Studies on lactams—XXVII : Synthesis and reactions of 4-carboxy-β-lactam

Reaction of phenoxyacetyl chloride with α-carbomethoxybenzylidine-p-anisidine 1 in presence of triethylamine gave a mixture of E and Z 1-(p-anisyl)-4-carbomethoxy-3-phenoxy-4-phenyl-2-azetidinones 2 which upon hydrolysis with lithium iodide in refluxing pyridine produced the corresponding acids in the ratio of 3:1. A series of substituted β-lactams were prepared by transforming the carboxy group of the E-isomer into the acid chloride, amide, cyano, acid azide, isocyanate, urethane, urea, hydroxymethyl, aldehyde, acetoxy and methoxy groups.     

The suitability of various calcium electrodes based on metal salts of di-(n-octylphenyl)phosphoric acid and some derivatives for the measurement of calcium in sea water

The calcium salts of di-(n-octylphenyl)-phosphoric acid, di-(p-n-octyl-o-nitrophenyl)-phosphoric acid and di-(p-n-octyl-o-bromophenyl)-phosphoric acid have been investigated as calcium sensors in membrane electrodes. The electrodes have been used for potentiometric titrations of calcium in sea water. The effect of varying the membrane solvent and the chelate metal has been studied.     

Ceric ammonium nitrate on silica gel for efficient and selective removal of trityl and silyl groups

Silica gel-supported ceric ammonium nitrate (CAN-SiO2) was found effective for rapid and selective cleavage of trityl (Tr), monomethoxytrityl (MMTr), and dimethoxytrityl (DMTr) groups from protected nucleosides and nucleotides under mild conditions. Efficiency of deprotections depended upon the stability of the resultant carbocationic species: DMTr+ > MMTr+ > Tr+. Use of a catalytic amount of this solid-supported reagent can also efficiently and selectively remove the tert-butyldimethylsilyl or the triisopropylsilyl group from a primary hydroxyl functionality in di- or trisilyl ethers of ribonucleosides. A comparative study of deprotection reactions by utilization of CAN alone or CAN-SiO2 indicates a remarkable increase in the rate of the reactions involving a solid support. The mechanism of electron-transfer processes is proposed for the use of CAN-SiO2 in the removal of these protective groups from organic molecules.     

Experimental evidence and bond characterization of a cyclopropenylgermylene

The reduction of p-anisyl(1,2,3-tri-tert-butylcycloprop-2-en-1-yl)dichlorogermane (1) with potassium in the presence of an excess of tert-butyldimethylsilane in benzene under reflux gave p-anisyl(tert-butyldimethylsilyl)(1,2,3-tri-tert-butylcycloprop-2-en-1-yl)germane (4) in 15% yield. The formation of 4 indicates that p-anisyl(1,2,3-tri-tert-butylcycloprop-2-en-1-yl)germylene (2), which is the first example of a (cycloprop-2-en-1-yl)germylene derivative, was generated and trapped by the hydrosilane. The DFT calculations revealed that the cis-2-p-anisyl-1,3,4-tri-tert-butyl-2-germabicyclo[1.1.0]butane-2,4-diyl structure cis-5 is 8.0 kJ/mol more stable than cis-2. The NBO analysis revealed that cis-5 has a 2-germabicyclo[1.1.0]butane diradical character.     

Porphyrin N-Pincer Pd(II)-Complexes in Water: A Base-Free and Nature-Inspired Protocol for the Oxidative Self-Coupling of Potassium Aryltrifluoroborates in Open-Air

Metalloporphyrins (and porphyrins) are well known as pigments of life in nature, since representatives of this group include chlorophylls (Mg-porphyrins) and heme (Fe-porphyrins). Hence, the construction of chemistry based on these substances can be based on the imitation of biological systems. Inspired by nature, in this article we present the preparation of five different porphyrin, meso-tetraphenylporphyrin (TPP), meso-tetra(p-anisyl)porphyrin (TpAP), tetrasodium meso-tetra(p-sulfonatophenyl)porphyrin (TSTpSPP), meso-tetra(m-hydroxyphenyl)porphyrin (TmHPP), and meso-tetra(m-carboxyphenyl)porphyrin (TmCPP) as well as their N-pincer Pd(II)-complexes such as Pd(II)-meso-tetraphenylporphyrin (PdTPP), Pd(II)-meso-tetra(p-anisyl)porphyrin (PdTpAP), Pd(II)-tetrasodium meso-tetra(p-sulfonatophenyl)porphyrin (PdTSTpSPP), Pd(II)-meso-tetra(m-hydroxyphenyl)porphyrin (PdTmHPP), and Pd(II)-meso-tetra(m-carboxyphenyl)porphyrin (PdTmCPP). These porphyrin N-pincer Pd(II)-complexes were studied and found to be effective in the base-free self-coupling reactions of potassium aryltrifluoroborates (PATFBs) in water at ambient conditions. The catalysts and the products (symmetrical biaryls) were characterized using their spectral data. The high yields of the biaryls, the bio-mimicking conditions, good substrate feasibility, evading the use of base, easy preparation and handling of catalysts, and the application of aqueous media, all make this protocol very attractive from a sustainability and cost-effective standpoint.     

Synthesis and study of a polymer containing di- and triazenyl-p-phenylene groups

A polymer containing di- and triazenyl-p-phenylene groups in the main chain was synthesized for the first time. Doping of newly synthesized poly(triazene-1,3-diyl-p-phenylenes) and poly(triazene-1,3-diyl-pdiphenylenes) with perchloric acid is studied. The introduction of azophenylene groups in the chain of a polymer containing triazenylphenylene groups has almost no effect on electrical conductivity. The electrical conductivity of these polymers increases from 10^?9 to 0.8 S/m with increasing doping degree. The replacement of phenylene by diphenylene groups slightly reduces the electrical conductivity of the polymer doped with perchloric acid, while in the case of iodine doping, by contrast, the electrical conductivity slightly increases.     

Aniline–terephthalaldehyde resin p-toluenesulfonic acid (ATRT) salt as efficient mild polymeric solid acid catalyst

Aniline–terephthalaldehyde resin p-toluenesulfonic acid (ATRT) salt was easily prepared by the reaction of aniline with 1.25 equiv of terephthalaldehyde in the presence of 1.0 equiv of p-toluenesulfonic acid at 75 °C for 24 h in EtOH. ATRT efficiently catalyzed the tetrahydropyranylation of alcohols and deprotection of tetrahydropyranyl (THP), triethylsilyl (TES), and tert-butyldimethylsilyl (TBDMS) ethers. Deprotection of dodecyl THP ether and dodecyl TBDMS ether catalyzed by ATRT proceeded faster than those by pyridinium p-toluenesulfonate (PPTS). ATRT was reused without significant loss of activities.     

Reductive demercuration in deprotection of trityl thioethers, trityl amines, and trityl ethers.

A room-temperature deprotection method of trityl amines, -ethers, and -thioethers is presented, based on coupling of metal acid catalysis (HgX(2), with X(-) = Cl(-) or OAc(-)) and sodium borohydride reduction. The results of its application to monotritylated compounds (ethanethiol, ethanol, and piperidine) and to mono- and ditritylated 1,2-bifunctional compounds (mercaptoethanol, aminoethanethiol, and ethanolamine) are compared with those obtained with early methods based on the use of strong Br?nsted acids (pure TFA and MeCN solutions of HCl). Trityl thioethers of simple thiols and amino and hydroxy thiols are promptly cleaved by reductive detritylation, and one-pot procedures can be employed to produce free thiols. In contrast, dilution with water of these same compounds in solutions of strong Br?nsted acids leaves them unaffected. O-Tr and N-Tr bonds are broken by this latter treatment. However, trityl ethers are rapidly cleaved by even dilute HCl solutions, while cleaving of trityl amines is modulated by HCl concentration. Addition of NaBH(4) to solutions of monofunctional trityl ethers in HgCl(2)/MeCN leads to complete deprotection. Monofunctional trityl amines are partially deprotected only if the complexation reaction is allowed to reach equilibrium. Combination of H(+)- with HgX(+)-catalyzed detritylation methods allows selective deprotection of pertritylated amino and hydroxy thiols. The results appear to be due to the strong difference in the affinity of the donor atoms present in the pertritylated substrates for H(+) and HgX(+). Catalysis based on Br?nsted acids leads to cleaving of the N- and O-trityl bonds with recovering of the S-trityl group; that based on mercury salts allows recovering of N- and O-trityl groups with deprotection of the -SH function. Selectivity in deprotection of pertritylated amino alcohols seems to be severely hampered by similarity in the affinity of N- and O-atoms for H(+) and HgX(+), and, taking advantage of the lower HgX(+)-complexation rate of the N-trityl with respect to the O-trityl group, only preservation of the N-trityl bond has been achieved.     

Diarylphosphinic azides: Photochemical reactions including rearrangement in methanol

On photolysis in methanol the diarylphosphinic azides AR₂P(O)N₃ (Ar = phenyl,p-tolyl,p-anisyl,p-chlorophenyl) rearragement with loss of nitrogen to form (monemeric) metaphosphonimidates which are trapped by the solvent to give methyl NP-diarylphosphonamidates (7) (41–53%). Diarylphosphinic amides (18–42%) are also usually formed, presumably from (triplet) nitrenes. The limited evidence available suggests that the rearrangements take place directly from the photo-excited azides rather than via (singlet) nitrene intermediates. One of the products of rearrangement, methyl NP-di(p-chlorophenyl)phosphonamidate, suffers extensive photochemical dechlorination giving methyl N-phenyl-P-p-chlorophenylphosphonamidate.     

Organic functionalization of the surface of silica with arylsilanes. A new method for synthesizing organic-inorganic hybrid materials

Organic functionalization of a silica surface has been realized by employing arylsilanes. Grafting reactions of aryl(3-chloropropyl)dimethylsilanes (aryl = p-anisyl, p-tolyl, phenyl) with silica were carried out in heptane at 80 °C for 24 h. The ²⁹Si and ¹³C CP/MAS spectra of the obtained silica materials clearly showed that the 3-chloropropyldimethylsilyl moieties were cleanly grafted onto silica via a siloxane (Si-O-Si) bond accompanied by the release of the aryl groups. The loading amounts on FSM-type mesoporous silica (TMPS-4) with aryl(3-chloropropyl)dimethylsilanes were comparable to those with 2-propenylsilane and the most commonly used methoxysilane.     

Selective deprotection of trityl group on carbohydrate by microflow reaction inhibiting migration of acetyl group

The trityl group is an important and useful protecting group for primary hydroxy groups on carbohydrates. However, during deprotection, neighboring acetyl groups can easily migrate to the deprotected hydroxy groups. Hence, deprotection of trityl groups was optimized using a microreactor with regard to flow rate, reagent concentration, reaction time, and substrate concentration. The optimized microflow reaction conditions inhibited migration and could be applied to large-scale reactions and other substrates.     

An efficient synthesis of optically active 3-amino-3-alkyl-2-oxetanones

An efficient two-step synthesis of p-toluenesulfonic acid salts of optically active 3-amino-3-alkyl-2-oxetanones is reported that involves cyclization of N-Boc-α-alkylserines under Mitsunobu reaction conditions followed by deprotection of the amino group with trifluoroacetic acid in the presence of anhydrous p-toluenesulfonic acid.     

Diastereoselective addition of planar N-heterocycles to vinyl sulfone-modified carbohydrates: a new route to isonucleosides

Michael-type addition reactions of planar N-heterocycles at the C-2 positions of vinyl sulfone-modified carbohydrates provide an efficient and general route for the carbon-N-heterocycle bond formation. Therefore, the addition pattern of planar heterocycles, such as imidazole, triazole, thymine, and adenine to 3-C-phenylsulfonyl-hex-2-enopyranosides (1α/1β) and 3-C-p-toluenesulfonyl-pent-2-enofuranosides (2α/2β) was studied for developing a general methodology for the synthesis of new classes of isonucleosides possessing a carbon-N-heterocycle linkage at C-2 positions of furanosyl and pyranosyl sugars. To a great extent, the anomeric configurations of the starting vinyl sulfones play crucial roles in deciding the diastereoselectivity of addition of heterocycles. However, the trityl protected 3-C-p-toluenesulfonyl-hex-2-enopyranosides (33α/33β) were judged to be more practical starting materials for desulfonylation and deprotection for the synthesis of a new class of thymine and adenine deoxyisonucleosides.     

4-(tert-Butyldimethylsilyloxy)benzylidene acetal: a novel benzylidene-type protecting group for 1,2-diols

A novel 1,2-diol-protecting group, p-silyloxybenzylidene group, has been developed. In addition to the stepwise deprotection conditions including desilylation and the subsequent acidic hydrolysis of the p-hydroxybenzylidene group in AcOH-THF-H₂O, we have established the one-pot deprotection under basic conditions [K₂CO₃ (5 equiv), NH₂OH·HCl (5 equiv), and CsF (1 equiv) in MeOH-H₂O].     

Crystal and molecular structures of tris (p-methoxyphenyl)- and tris(2,4, 6-trimethylphenyl)tin(IV) acetates

The crystal and molecular structures of tris(p-anisyl)tin acetate (1) (p-anisyl = p-methoxyphenyl) and trimesityltin acetate (2) (mesityl = 2,4,6-trimethylphenyl) have been determined. Both have monomeric structures with the acetate group acting as an asymmetric bidentate ligand. Bond valence analysis of (1) and (2) and other Ph₃SnO₂CR suggest however that the carboxylate ligand effectively occupies a single bonding position at tin. Thus in (1) and (2) the tin atom is in a chemical environment equivalent to that found in four-coordinate R₃Sn-X systems based on tetrahedral geometry.     

Carbon–carbon bond formation via benzoyl umpolung attained by photoinduced electron-transfer with benzimidazolines

A photoreaction between benzoyl compounds, such as benzoylformate derivatives, and 2-(p-anisyl)-1,3-dimethylbenzimidazoline in the presence of allyl bromide was found to give various allylated alcohols. In the reaction of benzoylformates, α-hydroxy ester enolates, for which the negative charge occurs on the carbonyl carbon of benzoyl (umpolung reactivity), are proposed to be generated as intermediates by electron-transfer from benzimidazolines to the photoexcited benzoylformates; these species react with allyl bromide to produce α-allyl-α-hydroxy esters.     

Trityl Isocyanide as a Mechanistic Probe in Multicomponent Chemistry: Walking the Line between Ugi‐ and Strecker‐type Reactions

Herein, we describe the versatile application of triphenylmethyl (trityl) isocyanide in multicomponent chemistry. This reagent can be employed as a cyanide source in the Strecker reaction and as convertible isocyanide in the preparation of N‐acyl amino acids by Ugi 4CR/detritylation and free imidazo[1,2‐a]pyridin‐3‐amines by a Groebke–Blackburn–Bienaymé 3CR condensation/deprotection protocol. The mechanisms of these three classical MCRs intersect at the common N‐trityl nitrilium ion intermediate, whose predictable reactivity can be exploited towards chemoselective transformations.     

The rearrangement of benzylic trichloromethane-sulfenates to sulfoxides and chlorides

While benzyl trichloromethanesulfenate undergoes no rearrangement to sulfoxide even at high temperatures, the corresponding anisyl ester rearranges to p-anisyl trichloromethyl sulfoxide in hexane under mild conditions. Substitution of hexane by chloroform under similar conditions, lead to the formation of p-anisyl chloride and dichlorosulfine as main reaction products. This process is enhanced by the use of more polar solvents and higher temperatures. The conversion of trichloromethanesulfenate to chloride has also been observed with the benzyl and benzhydryl esters on heating in various solvents, though at very differing rates. Both rearrangements are suggested to take place by an ionization mechanism. Depending on the reaction conditions and nature of the substrate, the sulfenate anion can either recombine with the cation to give sulfoxide, or further dissociate to dichlorosulfine and chloride ion, which gives the benzyl chloride. The observation of an S_N1 type mechanism for rearrangement of sulfenates appears to be unique.     

Effective chemoselective deprotection of 3,4-dimethoxybenzyl (DMB) ethers in the presence of benzyl and p-methoxybenzyl (PMB) ethers by phenyliodine(III) bis(trifluoroacetate) (PIFA)

In this Letter, a selective deprotection of the alcohol protecting 3,4-dimethoxybenzyl (^3,4DMB) group is described. The hypervalent iodine(III) reagent phenyliodine bis(trifluoroacetate) (PIFA) is found to be an efficient reagent for the chemoselective deprotection of ^3,4DMB ethers in the presence of benzyl, p-methoxybenzyl, methoxymethyl, tert-butyldimethylsilyl, and tert-butyldiphenylsilyl ethers under mild conditions. This is the first example of the selective deprotection of the ^3,4DMB group from a hydroxy group with PIFA.     

DDQ mediated regiospecific protection of primary alcohol and deprotection under neutral conditions: Application of new p-methoxy benzyl-pixyl ether as reagent of choice for nucleoside protection

A simple and efficient protocol is described for regiosepecific protection of primary hydroxyl group both in nucleosides and other molecules with p-methoxy-benzyl 2,7-dimethyl pixylether (MBDPE) in presence of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). Furthermore, swift deprotection of 2, 7-dimethylpixyl (DMPx) is accomplished with DDQ in MeOH. Both procedures are successfully implemented on gram-scale synthesis of modified nucleosides. This protocol offers mild and neutral conditions for selective protection and deprotection of DMPx group while compatible in presence of other conventional protecting groups such as benzoyl, benzyl, THP, TBDPS and acetonide.