Anion recognition by 2,2′-binaphthalene derivatives bearing urea and thiourea groups at 8- and 8′-positions by UV-vis and fluorescence spectroscopies

Synthesis and anion recognition properties of 2,2′-binaphthalene derivatives bearing two thiourea (1) and urea (2) groups at 8- and 8′-positions were studied. The structure of receptor 1 was determined by X-ray crystallography. UV-vis spectra of the receptors showed characteristic changes around 300-400 nm through isosbestic points upon the addition of biologically relevant anions such as acetate, dihydrogenphosphate, and chloride in MeCN and DMSO due to restriction of the rotation around the single bond connecting two naphthyl moieties by cooperative guest binding of two recognition sites. Job’s plots showed 1:1 complexation for guest anions. The fluorescence quantum yields of free form of 1 and 2 in MeCN were determined to be 0.021 and 0.57, respectively. The fluorescence intensities of the receptors diminished upon the addition of anions in MeCN. The association constants of receptors 1 and 2 were one or two orders of magnitude greater than the corresponding monothiourea and urea receptors 3 and 4 indicating cooperative hydrogen bonding with guest anions. The selectivity trends of association of anions were F⁻>AcO⁻>H₂PO₄⁻>Cl⁻>>HSO₄⁻≈NO₃⁻≈Br⁻≈I⁻ for 1, and F⁻>AcO⁻≈Cl⁻>H₂PO₄⁻>Br⁻>HSO₄⁻>I⁻≈NO₃⁻ for 2. Receptor 2 showed remarkable Cl⁻ selectivity presumably owing to suitable orientation for effective hydrogen bond formation with Cl⁻.     

Luminescence anion sensing via modulation of MLCT emission from a naphthalimide-Ru(II)-polypyridyl complex

The selective sensing of fluoride (F⁻; an important breakdown product of some chemical warfare agents such as sarin) was achieved by observing quenching in the metal to ligand charge transfer (MLCT) emission of the 1,8-naphthalimide-ruthenium conjugate Ru-Nap-NH₂, which occurs at long wavelengths in CH₃CN, using steady state fluorescence spectroscopy. The F⁻ recognition was also visible to the naked eye, with a clear colour change from yellow to red. The sensing mechanism is most likely initially via hydrogen bonding, between the anion and the amine, which, at higher concentrations, gives rise to deprotonation of the acidic 4-amino-1,8-naphthalimide moiety. However, counter ion effects may also be contributing to the overall emission changes. Other anions such as acetate, phosphate and chloride also give rise to quenching in the fluorescence emission with only minor changes in the UV-vis absorption spectra of Ru-Nap-NH₂. Moreover, phosphate also gave rise to shifts in the λ_max in the emission spectra.     

Dual responsive chemosensors for anions: the combination of fluorescent PET (Photoinduced Electron Transfer) and colorimetric chemosensors in a single molecule

The design and synthesis of two novel fluorescent PET anion sensors is described, based on the principle of ‘fluorophore-spacer-(anion)receptor’. The sensors 1 and 2 employ simple diaromatic thioureas as anion receptors, and the fluorophore is a naphthalimide moiety that absorbs in the visible part of the spectrum and emits in the green. Upon recognition of anions such as F⁻ and AcO⁻ in DMSO, the fluorescence emission of 1 and 2 was ‘switched off’, with no significant changes in the UV-vis spectra. This recognition shows a 1:1 binding between the receptor and the anions. In the case of F⁻, further additions of the anion, gave rise to large changes in the UV-vis spectra, where the λ_max at 455 nm was shifted to 550 nm. These changes are thought to be due to the deprotonation of the 4-amino moiety of the naphthalimide fluorophore. This was in fact found to be the case, using simple naphthalimide derivatives such as 6. Sensors 1 and 2 can thus display dual sensing action; where at low concentrations, the fluorescence emission is quenched, and at higher concentrations the absorption spectra are modulated.     

New interlocked molecules generated from a podand containing urea units and imidazolium salts using an anion template

A podand containing urea units (L) was found to form interlocked structures with 2,5-dihexylamide imidazolium salts (3·X), 2,5-dihexyl imidazolium salts (4·X), and 2,5-dihexyl benzoimidazolium salts (5·X), where X=Cl⁻, Br⁻, and PF₆⁻ using anions as templates. The binding ability of L and guest molecules was evaluated by ¹H NMR titrations in CDCl₃. It was found that L could form complexes with guest molecules in the following order, 3·X > 5·X > 4·X. Stabilities of the complexes also depended on shape of the templated anions: Cl⁻>Br⁻?PF₆⁻. Hydrogen bonding and π-π stacking interactions played an important role in the self-assembling of these interlocked molecules.     

Binding studies of tetrathiafulvalene-calix[4]pyrroles with electron-deficient guests

The neutral meso-octamethylporphyrinogen derivative, tetraTTF-calix[4]pyrrole 1 (TTF=tetrathiafulvalene), acts as a multi-faceted receptor in that it interacts with an assortment of different guests in different ways. The conformation of receptor 1 can be reversibly switched between the 1,3-alternate conformation (i.e., 1, Fig. 1) and the cone conformation (i.e., 1·Cl⁻, Fig. 2) by the repetitive addition of chloride and sodium ions. In this paper, the results of detailed and systematic complexation studies involving both 1 and its chloride-bound complex, 1·Cl⁻, with a variety of guests are described. Receptor 1 binds quasi-planar nitroaromatic guests in its 1,3-alternate conformation, while release of these guests takes place upon addition of chloride anions. On the other hand, spherical fullerene guests are strongly bound by 1·Cl⁻. Finally, it was found that a bidentate guest, consisting of a quasi-planar 2,5,7-trinitro-9-dicyanomethylenefluorene moiety tethered to a spherical C₆₀ fullerene, could be recognized by receptor 1 in either its 1,3-alternate or its chloride-bound cone conformation, albeit through very different binding modes.     

Naked eye sensing of anions using thiourea based chemosensors with real time application

Novel chromogenic sensors with thiourea moiety as receptor unit were synthesized and characterized using IR and NMR spectroscopic techniques. The receptors 1 and 2 bearing hydrogen bonding site demonstrate visually striking color change, UV–vis, and fluorescence responses for F⁻, AcO⁻, and OH⁻ over other anions such as Cl⁻, Br⁻, H₂PO₄⁻ and HSO₄⁻. Both the receptors 1 and 2 demonstrate detection limit at micro molar level. Further insight to the nature of interaction between receptors and anions was studied using ¹H NMR titration experiment. In particular, the fluoride of tooth paste and mouthwash in water phase can be detected by receptor 2.     

3-Urea-1,8-naphthalimides are good chemosensors: a highly selective dual colorimetric and fluorescent ICT based anion sensor for fluoride

The 1,8-naphthalimide sensor 1 was developed as a colorimetric and fluorescent sensor for anions. Being the first example of such anion sensors, where the 3-position of the naphthalimide ring is used to incorporate the anion recognition moiety, in this case a trifluromethyl derived aryl urea moiety, the sensors gave rise to significant changes in both the absorption and the emission spectra, which were both red shifted upon interacting with anions. The changes were most pronounced for fluoride, and to a lesser extent for acetate and hydrogen phosphate, in DMSO, making 1 a highly selective sensor for F⁻.     

Bifunctional fluorescent thiacalix[4]arene based chemosensor for Cu and F ions

A new thiacalix[4]arene based fluorescent sensor bearing two dansyl groups has been synthesized in cone conformation. In CH₃CN:CH₂Cl₂ (1:1), the presence of Cu (II) induces the formation of a 1:1 metal:ligand complex, which exhibits increasing emission at 433 nm at the expense of the fluorescent emission of 1 centered at 504 nm. The detection limit of the sensor for Cu²⁺ is 2×10⁻⁷ mol L⁻¹. For anion sensing, 1 shows a high selectivity for fluoride ions over other anions tested.     

Fluoride-induced intermolecular excimer formation of bispyrenyl thioureas linked by polyethylene glycol chains

New bispyrenyl thioureas linked by polyethylene glycol (PEG) chains, L1-L3, and methoxy benzene pyrene thiourea, L4, were synthesized. Upon binding with F⁻ in CHCl₃, L1-L3 exhibited strong excimer emission bands (I_E) and weak monomer emission bands (I_M), while L4 displayed the same intensity of both bands. However, little or no change was observed in fluorescence spectra of L1 upon adding OH⁻, AcO⁻, BzO⁻, H₂PO₄⁻, Cl⁻, Br⁻, and I⁻. Therefore, only F⁻ induced the pyrene excimer formation. Job’s plots showed 1/1 or 2/2 complexation of L1 with F⁻. Ratios of I_E/I_M of L1·F⁻ complex were dependent on the concentration of L1, implying that the dimerization of L1 proceeded via the intermolecular excimer formation. Among L1-L4, L1 possessed the highest binding constant and sensitivity toward F⁻ implying the importance of the linking PEG chain. L1 was demonstrated to be an excellent probe for F⁻ in CHCl₃ with the detection limit as low as 46.2 μg/L.     

Calix[4]arenes containing urea and crown/urea moieties: effects of the crown ether unit and Na towards anion binding ability

Calix[4]arenes containing urea and crown/urea moieties, 7 and 10, respectively have been synthesized. ¹H NMR titrations of 7 and 10 with anions in DMSO-d₆ showed that 7 and 10 formed complexes with Cl⁻, Br⁻, NO₃⁻ and H₂PO₄⁻ to a different extent. The association constants of 7 and 10 towards anions were calculated and found to vary as H₂PO₄⁻>Cl⁻>Br⁻>NO₃⁻. However, compared to 7 the presence of the crown unit in 10 resulted in a slightly higher affinity to Cl⁻ and Br⁻, but a lower affinity to H₂PO₄⁻. Upon addition of Na⁺, the binding ability of 10 towards H₂PO₄⁻ is increased due to ion-pair enhancement.     

Fluorescent sensing of anions using a bis-quinoxaline amidothiourea based supramolecular cleft; an example of an anion-induced deprotonation event

The quinoxaline 1, possessing a 2,6-pyridyl-based amidothiourea moiety, with the view of forming a pre-organised molecular cleft, was developed as a fluorescent anion sensor. The sensing ability of 1 was evaluated in organic solution where both the ground and the excited state of 1 was affected upon recognition of anions such as acetate [as tetrabutylammonium salt (TBAAc) solution] at the amiodothiourea moieties in MeCN. The fluorescence of 1, with λ_max at 477 nm, was, on all occasions quenched, upon anion recognition. Using TBAOH, we also show that the same anion-induced changes occurred; demonstrating that for this particular sensor, the anion-sensing takes place via a deprotonation mechanism. This anion-induced deprotonation event was further investigated by carrying out ¹H NMR titrations on 1, using both AcO⁻ and OH⁻ in DMSO-d₆.     

Anion recognition through hydrogen bonding by adamantane-dipyrromethane receptors

Adamantane-dipyrromethane (AdD) receptors [di(pyrrole-2-yl)methyladamantane (1), 2,2-di(pyrrole-2-yl)adamantane (2), 1,3-bis[di(pyrrole-2-yl)methyl]adamantane (3), 2,2,6,6-tetra(pyrrole-2-yl)adamantane (4)] form complexes with F⁻, Cl⁻, Br⁻, AcO⁻, NO₃⁻, HSO₄⁻, and H₂PO₄⁻. The association constants of the complexes were determined by ¹H NMR titrations, whereas the geometries of complexes 1·F⁻ (2:1), 2·F⁻ (2:1), 2·Cl⁻ (2:1), 2·AcO⁻ (2:1), and 4·F⁻ (1:1) were determined by X-ray structural analysis. The most stable complexes are of 2:1 stoichiometry with F⁻ and AcO⁻. The stability constants are in accordance with the anion basicity and the ability of AdD receptors to place the hydrogen bonding donor groups in a tetrahedral fashion around anions. The binding energies of the complexes between receptors 1-4 and F⁻ anion are calculated using quantum chemical methods. The calculated results show that the solvent polarity is important for the complexation of fluoride ion with AdD receptors 1-4.     

Use of the interaction of a boronic acid with a merocyanine to develop an anionic colorimetric assay

A displacement assay based on the interaction of Brooker’s merocyanine (BM), a merocyanine dye, with an excess of phenylboronic acid (BA) was studied in acetonitrile. BM is colored in solution, but its reaction with BA yields a colorless covalently linked BA-BM species. This strategy was studied in the presence of different anions (F⁻, Cl⁻, Br⁻, I⁻, , , CH₃COO⁻, and ), but only fluoride, a strongly nucleophilic anion, and to a much lesser extent acetate, reacted with BA-BM, displacing BM through a bimolecular nucleophilic substitution mechanism, and coloring the solution. Experimental data were collected and are shown here in order to gain a better understanding of this chromogenic sensor.     

Membrane-active calixarenes: toward ‘gating’ transmembrane anion transport

This paper describes on-going efforts to develop calixarene amides as transmembrane anion transporters. We report on the transport of Cl⁻ anions across phospholipid membranes as mediated by some lipophilic calixarenes, all fixed in the cone conformation. We present significant findings regarding use of these calixarenes as transmembrane Cl⁻ transporters: (1) the cone conformer cone-H 2a, like its 1,3-alt and paco isomers, transports Cl⁻ across liposomal membranes; (2) the conformation of the calixarene (paco-H 1 vs cone-H 2a) is important for modulating Cl⁻ transport rates; (3) the substitution pattern on the calixarene's upper rim is crucial for Cl⁻ transport function; and (4) at least one of the four arms of the calixarene can be left unmodified without loss of function, enabling development of a pH-sensitive anion transporter (TAC-OH 3). This last finding is useful given the interest in gating the activity of synthetic ion transporters with external stimuli.     

Ferrocene-based imidazolium receptors for anions

Cyclic and acyclic ferrocene derivatives bearing two imidazolium rings have been synthesized and characterized by NMR, elemental analysis, mass spectra, and X-ray crystallography. Electrochemical measurements revealed that all the receptors displayed a significant anodic shift response for F⁻. In addition, for receptors 1, 2, and 4, addition of HSO₄⁻ induced quite different electrochemical behavior with dramatic cathodic peak current increase on CV. ¹H NMR titrations demonstrated that receptors 1, 2, and 4 showed selectivity for AcO⁻ while receptor 3 exhibited high affinity toward Cl⁻ among the anions investigated.     

An anionic chromogenic sensor based on the competition between the anion and a merocyanine solvatochromic dye for calix[4]pyrrole as a receptor site

The interaction of Brooker’s merocyanine (BM), a merocyanine dye, with calix[4]pyrrole (CP) was studied in acetonitrile. BM is violet in solution, but its interaction with CP changes the color of the solution due to the formation of CP-BM species associated through hydrogen bonding. A displacement assay was then carried out in the presence of different anions (F⁻, Cl⁻, Br⁻, I⁻, , , and ). It was verified that F⁻, and to a lesser extent Cl⁻ and , displace BM through the formation of a complex with CP, coloring the solution. Addition of makes the solution almost colorless because it is sufficiently acidic to transfer a proton to BM, removing it from the receptor site in CP and protonating the dye, thereby allowing the visual detection of the anion in relation to the other anions.     

A ratiometric fluorescent chemosensor, 1,10-phenanthroline-4,7-dione, for anions in aqueous-organic media

A new fluorescent chemosensor, 1,10-phenanthroline-4,7-dione (1), which is capable of the ratiometric sensing of anions in aqueous MeCN, was developed. Chemosensor 1 recognized an anion via two NH groups in the molecule, and showed a much higher affinity for F⁻ than that of 4-quinolone, which binds to an anion at one NH group of the molecule. Upon binding to F⁻, the intensity of the emission band ascribed to the complex of 1-F⁻ was drastically enhanced, while the emission intensity of unbound 1 gradually decreased. The changes in these two emission bands enabled the successful ratiometric sensing.     

Novel thiophene based colorimetric and fluorescent receptor for selective recognition of fluoride ions

A colorimetric anion sensor 2,2′-(1E,1′E)-(thiophene-2,5-diylbis(methan-1-yl-1-ylidene)) was synthesized and characterized by various spectroscopic techniques. Anion binding studies were carried out using UV-visible spectrophotometric titrations and emission spectra studies, revealed that the receptor exhibits selective recognition toward F⁻over other anions. The selectivity for F⁻among the halides is attributed mainly to the hydrogen-bond interaction of the receptor with F⁻. Receptor 1 showed color change from fluorescent green to orange in the presence of tetrabutylammonium fluoride with 1:1 stoichiometry. Receptor 1 exhibits remarkably enhanced fluorescence intensity.     

Quaternary ammonium salt-based chromogenic and fluorescent chemosensors for fluoride ions

Chemosensors 5-7 possessing a quaternary ammonium cation (for electrostatic interactions) and an N-H group(s) (for H-bonding) as recognition sites and an anthracene-9,10-dione as both a chromogenic and fluorescent moiety exhibit absorption and emission changes with fluoride ions only. No significant response to other anions such as Cl⁻, Br⁻, I⁻, , CH₃COO⁻, , and is observed. The dual emission at λ_max 580 nm (free 5/6) and λ_max 510 and 540 nm (5/6 + F⁻) in chemosensors 5 and 6 enables ratiometric analysis of fluoride ions.     

Fluoride sensing with a PCT-based calix[4]arene

Novel calix[4]arene-based anion sensor 1 with two coumarin units attached via amido functions acting also as binding sites is presented. Complexation of F⁻ by PCT-based 1 causes selectively red-shift in UV-vis absorption and in fluorescence emission due to H-bonding followed by deprotonation of NH-amide groups.