Spectroscopic and quantum chemical studies on 4-acryloyl morpholine

Fourier transform infrared (FTIR) and FT-Raman spectra have been recorded and an extensive spectroscopic investigations have been carried out on 4-acryloyl morpholine (4AM). Theoretical quantum chemical studies have also been performed. From the ab initio and DFT analysis using HF, B3LYP and B3PW91 methods with 6-31G(d,p) and 6-311G++(d,p) basis sets the energies, structural, thermodynamical and vibrational characteristics of the compound were determined. The energy difference between the chair equatorial and chair axial conformers of 4AM have been calculated by density functional theory (DFT) method. The optimized geometrical parameters, theoretical wavenumbers and thermodynamic properties of the molecule are compared with the experimental values. The effect of acryloyl group on the characteristic frequencies of the morpholine ring has been analysed. The mixing of the fundamental modes with the help of potential energy distribution (PED) through normal co-ordinate analysis has been discussed.     

丁烯和丁烷自由基阳离子的分子结构和超精细结构的 理论研究

用密度函数理论B3LYP方法和6-31G(d,p),6-311G(d,p)及6-311+G(d,p)基组，分别对1-C4H^+~8,2-C4H^+~8和C4H^+~10进行了构型优化和频率分析计算，预言1-C4H^+~8具有非平面构型，与以往报道的从头算和密度函数理论计算结果不同。在各自由基阳离子的B3LYP构型上，进行了B3LYP、MP2及MRSDCI方法的超精细偶合常数计算，得到了比以往更好的结果，特别是MP2/B3LYP计算值是至今与实验值符合得最好的理论计算结果。     

Computational evaluation concerning the deviation of the atoms in 1- and 4-postions on the six-member ring and the effects on 1HNMR chemical shift

Density functional theory (DFT) calculations were carried out on some cyclohexane derivatives to investigate the deviation atoms on the 1- and 4-positions of chair plane. The deviations of chair plane of two position in the cyclohexane derivatives were calculated at the B3LYP/6-31 ++ G(d,p) level. Furthermore, we investigated the correlation between deviations of two positions from chair plane on the chemical shift hydrogen atoms on the 4-position.     

A computational study of conformational interconversions in 1,4-dithiacyclohexane (1,4-dithiane)

Ab initio molecular orbital theory with the 6-31G(d), 6-31G(d,p), 6-31+G(d), 6-31+G(d,p), 6-31+G(2d,p), 6-311G(d), 6-311G(d,p), and 6-311+G(2d,p) basis sets and density functional theory (BLYP, B3LYP, B3P86, B3PW91) have been used to locate transition states involved in the conformational interconversions of 1,4-dithiacyclohexane (1,4-dithiane) and to calculate the geometry optimized structures, relative energies, enthalpies, entropies, and free energies of the chair and twist conformers. In the chair and 1,4-twist conformers the C-Hax and C-Heq bond lengths are equal at each carbon, which suggest an absence of stereoelectronic hyperconjugative interactions involving carbon-hydrogen bonds. The 1,4-boat transition state structure was 9.53 to 10.5 kcal/mol higher in energy than the chair conformer and 4.75 to 5.82 kcal/mol higher in energy than the 1,4-twist conformer. Intrinsic reaction coordinate (IRC) calculations showed that the 1,4-boat transition state structure was the energy maximum in the interconversion of the enantiomers of the 1,4-twist conformer. The energy difference between the chair conformer and the 1,4-twist conformer was 4.85 kcal/mol and the chair-1,4-twist free energy difference (deltaG degrees (c-t)) was 4.93 kcal/mol at 298.15 K. Intrinsic reaction coordinate (IRC) calculations connected the transition state between the chair conformer and the 1,4-twist conformer. This transition state is 11.7 kcal/mol higher in energy than the chair conformer. The effects of basis sets on the 1,4-dithiane calculations and the relative energies of saturated and unsaturated six-membered dithianes and dioxanes are also discussed.     

FT-IR and FT-Raman spectroscopic investigation, computed vibrational frequency analysis and IR intensity and Raman activity peak resemblance analysis on 2-nitroanisole using HF and DFT (B3LYP and B3PW91) calculations

Fourier-transform Raman and infrared spectra of 2-nitroanisole are recorded (4000-100 cm(-1)) and interpreted by comparison with respective theoretical spectra calculated using HF and DFT method. The geometrical parameters with C(S) symmetry, harmonic vibrational frequencies, infrared and Raman scattering intensities are determined using HF/6-311++G (d, p), B3LYP/6-311+G (d, p), B3LYP/6-311++G (d, p) and B3PW91/6-311++G (d, p) level of theories. A detailed vibrational spectral analysis has been carried out and assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The results of the calculations have been used to simulate IR and Raman spectra for the molecule that showed good agreement with the observed spectra. The SQM method, which implies multiple scaling of the DFT force fields has been shown superior to the uniform scaling approach. The vibrational frequencies and the infrared intensities of the C-H modes involved in back-donation and conjugation are also investigated.     

Molecular structure, vibrational spectra and NBO analysis of phenylisothiocyanate by density functional method

The molecular geometry, vibrational frequencies and NBO analysis of phenylisothiocyanate (PITC) in the ground state have been calculated by using density functional theory calculation (B3LYP) with 6-311++G(d,p) basis set. The optimized geometrical parameters obtained by DFT calculations are in good agreement with experimental values. Comparison of the observed fundamental vibrational frequencies of the PITC and calculated result by density functional theory (B3LYP) indicates B3LYP is superior for molecular vibrational problems. The entropy of the title compound was also performed at HF/B3LYP/6-311++G(d,p) levels of theory. Natural bond orbital (NBO) analysis of title molecule is also carried out. A detailed interpretation of the IR and Raman spectra of PITC is reported on the basis of the calculated potential energy distribution (PED). The theoretical spectrogram for IR spectrum of the title molecule has been constructed.     

Studies of some monocyclic and bicyclic arylacetonitriles

The high-resolution (1)H, (13)C, (1)H-(1)H COSY and (1)H-(13)C COSY NMR spectra have been recorded in CDCl(3) for arylacetonitriles 1-12 and analyzed. The arylacetonitriles 3-7 exist in two isomeric forms E (methyl group is anti to cyano group) and Z (the methyl group is syn to cyano group) in solution. Normal chair conformation with equatorial orientations of phenyl rings at C-2 and C-6 for monocyclic nitriles 1 and 2, epimeric chair structure EC (axial configuration of methyl group at C-3) for both the E and Z isomers of arylacetonitrile derivatives (3-7) and a distorted boat form, B(3), for the N-acylacetonitrile derivatives (8-10) have been proposed based on NMR data. The bicyclic nitriles 11 and 12 exist in twin chair conformations in solution. DFT calculations and chemical shifts also support these conformations. Geometry optimizations for 1-12 were carried out according to density functional theory using B3LYP/6-31G(d,p) basis set and for 1 and 8 the theoretical geometrical parameters have been compared with those of single crystal measurements.     

戊烯自由基阳离子的密度泛函理论研究

使用密度泛函理论B3LYP方法和6-31G(d,p)、6-31＋G(d,p)、6-311G(d,p)及6-311＋G(d,p)基组，分别对2-C5H10＋和1-C5H10＋的各种构象进行了几何构型优化，并用B3LYP/6-311G(d,p)进行了频率分析计算.计算预言1-C5H10＋具有非平面构型，与以往报导的从头算计算结论相反.在两个自由基阳离子的各种构象的B3LYP几何构型上，进行了B3LYP和UMP2(full)方法的超精细偶合常数计算，得到了比以往更好的结果.     

Density functional theory studies on vibrational and electronic spectra of 2-chloro-6-methoxypyridine

The Fourier transform infrared (FTIR) and FT-Raman spectra of 2-chloro-6-methoxypyridine have been recorded in the range 3700-400 and 3700-100 cm(-1), respectively. The complete vibrational assignment and analysis of the fundamental modes of the compound was carried out using the observed FTIR and FT-Raman data. The vibrational frequencies determined experimentally were compared with the theoretical frequencies computed by DFT gradient calculations (B3LYP method) employing the 6-31G(d,p), cc-pVTZ and/6-311++G(d,p) basis sets for the optimised geometry of the compound. The geometry and normal modes of vibration obtained from the DFT methods are in good agreement with the experimental data. The normal co-ordinate analysis was also carried out using DFT force fields utilising Wilson's FG matrix method. The influence of the substituents bulky chlorine atom and the methoxy group on the spectral characteristics of the compound has been discussed. The electronic spectrum determined by TD-DFT method is compared with the observed electronic spectrum.     

Molecular structure and vibrational analysis of 3-Ethylpyridine using ab initio HF and density functional theory (B3LYP) calculations

The FT-Raman and FT-IR spectra for 3-Ethylpyridine (3-EP) have been recorded in the region 4000-100 cm(-1) and compared with the harmonic vibrational frequencies calculated using HF/DFT (B3LYP) method by employing 6-31G(d,p) and 6-311++G(d,p) basis set with appropriate scale factors. IR intensities and Raman activities are also calculated by HF and DFT (B3LYP) methods. Optimized geometries of the molecule have been interpreted and compared with the reported experimental values of some substituted benzene. The experimental geometrical parameters show satisfactory agreement with the theoretical prediction from HF and DFT. The scaled vibrational frequencies at B3LYP/6-311++G(d,p) seem to coincide with the experimentally observed values with acceptable deviations. The theoretical spectrograms (IR and Raman) have been constructed and compared with the experimental FT-IR and FT-Raman spectra. Some of the vibrational frequencies of the pyridine are effected upon profusely with the C2H5 substitutions in comparison to pyridine and these differences are interpreted.     

New insights into an old reaction. High-resolution x-ray powder diffraction of Wiberg's aminoalane intermediate

In accordance with the procedure described by E. Wiberg, Me(3)Al-NH(3) was heated as a bulk material in inert atmosphere to give a colorless liquid which slowly loses methane. Close to the end of this elimination reaction, the melt crystallized to give a microcrystalline powder of (Me(2)AlNH(2))(x)(). The structure of this intermediate has been solved by the method of high-resolution X-ray powder diffraction. The compound crystallizes in the monoclinic space group C2/c with the cell parameters of a = 15.0047(6) A, b = 8.7500(2) A, c = 24.4702(8) A, and beta = 107.290(2) degrees, with eight trimers (Me(2)AlNH(2))(3) per unit cell. These trimers crystallize in a boat conformation in contrast to the known trimers of the same composition where a twist-boat conformation had been found by single crystal determination. Different conformers of (Me(2)AlNH(2))(3) have been investigated by theoretical methods (HF/6-31G(d), B3LYP/6-31G(d), B3LYP/6-311G(d,p), MP2(fc)/6-31G(d), and MP2(fc)/6-311G(d,p)). The twist-boat and the chair conformer correspond to minima at the potential energy surface, whereas the boat conformer corresponds to a first-order transition state (relative energies of 0.45-2.56 kJ/mol (boat) and 6.66-11.91 kJ/mol (chair)). Relaxed scans of the potential energy surface at the HF/6-31G(d) and B3LYP/6-31G(d) levels have shown that the boat conformer (C(s)() symmetry) connects two enantiomers of the twist-boat form (C(2) symmetry).     

Theoretical study on gas-phase conformations and vibrational assignment of methylphenidate

The molecular geometry, the normal mode frequencies and corresponding vibrational assignments of methylphenidate in the ground state were performed by DFT/B3LYP level of theory using the 6-311++G(d, p) basis set. Harmonic vibrational frequencies were calculated. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. The conformational stabilities and optimized geometrical parameters have been carried out with density functional theory with 6-311++G(d, p) basic set by the DFT/B3LYP method. The frequency calculations have been performed with DFT to study the vibrational properties and their dependence on the molecular conformation.     

Conformational analysis of cycloheptane,oxacycloheptane, 1,2‐dioxacycloheptane, 1,3‐dioxacycloheptane,and 1,4‐dioxacycloheptane

The conformational analysis of cycloheptane (1), oxacycloheptane (2), 1,2‐dioxacycloheptane (3), 1,3‐dioxacycloheptane (4), and 1,4‐dioxacycloheptane (5) has been carried out using B3LYP, CCD, CCSD, and QCISD with the 6‐311+G(d,p) and cc‐pVDZ basis sets. The twist chair conformers are predicted to be lower in energy than their corresponding boat and chair conformations. All levels of theory predict (4) to be lower in energy than (3) and (5). CCSD predicts remarkably similar activation barriers for the conformational interconversion of the twist chair conformers to their corresponding boat conformers. Small barriers to pseudorotation are also predicted. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

A theoretical study of nonlinearity in heterocyclic hydrogen-bonded complexes

Ab initio calculations are performed at the MP2/6-311++G(d,p) and DFT/B3LYP/6-311++G(d,p) theoretical levels to obtain geometries, H-bond energies and harmonic infrared vibrational properties for the Cs symmetry structures of heterocyclic hydrogen-bonded complexes, CnHmY-HX. The H-bond lengths in DFT/B3LYP calculation level are in better agreement with the experimental values than the MP2 results. The geometry optimization are interpreted in terms of hydrogen bond nonlinearity represented by theta; and phi angles, once the hydrogen bond is formed among n-electrons pairs of the heteroatom in heterocyclic and the hydrogen atom in HX. The hydrogen bond energy after of the zero-point vibrational energy (ZPE) and basis set superposition error (BSSE) corrections are overestimated at DFT/B3LYP, whereas the MP2 BSSE corrections are very large than corresponding DFT/B3LYP. For example, the BSSE corrections for the C2H4S-HNC complex are 7.60 and 0.09 kJ mol(-1) in MP2 and DFT/B3LYP calculations levels, respectively. The new vibrational modes in infrared harmonic spectrum arising from complexation show several interesting features, especially the intermolecular stretching mode.     

Structural elucidation of nitro-substituted five-membered aromatic heterocycles utilizing GIAO DFT calculations

The GIAO (Gauge Including Atomic Orbitals) DFT (Density Functional Theory) method is applied at the B3LYP/6-31+G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311++G(d,p)//B3LYP/6-31+G(d), B3LYP/6-311+G (2d,p)//B3LYP/6-31+G(d) and B3LYP/6-311++G(d,p)//B3LYP/6-311++G(d,p) levels of theory for the calculation of proton and carbon chemicals shifts and coupling constants for 25 nitro-substituted five-membered heterocycles. Difference (1D NOE) spectra in combination with long-range gHMBC experiments were used as tools for the structural elucidation of nitro-substituted five-membered heterocycles. The assigned NMR data (chemical shifts and coupling constants) for all compounds were found to be in good agreement with theoretical calculations using the GIAO DFT method. The magnitudes of one-bond (1JCH) and long-range (nJCH, n>1) coupling constants were utilized for unambiguous differentiation between regioisomers of nitro-substituted five-membered heterocycles.     

Performance of theoretical methods and basis sets on the molecular structure, atomisation and ionisation energies, electron affinity, and vibrational spectrum of silylene

This work compares the performance of theoretical methods and basis sets on the molecular structure, atomisation and ionisation energies, electron affinity, and vibrational spectrum of silylene. Silylene, its cation and anion have been studied in ¹ A ₁, ² A ₁ and ² B ₁ states, respectively, in the gas phase and C_2v symmetry. The methods considered are second-order Møller-Plesset perturbation theory (MP2), the density functional theory (DFT), Gaussian-2 (G2) and complete basis set methods (CBS-4M and CBS-Q). The basis sets used are 6-31G(d,p), 6-311G(d,p), 6-31++G(d,p) and 6-311++G(d,p). The functional used for the DFT method is B3LYP. Silylene and its cation and anion have been optimised using the MP2 and DFT methods and the named basis sets. Single-point energy calculations (G2, CBS-4M and CBS-Q) were performed using MP2/6-311++G(d,p) structures and these energies have been used to calculate atomisation energy, ionisation energy and adiabatic electron affinity. Frequency calculations were also done and the raw vibrational frequencies were assigned. It is interesting to note the close similarity between the predicted parameters and some of the available literature values. The results obtained are consistent and converge with different basis sets with improved size and quality. However, the parameters obtained are very much method dependent.     

A Computational Study of Chair–Twist Energy Differences and the Chair–Chair Conformational Interconversion in Tetrahydro-2H-thiopyran (Thiacyclohexane,Thiane)

Ab initio molecular orbital theory with the LANL2DZ, 3-21G, 6-31G(d), 6-31+G(d), 6-31+G(d,p), 6-311+G(d,p),6-31G(2d), 6-31G(3d), and 6-311G(d,p) basis sets and density functional theory (B3P86, B3LYP, B3PW91) have been used to calculate the structures, relative energies, enthalpies, entropies, and free energies of the chair, 1,4-twist, and 2,5-twist conformers of tetrahydro-2H-thiopyran (tetrahydrothiopyran, thiacyclohexane, thiane, pentamethylene sulfide). All levels of theory calculated similar energy values and the effect of basis sets on the calculated energies was small. The chair conformer of tetrahydro-2H-thiopyran was 5.27 kcal/mol more stable than the 1,4-twist conformer, which was slightly more stable (0.81 kcal/mol) than the 2,5-twist conformer. The chair–1,4-twist and chair–2,5-twist free energy differences ( G°_{c – t}) were 5.44 and 5.71 kcal/mol, respectively. Intrinsic reaction coordinate [IRC, minimum-energy path (MEP)] calculations connected the transition state between the chair and the 2,5-twist conformers. This transition state is 9.73 kcal/mol higher in energy than the chair conformer and the energy differences between the chair and the 1,4-boat and 2,5-boat transition states were 8.07 and 6.38 kcal/mol, respectively. Stereoelectronic hyperconjugative interactions were observed in the chair, 1,4-twist, and 2,5-twist conformers of tetrahydro-2H-thiopyran. The stereoelectronic hyperconjugative effects in the chair conformer of tetrahydro-2H-thiopyran have been compared to those in the respective chair conformers of tetrahydro-2H-pyran, tetrahydro-2H-selenane, and tetrahydro-2H-tellurane.     

Theoretical studies of azapentalenes. Part 4: Theoretical study of the properties of 3a,6a-diazapentalene

A theoretical study of the properties of the isolated 3a,6a-diazapentalene by means of DFT, B3LYP/6-311++G(d,p) and ab initio methods, MP2/6-311++G(d,p), has been carried out. In addition, the complexes formed with hydrogen bond donor, acceptors, cations, and anions have been studied and analyzed. Ring opening into 1,5-diazocine as well as basicity and acidity properties of 3a,6a-diazapentalene have been explored. Their ability to form HB complexes and the complexes formed with anions and cations have been studied.     

Conformational isomerization of 4-methyl-1,3-dioxane

The whole possible course of conformational isomerization of 4-methyl-1,3-dioxane has been established using empirical (MM+) and nonempirical [STO-3G, 3-21G, 6-31G(d) and 6-31G(d,p)] approximations within the limits of the Hartree-Fock method. It was shown that the potential energy surface of this compound contains a principal (equatorial chair conformer) and local minima corresponding to the axial chair conformer and series flexible forms.