Novel syn intramolecular pathway in base-catalyzed 1,2-elimination reactions of beta-acetoxy esters

As part of a comprehensive investigation of electronic effects on the stereochemistry of base-catalyzed 1,2-elimination reactions, we observed a new syn intramolecular pathway in the elimination of acetic acid from beta-acetoxy esters and thioesters. 1H and 2H NMR investigation of reactions using stereospecifically labeled tert-butyl (2R*,3R*)-3-acetoxy-2,3-2H2-butanoate (1) and its (2R*,3S*) diastereomer (2) shows that 23 +/- 2% syn elimination occurs. The elimination reactions were catalyzed with KOH or (CH3)4NOH in ethanol/water under rigorously non-ion-pairing conditions. By contrast, the more sterically hindered beta-trimethylacetoxy ester produces only 6 +/- 1% syn elimination. These data strongly support an intramolecular (Ei) syn path for elimination of acetic acid, most likely through the oxyanion produced by nucleophilic attack at the carbonyl carbon of the beta-acetoxy group. The analogous thioesters, S-tert-butyl (2R*,3R*)-3-acetoxy-2,3-2H2-butanethioate (3) and its (2R*,3S*) diastereomer (4), showed 18 +/- 2% syn elimination, whereas the beta-trimethylacetoxy substrate gave 5 +/- 1% syn elimination. The more acidic thioester substrates do not produce an increased amount of syn stereoselectivity even though their elimination reactions are at the E1cb interface.     

Does activation of the anti proton, rather than concertedness, determine the stereochemistry of base-catalyzed 1,2-elimination reactions? Anti stereospecificity in E1cB eliminations of β-3-trifluoromethylphenoxy esters, thioesters, and ketones

As part of a comprehensive investigation on the stereochemical aspects of base-catalyzed 1,2-elimination reactions, we have studied a set of acyclic carbonyl substrates that react by an irreversible E1cB mechanism with largely anti stereospecificity. (2)H NMR data show that these reactions using KOH in EtOH/H(2)O under non-ion-pairing conditions produce a minimum of 85-89% anti elimination on stereospecifically labeled tert-butyl (2R*,3R*)- and (2R*,3S*)-3-(3-trifluoromethylphenoxy)-2,3-(2)H(2)-butanoate, S-tert-butyl (2R*,3R*)- and (2R*,3S*)-3-(3-trifluoromethylphenoxy)-2,3-(2)H(2)-butanethioate, and the related ketones, (4R*,5R*)- and (4R*,5S*)-5-(3-trifluoromethylphenoxy)-4,5-(2)H(2)-3-hexanone. With both diastereomers of each substrate available, the KIEs can be calculated and the innate stereoselectivities determined. The elimination reactions of the β-3-trifluoromethylphenoxy substrates occur by E1cB mechanisms with diffusionally equilibrated enolate-anion intermediates. Thus, it is clear that anti elimination does not depend solely upon concerted E2 mechanisms. Negative hyperconjugation provides a satisfactory explanation for the anti stereospecificity exhibited by our carbonyl substrates, where the leaving group activates the anti proton, leading to the enolate intermediate. The activation of the anti proton by negative hyperconjugation may also play a role in the concerted pathways of E2 mechanisms. We have also measured the rates of the hydroxide-catalyzed elimination reactions of butanoate, thiobutanoate, and ketone substrates in EtOH/H(2)O, with β-tosyloxy, acetoxy, and 3-trifluoromethylphenoxy nucleofuges.     

Effect of buffer general acid-base catalysis on the stereoselectivity of ester and thioester H/D exchange in D2O

As part of a comprehensive investigation on the stereochemistry of base-catalyzed 1,2-elimination and H/D exchange reactions of carbonyl compounds, we have found that the stereoselectivity of H/D exchange of 3-hydroxybutyryl N-acetylcysteamine (3) in D(2)O is strongly influenced by the presence of buffers. This buffer effect is also operative with a simple acyclic ester, ethyl 3-methoxybutanoate (7). Buffers whose general-acid components are cyclic tertiary ammonium ions are particularly effective in changing the stereoselectivity. (2)H NMR analysis showed that without buffer, H/D exchange of 3 produces 81-82% of the 2R*, 3R* diastereomer of 2-deuterio 3 (the anti product). In the presence of 0.33 M 3-quinuclidinone buffer, only 44% of the 2R*, 3R* diastereomer was formed. With ester 7, the stereoselectivity went from 93-94% in DO(-)/D(2)O to 60% in the presence of buffer. Phosphate buffer, as well as others, also showed substantial effects. The results are put into the context of what is known about the mechanism of H/D exchange of esters and thioesters, and the relevance of the buffer effect on the mechanism of the enoyl-CoA hydratase reaction is discussed. It is likely that hydrogen bonding in the enolate-buffer acid encounter complex is an important stereochemical determinant in producing a greater amount of the 2R*, 3S* diastereomer (the syn product). Studies that involve the protonation of enolate anions in D(2)O need to include the buffer general acid in any understanding of the stereoselectivity.     

Combinatorial solution-phase synthesis of alkyl (1S*,2S*,3R*,5R*,6R*)-1-alkyl-3-aryl-6-benzoylamino-1-hydroxy-7- oxo-5-phenylhexahydropyrazolo[1,2-a]pyrazole-2-carboxylates

Combinatorial solution-phase cycloadditions of (1Z,4R*,5R*)-4-benzoylamino-5-phenylpyrazolidin-3-on-1-azomethine imines 3 to beta-keto esters 4 afforded a library of 26 bicyclic pyrazolidinones 5 in 6-89% yields and in 14-100% de. All products were isolated in >90% purity according to 1H NMR, and 25 of them were analytically pure. The structures of cycloadducts were confirmed by NMR and X-ray diffraction. Most of the products were isolated as mixtures of the major (1S*,2S*,3R*,5R*,6R*)-epimers 5 and the minor (1R*,2S*,3R*,5R*,6R*)-epimers 6. Epimerization of cycloadducts 5/6 at the anomeric position 1 in solution was confirmed by 1H NMR.     

Total synthesis of nor-1,6-germacradien-5-ols

The first total synthesis of (+/-)-nor-1,6-germacradien-5-ols is described. The synthetic route involves the RCM methodology for the ring formation and a selective 1,2 addition of MeLi to cyclodecenone. By altering the order of the last synthetic steps, TBSO-protected (+/-)-(1Z,6E)-nor-1,6-germacradien-5-ols (+/-)-(5S*,8R*)-16 and -(+/-)-(5S*,8S*)-16 were obtained. The synthetic strategy via cyclodecenone offers the possibility of preparing different analogues of the title compounds through addition of other nucleophiles. Moreover, nor-germacrene D could be accessed from the target molecule by methylenation of its carbonyl moiety. (+/-)-nor-1,6-Germacradien-5-ol [(+/-)-(1E,5S*,6E,8S*)-2] was synthesized in eight steps from isovaleric acid. The 10-membered ring was formed by RCM, and the tertiary alcohol moiety was introduced in the last step via a highly diastereoselective addition of MeLi to (+/-)-(1E,6E)-1,6-cyclodecen-5-one (+/-)-E,E-5. Addition of MeLi to cyclodecenone (+/-)-Z,E-5 also occurred with complete selectivity to provide (+/-)-(1Z,5S*,6E,8S*)-2. A slightly different synthetic pathway was also explored, in which the order of the final synthetic steps was switched: the enone formation and the addition of MeLi were conducted prior to the cyclization. When the hydroxy group was protected as a TBS ether, the newly formed olefin had exclusively Z configuration. Thus, TBSO-protected (+/-)-(1Z,6E)-nor-1,6-germacradien-5-ols (+/-)-16 were obtained as a 1:1 (5S*,8S*)/(5R*,8S*) mixture. The NMR spectra of these two diastereomers confirmed the relative stereochemistry of natural (-)-1,6-germacradien-5-ol (1) at C5 and C8.     

Stereoselective preparation of six diastereomeric quatercyclopropanes from bicyclopropylidene and some derivatives

Diastereomeric meso- and d,l-bis(bicyclopropylidenyl) (5) were obtained upon oxidation with oxygen of a higher-order cuprate generated from lithiobicyclopropylidene (4) in 50 and 31 % yield, respectively. Their perdeuterated analogues meso-[D(14)]- and d,l-[D(14)]-5 were obtained along the same route from perdeuterated bicyclopropylidene [D(8)]-3 (synthesized in six steps in 7.4 % overall yield from [D(8)]-THF) in 20.5 % yield each. Dehalogenative coupling of 1,1-dibromo-2-cyclopropylcyclopropane (6) gave a mixture of all possible stereoisomers of 1,5-dicyclopropylbicyclopropylidene 16 in 69 % yield, from which (Z)-cis-16 was separated by preparative gas chromatography (26 % yield). The crystal structure of meso-5 looks like a superposition of the crystal structures of two outer bicyclopropylidene units (3) and one inner s-trans-bicyclopropyl unit, whereas the two outer cyclopropyl moieties adopt a gauche orientation with respect to the cyclopropane rings at the inner bicyclopropylidene units in (Z)-cis-16. Birch reduction with lithium in liquid ammonia of meso-5 and d,l-5 gave two pairs of diastereomeric quatercyclopropanes trans,trans-(R*,S*,R*, S*)-17/cis,trans-(R*,S*,R*,R*)-18 and trans,trans-(R*,S*,S*,R*)-19/cis,trans-(R*,S*,S*,S*)-20 in 97 and 76 % yield, respectively, in a ratio 9:1 for every pair. The latter diastereomer was also obtained as the sole product by Birch reduction of (Z)-cis-16 in 96 % yield. Under the same conditions, tetradecadeuterio analogues trans,trans-[D(14)]-(R*,S*,R*,S*)-17/cis,trans-[D(14)]-(R*, S*,R*,R*)-18 (8:1) and trans,trans-[D(14)]-(R*,S*,S*,R*)-19/cis,trans-[D(14)]-(R*,S*,S*,S*)-20 (12:1) were prepared from meso-[D(14)]-5 and d,l-[D(14)]-5 in 37 and 63 % yield, respectively. Reduction of meso-5 with diimine gave the cis,cis-quatercyclopropane (S*,S*,R*,R*)-21 as the main product (58 % yield) along with the cis,trans-diastereomer (S*,S*,R*,S*)-18 (29 % yield). Thus, five of the six possible diastereomeric quatercyclopropanes were obtained from meso-5, d,l-5, and (Z)-cis-16. The X-ray crystal structure analyses of trans,trans-(R*,S*,R*,S*)-17 and cis,cis-(S*,S*,R*,R*)-21 revealed for the both an unusual conformation in which the central bicyclopropyl unit adopts an s-trans-(antiperiplanar) orientation with phi=180.0 degrees , and the two terminal bicyclopropyl moieties adopt a synclinal conformation with phi=49.8 and 72.0 degrees , respectively. In solution the vicinal coupling constants (3)J(H,H) in trans,trans-(R*,S*,R*,S*)-[D(14)]-17, trans,trans-(R*,S*,S*,R*)-[D(14)]-19, trans,cis-(R*,S*,R*,R*)-[D(14)]-18 and trans,cis-(R*,S*,S*,S*)-[D(14)]-20 were found to be 4.1, 4.7, 5.9 and 5.9 Hz, respectively. This indicates a predominance of the all-gauche conformer in (R*,S*,R*,S*)-17 and a decreasing fraction of it in this sequence of the other diastereomers.     

Synthesis of (+/-)-leucomalure [(3Z,6R*,7S*,9R*,10S*)-cis-6,7-cis-9,10-diepoxy-3-henicosene], the major components of the female sex pheromone of the satin moth

The racemate of leucomalure [(3Z,6R*,7S*,9R*,10S*)-cis-6,7-cis-9,10-diepoxy-3-henicosene (1)] and its (3Z,6R*,7S*,9S*,10R*)-isomer were synthesized via acetylenic intermediates in an unambiguous manner.     

A new route to the synthesis of (E)- and (Z)-2-alkene-4-ynoates and nitriles from vic-iiodo-(E)-alkenes catalyzed by Pd(0) nanoparticles in water

An efficient procedure for the stereoselective synthesis of (E)- and (Z)-2-alkene-4-ynoates and -nitriles by a simple reaction of vic-diiodo-(E)-alkenes with acrylic esters and nitriles catalyzed by in situ prepared Pd(0) nanoparticles in water has been developed. Addition of acrylic esters leads to (E)-isomers exclusively, whereas (Z)-isomers are obtained in high stereoselectivity from reactions of acrylonitrile. The aqueous slurry of Pd nanoparticles is recycled. A probable mechanism has been suggested.     

Highly Oxygenated Monoterpenes from Eupatorium fortunei

A pair of epimers of highly-oxygenated monoterpenes were isolated from the traditional Chinese medicine Eupatorium fortunei. Their structures were elucidated on the basis of the spectral analysis as （1R＊, 2S＊, 3R＊, 4R＊, 6S＊）-1, 2, 3, 6-tetrehydroxy-p-menthane （1） and （1S＊, 2S＊, 3S＊, 4R＊, 6R＊）-1, 2, 3, 6-tetrehydroxy-p-menthane （2）.     

Efficient synthesis and hydrolysis of cyclic oxalate esters of glycols

Based on the mechanism postulated for the formation of the cyclic carbonates 3 in the reactions of glycols 1 with oxalyl chloride in the presence of triethylamine, we present here three efficient syntheses of the cyclic oxalates 2 of various glycols 1 by controlling the formation of 3: replacement of the base by pyridine markedly diminishes yields of 3 in all reactions, realizing dramatic reversals of the product ratios in the reactions with the (R*,R*)-compounds 1g-i,q,r and pinacol (1k); although considerable amounts of the oxalate polymers are formed in the reactions with some (R*,S*)-glycols, this drawback can be removed by the use of 2,4,6-collidine instead of pyridine; 1,1'-oxalyldiimidazole is useful for the synthesis of two selected cyclic oxalates 2e,f. The cyclic oxalates 2 other than trisubstituted and tetrasubstituted ones were found to be very reactive: kinetic studies on the hydrolysis of 1,4-dioxane-2,3-dione (2a) as well as its mono- and some selected 5,6-disubstituted derivatives 2 have revealed that they undergo hydrolysis 260-1500 times more rapidly than diethyl oxalate (12) in acetate buffer-acetonitrile (pH 5.69) at 25 degrees C. Although the cyclic oxalate 21 from cis-1,2-cyclopentanediol (11) was 1.5 times more reactive than 2a, it has been shown with other substrates that increasing number of the alkyl substituents decreases the rate of hydrolysis. On the contrary, the phenyl group was found to have somewhat accelerative effect.     

C-O bond cleavage of benzophenone substituted by 4-CH2OR (R = C6H5 and CH3) with stepwise two-photon excitation

The C-O bond cleavage from benzophenone substituted with 4-CH2OR (p-BPCH2OR, 1-3), such as p-phenoxymethylbenzophenone (1, R= C6H5) and p-methoxymethylbenzophenone (2, R= CH3), occurred by a stepwise two-photon excitation during two-color, two-laser flash photolysis. On the other hand, no C-O bond cleavage occurred from p-hydroxymethylbenzophenone (3, R = H). The first 355-nm laser excitation of 1-3 generates p-BPCH2OR in the lowest triplet excited state (T1) which has an absorption at 532 nm. When p-BPCH2OR(T1) is excited with the second 532-nm laser to p-BPCH2OR in the higher triplet excited state (T(n)), the C-O bond cleavage occurred within the laser flash duration of 5 ns. The quantum yields of the C-O bond cleavage during the second 532-nm laser irradiation were found to be 0.015 +/- 0.007 and 0.007 +/- 0.003 for 1 and 2, respectively. Although these values are low, the diminishing 1(T1) or 2(T1) was found to convert, in almost 100% yield, to phenoxyl (C6H5O*) and p-benzoylbenzyl (BPCH2*) radicals or methoxyl (CH3O*) and BPCH2* radicals, respectively. The T(n) excitation energy, the energy barrier along the potential surface between the T(n) states and product radicals, and delocalization of the T(n) state molecular orbital including BP and CH2OR (R = C6H5, CH3, H) moieties are important factors for the occurrence of the C-O bond cleavage. It is found that the C-O bond cleavage and production of free radicals, such as BPCH2*, C6H5O*, and CH3O*, can be performed by a stepwise two-photon excitation. The present study is an example in which the chemical reactions can be selectively initiated from the T(n) state but not from the S1 and T1 states.     

Photolyse stéréosélective des [α-tétrahydropyrannyloxy] -2 tétrahydropyrones-3

The photochemical irradiation of the 2-[sα-tetrahydropyrannyl-oxy]-3-tetrahydropyrones (3) gives the -3-tetrahydropyrone (6)and the α-valerolactone (7). the structures (S*, R*) or (S*, S*) which were determined by mmr and by comparison with the 2-[α-tetrahydropyrannyloxy]-2tetrahydropyrannes (5) (S*, R*) and (S*, S*) influence the rate of the photolysis     

A convergent approach to the marine natural product eleutherobin: synthesis of key intermediates and attempts to produce the basic skeleton

Synthesis of (1R,5R,6R)-2-(6-hydroxymethyl-5-isopropyl-2-methylcyclohex-2-enyl)-N- methoxy-N-methylacetamide 8 from R-(-)-phellandrene in six steps, and (3aR*,4S*,6R*,6aS*)- (6-hydroxymethyl-4-methoxy-2,2,6-trimethyltetrahydrofuro[3,4-d][1,3]dioxol- 4-yl)acetic acid methyl ester 17 from tetrabromoacetone and 2-methoxy-5-methylfuran in six steps, provided two key fragments which have been combined to produce intermediates for attempted construction of the basic skeleton of eleutherobin.     

Kinetic separation methodology for the stereoselective synthesis of (E)- and (Z)-alpha-fluoro-alpha,beta-unsaturated esters via the palladium-catalyzed carboalkoxylation of 1-bromo-1-fluoroalkenes

[reaction: see text] Methodology for the stereoselective preparation of both (E)- and (Z)-alpha-fluoro-alpha,beta-unsaturated esters is described. 1-Bromo-1-fluoroalkenes (E/Z approximate 1:1) can be isomerized to high E/Z ratio mixtures, which participate in palladium-catalyzed carboalkoxylation and lead to (Z)-alpha-fluoro-alpha,beta-unsaturated esters in high stereoselectivity. The same starting material can also be kinetically reduced to get an E/Z ratio of 0:100; similar carboalkoxylation reaction at 70 degrees C affords (E)-alpha-fluoro-alpha,beta-unsaturated esters stereospecifically.     

Stereoselective synthesis of ambiphilic alkenes via regioselective methylation of α-trifluoromethanesulfonyl carbonyl compounds with trimethylsilyldiazomethane

α-Trifluoromethanesulfonyl esters, ketones and amides are C-H acids capable of reacting with trimethylsilyldiazomethane to afford the corresponding ambiphilic alkenes. While esters were found to be non-selective, ketones were highly regioselective for O-methylation and displayed variable E/Z stereoselectivity. Amides were observed to be both highly regio- and stereoselective, affording O-methylation with exclusive formation of the Z-alkene.     

Attachment of carbonyl functionalities onto olefins via copper-promoted radical reaction of dichloromethylcyanides

Chemo- and regioselective protocols for attachment of various carbonyl functionalities onto unactivated olefins have been developed. Atom transfer radical reactions of Cl₃CCN, Cl₂C(R)CN, and Cl₂C(CN)₂ were all promoted efficiently by a catalytic amount of CuCl and 1,1′-bis(diphenylphosphino)ferrocene to introduce chloromethylcyanide and chloride units to the C–C double bonds. Conversion of the chloromethylcyanide to the carbonyl functionalities (e.g., aldehydes, ketones and esters), and subsequent double bond reconstruction through elimination of HCl resulted in selective formation of the carbonyl-conjugated E-olefins.     

Influence of Michael acceptor stereochemistry on intramolecular Morita-Baylis-Hillman reactions

[reaction: see text] A study of the effect of Michael acceptor stereochemistry on the efficiency of intramolecular Morita-Baylis-Hillman (MBH) reactions has been performed. The reactions were catalyzed by a phosphine, and the reaction substrates studied were enones containing a pendant aldehyde moiety attached at the beta-position of the alkene group. In all cases examined with PPh3 as the catalyst, cyclization substrates possessing (Z)-alkene stereochemistry afforded a much higher yield of the desired product than did the E isomeric substrates under identical reaction conditions. This was also true when a polymer-supported phosphine catalyst was used. While both alkene isomers afforded the same product, in parallel reactions, the Z isomer afforded 2.5-8.5 times higher yield than did the corresponding E isomer. It is proposed that steric effects are a possible source of this dramatic difference in reactivity. Substrates where the beta-substituent is cis to the electron-withdrawing substituent are relatively more accessible to react with the nucleophile catalyst than are their trans counterparts. These findings are expected to be useful in the design of synthetic intermediates, as intramolecular MBH reactions are being increasingly used in the preparation of complex synthetic targets.     

Oxidation of cis- and trans-3,5-di-tert-butyl-3,5-diphenyl-1,2,4-trithiolanes: isolation and properties of the 1-oxides and the 1,2-dioxides

Oxidation of trans-3,5-di-tert-butyl-3,5-diphenyl-1,2,4-trithiolane with dimethyldioxirane (DMD) or m-chloroperbenzoic acid (MCPBA) gave two stereoisomeric (1S*,3S*,5S*)- and (1R*,3S*,5S*)-1-oxides (16 and 17, respectively). Oxidation of 16 with DMD gave the (1S*,2R*,3S*,5S*)-1,2-dioxide (18) and the 1,1-dioxide 19, and that of 17 yielded the (1R*,2R*,3S*,5S*)-1,2-dioxide (20) mainly along with 18 and 19. The structures of the 1,2-dioxides 18 and 20 were determined by X-ray crystallography. 1,2-Dioxides 18 and 20 isomerized to each other in solution, and the equilibrium constant K (20/18) is 19 in CDCl(3) at 295 K. The kinetic study suggested a biradical mechanism for the isomerization. Isomerization of 16 and 17 to cis-3,5-di-tert-butyl-1,2,4-trithiolane 1-oxides by treatment with Me(3)O(+)BF(4)(-) is also described.     

Copper-Catalyzed Enantioselective Synthesis of α-Hydroxyamine Using Monodentate Phosphoramidites

Development of new methods for the introduction of a nitrogen atom to a carbonyl group is still the most important synthetic target. Cu-catalyzed addition of organozinc reagents to α,β-unsaturated carbonyl compounds has been the subject of intensive investigation.[1] Moreover, trapping of the intermediate Zn-enolates has been achieved using nitrosobenzene. To demonstrate the feasibility of developing enantioselective variants of these tandem C-C bond formations,α,β-unsaturated substrates a～d was subjected to standard reaction conditions using Feringa's (L1*, L2*) and our own phosphoramidite ligands (L3*, L4*). In this reaction, medium to high levels of enantioselectivities were observed.     

由有机钟盐简便合成不饱和醛、酮、酰胺以及有关天然产物(英文)

本文报道有机鉮盐和各种不同的醛在固-液相转移条件下,以碳酸钾为碱,简便合成共轭不饱和醛、共轭不饱和酮以及共轭不饱和酰胺。其反应通式如下:(?)n=O,1;m=0,1 and(?)X=CHO,COCH_3,CONR~1R_2当m=0时,产物几乎全部是2E 或2E,4E 产物,当m=1时,2E,4E 或2E,4E,6E 产物为主,Z 构型产物在催化量碘作用下易异构化成 E 构型产物。以此合成方法,还合成了一些具有生物活性的天然产物。该合成方法操作简便,反应条件温和,产物高度立体选择性,产率优良,这为多烯醛,多烯酮,多烯酰胺以及有关天然产物的合成提供了实用途径。