PdCl2(Ph3P)2/Salicylaldimine Catalyzed Diarylation of Anilines with Unactivated Aryl Chlorides

Triphenylphosphine and salicylaldimine could be used as a mixed ligand system to obtain a high catalytic activity for palladium catalyzed diarylation of primary anilines with unactivated aryl chlorides by the synergistic effect of ligands. The activity and selectivity of the catalytic system could be improved by modifying the structure of salicylaldimine. In refluxing o ‐xylene, PdCl₂(Ph₃P)₂ with 2,5‐ditrifluoromethyl N ‐phenylsalicylaldimine as a coligand shows high efficiency for the diarylation of various anilines. The catalytic system shows good toleration for the steric hindrance of the substrates. The facile catalytic system works as well on the multiple arylation of 1,1′‐biphenyl‐ 4,4′‐diamine with aryl chlorides to afford N ,N ,N′ ,N′ ‐tetraaryl‐1,1′‐biphenyl‐4,4′‐diamines which are important intermediates of organic light emitting diode (OLED) hole transport materials.     

Wittig reaction with ion-supported Ph3P

Ion-supported Ph₃P, 4-(diphenylphosphino)benzyltrimethylammonium bromide A and N-methyl-N-[4-(diphenylphosphino)benzyl]pyrrolidinium bromide B, were used for the Wittig reaction. Ion-supported phosphonium salts A1 and B1, which were prepared from the reactions of ion-supported Ph₃P A and B with ethyl bromoacetate, respectively, reacted with aromatic and aliphatic aldehydes in the presence of K₂CO₃ to give the corresponding α,β-unsaturated ethyl esters in good yields with high purity by simple filtration of the reaction mixture and subsequent removal of the solvent from the filtrate. Similarly, ion-supported phosphonium salts A2 and B2, which were prepared from the reactions of ion-supported Ph₃P A and B with p-methylbenzyl bromide, respectively, reacted with aromatic and aliphatic aldehydes in the presence of NaH to provide the corresponding p-methylstyrene derivatives in good yields with high purity by simple filtration of the reaction mixture and the subsequent removal of the solvent from the filtrate. In both reactions, the co-product, ion-supported Ph₃PO, could be obtained quantitatively by simple filtration, and was converted into the corresponding ion-supported Ph₃P A and B again in high yields using dimethyl sulfate, followed by the reduction with LiAlH₄. Recovered and regenerated ion-supported Ph₃P A and B could be reused for the same Wittig reaction while maintaining good yields of ethyl (E)-3-(4′-chlorophenyl)-2-propenoate and 1-(4′-chlorophenyl)-2-(4″-methylphenyl)ethene with high purity by simple filtration and removal of the solvent from the filtrate.     

One-step synthesis of pentavalent triphenylantimony derivatives Ph3Sb(OSiR3)2, Ph3Sb(OCH2CH2)2NH and Ph3Sb(OCH2CH2NMe2)2: X-ray molecular structure of Ph3Sb(OSiMe3)2

Pentavalent bis(triorganosiloxy)triphenylantimony derivatives, Ph₃Sb(OSiR₃)₂ (R = Me, Ph), were synthesized by reaction of triphenylantimony with trimethyl- or triphenylsilanol in the presence of tert-butylhydroperoxide by the mild reaction conditions (0-5 °C, 2 h). The reaction of triphenylantimony with diethanolamine in the presence of tert-butylhydroperoxide gave the cyclic compound Ph₃Sb(OCH₂CH₂)₂NH. The mixture of Ph₃SbO and Ph₃Sb(OCH₂CH₂NMe₂)₂ was obtained by the reaction of triphenylantimony with 2-(N,N-dimethylamino)ethanol in the presence of tert-butylhydroperoxide.     

trans-Pd(OAc)2(Cy2NH)2 catalyzed Suzuki coupling reactions and its temperature-dependent activities toward aryl bromides

A new catalytic system based on Pd-simple amines for Suzuki coupling reactions of aryl bromides is described. A well-defined air-stable complex, trans-Pd(OAc)₂(Cy₂NH)₂ effectively promotes Suzuki couplings of aryl bromides with a range of aryl boronic acids to give diaryl products in high yields. It also exhibits temperature-dependent activity toward aryl bromides bearing different electronic substituents under reaction conditions.     

Copper-catalyzed arylation of phenylurea using KF/Al2O3

A mild and efficient method for the copper-catalyzed arylation of phenylurea is described. The coupling reaction of phenylurea with different functionalized aryl iodides in the presence of air stable CuI, N,N′-dibenzylethylenediamine as a ligand, and KF/Al₂O₃ as a base gives symmetrical and unsymmetrical diarylureas in relatively high yields.     

Six-membered tetracarbonylmanganese(I) and -rhenium(I) metalacycles containing the [Ph2P(Se)NP(Se)Ph2] ligand: solution and solid state characterization

The halocarbonyls BrM(CO)₅, M = Mn and Re, were reacted with the KN(SePPh₂)₂ salt in equimolar amounts; the reactions were thermally carried out and resulted in the generation of the hexacoordinated isostructural complexes [M(CO)₄{Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] with a twist MSePNPSe ring conformation. Complexes’ characterizations were achieved by IR, mass, NMR (¹H, ¹³C, ³¹P, ⁷⁷Se) spectroscopies, and by single-crystal X-ray diffraction.     

Pd2dba3/P(i-BuNCH2CH2)3N: a highly efficient catalyst for the one-pot synthesis of trans-4-N,N-diarylaminostilbenes and N,N-diarylaminostyrenes

A Pd₂dba₃/P(i-BuNCH₂CH₂)₃N catalyzed one-pot synthesis of unsymmetrically substituted trans-4-N,N-diarylaminostilbenes and both symmetrically and unsymmetrically substituted N,N-diarylaminostyrene derivatives is reported. The procedure involves two or more palladium catalyzed sequential coupling reactions (an amination and an inter-molecular Heck reaction) in one-pot using the same catalyst system with two different aryl halides, including aryl chlorides and hetero aryl halides as the coupling partners.     

Formation of carbonylrhenium cryptates with alkali metal cations: Coordination chemistry studies of [Ph2P(E)NP(E)Ph2], E = O,S, Se towards ReBr(CO)5

Reaction of ReBr(CO)₅ with Li[Ph₂P(O)NP(O)Ph₂] afforded the cryptate Li[Re₂(CO)₆{μ-Ph₂P(O)NP(O)Ph₂-κ²O,O’}₃]; whereas K[Ph₂P(O)NP(O)Ph₂] reacted with ReBr(CO)₅ to give K[Re₂(CO)₆{μ-Ph₂P(O)NP(O)Ph₂-κ²O,O′}{Ph₂P(O)NP(O)Ph₂-κ²O,O′}₂]. Other chalcogen ligands’ salts M[Ph₂P(E)NP(E)Ph₂], E = Se and S, M = K and Li gave dirhenium carbonyls with bromido and Ph₂P(E)NP(E)Ph₂, E = Se or S bridges upon reaction with ReBr(CO)₅.     

Synthesis,characterization and antimicrobial studies of mixed ligand silver(I) complexes of thioureas and triphenylphosphine; crystal structure of {[Ag(PPh3)(thiourea)(NO3)]2·[Ag(PPh3)(thiourea)]2(NO3)2}

Mixed ligand silver(I) complexes of triphenylphosphine and thioureas (thiourea (Tu), N-methylthiourea (Metu), N,N′-dimethylthiourea (Dmtu) and N,N′-diethylthiourea (Detu)) with the general formulae, [(Ph₃P)₂Ag(thione)]NO₃ and [(Ph₃P)Ag(thione)₂]NO₃, have been prepared and characterized by elemental analysis, IR and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. The crystal structure of one of them has been determined by X-ray crystallography. The spectral data of the complexes are consistent with sulfur coordination of the thiones to silver(I). The single crystal X-ray structure of complex 1, {[Ag(PPh₃)(thiourea)(NO₃)]₂·[Ag(PPh₃)(thiourea)]₂(NO₃)₂}, shows that the complex consists of two independent centrosymmetric binuclear units, each having the silver atoms coordinated to one PPh₃ and two bridging thiourea molecules. In one of the independent units the silver atom is additionally bound to a nitrate ion, leading to a tetrahedral geometry, while in the other unit the silver atom adopts a trigonal planar environment. Antimicrobial activities of the complexes were evaluated by their minimum inhibitory concentration and the results showed that the complexes show a wide range of activity against two gram-negative bacteria (Escherichiacoli, Pseudomonasaeruginosa) and molds (Aspergillusniger, Penicilliumcitrinum), while the activities were poor against yeasts (Candidaalbicans, Saccharomycescerevisiae). However, the title complex did not show activity against any tested microorganism.     

The synthesis and characterization of a new 3-D inorganic-organic hybrid framework porous material Zn3(bbdc)3(4,4′-bpy)·2(DMF)·4(H2O)

A new 3-D inorganic-organic hybrid framework microporous material Zn₃(bbdc)₃(4,4′-bpy)·2(DMF)·4(H₂O) (1), which is constructed by coordination of zinc ions with 4,4′-bibenzene-dicarboxylic acid (H₂bbdc) and 4,4′-bipyridine (4,4′-bpy), was obtained at mild synthesis condition. Crystallographic data for the compound (1), C₅₈H₅₄N₄O₁₈Zn₃, orthorhombic, space group Pbcn, a=14. 532(3) Å, b=25.037(5) Å, c=18.184(4) Å, Z=4, V=6616(2) Å³.     

Pd2(dba)3/Xantphos-catalyzed cross-coupling of thiols and aryl bromides/triflates

The cross-coupling of aliphatic and aromatic thiols and aryl bromides/triflates mediated by a Pd₂(dba)₃/Xantphos catalytic system in refluxing xylene (140 °C) affords the corresponding aryl thioethers in good to excellent yields.     

Synthesis and characterizations of N,N,N′,N′-tetrakis (diphenylphosphino)ethylendiamine derivatives: Use of palladium(II) complex as pre-catalyst in Suzuki coupling and Heck reactions

Oxidation of N,N,N′,N′-tetrakis(diphenylphosphino)ethylendiamine (1) with elemental sulfur and selenium gives the corresponding sulfide and selenide, respectively, [(Ph₂P(E))₂NCH₂CH₂N(P(E)Ph₂)₂] (E: S 1a, Se 1b). Complexes of 1 [(M₂Cl₄){(Ph₂P)₂NCH₂CH₂N(PPh₂)₂}] (M: Ni(II) 1c, Pd(II) 1d, Pt(II) 1e) were prepared by the reaction of 1 with NiCl₂ or [MCl₂(COD)] (M = Pd, Pt). The new compounds were characterized by NMR, IR spectroscopy and elemental analysis. The catalytic activity of Pd(II) complex 1d was tested in the Suzuki coupling reaction and Heck reaction. The palladium complex 1d catalyses the Heck reaction between styrene and aryl bromides as well as Suzuki coupling reaction between phenylboronic acid and arylbromides affording stilbenes and biphenyls in high yield, respectively.     

A novel imido-transfer reaction of aldehydes with Ph3PNTs using RuCl2(PPh3)3 as catalyst

(N-Tosylimino)triphenylphosphorane (Ph₃PNTs) was found to be an efficient imido-transfer reagent for the imidation of a variety of aldehydes using RuCl₂(PPh₃)₃ as the catalyst.     

Copper(I) catalysis: Synthesis of N,N′-diarylated and N-aryl,N′-formylated chiral C2-symmetric diamines

Chiral N,N′-diaryl C₂-symmetric diamines and N-aryl,N′-formyl-trans-(1R,2R)-diaminocyclohexane are readily accessed by copper catalyzed N,N′-diarylation and N-aryl,N′-formylation of trans-(1R,2R)-diaminocyclohexane with aryl bromides. N,N′-diarylation using (R)-1,1′-binaphthyl-2,2′-diamine and iodobenzene gave the corresponding (R)-N,N′-diphenyl-1,1′-binaphthyl-2,2′-diamine derivative in 83% yield.     

Reactions of allylic compounds such as allyl alcohols,allyl ethers,and allylamines using trans-Mo(N2)2(Ph2PCH2CH2PPh2)2

Double-bond migration of allylic alcohols and allylic alkyl ethers was catalytically effected with trans-Mo(N₂)₂(dpe)₂(dpe = Ph₂PCH₂CH₂PPh₂). Decarbonylation occurred simultaneously in the case of allyl alcohol. Diallyl ether and allyl phenol ether gave the fragmentation products presumably through initial oxidative addition of the allylO bond. Allylamine was converted to N-propylideneallylamine and NH₃. N,N-Dimethylallylamine was isomerized to N-trans-propenyldimethylamine, which was further transformed into 4-dimethylamino-1,3-hexadiene and dimethylamine on addition of oxygen. The catalytic allylation of methyl acetoacetate with allylic ethers and amines was achieved by use of trans-Mo(N₂)₂(dpe)₂.     

Intramolecular oxidative addition of C-F and C-H bonds to [Pt(dba)2]. Crystal structure of [PtCl{Me2NCH2CH2NCH(2,4,5-C6HF3)}]

The reactions of compound [Pt(dba)₂] with ligands RCHNCH₂CH₂NMe₂ (1a-1f) in which R is a fluorinated aryl ring produced activation of C-F bonds when two fluorine atoms are present in the ortho positions of the aryl ring or activation of C-H bonds for ligands containing only one fluoro substituent in ortho. Both C-F and C-H bond activation are favoured by an increase of the degree of fluorination of the ring. Further reaction with lithium halides produced cyclometallated platinum (II) compounds [PtX(Me₂NCH₂CH₂NCHR)] (X = Br, Cl) (2) containing a terdentate [C,N,N′] ligand. The obtained compounds were fully characterized including a structure determination for [PtCl{Me₂NCH₂CH₂NCH(2,4,5-C₆HF₃)}] (2d′).     

The metal-halogen exchange reaction between ortho-substituted aryl halides and Ph2CuLi · LiCN: scope and applicability for coupling reactions

Metal-halogen exchange between Ph₂CuLi · LiCN and ortho-substituted aryl iodides or bromides may be used to conveniently afford substituted metallated aryls which can subsequently undergo reaction with electrophiles.     

CuI catalyzed C-N bond forming reactions between aryl/heteroaryl bromides and imidazoles in [Bmim]BF4

By using CuI as the catalyst and l-Proline as the ligand, the Ullmann-type coupling reactions of aryl/heteroaryl bromides and imidazoles in [Bmim]BF₄ at 105-115 °C gave the corresponding N-arylimidazoles/N-heteroarylimidazoles in good yields. The system offers a convenient, recyclable, and environmentally benign method for these coupling reactions.     

Synthesis and characterization of new Rh complexes bearing CO, PPh3 and chelating P,O- or Se,Se-ligands: Application to hydroformylation of styrene

The complexes [Rh(CO)(PPh₃){Ph₂PNP(O)Ph₂-P,O}] (3), [Rh(CO)₂{Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (5), and [Rh(CO)(PPh₃){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (6), were synthesised by stepwise reactions of CO and PPh₃ with [Rh(cod){Ph₂PNP(O)Ph₂-P,O}] (2) and [Rh(cod){Ph₂P(Se)NP(Se)Ph₂-Se,Se′}] (4), respectively. The complexes 3, 5 and 6 have been studied by IR, as well as ¹H and ³¹P NMR spectroscopy. The ν(CO) bands of complexes 3 and 6 appear at approximately 1960 cm⁻¹, indicating high electron density at the Rh^I centre. The structure of complexes 3 and 6 has been determined by X-ray crystallography, and the ³¹P NMR chemical shifts have been resolved via low temperature NMR experiments. Both complexes exhibit square planar geometry around the metal centre, with the five-membered ring of complex 3 being almost planar, and the six-membered ring of complex 6 adopting a slightly distorted boat conformation. The C-O bond of the carbonyl ligand is relatively weak in both complexes, due to strong π-back donation from the electron rich Rh^I centre. The catalytic activity of the complexes 2, 3 and 6 in the hydroformylation of styrene has been investigated. Complexes 2 and 3 showed satisfactory catalytic properties, whereas complex 6 had effectively no catalytic activity.     

Tetraphenylboroxinate(1-) salts of monoborate cations: Synthesis and single-crystal X-ray structures of [Ph2B{OCH2CH2N(Me)(CH2)n}2][Ph4B3O3] (n = 4, 5)

The salts, [Ph₂B{OCH₂CH₂N(Me)(CH₂)_n}₂][Ph₄B₃O₃] (n = 4, 5), were prepared in moderate yields in MeOH solution from reaction of Ph₂BOBPh₂ with [N(CH₂)_n(Me)(CH₂CH₂OH)][OH] and PhB(OH)₂ in a 1:2:4 ratio. The reactions also lead to Ph₃B₃O₃. Both salts were characterized by NMR (¹H, ¹³C, ¹¹B) IR, and single-crystal XRD studies. The salts are comprised of cationic monoborates (zwitterionic, 2N⁺ and 1B⁻) and tetraphenylboroxinate anions.