Probing the effects of π–π stacking on the controlled radical polymerization of styrene and fluorinated styrene

The addition of the π–π stacking agent octafluorotoluene (OFT) resulted in up to a 50% reduction in monomer conversion after 24 h for atom transfer radical polymerization (ATRP) reactions of styrene, when performed at 85 °C with 1 eq of OFT compared with styrene in the initial reaction mixture. Monitoring the progress showed that the ATRP of styrene in the presence of either OFT or hexafluorobenzene (HFB) maintained a linear relationship between monomer conversion and number average molecular weights, while showing a first order rate dependence on monomer. The effects of π–π stacking on the K_ATRP could be overcome by using adjusting the redox activity of the metal‐ligand complex while maintaining reaction temperatures of 85 °C. Further experiments showed that nitroxide‐mediated polymerizations of St were affected to an identical extent by the presence of the π–π stacking agent HFB. The ATRP of pentafluorostyrene (PFSt) in the presence of π–π stackers benzene or toluene showed an increase in monomer conversion compared with reactions in their absence, consistent with M_n π–π stacking increasing the stability of the active radical. Interactions between the π–π stacking agents OFT and HFB and the aromatic groups in the ATRP of St or PFSt were verified by ¹H NMR analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Quinone transfer radical polymerization (QTRP) of styrene: Catalysis by different metal complexes

Styrene has been polymerized by a Quinone Transfer Radical Polymerization (QTRP) based on the redox reaction of an ortho‐quinone and a metal catalyst. Several metal acetylacetonates have been tested in this work. The radical polymerization of styrene is largely controlled when phenanthrenequinone (PhQ) is used with catalytic amounts of Co(acac)₂, Ni(acac)₂, Mn(acac)_{2 or 3}, and Al(acac)₃. As a rule, in the presence of all these metallic complexes, the polystyrene molar mass increases with the monomer conversion, and polydispersity (M_w/M_n) is in the 1.3–1.6 range (at least until 40% monomer conversion). Styrene polymerization has also been resumed by polystyrene chains prepared by QTRP. In the specific case of manganese acetylacetonates, an amine or phosphine ligand has to be added for the control to be effective. Finally, two mechanistic hypotheses have been proposed, depending on whether the oxidation state of the metal can be easily changed or not. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2723‐2733, 2005     

Synthesis, spectral characterization of Schiff base transition metal complexes: DNA cleavage and antimicrobial activity studies

A new series of transition metal complexes of Cu(II), Ni(II), Co(II), Mn(II), Zn(II), VO(IV), Hg(II) and Cd(II) have been synthesized from the Schiff base (L) derived from 4-aminoantipyrine, 3-hydroxy-4-nitrobenzaldehyde and o-phenylenediamine. Structural features were obtained from their elemental analyses, magnetic susceptibility, molar conductance, mass, IR, UV-Vis, ¹H NMR and ESR spectral studies. The data show that these complexes have composition of ML type. The UV-Vis, magnetic susceptibility and ESR spectral data of the complexes suggest a square-planar geometry around the central metal ion except VO(IV) complex which has square-pyramidal geometry. The redox behaviour of copper and vanadyl complexes was studied by cyclic voltammetry. Antimicrobial screening tests gave good results in the presence of metal ion in the ligand system. The nuclease activity of the above metal complexes shows that Cu, Ni and Co complexes cleave DNA through redox chemistry whereas other complexes are not effective.     

Studies on DNA cleavage and antimicrobial screening of transition metal complexes of 4-aminoantipyrine derivatives of N2O2 type

A new series of transition metal complexes of Cu(II), Ni(II), Zn(II) and VO(IV), were synthesized from the Schiff base (L) derived from 4-aminoantipyrine, 3-hydroxy-4-nitrobenzaldehyde and acetylacetone. The structural features were arrived from their elemental analyses, magnetic susceptibility, molar conductance, Mass, IR, UV-Vis., ¹H NMR and ESR spectral studies. The data show that the complexes have composition of [ML]X type. The UV-Vis., magnetic susceptibility and ESR spectral data of the complexes suggest a square-planar geometry around the central metal ion except for VO(IV) complex which has square-pyramidal geometry. The redox behavior of copper and vanadyl complexes were studied by cyclic voltammetry. The antimicrobial screening tests were also recorded and gave good results in the presence of metal ion in the ligand system. The nuclease activity of the above metal complexes shows that the copper and nickel complexes cleave DNA through redox chemistry, whereas other complexes are not effective.     

Chemiluminescent flow-through sensor for 1,10-phenanthroline based on the combination of molecular imprinting and chemiluminescence.

A functional polymer for the catalysis of the chemiluminescent reaction and molecular recognition ability of 1,10-phenanthroline was prepared based on the molecular imprinting method. The structural and catalytic roles of transition metal ion interactions were applied in the material design. A ternary complex, 4-vinylpyridine-Cu(II)-1,10-phenanthroline (2:1:1), was synthesized and used as a functional monomer. The ligand 1,10-phenanthroline in the ternary complex was the template used to form the molecularly imprinted polymer. Another monomer, styrene, and the cross-linking reagent divinylbenzene were copolymerized with the ternary complex. The polymer containing the ternary complex is an efficient catalyst for the decomposition of hydrogen peroxide. During the hydrogen peroxide decomposition, superoxide radical ion is formed, which reacts with 1,10-phenanthroline and gives a chemiluminescent emission. The 1,10-phenanthroline was destroyed during the chemiluminescent reaction, leaving a cavity and copper binding sites for another 1,10-phenanthroline molecule. The prepared polymer particles were packed into a glass tube and developed as a molecular recognition chemiluminescent flow-through sensor for 1,10-phenanthroline. The sensitivity and selectivity of the sensor were tested.     

Synthesis,spectral, and biological studies of transition metal chelates of N-[1-(3-aminopropyl)imidazole]salicylaldimine

Tridentate chelate complexes M[LX?·?2H₂O], where M?=?Co(II), Ni(II), Cu(II), Zn(II), and Cd(II) have been synthesized from the Schiff base L?=?N-[1-(3-aminopropyl)imidazole]salicylaldimine and X?=?Cl. Microanalytical data, UV-Vis, magnetic susceptibility, IR, ¹H-NMR, mass, and EPR techniques were used to confirm the structures. Electronic absorption spectra and magnetic susceptibility measurements suggest square-planar geometry for copper complex and octahedral for other metal complexes. EPR spectra of copper(II) complex recorded at 300?K confirm the distorted square-planar geometry of the copper(II) complex. Biological activities of the ligand and metal complexes have been studied on Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans by the well diffusion method. The activity data show the metal complexes to be more potent than the parent ligand against two bacterial species and one fungus. The electrochemical behavior of the copper complex was studied by cyclic voltammetry.     

Synthesis and properties of a redox active ligand with bispicorylamino groups and its dinuclear complex

A ligand, 4-methoxy-4′,4″-bis[N,N-bis(2-pyridylmethyl) aminomethyl]triphenyl-amine, and its palladium and copper dinuclear complexes were designed and prepared in order to examine intramolecular interactions between an organic cation radical and the metal ion. Novel NMR techniques, COSY and NOESY, were applied to the palladium complex to examine its conformation in solution. The palladium complex was found to prefer a folded conformation at ambient temperature, indicating the occurrence of intramolecular stacking interaction. CV measurements of the copper complex showed reversible Cu^I/Cu^II and TPA/TPA⁺ redox couples. The spin–spin interaction in the radical pendant copper complex generated upon one electron oxidation of the copper complex was examined by cw-ESR measurements.     

Metal complexes of a homopolymer system containing diethanolamine side group: synthesis and dielectrical behaviors

In this work, 4-diethanolaminomethyl styrene (DEAMSt) monomer was prepared by modification of 4-chloromethyl styrene with diethanolamine. The homopolymerization of styrene modificated was carried out by free radical polymerization method at 60?°C in presence of 1,4-dioxane and AIBN. The metal complexes were prepared by reaction of the homopolymer used as ligand P(DEAMSt)L^l and Ni(II), Co(II) metal ions in presence of ethanol and dilute NaOH at 65?°C for 48?h in pH 6.

The structure of modificated monomer, homopolymer used as ligand and polymer-metal complexes were characterized by (FT-IR), ¹H-NMR, ¹³C-NMR, Raman spectroscopy tecniques, elemental analysis, SEM, XRD and magnetic measurements. Their geometric structures according to magnetic measurements of Co(II) and Ni(II) complexes were estimated that have a tetrahedral structure. P(DEAMSt)L^l polymer has a transition state between amorphous and crystalline, whereas metal complexes (Co(II) and Ni(II) are with a large crystal structure. The molecular weight of P(DEAMSt)L¹ homopolymer was determined by gel permeation chromatography (GPC). The glass transition temperature (Tg) of homopolymer was measured by differantial scanning calorimeter (DSC). The thermal behaviors of both ligand and polymer-metal complexes were investigated by thermogravimetric analysis (TGA) and (DTA). The results obtained were compared with each other. Then, the dielectrical measurements (dielectric constant, dielectric loss and conductivity) of the ligand and polymer-metal complexes were investigated as a function of temperature and frequency. The activation energies (Ea) of the ligand and metal complexes were determined from the conductivity measurements.     

Spectral,biological screening,and DNA studies of metal chelates of 4-[N,N-bis-(3,5-dimethyl-pyrazolyl-1-methyl)]aminoantipyrine

Tridentate chelate complexes of Co(II), Ni(II), and Cu(II) have been synthesized from 4-[N,N-bis-(3,5-dimethyl-pyrazolyl-1-methyl)]aminoantipyrine. Microanalytical data, UV-Vis, magnetic susceptibility, Infrared, ¹H- ¹³C-NMR, mass, thermal gravimetric analysis and electron paramagnetic resonance (EPR) techniques were used to confirm the structures. The electronic absorption spectra and magnetic susceptibility measurements suggest a distorted octahedral geometry for the metal. EPR spectra of the copper(II) complex at 77?K confirm the distorted octahedral geometry of the copper(II) complex. The antimicrobial activities of the ligand and metal complexes against the bacteria such as Xanthomonas maltophilia, Chromobacterium violaceum, Acinetobacter, Staphylococci, Streptococci, and the fungus Candida albicans have been carried out. A comparative study of minimum inhibitory concentration values of the ligand and its metal complexes indicates that metal complexes exhibit higher antibacterial and antifungal activity than the free ligand. The electrochemical behavior of copper(II) complex was studied by cyclic voltammetry. The complexes show nuclease activity in the presence of oxidant.     

Evolution of iron catalysts for effective living radical polymerization: P–N chelate ligand for enhancement of catalytic performances

Iron catalysts were evolved for more active transition metal‐catalyzed living radical polymerization through design of the ligands. In situ introduction of P–N chelate‐ligands, consisting of hetero‐coordinating atoms [phosphine (P) and nitrogene (N)], onto FeBr₂ effectively catalyzed living radical polymerization of methyl methacrylate (MMA) in conjunction with a bromide initiator, where the monomer‐conversion reached over 90% without dropping the rates and the molecular weights of obtained PMMAs were well controlled. The benign effects of the “hetero‐chelation” were demonstrated by comparative experiments with homo‐chelate ligands (P–P, N–N), model compounds of the composed coordination site, and the combinations. We successfully achieved an isolation of iron complex with a P–N ligand [FeBr₂(DMDPE); DMDPE: (R)‐N,N‐dimethyl‐1‐(2‐(diphenylphosphino)phenyl)‐ethanamine], which was superior to the conventional catalyst [FeBr₂(Pn‐Bu)₂] with respect to controllability and activity, especially at the latter stage. The catalyst was almost quantitatively removed by water washing after polymerization. It was also effective for living polymerization of styrene. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6819–6827, 2008     

Cobalt complex bearing β‐ketoamine ligand: syntheses,structure, catalytic behavior for styrene and methyl methacrylate polymerization

Cobalt complex based on β‐ketoamine ligand [(Z)‐4‐((2,5‐dimethylphenylamino) (phenyl)methylene)‐3‐methyl‐1‐phenyl‐1H‐pyrazol‐5(4H)‐one] was successfully synthesized. The produced catalyst showed satisfactory activities in the cobalt‐mediated radical polymerization of styrene and methyl methacrylate with the common initiator of AIBN. The resulting polymerizations have the characteristics of living radical polymerization and displayed a nearly linear correlation between the number‐average molecular weight and monomer conversion. Low polydispersity was obtained for all polymerizations, and the polydispersity index decreased with the increase of conversion. These improvements facilitate the implementation of styrene and methacrylate cobalt‐mediated radical polymerization, and open the door to the scale‐up of the process. Copyright © 2014 John Wiley & Sons, Ltd.     

Design, synthesis, spectroscopic characterization, biological screening, and DNA nuclease activity of transition metal complexes derived from a tridentate Schiff base

A new series of transition metal complexes of Cu(II), Ni(II), Co(II), Mn(II), Zn(II), Cd(II), Hg(II), and VO(IV) have been designed and synthesized from the Schiff base derived from cinnamidene-4-aminoantipyrine and 2-aminophenol by involving the carbonyl group of 4-aminoantipyrine. The structural features have been arrived from their elemental analyses, magnetic susceptibility, molar conduction, FAB mass, IR, UV-Vis, ¹H NMR and ESR spectral studies. The data show that the complexes have composition of the ML₂ type. The UV-Vis, magnetic susceptibility, and ESR spectral data of the complexes suggest an octahedral geometry around the central metal ion except the VO(IV) complex, which has a square-pyramidal geometry. The redox behavior of the copper and vanadyl complexes has been studied by cyclic voltammetry. The antimicrobial activity of the ligand and its complexes has been extensively studied on microorganisms such as Salmonella typhi, Staphylococcus aureus, Escherichia coli, Bacillus subtilis, Aspergillus niger, and Rhizoctonia bataicola. It has been found that most of the complexes have higher activities than that of the free ligand. The nuclease activity of the above metal complexes shows that the complexes cleave DNA through redox chemistry. In the presence of H₂O₂, the complexes are capable of cleaving calf thymus DNA. The text was submitted by the authors in English.     

Cyclodextrins in polymer synthesis: polymerization of methyl methacrylate under atom‐transfer conditions (ATRP) in aqueous solution

Host guest complexes of methyl methacrylate (MMA) and randomly methylated β‐cyclodextrin (m‐β‐CD, 1 a ) were polymerized in aqueous medium using atom‐transfer radical polymerization. Ethyl 2‐bromoisobutyrate (EBIB) was used as an initiator, copper(I) bromide as the catalyst, and bipyridine (bipy) or 4,4′‐di‐(5‐nonyl)‐2,2´‐bipyridine (dNbipy) as ligands. The unthreading of m‐β‐CD during the polymerization led to water‐insoluble poly(methyl methacrylate) (PMMA). It was found that using dNbipy resulted in higher monomer conversion than using bipy as the ligand under similar conditions. Furthermore, it is shown that the polymerization of MMA under these conditions has a living character. The polymers obtained have a much lower polydispersity than those obtained from conventional free‐radical polymerization. Also, the block copolymerization of PMMA bearing a bromoester end group with CD‐complexed styrene ( 2 a ) was carried out under ATRP conditions in aqueous medium.     

Synthesis of methyl acrylate graft copolymers by the combination of a polynorbornene containing pendant vinylbenzene groups by using coordination and reverse atom transfer polymerization

Copolymerization of norbornene and 1,4‐divinylbenzene was successfully performed using a β‐ketoamine chelate nickel complex–methylaluminoxane, yielding random copolymer of norbornene and 1,4‐divinylbenzene containing a few pendant styrene groups. With the initiation of copper dichloride and 2,2′‐azobisisobutyronitrile, the pendant styrene groups were quantitatively polymerized with methyl acrylates, which allowed the successful synthesis of polynorbornene‐based graft copolymers by reverse atom transfer radical polymerization mechanism. The analyses of the product by ¹H NMR and gel permeation chromatography gave the verification of ‘true’ copolymer. The thermal property of the graft copolymer was controlled by varying the monomer feed ratio. Copyright © 2008 John Wiley & Sons, Ltd.     

Rhodium complexes with a new chiral nitrogen‐containing BINOL‐based diphosphite or phosphonite ligand: synthesis and application to hydroformylation of styrene and/or hydrogenation of prochiral olefins

Two new cationic rhodium(I) complexes with a chiral nitrogen‐containing BINOL‐based diphosphite or phosphonite ligand have been synthesized. Chiral diphosphite was prepared by the reaction of N‐phenyldiethanolamine with two equivalents of [(R)‐(1,1′‐binaphthalene‐2,2′‐diyl)]chlorophosphite. In its rhodium complex the ligand is bound to the metal via both phosphorus atoms, and a Rh–N interaction is also possible. Synthesis of the chiral phosphonite was achieved by the reaction of 2‐(N,N‐dimethylaminophenyl)‐bis(diethylamino)phosphine with one equivalent of R‐BINOL. In its rhodium complex, the ligand is P,N‐bonded, forming a five‐membered chelate ring. The first complex was applied to hydroformylation of styrene and displayed high activity and chemo‐ and regioselectivity, but unfortunately no asymmetric induction was found. Both complexes were evaluated in the hydrogenation of prochiral olefins with moderate activities and low enantioselectivities. Copyright © 2005 John Wiley & Sons, Ltd.     

Crystal structures of triazine-3-thione derivatives by reaction with copper and cobalt salts

The reaction of 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]triazine-3-thione L1H2OCH3 with copper(II) chloride leads to the formation of an organic molecule L2 containing two triazine rings linked by a new S-S bond. A binuclear copper(II) complex, 1, containing L1 is also isolated. The reaction of L1H2OCH3 with copper(I) chloride yields a hexanuclear cluster of copper(I), 2, in which the copper atoms form a distorted octahedron with the ligand L1 acting as an NS chelate and sulfur bridge, giving to the copper ion a trigonal geometry by one N and two S atoms. In any reaction of the disulfide L2 with metal salts, complexes containing this molecule are isolated. Reactions with copper(I) and copper(II) chloride and nickel(II) and cadmium(II) nitrate produce the S-S bond cleavage, giving complexes containing the triazine L1 behaving as the NS anion, which show spectroscopic characteristics identical with those formed by reaction with L1H2OCH3. However, the reaction with cobalt(II) nitrate gives a low-spin octahedral cobalt(III) complex, in which an asymmetric rupture of the disulfide L2 has been produced, giving an unexpected complex with a new ligand and keeping the S-S bond.     

η5-cyclopentadienyl-η2-styrenedicarbonylmanganese for initiation of free-radical polymerization of vinyl monomers

The polymerization of styrene, methyl methacrylate, and vinyl chloride catalyzed by η⁵-cyclopentadienyl-η²-styrenedicarbonylmanganese is studied. It is shown that the cyclopentadienyl complex of manganese containing the monomer ligand (styrene) in the coordination sphere can initiate the radical polymerization of vinyl monomers in a mild temperature range. On the basis of the experimental data and the quantum-chemical simulation of the initial stages of the process, schemes describing the initiation of polymerization under the action of the complex under study and the binary initiating system containing carbon tetrachloride are advanced. In the latter case, additional acceleration of the reaction is related to the interaction of carbon tetrachloride with the triplet form of the manganese complex that yields trichloromethyl radicals initiating polymerization.     

Controlled radical polymerization catalyzed by copper(I)–sparteine complexes

Sparteine was found to be an efficient ligand because when complexed with copper(I) halide it generated a homogeneous catalyst for the atom transfer radical polymerization of styrene or methyl methacrylate, which was initiated by (1-bromoethyl)benzene in the former case and by p-toluenesulfonyl chloride in the latter. The plots of ln([M]₀/[M]) versus time and molecular weight versus monomer conversion exhibited linear dependencies, which indicated that the concentration of the living centers throughout polymerization was constant. The polydispersities of polystyrene and poly(methyl methacrylate) in both the bulk and solution polymerizations were quite low. An induction time was observed during the bulk polymerization of styrene; however, it was absent during the solution polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4191–4197, 1999     

Cope elimination and complexation of poly(dimethylaminoethyl methacrylate N-oxide)

Poly(dimethylaminoethyl methacrylate N-oxide) (poly(DMAEMNO)) was prepared by oxidation of poly(dimethylaminoethyl methacrylate) with hydrogen peroxide in methanol. From thermogravimetric and IR spectroscopic investigations Cope elimination of amine oxide group in poly(DMAENO) was found to occur at 120–150°C. The postpolymerization of partially pyrolyzed polymer carrying vinyl ester group as pendant was performed with azobisisobutyronitrile at 60°C in methanol to give cross-linked polymer that was found to form hydrogel. Poly(DMAEMNO) gave metal–polymer complexes with CuCl₂, ZnCl₂, and CoCl₂. Cobalt–polymer complex had a constitution of 1:2 of metal ion to amine oxide group, while copper– and zinc–polymer complexes seemed to have structures of 1:1 and 1:2 of metal ion to amine oxide group. Furthermore, polymer complexes of poly(DMAEMNO) with poly(methacrylic acid) and poly(acrylic acid) were found to be formed by mixing aqueous solutions of both polymers and also by radical polymerization of the acid monomers in the presence of poly(DMAEMNO). From elemental analysis, thermogravimetric investigation, and measurement of turbidity it was concluded that the resulting polymer–polymer complexes contained more than one acid monomer unit per one N-oxide unit.     

Living radical emulsion polymerization using the nanoprecipitation technique: An extension to atom transfer radical polymerization

Living radical polymerizations of styrene were performed under emulsion atom transfer radical polymerization conditions with latexes prepared by a nanoprecipitation technique recently developed for the stable free‐radical polymerization process. Latexes were prepared by the precipitation of a solution of low‐molecular‐weight polystyrene in acetone into a solution of a surfactant in water. The resulting particles were swollen with styrene and then heated. The effects of various surfactants and hydrophobic ligands, the reaction temperature, and the ligand/copper(I) bromide ratio were studied. The best results were obtained with the nonionic surfactant Brij 98 in combination with the hydrophobic ligand N,N‐bis(2‐pyridylmethyl)octadecylamine and a ligand/copper(I) bromide ratio of 1.5 at a reaction temperature of 85–90 °C. Under these conditions, latexes with good colloidal stability with average particle diameters of 200 nm were obtained. The molecular weight distributions of the polystyrenes were narrow, although the experimental molecular weights were slightly larger than the theoretical ones because not all the macroinitiator appeared to reinitiate. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4027–4038, 2006