聚合物发光电化学池的研究——中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(Ⅱ)

简要介绍本研究组 1997年以来在聚合物发光电化学池 (LEC)研究中取得的一些成果,包括发光聚合物的电化学性质及其HOMO和LUMO能级的电化学测量,LECp i n结的交流阻抗分析,双功能嵌段共聚物LEC,以及咪唑盐离子液体掺杂的室温准冷冻p i n结LEC等.     

Scanning Kelvin probe imaging of the potential profiles in fixed and dynamic planar LECs

We measure the potential profiles of both dynamic and fixed junction planar light-emitting electrochemical cells (LECs) using Scanning Kelvin Probe Microscopy (SKPM) and compare the results against models of LEC operation. We find that, in conventional dynamic junction LECs formed using lithium trifluoromethanesulfonate (LiTf), poly(ethylene oxide) (PEO), and the soluble alkoxy-PPV derivative poly[2-methoxy-5-(3',7'-dimethyl-octyloxy)-p-phenylenevinylene (MDMO-PPV), the majority (>90%) of the potential is dropped near the cathode with little potential drop across either the film or the anode/polymer interface. In contrast, when examining fixed junction LECs where the LiTf is replaced with [2-(methacryloyloxy)ethyl] trimethylammonium 2-(methacryloyloxy)ethane-sulfonate (METMA/MES), the potential is dropped at both contacts during the initial poling. The potential profile evolves over a period of approximately 60 min under bias to achieve a final profile similar to that obtained in the LiTf systems. In addition to elucidating the differences between conventional dynamic LECs and fixed LECs incorporating cross-linkable ion pair monomers, the results on both systems provide direct evidence for a primarily "p-type" LEC consistent with the emitting junction near the cathode and relatively small electric fields across the bulk of the device for these two material systems.     

Spatial control of p-n junction in an organic light-emitting electrochemical transistor

Low-voltage-operating organic electrochemical light-emitting cells (LECs) and transistors (OECTs) can be realized in robust device architectures, thus enabling easy manufacturing of light sources using printing tools. In an LEC, the p-n junction, located within the organic semiconductor channel, constitutes the active light-emitting element. It is established and fixated through electrochemical p- and n-doping, which are governed by charge injection from the anode and cathode, respectively. In an OECT, the electrochemical doping level along the organic semiconducting channel is controlled via the gate electrode. Here we report the merger of these two devices: the light-emitting electrochemical transistor, in which the location of the emitting p-n junction and the current level between the anode and cathode are modulated via a gate electrode. Light emission occurs at 4 V, and the emission zone can be repeatedly moved back and forth within an interelectrode gap of 500 μm by application of a 4 V gate bias. In transistor operation, the estimated on/off ratio ranges from 10 to 100 with a gate threshold voltage of -2.3 V and transconductance value between 1.4 and 3 μS. This device structure opens for new experiments tunable light sources and LECs with added electronic functionality.     

A supramolecularly-caged ionic iridium(III) complex yielding bright and very stable solid-state light-emitting electrochemical cells

A new iridium(III) complex showing intramolecular interligand pi-stacking has been synthesized and used to improve the stability of single-component, solid-state light-emitting electrochemical cell (LEC) devices. The pi-stacking results in the formation of a very stable supramolecularly caged complex. LECs using this complex show extraordinary stabilities (estimated lifetime of 600 h) and luminance values (average luminance of 230 cd m-2) indicating the path toward stable ionic complexes for use in LECs reaching stabilities required for practical applications.     

Accumulation of argpyrimidine, a methylglyoxal-derived advanced glycation end product, increases apoptosis of lens epithelial cells both in vitro and in vivo

The formation of advanced glycation end products (AGEs) has been considered to be a potential causative factor of injury to lens epithelial cells (LECs). Damage of LECs is believed to contribute to cataract formation. The purpose of this study was to investigate the cytotoxic effect of AGEs on LECs both in vitro and in vivo. We examined the accumulation of argpyrimidine, a methylglyoxal-derived AGE, and the expression of apoptosis-related molecules including nuclear factor- kappaB (NF-κB), Bax, and Bcl-2 in the human LEC line HLE-B3 and in cataractous lenses of Zucker diabetic fatty (ZDF) rats, an animal model of type 2 diabetes. In cataractous lenses from twenty-oneweek- old ZDF rats, LEC apoptosis was markedly increased, and the accumulation of argpyrimidine as well as subsequent activation of NF-κB in LECs were significantly enhanced. The ratio of Bax to Bcl-2 protein levels was also increased. In addition, the accumulation of argpyrimidine triggered apoptosis in methylglyoxal- treated HLE-B3 cells. However, the presence of pyridoxamine (an AGEs inhibitor) and pyrrolidine dithiocarbamate (a NF-κB inhibitor) prevented apoptosis in HLE-B3 cells through the inhibition of argpyrimidine formation and the blockage of NF-κB nuclear translocalization, respectively. These results suggest that the cellular accumulation of argpyrimidine in LECs is NF-κB-dependent and pro-apoptotic.     

Hybrid White-Light-Emitting Electrochemical Cells Based on a Blue Cationic Iridium(III) Complex and Red Quantum Dots

Solid-state white light-emitting electrochemical cells (LECs) show promising advantages of simple solution fabrication processes, low operation voltage, and compatibility with air-stable cathode metals, which are required for lighting applications. To date, white LECs based on ionic transition metal complexes (iTMCs) have shown higher device efficiencies than white LECs employing other types of materials. However, lower emission efficiencies of red iTMCs limit further improvement in device performance. As an alternative, efficient red CdZnSeS/ZnS core/shell quantum dots were integrated with a blue iTMC to form a hybrid white LEC in this work. By achieving good carrier balance in an appropriate device architecture, a peak external quantum efficiency and power efficiency of 11.2 % and 15.1 lm W⁻¹, respectively, were reached. Such device efficiency is indeed higher than those of the reported white LECs based on host–guest iTMCs. Time- and voltage-dependent electroluminescence (EL) characteristics of the hybrid white LECs were studied by means of the temporal evolution of the emission-zone position extracted by fitting the simulated and measured EL spectra. The working principle of the hybrid white LECs was clarified, and the high device efficiency makes potential new white-emitting devices suitable for solid-state lighting technology possible.     

Cationic IrIII Emitters with Near-Infrared Emission Beyond 800 nm and Their Use in Light-Emitting Electrochemical Cells

Solid-state near-infrared (NIR) light-emitting devices have recently received considerable attention as NIR light sources that can penetrate deep into human tissue and are suitable for bioimaging and labeling. In addition, solid-state NIR light-emitting electrochemical cells (LECs) have shown several promising advantages over NIR organic light-emitting devices (OLEDs). However, among the reported NIR LECs based on ionic transition-metal complexes (iTMCs), there is currently no iridium-based LEC that displays NIR electroluminescence (EL) peaks near to or above 800 nm. In this report we demonstrate a simple method for adjusting the energy gap between the highest-occupied molecular orbital (HOMO) and the lowest-unoccupied molecular orbital (LUMO) of iridium-based iTMCs to generate NIR emission. We describe a series of novel ionic iridium complexes with very small energy gaps, namely NIR1 – NIR6 , in which 2,3-diphenylbenzo[g]quinoxaline moieties mainly take charge of the HOMO energy levels and 2,2′-biquinoline, 2-(quinolin-2-yl)quinazoline, and 2,2′-bibenzo[d]thiazole moieties mainly control the LUMO energy levels. All the complexes exhibited NIR phosphorescence, with emission maxima up to 850 nm, and have been applied as components in LECs, showing a maximum external quantum efficiency (EQE) of 0.05 % in the EL devices. By using a host–guest emissive system, with the iridium complex RED as the host and the complex NIR3 or NIR6 as guest, the highest EQE of the LECs can be further enhanced to above 0.1 %.     

New luminescent polymers for leds and LECS

Statistical copolymers 5 containing poly(2-dimethyloctylsilyl-1,4-phenylenevinylene) (DMOS-PPV) and poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) have been synthesized using the dehydrohalogenation condensation route. The copolymers show a shift of photoluminescence maxima to longer wavelengths as the proportion of the MEH-PV unit increases. This trend is accompanied by reduced efficiencies and lower turn-on voltages in single layer electroluminescent devices. Light-emitting electrochemical cells (LECs) have been prepared using a blend of DMOS-PPV 1 with poly(ethylene oxide)/lithium triflate and the homopolymer poly[2-methoxy-5-(triethoxymethoxy)-1,4-phenylene vinylene] (MTEM-PPV) 9 with lithium triflate. In comparison with single-layer devices which were fabricated using the homopolymers 1 and poly[2,5-bis(triethoxymethoxy)-1,4-phenylene vinylene] (BTEM-PPV) 10 , the LEC devices showed lower turn-on voltages.     

Solid-state white light-emitting electrochemical cells using iridium-based cationic transition metal complexes

White electroluminescent (EL) emission from single-layered solid-state light-emitting electrochemical cells (LECs) based on host-guest cationic iridium complexes has been successfully demonstrated. The devices show white EL spectra (Commission Internationale de l'Eclairage coordinates ranging from (x, y) = (0.45, 0.40) to (0.35, 0.39) at 2.9-3.3 V with high color rendering indices up to 80. Peak external quantum efficiency and peak power efficiency of the white LEC reach 4% and 7.8 lm/W, respectively. These results suggest that white LECs based on host-guest cationic transition metal complexes may be a promising alternative for solid-state lighting technologies.     

Stability of thin-film solid-state electroluminescent devices based on tris(2,2'-bipyridine)ruthenium(II) complexes

The factors affecting the operating life of the light-emitting electrochemical cells (LECs) based on films of tris(2,2'-bipyridine)ruthenium(II) both in sandwich (using an ITO anode and a Ga:Sn cathode) and planar (using interdigitated electrode arrays (IDAs)) configurations were investigated. Stability of these devices is greatly improved when they are produced and operated under drybox conditions. The proposed mechanism of the LEC degradation involves formation of a quencher in a small fraction of tris(2,2'-bipyridine)ruthenium(II) film adjacent to the cathode, where light generation occurs, as follows from the observed electroluminescence profile in the LECs constructed on IDAs, showing that the charge injection in such devices is highly asymmetric, favoring hole injection. Bis(2,2'-bipyridine)diaquoruthenium(II) is presumed to be the quencher responsible for the device degradation. A microscopic study of photo- and electroluminescence profiles of planar light-emitting electrochemical cells was shown as a useful approach for studies of charge carrier injection into organic films.     

Perovskite Light-Emitting Electrochemical Cells Employing Electron Injection/Transport Layers of Ionic Transition Metal Complexes

Recently, perovskites have attracted intense attention due to their high potential in optoelectronic applications. Employing perovskites as the emissive materials of light-emitting electrochemical cells (LECs) shows the advantages of simple fabrication process, low-voltage operation, and compatibility with inert electrodes, along with saturated electroluminescence (EL) emission. Unlike in previously reported perovskite LECs, in which salts are incorporated in the emissive layer, the ion-transport layer was separated from the emissive layer in this work. The layer of ionic transition metal complex (iTMC) not only provides mobile ions but also serves as an electron-injection/transport layer. Orthogonal solvents are used in spin coating to prevent the intermixing of stacked perovskite and iTMC layers. The blue iTMC with high ionization potential is effective in blocking holes from the emissive layer and thus ensures EL color saturation. In addition, the carrier balance of the perovskite/iTMC LECs can be optimized by adjusting the iTMC layer thickness. The optimized external quantum efficiency of the CsPbBr₃/iTMC LEC reaches 6.8 %, which is among the highest reported values for perovskite LECs. This work successfully demonstrates that, compared with mixing all components in a single emissive layer, separating the layer of ion transport, electron injection and transport from the perovskite emissive layer is more effective in adjusting device carrier balance. As such, solution-processable perovskite/iTMC LECs open up a new way to realize efficient perovskite LECs.     

Enhanced stability of blue-green light-emitting electrochemical cells based on a cationic iridium complex with 2-(1-phenyl-1H-pyrazol-3-yl)pyridine as the ancillary ligand

A new cationic iridium complex has been developed with 2-(1-phenyl-1H-pyrazol-3-yl)pyridine as the ancillary ligand, which bears a pendant protective phenyl ring within the molecule; blue-green light-emitting electrochemical cells (LECs) based on the complex show dramatically enhanced stability compared to the LEC based on a similar complex without pendant phenyl rings.     

The efficiency of light-emitting electrochemical cells

We report on the efficiency behavior of light-emitting electrochemical cells (LECs) fabricated from a methyl-substituted ladder-type poly(p-phenylene) (mLPPP) that was blended with a crown ether based solid state electrolyte. Unlike organic light-emitting diodes (oLEDs) utilizing mLPPP as an active layer, the LECs suffer from a loss of efficiency at elevated current densities. From scan rate dependent studies we deduce that this efficiency drop is not only due to device decomposition upon high voltage operation and we also reveal the intrinsic mode of LEC operation. The decreasing width of the intrinsic region between the p- and n-type doped zones upon ongoing pin-junction formation causes distinct (either field or electrode induced) luminance quenching effects.     

Electroluminescent Properties of LECs Based on Ionic Transition Metal Complexes Using Tetrazole-Based Ancillary Ligand

Light-emitting electrochemical cells (LECs) are a promising type of electroluminescent device for display and lighting applications. In this study, LECs based on ionic iridium complexes utilizing a tetrazole based ancillary ligand were fabricated and their electrical properties were investigated. Two new iridium(III) complexes with tetrazole based ancillary ligands, namely, [Ir(ppy)₂(tetrazole)]PF₆ (complex 1) and [Ir(dfppy)₂(tetrazole)]PF₆ (complex 2) (where ppy is 2-phenylpyridine, dfppy is 2-(2,4-difluorophenyl)pyridine, tetrazole is 5-bromo-2-(2-methyl-2H-tetrazol-5-yl)-pyridine and PF₆ is hexafluorophosphate), have been synthesized and characterized. These synthesized complexes were used for the fabrication of LEC devices. LECs based on complex 1 result in orange light emission (576 nm) with the Commission Internationale de l’Eclairage (CIE) coordinates of (0.45, 0.49), while complex 2 emits green (518 nm) electroluminescence with the CIE coordinates of (0.33, 0.49). Our work suggests that the light emission of cationic iridium complexes can easily be tuned by the substituents on the cyclometalated ligands.     

Light-emitting electrochemical cells with millimeter-sized interelectrode gap: low-voltage operation at room temperature

We have prepared and characterized polymer light-emitting electrochemical cells (LECs) containing a binary mixture of the conjugated polymer poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylenevinylene] and the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate as the active material. We demonstrate, for the first time, that it is possible to turn on and attain light emission from LECs, with a mm-sized interelectrode gap separating two identical Au electrodes, at a low voltage of 3 V and at room temperature.     

共轭聚合物发光电池

共轭聚合物发光电池是最近出现的一种新型是致发光器件，它是由两上电极和夹在其间的一层共轭聚合物发光和集合物固体电解质的复合膜所组成。与聚合物发光二极管相比，具有稳定性好、工作电压低突出优点，具有广阔的应用前景。本文综述了这类发光电池的组成、工作原理和和研究进展，并提出了一些与其相关、值得深入研究的导合物电化学和电子过程的基础理论问题。     

Tailoring carrier injection efficiency to improve the carrier balance of solid-state light-emitting electrochemical cells

We study the influence of the carrier injection efficiency on the performance of light-emitting electrochemical cells (LECs) based on a hole-preferred transporting cationic transition metal complex (CTMC) [Ir(dfppz)(2)(dtb-bpy)](+)(PF(6)(-)) (complex 1) and an electron-preferred transporting CTMC [Ir(ppy)(2)(dasb)](+)(PF(6)(-)) (complex 2) (where dfppz is 1-(2,4-difluorophenyl) pyrazole, dtb-bpy is 4,4'-di(tert-butyl)-2,2'-bipyridine, ppy is 2-phenylpyridine and dasb is 4,5-diaza-9,9'-spirobifluorene). Experimental results show that even with electrochemically doped layers, the ohmic contacts for carrier injection could be formed only when the carrier injection barriers were relatively low. Thus, adding carrier injection layers in LECs with relatively high carrier injection barriers would affect carrier balance and thus would result in altered device efficiency. Comparison of the device characteristics of LECs based on complex 1 and 2 in various device structures suggests that the carrier injection efficiency of CTMC-based LECs should be modified according to the carrier transporting characteristics of CTMCs to optimize device efficiency. Hole-preferred transporting CTMCs should be combined with an LEC structure with a relatively high electron injection efficiency, while a relatively high hole injection efficiency would be required for LECs based on electron-preferred transporting CTMCs. Since the tailored carrier injection efficiency compensates for the unbalanced carrier transporting properties of the emissive layer, the carrier recombination zone would be located near the center of the emissive layer and exciton quenching near the electrodes would be significantly mitigated, rendering an improved device efficiency approaching the upper limit expected from the photoluminescence quantum yield of the emissive layer and the optical outcoupling efficiency from a typical layered light-emitting device structure.     

Lens epithelial cell response to polymer stiffness and polymer chemistry

Posterior capsule opacification (PCO) is the most common complication of cataract surgery, and intraocular lens (IOL) implantation is the standard of care for cataract patients. Induction of postoperative epithelial-mesenchymal transition (EMT) in residual lens epithelial cells (LEC) is the main mechanism by which PCO forms. Previous studies have shown that IOLs made with different materials have varying incidence of PCO. The aim of this paper was to study the interactions between human (h)LEC and polymer substrates. Polymers and copolymers of 2-hydroxyethyl methacrylate (HEMA) and 3-methacryloxypropyl tris(trimethylsiloxy)silane (TRIS) were synthesized and evaluated due to the clinical use of these materials as ocular biomaterials and implants. The chemical properties of the polymer surfaces were evaluated by contact angle, and polymer stiffness and roughness were measured using atomic force microscopy. In vitro studies showed the effect of polymer mechanical properties on the behavior of hLECs. Stiffer polymers increased α-smooth muscle actin expression and induced cell elongation. Hydrophobic and rough polymer surfaces increased cell attachment. These results demonstrate that attachment of hLECs on different surfaces is affected by surface properties in vitro, and evaluating these properties may be useful for investigating prevention of PCO.     

Light-emitting electrochemical cells based on a supramolecularly-caged phenanthroline-based iridium complex

The complex [Ir(ppy)(2)(pphen)][PF(6)] (Hppy = 2-phenylpyridine, pphen = 2-phenyl-1,10-phenanthroline) has been prepared and evaluated as an electroluminescent component for light-emitting electrochemical cells (LECs). Like in analogous LECs using bpy-based iridium(III) complexes a significant enhancement of the device stability is observed.     

Light modulation and coupling and rugby‐shaped resonators based on polymer fiber waveguide junctions

We report a systematic study of the dependence of the output efficiency and scattering efficiency on crossing angle, guided wavelength, and junction size in polymer nanofiber waveguide junctions. The junctions were assembled by using poly(trimethylene terephthalate) nanofibers (PNFs) with diameters of 200–800 nm under an optical microscope with the assistant of micromanipulators. A Chinese character and an SU pattern based the PNF junction technique have been demonstrated, moreover, the junction technique has also been expanded to various elastic substrates instead of glass substrate with high robustness. To further demonstrate the ability of modulating light of using the junction technique, we fabricated rugby‐shaped microresonators based on the polymer fiber junction, which exhibited high Q factor up to 10⁵. Furthermore, the microresonators can incorporate dyes or quantum dots into them, acting as active devices. We believe that the polymer fiber junction technique would provide a versatile platform for investigating light modulation or light matter interaction in various cavities with different configuration. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 833–840