离子液体在多水相液液平衡体系中的作用

通过用短链离子液体(1-乙基-3-甲基咪唑溴盐[C2mim]Br、1-丁基-3-甲基咪唑溴盐[C4mim]Br)部分或全部取代SDS/DTAB/PEG/NaBr/H2O多水相体系中的无机盐NaBr,用长链离子液体十二烷基-3-甲基咪唑溴盐[C12mim]Br部分取代体系中阳离子表面活性剂DTAB,系统研究了离子液体在分相体系中的作用及其对分相体系性质的影响.研究表明,SDS/DTAB/PEG/NaBr/H2O混合体系形成的四水相体系可以看作"聚合物双水相"与"表面活性剂双水相"共存的结果.短链离子液体([C2mim]Br、[C4mim]Br)较强的亲水性能赋予其较强的盐析能力,在混合体系中表现出明显的盐效应,保证了四水相体系中"聚合物双水相"的存在.短链离子液体与聚合物之间的相互作用及其对表面活性剂之间相互作用的影响均不可忽略.对混合体系的相行为,共存多相的性质有重要的影响.而长链离子液体[C12mim]Br主要通过自身的疏水作用影响"表面活性剂双水相"的性质,充当表面活性剂的角色.然而,[C12mim]Br与DTAB分子结构上的差异,导致表面活性剂分子在"表面活性剂双水相"的两相重新分配,影响了对应两相的体积及萃取能力.可见,通过调节离子液体的烷基链长、混合体系中的含量等可获得具有特定性质的多水相体系.     

利用双水相分离回收离子液体的研究进展

研究离子液体的分离与回收对于减少离子液体对环境的影响、提高离子液体的利用效率、降低离子液体的应用成本、促进离子液体的工业应用具有重要的意义.本文重点综述了利用无机盐-离子液体双水相、糖-离子液体双水相、聚合物-离子液体双水相和CO2诱导的离子液体双水相技术分离回收离子液体的研究进展,分析了影响离子液体分离回收的关键因素,评价了不同离子液体双水相体系的优缺点,展望了该领域的发展方向及面临的挑战.     

Controlling the Formation of Ionic‐Liquid‐based Aqueous Biphasic Systems by Changing the Hydrogen‐Bonding Ability of Polyethylene Glycol End Groups

The formation of aqueous biphasic systems (ABS) when mixing aqueous solutions of polyethylene glycol (PEG) and an ionic liquid (IL) can be controlled by modifying the hydrogen‐bond‐donating/‐accepting ability of the polymer end groups. It is shown that the miscibility/immiscibility in these systems stems from both the solvation of the ether groups in the oxygen chain and the ability of the PEG terminal groups to preferably hydrogen bond with water or the anion of the salt. The removal of even one hydrogen bond in PEG can noticeably affect the phase behavior, especially in the region of the phase diagram in which all the ethylene oxide (EO) units of the polymeric chain are completely solvated. In this region, removing or weakening the hydrogen‐bond‐donating ability of PEG results in greater immiscibility, and thus, in a higher ability to form ABS, as a result of the much weaker interactions between the IL anion and the PEG end groups.     

Aqueous biphasic systems: a boost brought about by using ionic liquids

During the past decade, ionic-liquid-based Aqueous Biphasic Systems (ABS) have been the focus of a significant amount of research. Based on a compilation and analysis of the data hitherto reported, this critical review provides a judicious assessment of the available literature on the subject. We evaluate the quality of the data and establish the main drawbacks found in the literature. We discuss the main issues which govern the phase behaviour of ionic-liquid-based ABS, and we highlight future challenges to the field. In particular, the effect of the ionic liquid structure and the various types of salting-out agents (inorganic or organic salts, amino acids and carbohydrates) on the phase equilibria of ABS is discussed, as well as the influence of secondary parameters such as temperature and pH. More recent approaches using ionic liquids as additives or as replacements for common salts in polymer-based ABS are also presented and discussed to emphasize the expanding number of aqueous two-phase systems that can actually be obtained. Finally, we address two of the main applications of ionic liquid-based ABS: extraction of biomolecules and other added-value compounds, and their use as alternative approaches for removing and recovering ionic liquids from aqueous media.     

Some Aspects of Ionic Liquids as Diverse and Versatile Sustainable Solvents

In this mini review several particular cases of ionic liquid solution behavior are discussed, namely solutions of ionic liquids with aliphatic alcohols, polyalcohols, arenes, chloromethanes and poly(ethyleneglycol) as well as salting-out and salting-in effects. The presented cases clearly expose ionic liquids as being diverse and versatile sustainable solvents that exhibit flexible phase behavior and, consequently, variable phase diagrams. These can be tuned either by changing the length of the alkyl chain(s) of the ionic liquid??s cation (and/or sometimes the anion), or by introducing a different aliphatic nature to the other solution constituent (e.g., by varying polymer chain length or the number of carbon atoms in chloromethanes). Sometimes, the evolution of the phase diagrams is fine and continuous, showing several consecutive stages, revealing both qualitative and quantitative changes. Finally, the diversity and versatility of ionic liquids are viewed as important features that contribute to their efficiency as tunable solvents or salting media.     

以离子液体为流动相添加剂高效液相色谱法分离钩藤药材中的钩藤碱和异钩藤碱

以常用流动相添加剂三乙胺作为对照,建立了以离子液体为流动相添加剂,分离钩藤药材中钩藤碱和异钩藤碱的高效液相色谱方法。以分离度及相关色谱参数为指标,选择了离子液体中咪唑阳离子烷基链长度及阴离子的种类。并分别考察了咪唑阳离子烷基链长度、离子液体浓度、流动相pH值和流动相比例对钩藤碱和异钩藤碱分离的影响,初步探讨了离子液体的分离机理。结果显示,咪唑阳离子的烷基链越长,阴离子的离子液体序列越高,分离效果越好,即[HMIM][BF_4]为最优的流动相添加剂。当[HMIM][BF_4]浓度为16 mmol/L,流动相pH值为3.0,甲醇比例为37%时,钩藤碱和异钩藤碱能够实现基线分离,满足样品分离测定的需求。     

Solutions of ionic liquids with diverse aliphatic and aromatic solutes – Phase behavior and potentials for applications: A review article

This article principally reviews our research related to liquid–liquid and solid–liquid phase behavior of imidazolium- and phosphonium-based ionic liquids, mainly having bistriflamide ([NTf₂]⁻) or triflate ([OTf]⁻) anions, with several aliphatic and aromatic solutes (target molecules). The latter include: (i) diols and triols: 1,2-propanediol, 1,3-propanediol and glycerol; (ii) polymer poly(ethylene glycol) (PEG): average molecular mass 200, 400 and 2050 – PEG200 (liquid), PEG400 (liquid) and PEG2050 (solid), respectively; (iii) polar aromatic compounds: nicotine, aniline, phenolic acids (vanillic, ferulic and caffeic acid,), thymol and caffeine and (iv) non-polar aromatic compounds (benzene, toluene, p-xylene). In these studies, the effects of the cation and anion, cation alkyl chain and PEG chain lengths on the observed phase behaviors were scrutinized. Thus, one of the major observations is that the anion – bistriflamide/triflate – selection usually had strong, sometimes really remarkable effects on the solvent abilities of the studied ionic liquids. Namely, in the case of the hydrogen-bonding solutes, the ionic liquids with the triflate anion generally exhibited substantially higher solubility than those having the bistriflamide anion. Nevertheless, with the aromatic compounds the situation was the opposite – in most of the cases it was the bistriflamide anion that favoured solubility. Moreover, our other studies confirmed the ability of PEG to dissolve both polar and non-polar aromatic compounds. Therefore, two general possibilities of application of alternative, environmentally acceptable, solvents of tuneable solvent properties appeared. One is to use homogeneous mixtures of two ionic liquids having [NTf₂]⁻ and [OTf]⁻ anions as mixed solvents. The other, however, envisages the application of homogeneous and heterogeneous (PEG + ionic liquid) solutions as tuneable solvents for aromatic solutes.Such mixed solvents have potential applications in separation of the aforesaid target molecules from their aqueous solutions or in extraction from original matrices. From the fundamental point of view the phase equilibrium studies reviewed herein and the diversity of the pure compounds – ionic liquids and target molecules – represent a good base for the discussion of interactions between the molecules that exist in the studied solutions.     

Polyelectrolyte-surfactant association—from fundamentals to applications

Mixed polymer-surfactant systems have broad applications, ranging from detergents, paints, pharmaceutical, and cosmetic to biotechnological. A review of the underlying polymer-surfactant association in bulk is given. While ionic surfactants bind broadly to polymers, nonionics only do so if the polymer has a lower polarity and can interact by hydrophobic interactions. Water-soluble polymers, which have hydrophobic groups, form physical cross-links, hence they may be used as thickeners. The rheological behaviour is strongly influenced by various cosolutes; especially strong effects are due to surfactants and both a decrease and an increase in viscosity can occur. When the polymer-surfactant interactions are particularly strong, an associative phase separation can occur, like in the case where there is electrostatic attraction as well as hydrophobic; this and other types of phase separation phenomena are described. Except for linear ionic and nonionic polymers, the interactions between surfactants and cross-linked polymers, microgel particles and covalent macroscopic gels are analyzed, as well as the possibility of forming gel particles of interest for encapsulation purposes. Furthermore, the behavior of these mixed systems on surfaces is discussed. In particular, we consider the adsorption of mixtures of ionic polymers and oppositely charged surfactants on polar and nonpolar surfaces. Depending on concentration, an ionic surfactant can either induce additional polyion adsorption or induce desorption. Kinetic control of adsorption and, in particular, desorption is typical. Important consequences of this include an increased adsorption on rinsing and path dependent adsorbed layers. Recently, considerable attention has been given to the interaction between DNA and cationic surfactant, both as a means to understand the behaviour of DNA in biological systems and to develop novel formulations, for example for gene therapy. Here we review aspects such as DNA compaction, DNA covalent gels and DNA soft nanoparticles.     

Analysis of selected ionic liquid cations by ion exchange chromatography and reversed-phase high performance liquid chromatography

The chromatographic behavior of 8 ionic liquids - 7 homologues of 1-alkyl-3-methylimidazolium and 4-methyl-N-butylpyridinium - has been investigated with a strong cation exchange adsorbent. In particular, the dependence of the retention properties of these solutes on mobile phase composition, pH, and buffer concentration was evaluated with the aim of optimizing and improving the selectivity and retention of solute separation. While using the SCX stationary phase, several interactions occurred with varying strengths, depending on the mobile phase composition. Cation exchange, nonspecific hydrophobic interactions, and adsorption chromatography behavior were observed. Reversed phase chromatography occurred at low concentrations of acetonitrile, electrostatic and adsorption interactions at higher organic modifier concentrations. Elevated buffer concentrations lowered the retention factors without affecting the selectivity of ionic liquids. Obtained results were further compared to the chromatographic behaviour of ionic liquids in the reversed phase system. All analyzed ionic liquids follow reversed-phase behavior while being separated. Much lower selectivity in the range of highly hydrophilic compounds is obtained. This suggests preferred use of ion chromatography for separation and analysis of compounds below 4 carbon atoms in the alkyl side chain.     

Thermodynamic studies of partitioning behavior of cytochrome c in ionic liquid-based aqueous two-phase system

The ionic liquid/aqueous two-phase extraction systems (ATPSs) based on imidazolium ionic liquids were used to extract cytochrome c. Effects of the alkyl chain length of the ionic liquid cations, concentration of potassium citrate, temperature and pH on the extraction efficiency have been investigated. The thermodynamic parameters (ΔG(T)°, ΔH(T)° and ΔS(T)°) associated with Cyt-c partitioning in aqueous two phase systems were determined. Thermodynamic studies indicated that the partitioning of Cyt-c was driven by both hydrophobic and electrostatic interactions in the extraction process. Under the optimum conditions, experiment results showed that 94% of the cytochrome c could be extracted into the ionic liquid-rich phase in a one-step extraction. The structural characterization of Cyt-c in the IL ATPS was investigated by UV-vis and circular dichroism (CD) spectra. The results demonstrated that no direct bonding interaction observed between ionic liquid and cytochrome c, while the native properties of the cytochrome c were not altered. Compared with traditional liquid-liquid extractions based on toxic organic solvents, ionic liquid/aqueous two phase extraction offers clear advantages due to no use of volatile organic solvent and low consumption of imidazolium ionic liquids.     

正负离子表面活性剂/离子液体双水相性质研究

本文把短链离子液体(IL)四氟硼酸1-乙基-3-甲基咪唑鎓[C2mim]BF4引入正负离子表面活性剂十二烷基硫酸钠(SDS)和十二烷基三甲基溴化铵(DTAB)双水相体系(SDS/DTAB/H2O)中,研究了IL对双水相相图及相分离体系性质的影响。结果表明,[C2mim]BF4的阳离子性质是影响阴离子表面活性剂过量区域性质的主要因素,IL通过静电作用、氢键作用等改变体系中聚集体的形貌,最终导致阴离子双水相(ATPSa)的消失。IL的阴离子对阳离子双水相(ATPSc)区域性质起着决定作用;IL的盐效应引起的对表面活性剂混合胶束扩散双电层的压缩作用,不但促进胶团的形成,缩短了形成稳定胶团所需要的时间,加快了双水相的相分离速度,而且也造成了形成ATPSc所需DTAB含量的提高。IL的引入改变了ATPSc上、下相表面活性剂的组成及含量,使富含表面活性剂的上相中阳离子表面活性剂含量更高,进而提高了双水相的萃取性能,其上相对甲基橙的萃取效率可高达96.67%。     

Evaluation of the impact of phosphate salts on the formation of ionic-liquid-based aqueous biphasic systems

The present study aims at evaluating the capability of phosphate-based salts, whose anions can coexist in water depending on the media pH, to promote aqueous biphasic systems (ABS) formation with 1-butyl-3-methylimidazolium-based ionic liquids, as well as to infer on the influence of the ionic liquid anion in the overall process of liquid–liquid demixing. In this context, novel phase diagrams of ABS composed of several imidazolium-based ionic liquids and three phosphate salts and a mixture of salts (K₃PO₄, K₂HPO₄, K₂HPO₄ + KH₂PO₄, and KH₂PO₄) were determined by the cloud point titration method at 298 K and atmospheric pressure. The corresponding tie-line compositions, tie-line lengths, and pH values of the coexisting phases were also determined. The ionic liquids ability to promote ABS is related with the hydrogen-bond basicity of the composing anion – the lower it is the higher the ability of the ionic fluid to undergo liquid–liquid demixing. Moreover, similar patterns on the ionic liquids sequence were observed with the different phosphate salts. The phosphate anion charge plays a determinant role in the formation of ABS. The two-phase formation aptitude (with a similar ionic liquid) decreases in the rank: K₃PO₄ > K₂HPO₄ > K₂HPO₄ + KH₂PO₄ > KH₂PO₄. Yet, besides the charge of the phosphate anion, the pH and ionic strength of the aqueous media also influence the phase separation ability.     

Cationic polymerization of styrene involving ionization of the C?Cl bond in ionic liquid/SO2 mixture

There has been a recent upsurge in interest in use of ionic liquids as reaction media for various chemical processes. Until recently, ionic liquids were considered as highly polar solvents. Our earlier investigation indicated that cationic polymerization of styrene initiated by aryl (alkyl) chlorides in ionic liquids may proceed even in the absence of coinitiator (Lewis acid). Polymerization, however, did not conform to controlled polymerization scheme. More recently, it has been claimed that ionic liquids are not as polar as it was previously assumed. Independently, high solubility of sulfur dioxide in ionic liquids was noticed. As sulfur dioxide displays a high ionizing power toward organic halides, we applied ionic liquid/sulfur dioxide mixture as a solvent in cationic polymerization of styrene initiated by aryl (alkyl) chlorides. Results show that in this reaction medium ionization of the C? Cl bond is facilitated, and the contribution of chain transfer reaction can be reduced as compared with polymerization in ionic liquid alone. Ionization of the C? Cl bond, however, is still not sufficiently fast to ensure conditions of controlled polymerization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5251–5257, 2009     

Novel Biocompatible and Self‐buffering Ionic Liquids for Biopharmaceutical Applications

Antibodies obtained from egg yolk of immunized hens, immunoglobulin Y (IgY), are an alternative to the most focused mammal antibodies, because they can be obtained in higher titers by less invasive approaches. However, the production cost of high‐quality IgY for large‐scale applications remains higher than that of other drug therapies due to the lack of efficient purification methods. The search for new purification platforms is thus vital. The solution could be liquid–liquid extraction by using aqueous biphasic systems (ABS). Herein, we report the extraction and attempted purification of IgY from chicken egg yolk by using a new ABS composed of polymers and Good’s buffer ionic liquids (GB‐ILs). New self‐buffering and biocompatible ILs based on the cholinium cation and anions derived from Good’s buffers were synthesized and the self‐buffering characteristics and toxicity were characterized. Moreover, when these GB‐ILs are combined with PPG 400 (poly(propylene) glycol with a molecular weight of 400 g mol^‐1) to form ABS, extraction efficiencies, of the water‐soluble fraction of proteins, ranging between 79 and 94 % were achieved in a single step. Based on computational investigations, we also demonstrate that the preferential partitioning of IgY for the GB‐IL‐rich phase is dominated by hydrogen‐bonding and van der Waals interactions.     

Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples

A novel 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted solid‐phase sorbent was synthesized. The as‐prepared material was characterized by SEM, Brunauer–Emmett–Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C_nmimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1‐butyl‐3‐methyl imidazolium chloride ionic liquid. The average recoveries of 1‐butyl‐3‐methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0–102.0% with the RSD lower than 5.8%.     

聚离子液体材料在分离科学中的研究进展

离子液体作为新型离子化试剂,具有诸多优越的物理化学性质,比如:良好的溶解性、导电性、热稳定性、生物相容性及低蒸气压和不易燃等特点,近年来在分析化学领域得到广泛关注。聚离子液体材料结合了离子液体和聚合物的双重性质,已经成为分离科学研究的前沿领域。本文详细讨论了离子液体与目标物之间的多种作用机制,比如亲/疏水作用、氢键作用、离子交换、π - π 堆积及静电吸附作用等等,总结了聚离子液体材料在固相萃取、液相色谱、气相色谱、毛细管电泳及毛细管电色谱等领域的研究进展;最后,对聚离子液体材料的发展前景进行了展望。     

Effects of ionic liquid as additive and the pH of the mobile phase on the retention factors of amino benzoic acids in RP-HPLC

As an organic salt, ionic liquids are widely used as new solvent media. In this paper, three positional isomers, such as o-amino benzoic acid, m-amino benzoic acid, and p-amino benzoic acid are separated with four different ionic liquids as additives to the mobile phase using reversed-phase (RP) high-performance liquid chromatography (HPLC). Amino benzoic acids are biologically active substances; the p-isomer is present in a group of water-soluble vitamins and is widely known as a sunscreen agent. The ionic liquids used are 1-butyl-3-methylimidazolium tetrafluoroborate, 1-ethyl-3-methylimidazolium tetrafluoroborate, 1-ethyl-3-methylimidazolium methylsulfate, and 1-octyl-3-methylimidazolium methylsulfate. The effects of the length of the alkyl group on the imidazolium ring and its counterion, the concentrations of the ionic liquid, and the effect of the pH of the mobile phase on the retention factor of the amino benzoic acid isomers are studied. Separation with the ionic liquid in the eluent was better than the separation without the ionic liquid. The pH mainly affected the retention and elution order of the solutes in RP-HPLC.     

Thermoregulated ionic liquids and their application for the hydroformylation of 1‐dodecene catalyzed by Rh/TPPTS complex

Based on the synthesis of a new kind of room temperature ionic liquids, quaternary ammonium alkanesulfonate salts tailed with polyether chain to their alkyl group, a thermoregulated ionic liquid biphase system composed of IL_PEG750, n‐heptane and toluene was developed. The system was applied in the hydroformylation of 1‐dodecene catalyzed by Rh/TPPTS complex. Under the optimum conditions, the conversion of 1‐dodecene and yield of aldehyde are 99% and 97%, respectively. In addition, the catalyst could be easily separated from products by phase separation and efficiently recovered. Copyright © 2008 John Wiley & Sons, Ltd.     

Functional Columnar Liquid Crystalline Phases From Ionic Complexes of Dendronized Polymers and Sulfate Alkyl Tails

We describe how cationic dendronized polymers of generations 1, and 2 and anionic monoalkyl tails can be combined by supramolecular ionic complexation into comb-like liquid crystalline polymers. The final structures in bulk of these supramolecular complexes were studied by differential scanning calorimetry (DSC), cross-polarized optical microscopy (CPOM), small angle x-rays scattering (SAXS) and transmission electron microscopy (TEM). The combination of these techniques allowed elucidating (i) that these complexes exhibit thermotropic behaviour, (ii) that various liquid crystalline structures in the 3–5 nm length scale can be obtained such as columnar rectangular, columnar tetragonal, columnar hexagonal and lamellar, depending both on alkyl tail length and polymer generation, (iii) that although the alkyl tails represent the majority phase in the columnar phases, they form the cylindric domains, and the dendronized polymers occupy the continuous domains. Therefore, upon selective cleavage of the alkyl tails in the columnar phases, the present self-assembly approach may constitute an efficient strategy towards the formation of porous organic matrices with ultra-dense pore size in the range of 2 to 4 nm.     

Self‐Assembly of Imidazolium‐Based Surfactants in Magnetic Room‐Temperature Ionic Liquids: Binary Mixtures

The phase behaviour of binary mixtures of ionic surfactants (1‐alkyl‐3‐imidazolium chloride, C_nmimCl with n=14, 16 and 18) and imidazolium‐based ionic liquids (1‐alkyl‐3‐methylimidazolium tetrachloroferrate, C_nmimFeCl₄, with n=2 and 4) over a broad temperature range and the complete range of compositions is described. By using many complementary methods including differential scanning calorimetry (DSC), polarised microscopy, small‐angle neutron and X‐ray scattering (SANS/SAXS), and surface tension, the ability of this model system to support self‐assembly is described quantitatively and this behaviour is compared with common water systems. The existence of micelles swollen by the solvent can be deduced from SANS experiments and represent a possible model for aggregates, which has barely been considered for ionic‐liquid systems until now, and can be ascribed to the rather low solvophobicity of the surfactants. Our investigation shows that, in general, C_nmimCl is a rather weak amphiphile in these ionic liquids. The amphiphilic strength increases systematically with the length of the alkyl chain, as seen from the phase behaviour, the critical micelle concentration, and also the level of definition of the aggregates formed.