Nitrato- and fluoroboracites M3B7O13NO3 and M3B7O13F

New boracites containing nitrato- or fluoroanions that appear to be true low-pressure phases have been synthesized at superatmospheric pressures. The M₃B₇O₁₃NO₃ compounds (M = Co, Ni, Cu, Zn, Cd) transform rapidly and reversibly in the temperature region 300–500°C between probable orthorhombic and face centered cubic symmetry, while the M₃B₇O₁₃F compounds (M = Mg, Mn, Fe, Co, Zn) appear to maintain rhombohedral symmetry up to their decomposition temperatures of 800–900°C. True high-pressure boracite-like phases containing F and Cr, Mn, Fe, or Co that decompose upon heating to M₃B₇O₁₃F have also been isolated.     

13C13C spin spin coupling constants in azulenes

[4-¹³C]- Azulene and [4-¹³C]-4-methylazulene have been synthesized. The ¹³C¹³C spin coupling constants have been measured and interpreted in terms of πMO theory.     

13C-NMR spectra of fluorinated molecules using 19F-13C polarization transfer

¹³C-NMR spectra of fluorinated molecules are difficult to observe under conventional broad-band proton decoupling. The large coupling constants involved make polarization transfer between fluorine and carbon, using INEPT or DEPT experiments very effective while broad band fluorine decoupling collapses the multiplet pattern.     

Biosynthesis of ravidomycin. Use of 13C-13C double quantum NMR to follow precursor incorporation

A biosynthetic scheme is proposed for the ravidomycin aglycone. Incorporation of ¹³C-labeled precursors was followed by conventional and 2-dimensional NMR techniques.     

Investigation of sesquiterpene lactones by13C NMR spectroscopy. III.13C MNR spectra of artemin and its derivatives

The¹³C NMR spectra obtained under conditions of complete and incomplete decoupling from protons of the sesquiterpene lactone artemin (I), its dihydro derivative (II), and its acetyl derivative (III) have been studied. An assignment has been made of the chemical shifts of all the carbon atoms by comparison of the¹³C NMR spectra of (I), (II), and (III) with one another and also by comparison with literature information.V. L. Komarov Institute of Botany, Academy of Sciences of the AzSSR, Baku, Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 576–578, September–October, 1983.     

The darcpluridata system: the 13C-n.m.r. data bank1

The capabilities of the DARC system are discussed and illustrated by the storage and retrieval functions of the ¹³C-n-m.r. data bank of the DARC PLURIDATA system. The data covered by the bank, as well as the input stream to the bank and validation of the spectra, are described. Particular stress is laid on the DARC structural retrieval system, which illustrates the interactive interrogation of a chemical data bank by means of the structural diagram of a molecule, i.e. the universal language in chemistry. The potential of the ¹³C-n.m.r. data bank in computer-aided structural elucidation is outlined.     

13C-NMR studies of marine natural products II. Total assignment of the 13C-NMR spectrum of asperdiol

¹³C-nmr spectral assignments for asperdiol are made with the aid of model compounds and T₁ relaxation behavior. Overall isotropic tumbling was inferred from the latter providing a supplemental means of multiplicity determination. Utilization of the T₁ relaxation times as an assignment criterion for select resonances in asperdiol is also described.     

Biosynthese de la botryodiplodine,mycotoxine de penicillium roqueforti: Incorporations d'acetate[1-13C], [2-13C], [1-2 13C]et d'acide orsellinique 2-13C-carboxyle 13C], [3-4 13C]

Incorporations of [1-¹³C], [2-¹³C], [1-2¹³C]acetate and [2-¹³C, carboxyl-¹³C], [3-4¹³C]orsellinic acid into botryodiplodin indicate that this mycotoxin is biosynthesized by the polyketide pathway. Orsellinic acid is a precursor of botryodiplodin. A biosynthetic pathway, using orsellinic acid as precursor, is proposed.     

Fourier 13C NMR and PMR including 13C satellites of oriented cyanopropyne

Fourier ¹³C and proton NMR spectra of cyanopropyne partially oriented by a nematic phase have been recorded and interpreted. It is shown that more accurate measurements are obtained much more rapidly by observing ¹³C satellites by Fourier PMR than by direct observation of the ¹³C spectrum. The geometry has been extracted from direct couplings; a small but systematic discrepancy with microwave spectroscopy is observed for the carboncarbon bond lengths.     

Synthesis and nmr analysis of cyclo-[85% 13C-asp]-pro: 13C-13C vicinal coupling constants and conformation

The dipeptide cyclo(Asp-Pro) where the aspartic acid residue was 85% ¹³C enriched, was synthesized with the aim of analyzing its conformation in solution by using ¹C-¹H, ¹³H-¹H and ¹³C-¹³C coupling constant parameters. The values of these couplings agree well with each other and show that the side chain of the aspartic acid residue adopts privileged conformations the proportions of which vary somewhat with pH, and more weakly, with a change in solvent. The ¹³C-¹³C interresidue coupling constants ³J_Cl'–_C2^β and ³J_Cl'–_C2^γ obtained after long accumulation of the signals of unenriched carbons, have different values; they show puckering in the pyrrolidine ring similar to that found in cyclo(Leu-Pro) in the solid state. It was concluded that ¹³C-¹³C coupling constants represent an excellent means of determining the side chain conformation (whenever the incorporation of an enriched amino acid into the peptide is possible) that will find applications particularly in the case of peptides with complicated proton spectra.     

La6Pd13Cd4 and Ce6Pd13Cd4 with palladium-centred rare earth octahedra: synthesis, structure, and chemical bonding

Abstract  

The palladium-rich cadmium compounds La₆Pd₁₃Cd₄ and Ce₆Pd₁₃Cd₄ were synthesized by induction melting the elements in sealed tantalum ampoules and subsequent annealing. They were characterized by X-ray powder and single-crystal diffraction: Na₁₆Ba₆N type, Im[`3] mIm\overline{3} m, a = 988.12(9) pm, wR2 = 0.0463, 225 F ² values, and 12 variables for La₆Pd₁₃Cd₄, and a = 982.1(2) pm, wR2 = 0.0521, 215 F ² values, and 12 variables for Ce₆Pd₁₃Cd₄. The striking structural motifs are palladium-centred La₆ and Ce₆ octahedra, which are packed in a bcc fashion. Further palladium and cadmium atoms built up three-dimensional [Pd₃Cd] networks in which the La₆Pd and Ce₆Pd octahedra are embedded. Chemical bonding analyses show that the dominant interaction occurs within the palladium-centred RE ₆ octahedra, while weaker bonding exists between them.     

碳包覆Na2Ti6O13纳米管的电化学性能研究

以金红石型TiO2和NaOH为原料,由水热反应制备Na2Ti6O13纳米管.然后,在含有0.1 mol.L-1NaOH的葡萄糖水溶液中反应4 h制得碳包覆的Na2Ti6O13纳米管.X射线衍射(XRD)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等分析表明,该碳包覆Na2Ti6O13纳米管外径约14～19 nm,内径约2～5 nm,长度为数百纳米,有一层厚度约为2 nm的碳层包覆在纳米管外壁.以其作为锂离子电池负极材料,恒电流充放电测试表明,在50 mA.g-1电流密度下首周可逆容量达到161 mAh.g-1,循环100周后容量保持在147 mAh.g-1.相比于Na2Ti6O13纳米管,提高了20%以上.电流密度升至1600 mA.g-1充放电,碳包覆Na2Ti6O13纳米管可逆容量仍有70 mAh.g-1左右,远高于Na2Ti6O13纳米管,表现出良好的倍率性能.     

K2Mo4O13 phases prepared by hydrothermal synthesis

Hydrothermal synthesis in the K-Mo oxide system was investigated as a function of the pH of the reaction medium. Four compounds were formed, including two K₂Mo₄O₁₃ phases. One is a new low-temperature polymorph, which crystallizes in the orthorhombic, space group Pbca, with Z=8 and unit cell dimensions a=7.544(1) Å, b=15.394(2) Å, c=18.568(3) Å. The other is the known triclinic K₂Mo₄O₁₃, whose structure was re-determined from single crystal data; its cell parameters were determined as a=7.976(2) Å, b=8.345(2) Å, c=10.017(2) Å, α=107.104(3)°, β=102.885(3)°, γ=109.760(3)°, which are the standard settings of the crystal lattice. The orthorhombic phase converts endothermically into triclinic phase at ca. 730 K with a heat of transition of 8.31 kJ/mol.     

Biosynthesis of kinamycin D. incorporation of [1,2-13C] acetate and of [2-2H3,1-13C]acetate

Results from the incorporation of [1,2-¹³C₂]- and [2-²H₃,1-¹³C]acetates into kinamycin D. indicate the involvement of only unsymmetrical intermediates; the identity of some of these are suggested.     

噻吩在Au_(13)和Pt_(13)团簇上加氢脱硫的反应机理比较

采用密度泛函理论研究了噻吩在立方正八面体的M_(13)(M=Au、Pt)团簇上的吸附和加氢脱硫行为。结果表明,噻吩以环吸附于Au_(13)上的Hol-tri位或Pt_(13)上的Hol-quadr位时最稳定,且Pt_(13)上的吸附稳定性更高。在M_(13)催化体系中,按间接加氢脱硫机理,反应可能依顺式加氢的方式进行;其中,C-S键断裂开环所需的活化能最高,是反应的限速步骤;按直接加氢脱硫机理,HS加氢所需活化能最高,是反应的限速步骤。同时该机理总体所需活化能较间接加氢脱硫机理更低,是更为合理的脱硫机理。噻吩加氢脱硫过程中,Au_(13)体系为放热反应,而Pt_(13)体系为吸热反应,并且Au_(13)体系加氢所需活化能更低;因此,Au_(13)更有利于噻吩加氢脱硫反应的进行。