Synthesis of linear polyquaternary salts derived from 4,4′-Bipyridine

1,1″-(1,3-Propanediyl)bis-4,4′-bipyridinium dibromide is converted to 1,1″-(1,3-propanediyl)bis[1′-(3-hydroxypropyl)-4,4′-bipyridinium] tetrabromide by reaction with 1,3-dibromopropane in hot aqueous dimethylformamide. The tetraquaternary salt participates in a dequaternization and coupling reaction on treatment with hot aqueous hydrobromic acid to afford an octaquaternary salt, which is readily converted to decaquaternary and dodecaquaternary derivatives. The 1,4-butanediyl analogue participates in a similar sequence of reactions.     

Synthescs and some reactions of N,N'-diamino-2,2′- and −4,4′-bipyridinium salts

The syntheses and some reaetions of N,N'-diamino-2,2′- and 4,4′-bipyridinium salts (IV, V and VI) are described. These compounds are prepared by the reaction of bipyridyls (I-III) with O-mesitylenesulfonylhydroxylamine in moderate to good yields. Compounds IV and VI were found to give the N,N'-diacyl derivatives by the reaction with acyl chlorides and to undergo 1,.3-dipolar cycloaddition reaction with an acetylenic compound to give 1:2 adducts. Photo-irradiation of N,N'-dibenzoylimino-2,2′-bipyridinium betaine (IX) isomerizes to a mono diazepine derivative (XVI).     

Organic Diodes Based on Redox-Polymer Bilayer-Film-Modified Electrodes

The synthesis of four electropolymerizable 2,2′-bipyridinium salts with tuned reduction potential (E₁^°) is described (N,N′-ethylene-4-methyl-4′-vinyl-2,2′-bipyridinium dibromide ( 4 ; E₁^° ?–0.48 V), 4-methyl-N, N′-(trimethylene)-4′-vinyl-2,2′-bipyridinium dibromide ( 5 ; E₁^°? ?0.66 V), N,N′-ethylene-4-methyl-4′-[2-(1H-pyrrol-1-yl)ethyl]-2, 2′-bipyridinium bis(hexafluorophosphate) ( 6b ; E₁^°? ?0.46 V), and 4-methyl-4′-[2-(1H-pyrrol-1-yl)ethyl]-N, N′-(trimethylene)-2,2′-bipyridinium bis(hexafluorophosphate) ( 7b ; E₁^°? ?0.66 V)). E₁^°-Tuning is based on the torsional angle C(3)–C(2)–C(2′)–C(3′), imposed by the N,N′-ethylene and N,N′-(trimethylene) bridge. The vinylic compounds 4 and 5 undergo cathodic, the pyrrole derivatives 6b and 7b anodic electropolymerization on glassy carbon electrodes from MeCN solutions, yielding thin, surface-confined films with surface concentrations of redox-active material in the range 5 · 10^?9 < Γ < 2.10^?8 mol/cm², depending on experimental conditions. The modified electrodes exhibit reversible ‘diquat’ electrochemistry in pure solvent/electrolyte. Copolymerization of 6b or 7b with pyrrole yields most stable electrodes. Bi ayer-film-modified electrodes were prepared by sequential electropolymerization of the monomers. The assembly electrode/poly- 6b /poly- 7b behaves as a switch, it transforms – as a Schmitt trigger – an analog input signal (the electrode potential) into a digital output signal (redox state of the outer polymer film). Forward-(electrode/poly- 7b /poly- 6b ) and reverse-biased assemblies (electrode/poly- 6b /poly- 7b ) were coupled to the electrochemical reduction of redox-active solution species, e.g. N- (cyanomethyl)-N′-methyl-4,4′-bipyridinium bis(hexafluorophosphate) ( 8 ). Zener-diode-like behavior was observed. Aspects of redox-polymer multilayer-film assemblies, sandwiched between two electronic conductors, are discussed in terms of molecular electronic devices.     

Photochromic and photomechanical ionene elastomer containing poly(tetrahydrofuran) segments and viologen units

Elastomeric polymer consisting of poly(oxytetramethylene) segments and viologen units (PTV) was synthesized by the reaction of dicationic living poly(tetrahydrofuran) with 4,4′-bipyridine at ?70°C. The chloride or bromide ion was introduced as the counter anion into the viologen groups of PTV by the treatment of the reaction mixture with aqueous sodium chloride or bromide, respectively. The solid film of PTV having chloride inon showed photochromism, i.e., color change by light irradiation, via photoreduction of the violegen groups. In contrast. PTV of bromide counter anion required a small amount of poly(N-vinyl-2-pyrrolidone) to undergo the photochromic reaction. The irradiation of light also affected the stress relaxation of the polymers, namely PTV showed photomechanical behavior. This phenomenon is considered to be induced by the decrease of total number of ionic charges of PTV by photo-reduction of the viologen groups followed by the change of a state of ionic clustering in the polymer matrix.     

Kinetic and spectroscopic investigations of aqueous micelles of cationic surfactants

The aqueous micellar solutions of monocationic surfactants N-hexadecyl-N,N,N-trimethylammonium bromide (CTABr), N-hexadecyl-N,N,N-trimethylammonium nitrate (CTANO₃), N,N,N-tributyl-N-hexadecylammonium bromide (CTBABr) and gemini surfactants 1,4-bis(N-hexadecyl-N,N-dimethylammonium)ethane dibromide (C-E-C2Br), 1,4-bis(N-hexadecyl-N,N-dimethylammonium)propane dibromide (C-P-C2Br), and 1,4-bis(N-hexadecyl-N,N-dimethylammonium)butane dibromide (C-B-C2Br) were studied with a solvatochromic probe, 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl)phenolate, better known as Reichard’s ET-30 dye. The local polarity at the probe site (E_T) was calculated from the wavelength maximum of the lowest-energy intramolecular charge-transfer ϖ-ϖ* absorption band of ET-30. The results were compared with a kinetic investigation of the cyclization of 2-(3-bromopropyloxy)phenoxide (PhBr7) in micelles; this reaction is a model for S_N2 reactions and it depends on medium polarity.     

Synthesis, Structure, Photoluminescence and Theoretical Study of (N,N′-Dimethyl-4,4′-bipyridinium)[Cd2(μ 2-Cl)4Cl2]n with N,N′-Dimethyl-4,4′-bipyridinium Generated in Situ

The title complex, (N,N′-dimethyl-4,4′-bipyridinium)[Cd₂(μ ₂-Cl)₄Cl₂]_n (1), in which the N,N′-dimethyl-4,4′-bipyridinium was generated in situ, was synthesized via hydrothermal reaction. X-Ray diffraction analysis revealed that the structure of 1 consisted of MV ²⁺ (MV ²⁺ = N,N′-dimethyl-4,4′-bipyridinium) cationic moieties and infinite [Cd2(μ ₂-Cl)₄Cl₂]_n anionic chains. The cadmium atom was bound by one terminal chlorine atom and four μ ₂-bridging chlorine atoms, yielding a slightly distorted triangular bipyramid. Photoluminescent investigation revealed that the complex displayed an emission in greenish blue region.     

1-(Aziridine) carbonyl chlorides and 1-(aziridine) carbonyl quaternary ammonium chlorides. Rearrangement to 2-(chloroalkyl) isocyanates

Aziridine reacted with phosgene in the presence of an acid acceptor or with 1,1′-carbonylbis(pyridinium) chloride to produce 1-(aziridine)carbonyl chloride (XII) or 1-(aziridine)carbonyl pyridinium chloride (XIII), respectively, as transient intermediates. Attempts to trap and observe (XII) and (XIII) at -10° were unsuccessful. These elusive materials underwent facile rearrangements to 2 - chloroethyl isocyanate under these conditions. Aziridine reacted with 1,1′-carbonylbis(triethylammonium)chloride (VII) at -20° to give 1-(aziridine) carbonyl triethylammonium chloride (X) as a transient intermediate which proceeded to 2-chloroethyl isocyanate. At -10° this reaction produced N,N-diethyl-1-aziridinecarboxamide. Aziridine reacted with a large excess of phosgene in the absence of an acid acceptor to give N-2-(chloroethyl) carbamoyl chloride (III), 1,1′-bis(2-chloroethyl) urea (IV) and 2-(β-chloroethylamino)-2-oxazoline hydrochloride (V). Possible mechanisms for these reactions are discussed.     

Synthesis of optically active poly(amide‐imide)s derived from N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L‐leucine diacid chloride and aromatic diamines by microwave radiation

3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (4,4′‐carbonyldiphathalic anhydride) was reacted with L ‐leucine in a mixture of acetic acid and pyridine (3 : 2), and the resulting imide‐acid [N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L ‐leucine diacid] was obtained in quantitative yield. The compound was converted to the N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L ‐leucine diacid chloride by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride with several aromatic diamines such as 4,4′‐diaminodiphenyl methane, 2,4‐diaminotoluene, 4,4′‐sulfonyldianiline, p‐phenylenedi‐amine, 4,4′‐diaminodiphenylether, and m‐phenylenediamine was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as O‐cresol. The polymerization reactions proceeded rapidly compared with the conventional solution polycondensation and were completed within 6 min, producing a series of optically active poly(amide‐imide)s with a high yield and an inherent viscosity of 0.37–0.57 dL/g. All of the above polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these optically active poly(amide‐imide)s are reported. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 177–186, 2001     

New,strong cationic hydrogels: Preparation of N,N,N′,N′‐tetraallyl piperazinium dibromide and its copolymers with N,N‐diallyl morpholinium bromide

N,N,N′,N′‐tetraallyl piperazinium dibromide (TAP) has been prepared in high yields by quaternization of N,N′‐diallyl piperazine with allyl bromide. Herein, we have described preparation of nonhydrolysable, strong, cationic hydrogels by copolymerization of TAP with N,N‐diallyl morpholinium bromide (DAM) in the presence of t‐butyl hydroperoxide as initiator in aqueous solutions. Because the monomer and crosslinker involved consist of quaternary amine functions, these hydrogels are fully cationic and do not carry hydrolysable groups. Contrary to expectations, the quaternary amine hydrogels presented do not show any super absorbency, instead dry gel particles in water undergo spontaneous disintegration with an audible bursting of the particles due to instantaneous, high osmotic pressure. Whereas, in KBr or HBr solutions, the swellings are relatively slow. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1006–1013, 2000     

PREPARATION AND CHARACTERIZATION OF COBALT(III) COMPLEXES WITH SARCOSINE AND SOME TETRADENTATE LIGANDS OF THE EDDA TYPE

Abstract

Meridional geometrical isomers of cobalt(III) complexes with sarcosine (N-methylglycine) and tetradentate ligands edda (ethylenediamine-N,N′-diacetate ion), eddp (ethylenediamine-N,N′-di-3-propionate ion) and 1,3-pdda (1,3-propylenediamine-N,N′-diacetate ion) have been prepared. The edda and eddp cobalt(III) complexes were made by the reaction of sarcosine and sodium ethylenediamine-N,N′-diacetato(carbonato)cobaltate(III), and sodium uns-cis-(ethylenediamine-N,N′-di-3-propionato)(carbonato)cobaltate(III) dihydrate, respectively. The previously synthesized pdda-cobalt(III) complex with sarcosine was obtained by a new route by direct synthesis of cobalt(II) chloride hexahydrate with sarcosine and 1,3-pdda in the presents of lead(IV) oxide. Complexes were isolated chromatographically and characterized by elemental analysis, electron absorption spectra, infrared spectra and ¹H NMR spectroscopy.     

Synthesis and mesogenic properties of four series of polyesters derived from dicarboxylic and dihydroxylic aromatic monomers

Some members of four series of polyesters were synthesized by the direct polycondensation of two types of dicarboxylic acids (4,4′-dicarboxy-α,ω-diphenoxyalkanes and 4,4′-dicarboxy-α,ω-dibenzoyloxyalkanes) with two types of bisphenols (4,4′-dihydroxy-α,ω-diphenoxyalkanes and 4,4′-dihydroxy-α,ω-dibenzoyloxyalkanes) using tosyl chloride in pyridine in the presence of N, N-dimethylformamide. The ¹H-NMR spectra of the polymers synthesized showed that these polymers have an ordenated structure. The mesogenic properties of these polymers were studied by optical microscopy and differential scanning calorimetry. Many of the polymers show nematic mesomorphism.     

Cyclisation of benzils

Treatment of several substituted benzils [3,3′- and 4,4′-dimethyl-; 2,2′-, 3,3′- and 4,4′-dichloro-; 3,3′-dibromo-; 4-(N,N-dimethylamino)-] with an excess of chlorosulfonic acid gave the corresponding 3-chloro-2-phenylbenzofuran disulfonyl dichlorides. Disubstitution was confirmed by microanalytical and spectral data for the corresponding bis(N,N-dimethylaminsulfonamides). The positions of electrophilic substitution were not confirmed with 3,3′-dimethyl-, 2,2′- and 3,3′-dichlorobenzils. With 4,4′-dichlorobenzil, a smaller amount of chlorosulfonic acid enabled the isolation of 3,6,4′-trichloro-2-phenylbenzofuran-5-sulfonyl chloride, which was identified by X-ray analysis of the N,N-dimethylsulfonamide. The cyclisation failed with 3,3′-dimethoxy-, and 3,3′- and 4,4′-dinitrobenzils. The results have been interpreted mechanistically.     

Elaboration of well‐defined Rasta resins and their use as supported catalytic systems for atom transfer radical polymerization

New supported catalytic systems based on the immobilization of a ligand onto supported (co)polymers were prepared, allowing copper immobilization onto a solid support during the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). These supported catalysts were elaborated by the ATRP of 2‐vinyl‐4,4‐dimethyl‐5‐oxazolone and/or styrene onto a Wang resin initiator. Two different approaches were used, involving well‐defined architectures synthesized by ATRP. First, a supported electrophilic homopolymer [Wang‐g‐poly(2‐vinyl‐4,4‐dimethyl‐5‐oxazolone)] was synthesized to obtain an azlactone ring at each repetitive unit, and a supported statistical copolymer [Wang‐g‐poly(2‐vinyl‐4,4‐dimethyl‐5‐oxazolone‐stat‐styrene)] was synthesized to introduce a distance between the azlactone rings. The azlactone‐based (co)polymers were then modified by a reaction with N,N,N′,N′‐tetraethyldiethylenetriamine (TEDETA) to create supported complexing sites for copper bromide. The ATRP of MMA was studied with these supported ligands, and a first‐order kinetic plot was obtained, but high polydispersity indices of the obtained poly(methyl methacrylate) were observed (polydispersity index > 2). On the other hand, the supported ATRP of styrene was performed, followed by the nucleophilic substitution of bromine by TEDETA (Wang‐g‐polystyrene–N,N,N′,N′‐tetraethyldiethylenetriamine) at the chain end of the grafted polystyrene chains. This strategy led the ligand away from the core bead, depending on the length of the polystyrene block (number‐average molecular weight determined by size exclusion chromatography = 1100–2250 g/mol). These supported complexes mediated a controlled polymerization of MMA, yielding polymers with controlled molar masses and low polydispersity indices. Moreover, after the polymerization, 96% of the initial copper was kept in the beads. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5316–5328, 2006     

Synthesis of 5H-benzoxazolo[3,2-a]quinazolin-5-ones

5H-Benzoxazolo[3,2-a]quinazolin-5-ones (Xa-d) were synthesized in excellent yields from N-(2-hydroxyphenyl)anthranilic acids (Ia-d) and cyanogen bromide. The synthesis was based on the mechanistic consideration of the reactions of salicylic acid with cyanogen bromide previously reported in the literature. A versatile alternative route to these novel heterocyclic compounds was through thermal cyclization of N-(2-benzoxazolyl)-2-fluorobenzamides (XIII) obtained by reacting 2-fluorobenzoyl chloride with 2-aminobenzoxazoles. The reaction of Xb with ethanol in the presence of potassium hydroxide gave an ethoxyquinazolinone (XVII). Similarly, the alkaline hydrolysis of Xb afforded an quinazolindione (XVIII).     

Synthesis and characterization of N‐benzoylated wholly aromatic polyamides from 4,4′‐oxydianilinobis(benzimidoyl) chloride and aromatic dicarboxylic acids

A novel type of polyamides, N‐benzoylated wholly aromatic polyamides, were synthesized by low‐temperature solution polycondensation of a new aromatic bis(imidoyl) chloride, 4,4′‐oxydianilinobis(benzimidoyl) chloride, with aromatic dicarboxylic acids, 4,4′‐oxydibenzoic acid and isophthalic acid. Compared with the conventional all aromatic polyamides and also N‐phenylated wholly aromatic polyamides, these N‐benzoylated aramides exhibit better solubility in organic solvents, lower glass transition temperatures and thermal stability.     

Organic solid photochromism by photoreduction mechanism: Polar aprotic viologen copolymers

Copolymers of vinyl viologens such as N-vinylbenzyl-N′-yalkyl and N-(γ-methyacryloyloxy)propyl-N′-propyl-4,4′-bipyridinium dihalides and polar aprotic comonomers such as N-vinyl-2-pyrrolidone (VP) and N,N-dimethylacrylamide (DMA) were prepared by the copolymerizations of vinyl viologens with DMA and the chemical modifications of VP copolymers containing reactive halogens. Copolymers containing various viologen anions such as Br^?, BF, SO, and I^? were also prepared by the anion exchange of copolymers containing Cl^?. The photocolor developments of these aprotic copolymers in the film state were completely reversible and faster than for the corresponding copolymers with protic comonomers such as acrylamide and 2-hydroxyethyl acrylate, all with characteristic absorption spectra attributable to single radical cations.     

High immobilization of antibacterial moieties onto monodisperse microspheres by dispersion polymerization using bicationic viologen surfmer

In order to achieve monodisperse particles with high content of antibacterial groups covalently bonded on surface, a bicationic viologen,N-hexyl-N’-(4-vinylbenzyl)-4,4’-bipyridinium bromide chloride(HW) was devised as a surfmer in dispersion polymerization of styrene(St) using a mixture of methanol(or ethylene glycol) and water as media.Effects of content of HW,its addition profile and composition of reaction media on particles size and incorporation of HW moieties were mainly investigated.The attachment of silver and gold nanoparticles on particle surface under UV irradiation ascertained the surface-bonded HW segments.SEM,TEM observations and XPS,zata potential measurements indicated that increase of initial HW contents and addition of HW(when polymerization had been performed for 3 h) led to grown particles and enhanced immobilization of HW moieties.Using a mixture of ethylene glycol and water as reaction media, small particles(520-142 nm) with highly attached HW moieties were prepared.Furthermore,antibacterial efficacy of the resultant particles against S.aureus was assayed,and particles with more HW moieties anchored on surface demonstrated greater efficiency of antibacterial activity.     

Does thiol-functionalized viologen monolayer memorize anion present when forming the monolayer?

We investigated the effect of the presence of an additive anion while forming a self-assembled monolayer of a thiol-functionalized redox active species upon the behavior in aqueous solutions. A bromide salt was added in an acetonitrile solution of a thiol-functionalized viologen (viologen-thiol: N-pentyl-N′-(11-mercapto)undecyl-4,4′-bipyridinium bishexafluorophosphate) in which the self-assembled monolayer was formed on a polycrystalline Au electrode. We examined the structure and electrochemical behavior of the resulting monolayer-modified electrode in three different aqueous electrolyte solutions. The viologen-thiol monolayer prepared in the presence of Br⁻ exhibited obviously different behavior in both KBr and KF electrolyte solutions from that prepared in the absence of Br⁻. On the other hand, the difference was minor in KPF₆ solution. The difference of the electrochemical behavior was represented by the coverage of the viologen-thiol and the formal potential of viologen dication/radical cation redox couple. The memory that the viologen-thiol monolayer was formed in the presence of Br⁻ was retained in KF and KBr solutions, though it was erased in the electrolyte solution containing PF₆⁻, which is a softer anion than Br⁻. However, no definitive difference of the film structure was deduced from the electroreflectance study in regard to the monomer content and the average orientation of the viologen moiety.     

In situ synthesis and structure of FeCl4(4,4′-diethyl-4,4′-bipyh) (bipy = bipyridine)

A novel viologen(4,4′-bipyridinium)-based compound FeCl₄(4,4′-diethyl-4,4′-bipyH) (1) (bipy = bipyridine), in which 4,4′-diethyl-4,4′-bipyH (MQ ⁺) was generated in situ, is synthesized via the hydrothermal reaction and structurally characterized by single crystal X-ray diffraction. The crystal structure analysis reveals that the title compound features an isolated structure based on 4,4′-diethyl-4,4′-bipyH moieties and an iron atom terminally bound by four chlorine atoms. The 4,4′-diethyl-4,4′-bipyH moieties and (FeCl₄)^? anions are interconnected by hydrogen bonds to form a 3D supramolecular framework.     

Complexation behaviour of a CT complex composed of 9,10-bis(3,5-dihydroxyphenyl)anthracene and viologen derivatives

A chiral charge-transfer (CT) complex was formed using achiral 9,10-bis(3,5-dihydroxyphenyl)anthracene (BDHA) as an electron donor and achiral 1,1′-dimethyl-4,4′-bipyridinium dichloride (MVCl₂) as an electron acceptor. This chiral CT complex can include n-alkyl alcohol molecules as guests. On the other hand, when 1,1′-diphenyl-4,4′-bipyridinium dichloride and 1,1′-dibenzyl-4,4′-bipyridinium dichloride were used as electron acceptors, achiral CT complexes without guests were formed. It was found that the chiral crystallisation of the BDHA/MVCl₂–CT host system was caused by steric and electric intermolecular interactions between host component molecules BDHA and MVCl₂ during crystallisation.