Near-infrared spectroscopy quantitative determination of Pefloxacin mesylate concentration in pharmaceuticals by using partial least squares and principal component regression multivariate calibration

Pefloxacin mesylate, a broad-spectrum antibacterial fluoroquinolone, has been widely used in clinical practice. Therefore, it is very important to detect the concentration of Pefloxacin mesylate. In this research, the near-infrared spectroscopy (NIRS) has been applied to quantitatively analyze on 108 injection samples, which was divided into a calibration set containing 89 samples and a prediction set containing 19 samples randomly. In order to get a satisfying result, partial least square (PLS) regression and principal components regression (PCR) have been utilized to establish quantitative models. Also, the process of establishing the models, parameters of the models, and prediction results were discussed in detail. In the PLS regression, the values of the coefficient of determination (R²) and root mean square error of cross-validation (RMSECV) of PLS regression are 0.9263 and 0.00119, respectively. For comparison, though applying PCR method to get the values of R² and RMSECV we obtained are 0.9685 and 0.00108, respectively. And the values of the standard error of prediction set (SEP) of PLS and PCR models are 0.001480 and 0.001140. The result of the prediction set suggests that these two quantitative analysis models have excellent generalization ability and prediction precision. However, for this PFLX injection samples, the PCR quantitative analysis model achieved more accurate results than the PLS model. The experimental results showed that NIRS together with PCR method provide rapid and accurate quantitative analysis of PFLX injection samples. Moreover, this study supplied technical support for the further analysis of other injection samples in pharmaceuticals.     

应用遗传算法和PLS的近红外光谱预测玉米中淀粉含量的研究

以普通玉米籽粒为试验材料,在应用遗传算法结合偏最小二乘回归法对近红外光谱数据进行特征波长选择的基础上,应用偏最小二乘回归法建立了特征波长测定玉米籽粒中淀粉含量的校正模型．试验结果表明,基于11个特征波长所建立的校正模型,其校正误差（RMSEC）、交叉检验误差（RMSECV）和预测误差（RMSEP）分别为0.30％、0.35％和0.27％,校正数据集和独立的检验数据集的预测值与实际测定值之间的相关系数分别达到0.9279和0.9390,与全光谱数据所建立的预测模型相比,在预测精度上均有所改善,表明应用遗传算法和PLS进行光谱特征选择,能获得更简单和更好的模型,为玉米籽粒中淀粉含量的近红外测定和红外光谱数据的处理提供了新的方法与途径．     

Simultaneous determination of total polyphenols and caffeine contents of green tea by near-infrared reflectance spectroscopy

This paper indicates the possibility to use near infrared (NIR) spectroscopy as a rapid method to predict quantitatively the content of caffeine and total polyphenols in green tea. A partial least squares (PLS) algorithm is used to perform the calibration. To decide upon the number of PLS factors included in the PLS model, the model is chosen according to the lowest root mean square error of cross-validation (RMSECV) in training. The correlation coefficient R between the NIR predicted and the reference results for the test set is used as an evaluation parameter for the models. The result showed that the correlation coefficients of the prediction models were R = 0.9688 for the caffeine and R = 0.9299 for total polyphenols. The study demonstrates that NIR spectroscopy technology with multivariate calibration analysis can be successfully applied as a rapid method to determine the valid ingredients of tea to control industrial processes.     

Feasibility study on qualitative and quantitative analysis in tea by near infrared spectroscopy with multivariate calibration

This study attempted the feasibility to use near infrared (NIR) spectroscopy as a rapid analysis method to qualitative and quantitative assessment of the tea quality. NIR spectroscopy with soft independent modeling of class analogy (SIMCA) method was proposed to identify rapidly tea varieties in this paper. In the experiment, four tea varieties from Longjing, Biluochun, Qihong and Tieguanyin were studied. The better results were achieved following as: the identification rate equals to 90% only for Longjing in training set; 80% only for Biluochun in test set; while, the remaining equal to 100%. A partial least squares (PLS) algorithm is used to predict the content of caffeine and total polyphenols in tea. The models are calibrated by cross-validation and the best number of PLS factors was achieved according to the lowest root mean square error of cross-validation (RMSECV). The correlation coefficients and the root mean square error of prediction (RMSEP) in the test set were used as the evaluation parameters for the models as follows: R = 0.9688, RMSEP = 0.0836% for the caffeine; R = 0.9299, RMSEP = 1.1138% for total polyphenols. The overall results demonstrate that NIR spectroscopy with multivariate calibration could be successfully applied as a rapid method not only to identify the tea varieties but also to determine simultaneously some chemical compositions contents in tea.     

Determination of Chlorpyrifos Residue by Near-Infrared Spectroscopy in White Radish Based on Interval Partial Least Square (iPLS) Model

Abstract

This article presents a multivariate method of rapidly determining chlopyrifos residue in white radish, based on near-infrared spectroscopy and partial least squares (PLS) regression. Interval PLS (iPLS) was utilized to select the optimum wave number range. The number of PLS components and the number of intervals were optimized according to root mean square error of prediction (RMSEP) and correlation coefficient (R) in prediction set. The result showed that the iPLS model was more reliable than the full model and that near-infrared spectroscopy with iPLS algorithm could be used successfully to analyze chlorpyrifos residue in white radish.     

Evaluation of important fatty acid ratios in poultry feed lipids by ATR FTIR spectroscopy

A rapid, simple and reproducible single bounce attenuated total reflectance (SB-ATR) Fourier transform infrared (FTIR) spectroscopic method was developed for determination of the n − 6, n − 3 and ratio of n − 6:n − 3 polyunsaturated fatty acids (PUFAs) in poultry feed lipids using partial least squares (PLS) regression. Data for n − 6, n − 3 and ratio of n − 6:n − 3 was acquired by gas chromatography (GC) and used as a standard values for FTIR calibration. The best regression results were achieved using first derivatives of the 1475–650 cm⁻¹ spectral region for n − 6, n − 3 and ratio of n − 6:n − 3 with high regression coefficients (R²) of 0.999, 0.994 and 0.998, respectively and low RMSEP values of 1, 0.06 and 0.83, respectively. The results of the present study revealed that FTIR could be used for rapid and accurate determination of n − 6, n − 3 and ratio of n − 6:n − 3 PUFAs present in poultry feed lipids.     

近红外光谱法快速测定涂料固化剂中游离甲苯二异氰酸酯含量

用气相色谱分析值为参照,采用近红外透射光谱（NIR）技术采集相应样品的NIR光谱,研究了涂料固化剂中游离甲苯二异氰酸酯（TDI）含量的快速测定分析方法。 并从120个固化剂样品中挑选出109个代表性的样品建模,选择7320~7250 cm-1和8485~8370 cm-1波段区间,用偏最小二乘法(PLS)和完全交互验证方式建立TDI含量的预测模型。 结果表明,固化剂中游离甲苯二异氰酸酯含量和近红外光谱之间存在较好的相关性,其预测模型的校正集均方差（RMSEC）为0.0815,验证集均方差（RMSEP）为0.0715,模型性能良好。 近红外光谱法可快速准确测定游离甲苯二异氰酸酯（TDI）含量,用于固化剂样品快速分析。     

Determination of biodiesel content when blended with mineral diesel fuel using infrared spectroscopy and multivariate calibration

In this work, multivariable calibration models based on middle- and near-infrared spectroscopy were developed in order to determine the content of biodiesel in diesel fuel blends, considering the presence of raw vegetable oil. Soybean, castor and used frying oils and their corresponding esters were used to prepare the blends with conventional diesel. Results indicated that partial least squares (PLS) models based on MID or NIR infrared spectra were proven suitable as practical analytical methods for predicting biodiesel content in conventional diesel blends in the volume fraction range from 0% to 5%. PLS models were validated by independent prediction set and the RMSEPs were estimated as 0.25 and 0.18 (%, v/v). Linear correlations were observed for predicted vs. observed values plots with correlation coefficient (R) of 0.986 and 0.994 for the MID and NIR models, respectively. Additionally, principal component analysis (PCA) in the MID region 1700 to 1800 cm^− 1 was suitable for identifying raw vegetable oil contaminations and illegal blends of petrodiesel containing the raw vegetable oil instead of ester.     

An approach by using near-infrared diffuse reflectance spectroscopy and resin adsorption for the determination of copper, cobalt and nickel ions in dilute solution

Near-infrared spectroscopy (NIRS) has been proved to be a powerful analytical tool and used in various fields, it is seldom, however, used in the analysis of metal ions in solutions. A method for quantitative determination of metal ions in solution is developed by using resin adsorption and near-infrared diffuse reflectance spectroscopy (NIRDRS). The method makes use of the resin adsorption for gathering the analytes from a dilute solution, and then NIRDRS of the adsorbate is measured. Because both the information of the metal ions and their interaction with the functional group of resin can be reflected in the spectrum, quantitative determination is achieved by using multivariate calibration technique. Taking copper (Cu²⁺), cobalt (Co²⁺) and nickel (Ni²⁺) as the analyzing targets and D401 resin as the adsorbent, partial least squares (PLS) model is built from the NIRDRS of the adsorbates. The results show that the concentrations that can be quantitatively detected are as low as 1.00, 1.98 and 1.00 mg L⁻¹ for Cu²⁺, Co²⁺ and Ni²⁺, respectively, and the coexistent ions do not influence the determination.     

Rapid determination of pH in solid-state fermentation of wheat straw by FT-NIR spectroscopy and efficient wavelengths selection

In the work discussed in this paper we investigated the feasibility of determination of the pH of a fermented substrate in solid-state fermentation (SSF) of wheat straw. Fourier-transform near-infrared (FT-NIR) spectroscopy was combined with an appropriate multivariate method of analysis. A genetic algorithm and synergy interval partial least-squares (GA-siPLS) were used to select the efficient spectral subintervals and wavelengths by k-fold cross-validation during development of the model. The performance of the final model was evaluated by use of the root mean square error of cross-validation (RMSECV) and correlation coefficient (R (c)) for the calibration set, and verified by use of the root mean square error of prediction (RMSEP) and correlation coefficient (R (p)) for the validation set. The experimental results showed that the optimum GA-siPLS model was achieved by use of seven PLS factors, when four spectral subintervals were selected by siPLS and then 45 wavelength variables were chosen by use of the GA. The predicted precision of the best model obtained was: RMSECV = 0.0583, R (c) = 0.9878, RMSEP = 0.0779, and R (p) = 0.9779. Finally, the superior performance of the GA-siPLS model was demonstrated by comparison with four other PLS models. The overall results indicated that FT-NIR spectroscopy can be successfully used for measurement of pH in solid-state fermentation, and use of the GA-siPLS algorithm is the best means of calibration of the model.     

Feasibility study for the use of near infrared spectroscopy in the qualitative and quantitative analysis of green tea, Camellia sinensis (L.)

This paper indicates the possibility to use near infrared spectroscopy (NIR) combined with PLS as a rapid method to estimate the quality of green tea. NIR is used to build calibration models to predict the content of caffeine, epigallocatechin gallate (EGCG) and epicatechin (EC) and for the prediction of the total antioxidant capacity of green tea. For the determination of the total antioxidant capacity, the trolox equivalent antioxidant capacity (TEAC) method is used. Until now, the prediction of the antioxidant capacity as such by use of NIR has not been reported. For caffeine and TEAC, models are build for the whole green tea leaves and also for the ground leaves. For the polyphenols (EGCG and EC), only models for the whole leaves are investigated. A partial least squares (PLS) algorithm is used to perform the calibration. To decide upon the number of PLS factors included in the PLS model, the model with the lowest root mean square error of cross-validation (RMSECV) for the training set is chosen. The correlation coefficient (r) between the predicted and the reference results for the test set is used as an evaluation parameter for the models: for the TEAC results r=0.90 for the model with the whole leaves, r=0.86 for the model with the powdered leaves are obtained. The caffeine prediction model has a correlation coefficient r=0.96 for the whole leaves and r=0.93 for the ground leaves. The correlation coefficient for the EGCG and the EC content models are, respectively 0.83 and 0.44.     

Quantitative determination of acyclovir in plasma by near infrared spectroscopy

The aim of this study was to assess the feasibility of near infrared spectroscopy (NIRS) for analysis of acyclovir in plasma. This methodology was based on the direct measurement of the transmission spectra of liquid samples and a multivariate calibration model (partial least squares, PLS) to determine the acyclovir concentration in plasma sample. The PLS calibration set was built on using the spiked samples by mixing different amounts of acyclovir. Concentration of acyclovir in the plasma samples was calculated employing a 6-factors PLS calibration using the spectral information in the range of 6102-5450 cm^− 1. The root mean square errors of prediction (RMSEP) found was 1.21 for acyclovir. The developed PLS-NIRS procedure allows the determination of 120 samples/h does not require any sample pretreatment and avoids waste generation.     

Chemometric determination of arsenic and lead in untreated powdered red paprika by diffuse reflectance near-infrared spectroscopy

It has been evaluated the potential of near-infrared (NIR) diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) as a way for non-destructive measurement of trace elements at μg kg⁻¹ level in foods, with neither physical nor chemical pre-treatment. Predictive models were developed using partial least-square (PLS) multivariate approaches based on first-order derivative spectra. A critical comparison of two spectral pre-treatments, multiplicative signal correction (MSC) and standard normal variate (SNV) was also made. The PLS models built after using SNV provided the best prediction results for the determination of arsenic and lead in powdered red paprika samples. Relative root-mean-square error of prediction (RRMSEP) of 23% for both metals, arsenic and lead, were found in this study using 20 well characterized samples for calibration and 13 additional samples as validation set. Results derived from this study showed that NIR diffuse reflectance spectroscopy combined with the appropriate chemometric tools could be considered as an useful screening tool for a rapid determination of As and Pb at concentration level of the order of hundred μg kg⁻¹.     

Infrared spectroscopy and outer product analysis for quantification of fat, nitrogen, and moisture of cocoa powder

The combination of the near infrared (NIR) and Fourier-transform infrared (FTIR) absorbance spectra (1100-2500 nm and 4000-600 cm⁻¹) of 100 cocoa powder samples was used to build calibration models for the determination of the content of fat, nitrogen, and moisture. The samples that comprised the dataset had an average composition of 13.51% of fat, 3.77% nitrogen, and 3.98% moisture. The fat content ranged from 2.42 to 22.00%, the nitrogen from 0.88 to 4.48%, and moisture from 1.60 to 7.80%. For NIR, the relative root mean square error of cross-validation (RMSECV) was 7.0% (R² = 0.96) for fat, 1.7% (R² = 0.98) for nitrogen, and 5.2% (R² = 0.94) for moisture. For FTIR, the relative RMSECV was 10.4% (R² = 0.94) for fat and 3.9% (R² = 0.95) for nitrogen. However, for moisture, it was not possible to build a calibration model with suitable predictability. The combination of the NIR and FTIR domains (data fusion) by outer product analysis PLS1 allowed to predict these parameters and to characterise frequencies in one domain based on the information of the other domain. This work allows to conclude that the second derivative of NIR is the recommended procedure to quantify fat, nitrogen, and moisture content in cocoa powders by infrared spectroscopy.     

Development of Near-Infrared Reflectance Spectroscopy Models for Quantitative Determination of Water-Soluble Carbohydrate Content in Wheat Stem and Glume

Water-soluble carbohydrate (WSC) reserved in stem is an important agronomic trait for crop improvement. The intact samples and pieces of chipped samples were employed to determine WSC content by near-infrared reflectance spectroscopy (NIRS). Three NIRS models were developed to predict WSC content in wheat stem lower internode, upmost internode, and wheat glume, respectively. Moreover, a mixed model was developed for WSC quantitative analysis in the mixed sample of the three wheat organs. Statistics analysis indicated that the four models showed a high determination coefficient (R² ≥ 0.97) and ratio of standard deviation to RMSECV (RPD ≥ 5.99). The NIRS models would allow rapid and high throughout assessments and selections of WSC contents in wheat genetics and breeding programs.     

短波近红外光谱法对蛇床子SFE萃取产物的定量分析

利用中药蛇床子CO2超临界萃取(SFE)的萃取物的短波近红外漫反射光谱(800～1100 nm),以HPLC分析值作参比值,采用化学计量学中的偏最小二乘法(PLS)建立短波近红外漫反射光谱与蛇床子SFE萃取物中主要成分蛇床子素和欧前胡素间定量分析数学模型.实现了快速、无损的测定双组分中药的有效成分.讨论了光谱的预处理方法和主成分数对PLS定量预测蛇床子萃取物中蛇床子素和欧前胡素含量能力的影响,并对预测集样品进行预测.     

Quantitative Analysis of Catalpol in Chinese Patent Medicine Lixin Pill by Near-infrared Diffuse Reflectance Spectroscopy

Lixin pill is a typical Chinese patent medicine with anti-rheumatic heart disease activity that has been widely used in clinical practice. Therefore it is very important to detect the concentration of catalpol, as the main component of the active ingredient. Near-infrared reflectance（NIR） spectroscopy was used to study the content of catalpol in the unprocessed Chinese patent medicine of Lixin pills. NIR is applied to quantitatively analyze 77 sam- ples, which were randomly divided into a calibration set containing 61 samples and a prediction set containing 16 samples. To get a satisfying result, partial least squares（PLS） regression was utilized to establish quantitative models. In PLS regression, the values of coefficient of determination（R2） and root mean square error of cross-validation （RMSECV） of PLS regression are 0.9419 and 0.0216, respectively. The process of establishing model, parameters of model, and prediction results were also discussed in detail（root mean square error of prediction is 0.0164）. The over- all results show that NIR spectroscopy can be efficiently utilized for the rapid and accurate analysis of routine chemical compositions in the Chinese patent medicine of Lixin pills. The prediction set suggests that this quantitative analysis model has excellent generalization ability and prediction precision. Accordingly, the result can provide tech- nical support for the further analysis of catalpol in unprocessed Lixin pill. Moreover, this study supplied technical support for the further analysis of other Chinese patent medicine samples.     

Determination of α-linolenic acid and linoleic acid in edible oils using near-infrared spectroscopy improved by wavelet transform and uninformative variable elimination

This paper proposes an analytical method for simultaneous near-infrared (NIR) spectrometric determination of α-linolenic and linoleic acid in eight types of edible vegetable oils and their blending. For this purpose, a combination of spectral wavelength selection by wavelet transform (WT) and elimination of uninformative variables (UVE) was proposed to obtain simple partial least square (PLS) models based on a small subset of wavelengths. WT was firstly utilized to compress full NIR spectra which contain 1413 redundant variables, and 42 wavelet approximate coefficients were obtained. UVE was then carried out to further select the informative variables. Finally, 27 and 19 wavelet approximate coefficients were selected by UVE for α-linolenic and linoleic acid, respectively. The selected variables were used as inputs of PLS model. Due to original spectra were compressed, and irrelevant variables were eliminated, more parsimonious and efficient model based on WT-UVE was obtained compared with the conventional PLS model with full spectra data. The coefficient of determination (r²) and root mean square error prediction set (RMSEP) for prediction set were 0.9345 and 0.0123 for α-linolenic acid prediction by WT-UVE-PLS model. The r² and RMSEP were 0.9054, 0.0437 for linoleic acid prediction. The good performance showed a potential application using WT-UVE to select NIR effective variables. WT-UVE can both speed up the calculation and improve the predicted results. The results indicated that it was feasible to fast determine α-linolenic acid and linoleic acid content in edible oils using NIR spectroscopy.     

Use of near-infrared reflectance spectroscopy in predicting nitrogen,phosphorus and calcium contents in heterogeneous woody plant species

Near-infrared reflectance spectroscopy was applied to determine nitrogen (N), phosphorus (P) and calcium (Ca) content in leaf samples of 18 woody species. A total of 183 samples from mountain, riparian and dry areas from the Central–Western Iberian Peninsula were collected for this purpose. The wide intervals of variation observed in nutrient concentrations (6.6–45.0 g kg^–1 for N, 0.24–2.97 g kg^–1 for P, and 1.00–20.06 g kg^–1 for Ca) were due to the great heterogeneity of the samples. To develop calibration equations, multiple linear regression, and partial least-squares regression (PLSR) were used. In both cases, three mathematical transformations of the data were applied: log1/R and first and second derivatives. The best calibration statistics were obtained using PLSR and derivative transformations (second derivative for N and first derivative for P and Ca). The following coefficients of multiple determination (R²) and standard errors of cross validation were obtained: 0.99 and 0.93 for N, 0.94 and 0.15 for P, and 0.95 and 0.88 for Ca. In the external validation the standard errors of prediction obtained were 0.76 (N), 0.11 (P) and 0.60 (Ca).     

Determination of Iridoids in Gentiana rigescens by Infrared Spectroscopy and Multivariate Analysis

Gentiana rigescens is a famous herbal medicine in China for treatment of convulsion, rheumatism, and jaundice. Here, the infrared determination of gentiopicroside, swertiamarin, sweroside, and loganic acid in G. rigescens from different areas and varieties was presented for the first time. Reference information for the iridoids were obtained by high-performance liquid chromatography. Partial least squares was used to characterize the relationship between spectra matrix and concentration vector for the determination of the analytes. For determination of gentiopicroside, the appropriate performance of partial least squares model was acquired with coefficient of determination of calibration and coefficient of determination of prediction values of 0.965 and 0.868. The root mean square error of estimation (RMSEE), root mean square error of cross validation (RMSECV), root mean square error of prediction (RMSEP), and residual predictive deviation (RPD) values were 2.612, 5.292, 5.239?mg g^?1, and 2.701, respectively, based on the first derivative and multiplicative scatter correction. For determination of the total iridoids, the best results were obtained using the coefficient of determination of calibration and coefficient of determination of prediction of 0.943 and 0.834, RMSEE, RMSECV, RMSEP and RPD of 3.896, 7.536, 6.543?mg g^?1 and 2.438, respectively, based on the first derivative. Both models were reliable and robust. The results demonstrated that infrared spectroscopy provided a rapid, low-cost tool to monitor the quality of G. rigescens by the determination of the iridoids.