Non-covalent interactions of alkali metal cations with singly charged tryptic peptides

The complexes formed by alkali metal cations (Cat(+) = Li(+), Na(+), K(+), Rb(+)) and singly charged tryptic peptides were investigated by combining results from the low-energy collision-induced dissociation (CID) and ion mobility experiments with molecular dynamics and density functional theory calculations. The structure and reactivity of [M + H + Cat](2+) tryptic peptides is greatly influenced by charge repulsion as well as the ability of the peptide to solvate charge points. Charge separation between fragment ions occurs upon dissociation, i.e. b ions tend to be alkali metal cationised while y ions are protonated, suggesting the location of the cation towards the peptide N-terminus. The low-energy dissociation channels were found to be strongly dependant on the cation size. Complexes containing smaller cations (Li(+) or Na(+)) dissociate predominantly by sequence-specific cleavages, whereas the main process for complexes containing larger cations (Rb(+)) is cation expulsion and formation of [M + H](+). The obtained structural data might suggest a relationship between the peptide primary structure and the nature of the cation coordination shell. Peptides with a significant number of side chain carbonyl oxygens provide good charge solvation without the need for involving peptide bond carbonyl groups and thus forming a tight globular structure. However, due to the lack of the conformational flexibility which would allow effective solvation of both charges (the cation and the proton) peptides with seven or less amino acids are unable to form sufficiently abundant [M + H + Cat](2+) ion. Finally, the fact that [M + H + Cat](2+) peptides dissociate similarly as [M + H](+) (via sequence-specific cleavages, however, with the additional formation of alkali metal cationised b ions) offers a way for generating the low-energy CID spectra of 'singly charged' tryptic peptides.     

The effect of metallic cations on the electrophoretic properties of a pretreatedHevea latex

High-ammonia latex concentrate prepared from doubly-centrifuged fieldHevea latex was exhaustively dialysed to remove any residual water-soluble non-rubber constituents. The electrophoretic mobilities of the dialysed latex in the presence of various metallic cations were investigated as a function of electrolyte concentration. The mobility decreased with increasing concentration of the cations Na⁺, Ba²⁺, Mg²⁺ and Ca²⁺ in a manner consistent with the effect of simple electrolyte on compression of the electric double layer. Anomalous behaviour was noted for the divalent ion copper, in that it reversed the charge of the latex particles at a concentration even lower than that of uranyl ions. Multivalent cations (lanthanum, cerium and thorium) had a profound influence on the latex particles where very low charge reversal concentrations were observed. It is believed that strong adsorption of hydrolysed species from the metallic ions was responsible for reversing the charge of the originally negative latex particles. These experiments indicated that the efficiency with which the cations reversed the charge of the latex particle surface was in the order: lanthanum > cerium > copper > thorium > uranyl > calcium > magnesium > barium > sodium. The number of cation binding sites on the latex particle surface and the chemical free energies of cation adsorption were calculated. It was found that the interaction of the latex particle with the hydrolysable metallic cations was much more stronger than that with the simple divalent cations and that this intercation was comparable to that of biological surfaces.     

The Separation of Organic Analyte Cations on a Low-Capacity Cation Exchange Column Using Indirect UV Detection

Abstract

The retention of organic analyte cations on a low-capacity cation exchange column using indirect UV detection was studied. It was found that a combination of cation exchange/reversed-phase interactions affected the retention of organic analyte cations provided the analytes have both a cationic charge site and a hydrophobic center. The factors that influenced the organic analyte cation retention were: concentration of organic modifier, concentration of UV absorbing analyte, pH, and mobile phase ionic strength. Elution orders for several of the organic analytes studied on the low-capacity cation exchange column were different than those observed on silica-based strong cation exchange columns.     

Ion exchange as a simple and effective tool for screening possible cation conductors

Although kinetics of the low-temperature cation exchange in mixed oxide materials (aluminates, gallates, titanates, niobates, tantalates, antimonates, phosphates etc.) cannot provide quantitative information on self-diffusion and ionic conductivity in the starting material due to the mixed cation effect, it is the most direct and simple qualitative indication of the cation mobility in the solid state. It does not need using ceramics and single crystals and thus represents a useful tool for rapid selection of prospective cation conductors for subsequent detailed studies of dense samples with electrical methods. Examples of solid electrolytes discovered owing to their ion-exchange properties are reviewed, and rational principles of the ion-exchange testing are discussed. Laws of ion-exchange equilibria are based on ionic size compliance and the principle of hard and soft acids and bases. The former is most important for alkali/alkali exchange and the latter for exchanging cations of similar size but having different electronic structures: those of the rare-gas type and those having 18- or 18 + 2-electron shells, like Na⁺ and Ag⁺ or K⁺ and Tl⁺. Ion-exchange testing is especially useful for structures with non-intersecting conduction paths. It is shown that the resistivity of crystals with non-parallel and non-intersecting conduction paths cannot be described by the classical tensor formalism. Significant differences between isotope exchange, chemical ion exchange and ion conduction, quasi-one-dimensional and true one-dimensional conductors and single- and multiple-barrelled non-intersecting channels are disclosed and discussed.     

Ion‐Pairing Assemblies Based on Pentacyano‐Substituted Cyclopentadienide as a π‐Electronic Anion

Pentacyanocyclopentadienide (PCCp^?), a stable π‐electronic anion, provided various ion‐pairing assemblies in combination with various cations. PCCp^?‐based assemblies exist as single crystals and mesophases owing to interionic interactions with π‐electronic and aliphatic cations with a variety of geometries, substituents, and electronic structures. Single‐crystal X‐ray analysis revealed that PCCp^? formed cation‐dependent arrangements with contributions from charge‐by‐charge and charge‐segregated assembly modes for ion pairs with π‐electronic and aliphatic cations, respectively. Furthermore, some aliphatic cations gave dimension‐controlled organized structures with PCCp^?, as observed in the mesophases, for which synchrotron XRD analysis suggested the formation of charge‐segregated modes. Noncontact evaluation of conductivity for (C₁₂H₂₅)₃MeN⁺ ? PCCp^? films revealed potential hole‐transporting properties, yielding a local‐scale hole mobility of 0.4 cm² V^?1 s^?1 at semiconductor–insulator interfaces.     

Polarizability and inductive effect contributions to solvent–cation binding observed in electrospray ionization mass spectrometry

Electrospray ionization (ESI) mass spectrometry (MS) has been used in conjunction with computer modeling to investigate binding tendencies of alkali metal cations to low molecular weight solvents. Intensities of peaks in ESI mass spectra corresponding to solvent-bound alkali metal cations were found to decrease with increasing ionic radii (Li⁺ > Na⁺ > K⁺ > Cs⁺) in either dimethylacetamide (DMAc) or dimethylformamide (DMF). When a lithium or sodium salt was added to an equimolar mixture of DMF, DMAc, and dimethylpropionamide (DMP), the intensities of gas-phase [solvent + alkali cation]⁺ peaks observed in ESI mass spectra decreased in the order DMP > DMAc ≫ DMF. A parallel ranking was obtained for alkali metal cation affinities in ESI-MS/MS experiments employing the kinetic method. These trends have been attributed to a combination of at least three factors. An inductive effect exhibited by the alkyl group adjacent to the carbonyl function on each solvent contributes through-bond electron donation to stabilize the alkali metal cation attached to the carbonyl oxygen. The shift in the partial negative charge at the oxygen binding site with increasing n-alkyl chain length (evaluated via computer modeling), however, cannot fully account for the mass spectrometric data. The increasing polarizability and the augmented ability to dissipate thermal energy with increasing size of the solvent molecule are postulated to act in conjunction with the inductive effect. Further evidence of these contributions to solvent–cation binding in ESI-MS is given by the relative intensities of [solvent + Li]⁺ peaks in mixtures containing equimolar quantities of alcohols, indicating preferential solvation of Li⁺ in the order n-propanol > ethanol > methanol. These experiments suggest a combined role of polarizability, the inductive effect, and solvent molecule size in determining relative intensities of solvated cation peaks in ESI mass spectra of equimolar mixtures of homologous solvents.     

Copolymerization of methacrylic acid alkali metal salts and polyether-containing monomers in solid polymer electrolytes

Copolymerization of methacrylic acid alkali metal salts (MAAM; M = Li, Na, K, Rb or Cs) and oligo(oxyethylene) methacrylate (MEO) was carried out in bulk or in poly(oligo(oxyethylene) methacrylate) (PMEO) at 60°C. The copolymers of MAAM and MEO which were obtained by bulk polymerization showed a cation conductivity of around 1 × 10^?7 S/cm at room temperature. On the other hand, the copolymers obtained by radical polymerization in PMEO, showed a higher cation conductivity (10^?6–10^?5 S/cm). Furthermore, higher cation conductivity was observed for the copolymer systems containing alkali metal cations with a larger ion radius. This tendency was explained by the strength of the bond between alkali metal cation and ether oxygens. The degree of dissociation had little effect on this difference in the conductivity. The effective dissociation of methacrylic salts was enhanced in the copolymer compared to the homopolymer because of the suppression of the adjacent dissociative carboxylic acid groups. Arrhenius plots for ionic conductivity show the migration of ions along with the segmental motion of the polymer matrix.     

Optimizing the electrochemical performance of imidazolium‐based polymeric ionic liquids by varying tethering groups

We report the synthesis and characterization of a series of novel imidazolium cation and bis(trifluoromethane)sulfonimide anion (TFSI^?)‐based ionic liquid (IL) model compounds and their corresponding polymeric ionic liquids (PILs) with various tethering groups. Ethylene oxide repeating units were attached as tethering groups to an imidazolium cation to optimize the glass transition temperatures (T_g) and ionic conductivities of the PILs. The novel PILs exhibit excellent conductivity values of around 8 × 10^?4 S/cm at room temperature. The thermophysical and electrochemical properties of ILs, including thermal transition, ionic conductivity, and rheological behavior, were characterized to investigate the effect of tethering groups. We conclude that the length of poly(ethylene oxide) tethering group has a tremendous effect on both physical property and electrochemical behavior and that charge carrier density is dominant in defining ionic conductivity with free ILs, whereas ion mobility plays a more important role after polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1339–1350     

The effect of cation size (H+, Li+, Na+, and K+) on McLafferty-type rearrangement of even-electron ions in mass spectrometry

Protonation and alkali-metal cation adduction are the most important ionization processes in soft-ionization mass spectrometry.Studies on the fragmentation mechanism of protonated and alkali-metal-cationized compounds in tandem mass spectrometry are essential and helpful for structural analysis.In some cases,it was often observed that a compound attached by different alkali-metal cations(or proton)exhibits similar fragmentation patterns but the relative abundances of product ions are different.This difference was considered to derive from the different electrostatic interactions of alkali-metal cations(or the bonded effect of proton)with the analyte.The alkali-metal cation with a smaller ionic radius shows stronger electrostatic interaction with the molecule because of its higher charge density.In addition,the bonded effect of the proton is stronger than the electrostatic interaction of the alkali-metal cation.In the present study,which used McLafferty-type rearrangements of even-electron ions([M+Cat]+,Cat=H,Li,Na,K)as model reactions,the effect of cation size in mass spectrometric fragmentation reactions is highlighted.These considerations were also successfully applied to interpret the similar but distinct fragmentation behavior of proton and alkali-metal cation adducts of a synthetic compound(2-(acetamido(phenyl)methyl)-3-oxobutanoate)and a drug(entecavir).     

Thermal characterization of Flemion® membranes substituted by alkali metal cations

The thermal behavior of perfluorosulfonated membranes of three equivalent mass (EW=910, 1000 and 1100 g eq⁻¹) has been studied for membranes in acid form and in the alkali metal countercations substituted samples. The water contents of the membranes decrease progressively with increasing EW and the countercations charge density. The monovalent cations substitutions increase the membranes thermal stability. DSC curves show a single endothermic peak around 120°C that give low peak temperature for low EW and high peak temperature for large cations size. The membrane mechanical properties changed for different EW and temperatures of membranes. Stress-strain analysis showed that K⁺ substituted membranes at both temperatures present a highest YM compared to the other alkali cation substitutions. The thermal properties of perfluorosulfonated membranes depend on the water contents, cation size, temperature and also on EW value.     

Capillary electrophoresis analysis of inorganic cations in post-blast residue extracts applying a guanidinium-based electrolyte and bilayer-coated capillaries

A new CE method was developed for the identification and quantitation of inorganic cations in post‐blast residues. The simultaneous analysis in 20 min total runtime of eight cations in post‐blast residues (ammonium, potassium, monomethylammonium, calcium, sodium, magnesium, strontium), plus lithium cation as the internal reference, was carried out with a BGE involving a non‐CMR (carcinogenic, mutagenic, and harmful to reproduction) chromophore (guanidinium cation) and a double‐layer modified capillary (hexadimethrine bromide/polyvinylsulfonate). A study of UV detection conditions using guanidinium ion as the probe led us to set the analysis and reference wavelengths and their associated bandwidths as well as the probe concentration fixed at 15 mM. The successive multiple ionic‐polymer layer approach limited the cation adsorption on capillary wall and improved the EOF stability. These caused a significant improvement in method repeatability. Intermediate precisions were 2.4% for corrected areas and 1.3% for normalized migration times. Limits of detection close to 1 mg/L for all cations were obtained. The matrix effects were studied with chemometric approach for different matrices representative of those collected after explosion. Tests with blank matrix extracts of soil, cloth, and with simulated matrix extract containing 800 mg/L Ca²⁺ and 500 mg/L Fe²⁺ were carried out and no significant matrix effects were observed. Finally, analyses of real residues collected after cash dispenser and homemade firework explosions demonstrate excellent correlation between the CE results and those obtained with the ion chromatography method used routinely.     

Electrophoresis versus electrochromatography

In separation techniques, such as Liquid Chromatography and Capillary Zone Electrophoresis, separation is performed on the basis of differences in velocity of the various separands, making use of differences in k′ and/or effective mobility. While in chromatography the flow of the eluent is elementary, in electrophoretic techniques the electroosmotic flow is generally suppressed in order to avoid disturbing of the sample zone boundaries, which migrate with a maximal velocity of 10^?3 m s^?1. This holds especially for isotachophoretic separations, where separands migrate in consecutive zones with minimal detectable lengths of about 0.1 mm. If electroosmotic flow is applied as a transport mechanism, using capillaries as small as about 50 μm, linear velocities of the liquid flow can reach about 2 × 10^?3 m s^?1. Especially for ionic species with a low effective mobility, this velocity can be a multiple of the electrophoretic migration velocity in the separation compartment. Therefore, anionic, non-ionic, and cationic separands can migrate in the same direction. Depending on whether repulsive or attractive forces are operative, the electrophoretic separation power can be counteracted or favored. The separation mechanisms making use of (quasi)stationary phases are studied. Plotting the chromatographic behavior versus the electrophoretic shows transition areas to exist between the “purely” electrophoretic techniques and the “purely” chromatographic techniques. It must be stated that most of the recent publications in CZE, especially those with very narrow bore capillaries, can be allocated to the transition areas, sometimes with a strong chromatographic retention component.     

Analysis of Morpholinium Ionic Liquid Cations by Hydrophilic Interaction Columns Coupled with Indirect UV Detection

A method was developed for the separation and detection of morpholinium ionic liquid cations by hydrophilic interaction column combined with indirect ultraviolet detection using imidazolium ionic liquids as ultraviolet absorbents in high‐performance liquid chromatography. The effects of the ultraviolet absorbents, organic solvents, and the pH value of the aqueous solution in the mobile phase for the determination of morpholinium cations were investigated by using a hydrophilic column with carbamoyl group as the analytical column. The retention and detection behavior of morpholinium cations was discussed. The suitable chromatographic conditions were 0.8 mmol/L 1‐ethyl‐3‐methyl‐imidazolium tetrafluoroborate aqueous solution (pH 3.5 adjusted with acetic acid)/acetonitrile (45/55, v/v) as the mobile phase and a detection wavelength of 210 nm. Under these conditions, the baseline separation of N‐methyl‐N‐ethyl‐morpholinium cation ([MEMo]⁺) and N‐methyl‐N‐propyl‐morpholinium cation ([MPMo]⁺) was successfully achieved in 15 min. The detection limits of [MEMo]⁺ and [MPMo]⁺ were 0.595 and 0.531 mg/L, respectively. Relative standard deviations were less than 0.2%. This method has been successfully applied to the analysis of morpholinium ionic liquid samples synthesized in chemical laboratories, which is simple, reliable, and practical.     

Separation of different ion structures in atmospheric pressure photoionization-ion mobility spectrometry-mass spectrometry (APPI-IMS-MS)

This study demonstrates how positive ion atmospheric pressure photoionization-ion mobility spectrometry-mass spectrometry (APPI-IMS-MS) can be used to produce different ionic forms of an analy te and how these can be separated. When hexane:toluene (9:1) is used as a solvent, 2,6-di-tert-butylpyridine (2,6-DtBPyr) and 2,6-di-tert-4-methylpyridine (2,6-DtB-4-MPyr) efficiently produce radical cations [M]⁺ and protonated [M + H]⁺ molecules, whereas, when the sample solvent is hexane, protonated molecules are mainly formed. Interestingly, radical cations drift slower in the drift tube than the protonated molecules. It was observed that an oxygen adduct ion, [M + O₂]⁺, which was clearly seen in the mass spectra for hexane:toluene (9:1) solutions, shares the same mobility with radical cations, [M]⁺. Therefore, the observed mobility order is most likely explained by oxygen adduct formation, i.e., the radical cation forrning a heavier adduct. For pyridine and 2-tert-butylpyridine, only protonated molecules could be efficiently formed in the conditions used. For 1- and 2-naphthol it was observed that in hexane the protonated molecule typically had a higher intensity than the radical cation, whereas in hexane:toluene (9:1) the radical cation [M]⁺ typically had a higher intensity than the protonated molecule [M + H]⁺. Interestingly, the latter drifts slower than the radical cation [M]⁺, which is the opposite of the drift pattern seen for 2,6-DtBPyr and 2,6-DtB-4-MPyr.     

Cyanine‐Like Dyes with Large Bond‐Length Alternation

Herein, the synthesis and properties of alkyne‐bridged carbocations, which are analogous in structure to cyanine dyes, are reported. An alkene‐bridged dye, linked at the third position of the indole, was also synthesized as a reference compound. These new carbocations are stable under ambient conditions, allowing characterization by UV/Vis and NMR (¹H and ¹³C) spectroscopies. These techniques revealed a large degree of delocalization of the positive charge, similar to a previously reported porphyrin carbocation. The linear and nonlinear optical properties are compared with cyanine dyes and triarylmethyl cations, to investigate the effects of the bond‐length alternation and the overall molecular geometry. The value of Re(γ), the real part of the third‐order microscopic polarizability, of ?1.3×10^?33 esu for the alkyne‐linked cation is comparable to that of a cyanine dye of similar length. Nondegenerate two‐photon absorption spectra showed that the alkene‐bridged dye exhibited characteristics of cyanines, whereas the alkyne‐bridged dye is reminiscent of octupolar chromophores, such as the triarylmethyl carbocation brilliant green. Such attributes were confirmed and rationalized by quantum chemical calculations.     

Indirect ultraviolet detection of alkaline earth metal ions using an imidazolium ionic liquid as an ultraviolet absorption reagent in ion chromatography

A convenient and versatile method was developed for the separation and detection of alkaline earth metal ions by ion chromatography with indirect UV detection. The chromatographic separation of Mg²⁺, Ca²⁺, and Sr²⁺ was performed on a carboxylic acid base cation exchange column using imidazolium ionic liquid/acid as the mobile phase, in which the imidazolium ionic liquid acted as an UV‐absorption reagent. The effects of imidazolium ionic liquids, detection wavelength, acids in the mobile phase, and column temperature on the retention of Mg²⁺, Ca²⁺, and Sr²⁺ were investigated. The main factors influencing the separation and detection were the background UV absorption reagent and the concentration of hydrogen ion in ion chromatography with indirect UV detection. The successful separation and detection of Mg²⁺, Ca²⁺, and Sr²⁺ within 14 min were achieved using the selected chromatographic conditions, and the detection limits (S /N = 3) were 0.06, 0.12, and 0.23 mg/L, respectively. A new separation and detection method of alkaline earth metal ions by ion chromatography with indirect UV detection was developed, and the application range of ionic liquids was expanded.     

Mobilization of electroosmotic flow markers in capillary zone electrophoresis

UV-absorbing neutral substances are commonly used as markers of mean electroosmotic flow in capillary electrophoresis for their zero electrophoretic mobility in an electric field. However, some of these markers can interact with background electrolyte components and migrate at a different velocity than the electroosmotic flow. Thus, we tested 11 markers primarily varying in their degree of methylation and type of central atom in combination with five background electrolyte cations differing in their ionic radii and surface charge density, measuring the relative electrophoretic mobility using thiourea as a reference marker. Our results from this set of experiments showed some general trends in the mobilization of the markers based on the effects of marker structure and type of background electrolyte cation on the relative electrophoretic mobility. As an example, the effects of an inadequate choice of marker on analyte identification were illustrated in the electrophoretic separation of glucosinolates. Therefore, our findings may help electrophoretists appropriately select electroosmotic flow markers for various electrophoretic systems.     

Chelating 2,2′-Diaminodiethylamine Cellulose Filters and X-ray Fluorescence for Preconcentration and Trace Analysis of Natural Waters

Abstract

The 2,2′-diaminodiethylamine (DEN) functional group can be expected to have ideal properties for the chelation of transition metals and their collection from aqueous solutions, independent of the alkali and alkaline earth ions concentration. Introducing DEN into cellulose filters allows straightforward preconcentration of trace cations by a simple filtration step, and the DEN-filter constitutes a suitable target for X-ray fluorescence (XRF) analysis. The linearity between the XRF-response on the loaded DEN-filter and the trace cation concentration in the solution appears excellent, up to a total filter capacity of ca. 3 μeq.cm^?2. The detection limits are around 0.5 μg. l^?1 in most practical cases. Accuracy and precision are around 10%. The applicability of the proposed procedure is illustrated on a comparative basis by XRF-analysis of drinking water and surface water, after preconcentration by DEN-filtration and by alternative procedures.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Coexistence of Two Thermally Induced Intramolecular Electron Transfer Processes in a Series of Metal Complexes [M(Cat‐N‐BQ)(Cat‐N‐SQ)]/[M(Cat‐N‐BQ)2] (M=Co,Fe, and Ni) bearing Non‐Innocent Catechol‐Based Ligands: A Combined Experimental and Theoretical Study

The different thermally induced intermolecular electron transfer (IET) processes that can take place in the series of complexes [M(Cat‐N‐BQ)(Cat‐N‐SQ)]/[M(Cat‐N‐BQ)₂], for which M=Co ( 2 ), Fe ( 3 ) and Ni( 4 ), and Cat‐N‐BQ and Cat‐N‐SQ denote the mononegative (Cat‐N‐BQ^?) or dinegative (Cat‐N‐SQ^2?) radical forms of the tridentate Schiff‐base ligand 3,5‐di‐tert‐butyl‐1,2‐quinone‐1‐(2‐hydroxy‐3,5‐di‐tert‐butylphenyl)imine, have been studied by variable‐temperature UV/Vis and NMR spectroscopies. Depending on the metal ion, rather different behaviors are observed. Complex 2 has been found to be one of the few examples so far reported to exhibit the coexistence of two thermally induced electron transfer processes, ligand‐to‐metal (IET^LM) and ligand‐to‐ligand (IET^LL). IET^LL was only found to take place in complex 3 , and no IET was observed for complex 4 . Such experimental studies have been combined with ab initio wavefunction‐based CASSCF/CASPT2 calculations. Such a strategy allows one to solicit selectively the speculated orbitals and to access the ground states and excited‐spin states, as well as charge‐transfer states giving additional information on the different IET processes.