Subscript>O

In this paper the successful application of DABCO both as base and as ligand for efficient coupling reactions of aryl iodides and bromides with 2-hydroxybenzaldehydes in the presence of catalytic amounts of PdCl₂ in water as solvent was introduced.     

Gold(I)-catalyzed direct C-H arylation of pyrazine and pyridine with aryl bromides

An efficient procedure for the direct C-H arylation of electron-poor aromatics such as pyrazine and pyridine with aryl bomides is described. In the presence of catalytic amount of Cy₃PAuCl and with the use of t-BuOK as base, pyrazine undergoes the direct C-H arylation with aryl bromides at 100 °C, and the yields of the arylated products depend on the nature of aryl bromides. In the cases of electron-rich aryl bromides used, the arylated pyrazines can be obtained in good to high yields. For electron-poor aryl bromides, the addition of AgBF₄ is the crucial point to accelerate the coupling reaction to give the arylated products in moderate yields. Pyridine also reacts with electron-rich aryl bromides catalyzed by Cy₃PAuCl to give a mixture of arylated regioisomers in moderate yield. However, in order to realize the direct C-H arylation of pyridine with electron-poor aryl bromides, the addition of silver salt as additive and a milder reaction temperature (60 °C) are required.     

Suzuki Coupling of Cyclopropylboronic Acid With Aryl Halides Catalyzed by a Palladium–Tetraphosphine Complex

The tetraphosphine all‐cis‐1,2,3,4‐tetrakis(diphenylphosphinomethyl)cyclopentane (Tedicyp) in combination with [Pd(C₃H₅)Cl]₂ affords a very efficient catalyst for the coupling of cyclopropylboronic acid with aryl bromides and aryl chlorides. Higher reactions rates were observed with aryl bromides than with aryl chlorides; however, even in the presence of 1–0.4% of catalyst, a few aryl chlorides gave the coupling products in good yields. A wide variety of substituents such as alkyl, methoxy, trifluoromethyl, acetyl, benzoyl, formyl, carboxylate, nitro, and nitrile on the aryl halides are tolerated. The coupling reaction of sterically very congested aryl bromides such as bromomesitylene or 2,4,6‐triisopropylbromobenzene also proceeds in good yields.     

trans-Pd(OAc)2(Cy2NH)2 catalyzed Suzuki coupling reactions and its temperature-dependent activities toward aryl bromides

A new catalytic system based on Pd-simple amines for Suzuki coupling reactions of aryl bromides is described. A well-defined air-stable complex, trans-Pd(OAc)₂(Cy₂NH)₂ effectively promotes Suzuki couplings of aryl bromides with a range of aryl boronic acids to give diaryl products in high yields. It also exhibits temperature-dependent activity toward aryl bromides bearing different electronic substituents under reaction conditions.     

An Efficient Palladium and Bis(2‐pyridylmethyl)amine‐based System for Suzuki‐Miyaura Cross‐Coupling under Aqueous and Aerobic Condition

A novel PdCl₂/bis(2‐pyridylmethyl)amine‐based ligand ( 1 ) catalytic system, which is water‐soluble and air‐stable, has been successfully synthesized and applied for Suzuki‐Miyaura cross‐coupling reaction. In the presence of catalytic amount of PdCl₂/ 1 system, arylboronic acids can couple with a wide range of aryl halides, including aryl bromides and aryl chlorides. The reactions proceed under mild conditions to give excellent yields, and a wide range of functionalities is tolerated.     

Pd(0)‐Catalyzed Tandem One‐Pot Reaction of Biphenyl Ketones/Aldehydes to the Corresponding Di‐substituted Aryl Olefins

Synthesis of di‐substituted aryl olefins via a Pd(0)‐catalyzed cross‐coupling reaction of biphenyl ketones/aldehydes, tosylhydrazide, and aryl bromides (or benzyl halides) was developed. This methodology was achieved by one‐pot two‐step reactions involving the preparation of N ‐tosylhydrazones by reacting tosylhydrazide with biphenyl ketones/aldehydes, followed by coupling with aryl bromides (or benzyl halides) in the presence of Pd(PPh₃ )₄ and lithium t ‐butoxide to produce various di‐substituted aryl olefins in moderate to good yields.     

Nickel-promoted ligand-free palladium-catalyzed Suzuki coupling reaction

Summary A Ni-promoted ligand free palladium catalyst system for Suzuki coupling of aryl bromides has been developed in high efficiency under mild reaction conditions. It was obtained in situ by introducing NiCl₂ to PdCl₂/PVP using a parallel high-throughput screening technique. A wide range of aryl bromides bearing a variety of functional groups was evaluated.     

Copper-free PdCl2/PPh3-catalyzed Sonogashira coupling reaction of aryl bromides with terminal alkynes in water

A simple, copper-free and efficient catalytic system for the Sonogashira coupling reaction of aryl bromides with terminal alkynes in pure water has been developed. The use of PdCl₂/PPh₃ in the presence of pyrrolidine allows the coupling reaction to proceed at 120 °C in moderate to excellent yields.     

应用腙作为配体的铜催化二芳醚合成反应

一种简单易得的腙,2-吡啶醛 1-苯基腙 （1）,能够作为有效配体,极大地促进碘化铜催化的芳基溴与酚的C–O偶联反应。该偶联反应条件温和（二氧六环为溶剂、磷酸钾为碱、90–100 0C 的反应温度）,适用于各种芳基溴（电中性、贫电子和富电子）和酚（电中性和富电子）的底物,能够相容一些碱敏感官能团如酯基、醛基和羰基等。     

Highly efficient copper(0)-catalyzed Suzuki-Miyaura cross-coupling reactions in reusable PEG-400

Readily available copper powder with K₂CO₃ as the base was extremely effective catalyst for Suzuki-Miyaura coupling reaction performed in PEG-400, which afforded almost quantitative coupling products of aryl iodides. Using iodine as additive, coupling products of aryl bromides or chlorides could be obtained with moderate to good yields.     

Water‐Soluble and Recyclable Cyclopalladated Ferrocenylimine for Suzuki Coupling Reaction

A series of new water‐soluble cyclopalladated ferrocenylimines were designed and prepared. They were efficient catalyst for Suzuki coupling reactions of aryl bromides and phenylboronic acid in neat water under ambient atmosphere. Among of these catalysts, the catalyst ( C₂D ) could be reused for 6 times for the Suzuki coupling reaction of 4‐bromotoluene with phenylboronic acid in EtOH/H₂O under ambient atmosphere, in which no significant loss activity of C₂D was observed.     

An Easy Access to Oxime Ethers by Pd‐Catalyzed C—O Cross‐Coupling of Activated Aryl Bromides with Ketoximes and Chalcone Oximes

An efficient Pd‐catalyzed method for C—O cross‐coupling of ketoximes and chalcone oximes with activated aryl bromides and bromo‐chalcones has been developed. All oxime ethers were obtained in good to excellent yields by [(π‐allyl)PdCl]₂/tBuXPhos ( L7 ) catalyst system. TrixiePhos ( L11 ) was also found to be effective for the oxime coupling. This method offers an easy and smooth coupling of chalcone oximes with activated aryl bromides and bromo‐chalcones, which has not been previously explored.     

A general and efficient method for the palladium-catalyzed cross-coupling of thiols and secondary phosphines

The general and efficient cross-coupling of thiols with aryl halides was developed utilizing Pd(OAc)₂/1,1′-bis(diisopropylphosphino)ferrocene as the catalyst. The substrate scope is broad and includes a variety of aryl bromides and chlorides, which can be coupled to aliphatic and aromatic thiols. This catalyst system has the widest substrate scope of any reported to date. The present catalyst system also enables the palladium-catalyzed coupling of secondary phosphines with aryl bromides and chlorides.     

A highly active palladium(II)–bis(oxazoline) catalyst for Suzuki–Miyaura,Mizoroki–Heck and sonogashira coupling reactions in aqueous dimethylformamide

An efficient catalytic system based on a new palladium–bis(oxazoline) ( Pd-BOX-1 ) complex has been developed. The complex Pd-BOX-1 adopts a legless chair‐type structure where the distorted square planar [PdN₂Cl₂] moiety and the benzene ring spacer represent the seat and the chair back, respectively. The catalytic activity of Pd-BOX-1 has been investigated in dimethylformamide–water under aerobic and mild conditions in Suzuki–Miyaura coupling reactions of arylboronic acids with aryl iodides, aryl bromides and aryl chlorides, Mizoroki–Heck coupling reactions of aryl halides with styrene derivatives, and Sonogashira coupling reactions of aryl halides with terminal alkynes. A wide range of functional groups as substituents on the arylboronic acids and aryl halides were considered. Pd-BOX-1 demonstrates exceptional air and moisture stability. Of note, the catalyst system based on Pd-BOX-1 shows high recycling ability in Suzuki–Miyaura coupling reactions in dimethylformamide–water without any loss in catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of Alkyl-Aryl Ethers by Copper-catalyzed Etherization Reactions of Aryl Fluorides with Tetraalkylammonium Bromides and H2O

Synthesis of alkyl aryl ethers via copper‐catalyzed etherizations of electron‐deficient aryl fluorides with quaternary ammonium bromides and water has been developed. In the presence of Cu(OAc)₂, POPh₃ ( L4 ) and Cs₂CO₃, a variety of electron‐deficient aryl fluorides underwent the reaction with quaternary ammonium bromides and H₂O in moderate to good yields. The mechanism was also discussed.     

Palladium nanoparticles supported on SiO2 by chemical vapor deposition (CVD) technique as efficient catalyst for Suzuki–Miyaura coupling of aryl bromides and iodides: selective coupling of halophenols

Nanoparticles of palladium were supported on SiO₂ by chemical vapor deposition technique. The obtained Pd nanocatalyst was characterized by various techniques. This catalyst was found to be very efficient for the selective cross‐coupling of hydroxyl‐substituted aryl iodides and bromide with arylboronic acids in water at room temperature to produce the corresponding hydroxyl‐substituted biaryls. Coupling of phenylboronic acid with aryl iodides and bromides carrying substituents other than hydroxy group was also performed efficiently in refluxing ethanol. Copyright © 2012 John Wiley & Sons, Ltd.     

Catalytic activity of Pd(II) and Pd(II)/DAB-R systems for the Heck arylation of olefins

Palladium-catalyzed reactions of aryl bromides with various olefins involving Pd(II)/diazabutadiene (DAB-R) systems have been investigated. The scope of a coupling process using Pd(II) sources and an α-diimine as ligand in the presence of Cs₂CO₃ as base was tested using various substrates. The Pd(OAc)₂/DAB-Cy (1, DAB-Cy=1,4-dicyclohexyl-diazabutadiene) system presents the highest activity with respect to electron-neutral and electron-deficient aryl bromides in coupling with electron rich olefins. The synthesis and X-ray characterization of a Pd(II)-diazabutadiene ligand is reported. Extensive optimization experiments showed that another Pd(II) source, Pd(acac)₂ (acac=acetylacetonate), proved to activate aryl bromides at high temperatures, low catalyst loadings when the appropriate concentration of ⁿBu₄NBr additive was employed. The effect of the DAB-Cy ligand is important at very low catalyst loadings and high temperatures. Pd(acac)₂ and Pd(acac)₂/DAB-Cy precatalysts were very effective for the arylation of various olefins with aryl bromides with respect to reaction rate, catalyst loadings, and functional group tolerance.     

Amino acid promoted CuI-catalyzed C-N bond formation between aryl halides and amines or N-containing heterocycles

CuI-catalyzed coupling reaction of electron-deficient aryl iodides with aliphatic primary amines occurs at 40 degrees C under the promotion of N-methylglycine. Using l-proline as the promoter, coupling reaction of aryl iodides or aryl bromides with aliphatic primary amines, aliphatic cyclic secondary amines, or electron-rich primary arylamines proceeds at 60-90 degrees C; an intramolecular coupling reaction between aryl chloride and primary amine moieties gives indoline at 70 degrees C; coupling reaction of aryl iodides with indole, pyrrole, carbazole, imidazole, or pyrazole can be carried out at 75-90 degrees C; and coupling reaction of electron-deficient aryl bromides with imidazole or pyrazole occurs at 60-90 degrees C to provide the corresponding N-aryl products in good to excellent yields. In addition, N,N-dimethylglycine promotes the coupling reaction of electron-rich aryl bromides with imidazole or pyrazole to afford the corresponding N-aryl imidazoles or pyrazoles at 110 degrees C. The possible action of amino acids in these coupling reactions is discussed.     

在催化体系可回收和无配体条件下溴化四丁基铵中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应

我们发展一种在催化体系可回收和无配体条件下溴化四丁基铵（TBAB）中钯催化卤代芳烃与芳基硼酸的Suzuki-Miyaura交叉偶联反应方法。我们发现水的量对反应有很大的影响。当水的用量为1 %（质量比）时,反应的结果最好。在3 mol%的醋酸钯和1.5 g的TBAB（含1%的水）,一系列卤代芳烃与芳基硼酸的顺利地发生Suzuki-Miyaura交叉偶联反应,得到中等及良好的产率。而且在溴代芳烃和活泼的氯代芳烃的交叉反应中,Pd(OAc)2/TBAB催化体系可以回收重复使用多次,并且催化活性基本不变。