New iminophosphorane-mediated synthesis of thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones and 5H-2,3-dithia-5,7-diaza-cyclopenta[c,d]indenes

Mono(iminophosphorane) 4 was selectively prepared from the reaction of 3,4-diaminothieno[2,3-b]thiophene 3 with excess triphenylphosphine, C₂Cl₆, and Et₃N due to intramolecular double hydrogen bond formation. Mono(iminophosphorane) 4 reacted with aromatic isocyanates to give stable carbodiimides 8, which were further treated with aliphatic secondary or primary amines to give 2-amino substituted thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones 10 or 12 in the presence of a catalytic amounts of EtO⁻Na⁺. However, in the presence of a catalytic amounts of potassium carbonate, the carbodiimides 8 were transformed into previously unreported 5H-2,3-dithia-5,7-diaza-cyclopenta[c,d]indenes 13 via direct cyclization in high yields. The reaction of carbodiimides 8 with phenols in the presence of a catalytic amounts of potassium carbonate gave a mixture of 2-aryloxy substituted thieno[3′,2′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones 14 and 13. X-ray structure analysis of 10m supported the structure and the proposed reactivity of amino group.     

A practical one-pot procedure for the synthesis of pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidinones by a tandem aza-Wittig/heterocumulene-mediated annulation strategy

A simple one-pot and efficient method is described for the synthesis of pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidinone derivatives 6 via a tandem aza-Wittig/heterocumulene-mediated annulation process. The iminophosphorane 3 reacted with aryl isocyanates, followed by heterocyclization on addition of secondary amines to give the corresponding guanidine intermediates 5, which were cyclized in the presence of a catalytic amount of potassium carbonate to tricyclic compounds 6. Similarly, iminophosphorane 3 reacts with phenols, thiophenol, or ROH to give 2-aryl(alkyl)oxy(thio)pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidinone derivatives 7 in good yields. The corresponding carbodiimide 4c and guanidine-type intermediate compounds 5 could be isolated and characterized, thus confirming the suggested reaction pathway. However, two isomeric pyrazinothienopyrimidinones 8 and 9 may be produced in the reaction of iminophosphorane 3 with aromatic isocyanates and subsequent reaction with primary amines in the presence of a catalytic amount of potassium carbonate. The effects of the nucleophiles and isocyanates on the regioselectivity of the cyclization have been investigated.     

First synthesis of pyrrolo[1,2:1′,2′]azepino[5,6-b]indole derivatives

A new family of pyrrolo[1,2:1′,2′]azepino[5,6-b]indole derivatives 8,15 related to anthramycin skeleton was prepared in good yield from indole-2-carboxylic acid and β-aminoesters 4 through intramolecular cyclisation.     

Efficient synthesis of novel dipyridoimidazoles and pyrido[1′,2′;1,2]imidazo[4,5-d]pyridazine derivatives

Novel dipyrido[1,2-a;3′,4′-d]imidazoles 7a-d, dipyrido[1,2-a;4′,3′-d]imidazoles 8a,c and pyrido[1′,2′;1,2]imidazo[4,5-d]pyridazine derivatives 9a-d were synthesized by two pathways: thermal electrocyclic reaction of 3-alkenylimidazopyridine-2-oximes 10 and direct condensation of ethyl glycinate (or hydrazine) with 2,3-dicarbonylimidazo[1,2-a]pyridines 11.     

Stabilization of (N-methyleneamino)imidoylketenes: synthesis of dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazines

Thermolysis of substituted methyl 1-methyleneamino-4,5-dioxo-4,5-dihydro-1H-pyrrole-2-carboxylates 2a,b led to substituted dimethyl 3,9-dioxo-1,5,7,11-tetrahydro-1H,7H-dipyrazolo[1,2-a;1′,2′-d][1,2,4,5]tetrazine-1,7-dicarboxylates 4a,b and methyl 2,5-dihydro-5-oxo-1H-pyrazole-3-carboxylates 5a,b as minor products. The structure of compound 4a was determined by X-ray crystallography. The proposed mechanism of this conversion includes generation of (N-methyleneamino)imidoylketenes 6a,b and its intramolecular transformation to azomethine imines—5-oxo-2,5-dihydropyrazole-1-methylium-2-ides 7a,b, which undergo dimerization in head-to-tail manner yielding products 4a,b and partially hydrolyse to compounds 5a,b.     

Synthesis, single crystal X-ray structure and optical properties of 3,4-dimethyl-dithieno[2,3-b:3′,2′-d]thiophene-7,7-dioxide

The synthesis of the title compound (4), starting from commercial 3-bromo-4-methylthiophene, is described. The single crystal packing mode of 4, as well as the absorption and photoluminescence properties in solution and in the solid state are reported and analyzed in relation to those of the isomeric 3,5-dimethyl-dithieno[3,2-b:2′,3′-d]thiophene-4,4-dioxide (7). The different reactivities of 4 and 7 towards bromination are analyzed in the light of the results of ab initio B3LYP/6-31G^∗ calculations on both compounds.     

Microwave-assisted Hantzsch thiazole synthesis of N-phenyl-4-(6-phenylimidazo[2,1-b]thiazol-5-yl)thiazol-2-amines from the reaction of 2-chloro-1-(6-phenylimidazo[2,1-b]thiazol-5-yl)ethanones and thioureas

N-Phenyl-4-(6-phenylimidazo[2,1-b]thiazol-5-yl)thiazol-2-amines (6a-q) have been synthesized by the Hantzsch thiazole reaction of 2-chloro-1-(6-phenylimidazo[2,1-b]thiazol-5-yl)ethanones (4a-e) with suitably substituted thioureas using microwave heating. The ethanones (4a-e) were prepared by the reaction of 6-phenylimidazo[2,1-b]thiazoles (3a-e) with chloroacetylchloride in refluxing 1,4-dioxane whereas the thiazoles (3a-e) were synthesized by the reaction of 2-bromo-1-phenylethanones (2a-e) with thiazol-2-amine in refluxing acetone.     

An efficient one-pot three-step domino synthesis of substituted bis(pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones)

A convenient and efficient one-pot three-step domino approach to bis(pyrazinothienopyrimidinones) from ethyl 3-(triphenylphosphoranylideneamino)-thieno[2,3-b]pyrazine-6-carboxylate 1 has been developed. In this method, treatment of phosphazene 1 with a mixture of isocyanates, nitrogen, sulfur, and oxygen bis(nucleophiles) and K₂CO₃ in refluxing THF regioselectively furnishes the corresponding bis(pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidin-4(3H)-ones) in satisfactory to good yields. This methodology is highly versatile and efficient for the generation of these functionalized bis(triheterocyclic) compounds that are not readily available by other synthetic methods.     

Efficient one-pot preparation of bis(pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidin-4-yl)benzenes based on an aza-Wittig/mediated annulation strategy

Aza-Wittig mediated annulation provides a highly facile and straightforward one-pot strategy for the synthesis of bis(pyrazino[2′,3′:4,5]thieno[3,2-d]pyrimidin-4-yl)benzenes 5 and 7. A tandem aza-Wittig reaction of iminophosphorane 2 with 1,4- or 1,3-phenylene diisocyanate, followed by intramolecular heteroconjugate addition annulation after addition of a nucleophilic reagent (amine, phenol, thiophenol or ROH), in presence of catalytic K₂CO₃ or NaOR, gives selectively the functionalized bis(pyrazinothienopyrimidinones) 5 and 7.     

Tunable blue-emitting fluorophores—benzo[1,2-b:4,3-b′]dithiophene and trithia[5]helicene end-capped with electron-rich or electron-deficient aryl substituents

Light-emitting fluorophores 1-10b based on aryl substituted benzo[1,2-b:4,3-b′]dithiophenes (BDT) and trithia[5]helicenes (T5H) have been synthesized using various combinations of Suzuki coupling, the Wittig, or McMurry reaction, and subsequent photocyclization of the dithienylethenes thus obtained. Photophysical properties of the helical compounds end-capped with different electron-rich and electron-deficient aryl moieties thus resulting were evaluated. Photocyclization of a dithienylethene derivative 10a was investigated, and the X-ray crystal structure of dinaphthyl-substituted BDT (4) was obtained. With this series of compounds 1-10b, we demonstrate that the optical properties of all of the new compounds, and by extension many conjugated materials, can be tuned over the entire blue range (400-480 nm).     

Chemoselective asymmetric synthesis of C-3a-(3-hydroxypropyl)tetrahydropyrrolo[2,3-b]indole and C-4a-(2-aminoethyl)-tetrahydropyrano[2,3-b]indole derivatives

The asymmetric synthesis of new tetrahydropyrrolo[2,3-b]indole 19 and tetrahydropyrano[2,3-b]indole 20 rings, substituted in position C-3a and C-4a with a hydroxy- and an amino functionalized chain, respectively, was performed starting from the racemic spiro[cyclohexane-1,3′-indoline]-2′,4-diones 7. The enantiopure spiro oxo-azepinoindolinone (+)-10, obtained from (±)-7 by the way of an asymmetric ring enlargement, and the amino acid (+)-14, obtained by the hydrolysis of 10, were prepared as key intermediates for the synthesis of enantiopure compounds (−)-19 and (−)-20. Since the amino acid 14 is the common intermediate for the chemoselective preparation of derivatives 19 and 20, experimental and computational studies were performed in order to selectively obtain these compounds and to provide a mechanistic rationalization for their formation.     

Microwave assisted synthesis of novel imidazo [2,1-b]thiazole derivative attached to quinoxalinones

3-(6-Phenylimidazo[2,1-b]thiazol-5-yl)quinoxalin-2(1H)-ones (qunoxalinone) (6a-q) have been synthesized by the reaction of ethyl 2-oxo-2-(6-phenylimidazo[2,1-b]thiazol-5-yl)acetates (4a-e) with suitably substituted o-phenylenediamines (5a-f) under microwave heating. The ethyl 2-oxo-2-(6-phenylimidazo[2,1-b]thiazol-5-yl)acetates (4a-e) were prepared by the reaction of 6-phenylimidazo[2,1-b]thiazoles (3a-e) with ethyl chlorooxoacetate in refluxing 1,4-dioxane whereas the thiazoles (3a-e) were synthesized by the reaction of 2-bromo-1-phenylethanones (2a-e) with thiazol-2-amine in refluxing acetone.     

Unexpected reaction of 2-amino-1,4-naphthoquinone with aldehydes: new synthesis of naphtho[2,1-d]oxazole compounds

Treatment of 3-substituted 2-amino-1,4-naphthoquinones 3 with an aldehyde in a solution of hydrobromic acid in acetic acid led to 2,4-disubstituted naphtho[2,1-d]oxazol-5-ols. The outcome of this simple conversion is even more remarkable in view of the very similar reactions reported in literature, which all give rise to completely different products. Furthermore, the acquired naphthoxazoles 5-11 could be oxidatively ring opened by means of PIFA or CAN into a series of N-acylated 2-amino-1,4-naphthoquinones. A synthetic pathway towards 2-substituted naphtho[2,3-d]oxazole-4,9-diones was also disclosed as the outcome of CAN mediated oxidation of a 4-chloronaphtho[2,1-d]oxazol-5-ol.     

Chemistry of cyclopropenones: synthesis of new pyrrolo[2,1-b]-1,3,4-oxadiazoles

2,3-Diphenylcyclopropenone (1) reacts with ylidene-N-phenylhydrazine-carbothioamides 2a-e to form the pyrrolo[2,1-b]-1,3,4-oxadiazoles 5a-e.     

Preparation of novel pyridine-fused tris-heterocycles; pyrido[4,3-e]pyrrolo-/pyrido[4,3-e]furano[2,3-c]pyridazines and pyrido[3,4-b]pyrrolo[3,2-d]pyrrole

Three novel pyrido-fused tris-heterocycles have been prepared based on a Suzuki coupling and subsequent cyclisation approach. Pyrido[4,3-e]pyrrolo[2,3-c]pyridazine (3b, 77%) and pyrido[4,3-e]furano[2,3-c]pyridazine (5b, 76%) were obtained by intramolecular diazocoupling. Successful diazocoupling of furan (5b) is thus reported for the first time by NOBF₄ generation of the diazonium intermediate. N-TIPS-pyrido[3,4-b]pyrrolo[3,2-d]pyrrole (TIPS-4b) was synthesised by thermal cyclisation of pyridyl nitrene in considerably higher yield (71%) than previously experienced from similar cyclisations, due to TIPS-activation.     

Studies on uracils: a facile one-pot synthesis of oxazino[4,5-d]-, pyrano[2,3-d]-, pyrido[2,3-d]- and pyrimido[4,5-d]pyrimidines using microwave irradiation in the solid state

N,N-Dimethyl-5-formylbarbituric acid 1 reacts with maleimide 2 and phenyl isocyanate/phenyl isothiocyanate 4 under microwave-assisted conditions in the solid phase to afford pyrano[2,3-d]pyrimidines 3 and oxazino[4,5-d]pyrimidines 5 in excellent yields. Under identical conditions, N,N-dimethyl-6-amino-5-formyluracil 6 reacts with 2 and 4 to give pyrido[2,3-d]pyrimidine derivative 7 and pyrimido[4,5-d]pyrimidines 8 in high yields.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Preparation of new pyrido[3,4-b]thienopyrroles and pyrido[4,3-e]thienopyridazines

Two new types of pyrido-fused tris-heterocycles (1a,b and 2a,b) have been prepared from 3-aminopyridine in five/six steps. A synthetic strategy for the preparation of the novel pyrido[3,4-b]thieno[2,3- and 3,2-d]pyrroles (1a,b) and pyrido[4,3-e]thieno[2,3- and 3,2-c]pyridazines (2a,b) has been studied. The Suzuki cross coupling of the appropriate 2- and 3-thienoboronic acids (3,4) and 4-bromo-3-pyridylpivaloylamide (9) afforded the biaryl coupling products (10,11) in high yields (85%). Diazotization of the hydrolysed (2-thienyl)-coupling product (12) and azide substitution gave the 3-azido-4-(2-thienyl)pyridine intermediate (72%, 14). 3-Azido-4-(3-thienyl)pyridine (15) was prepared by exchanging the previous order of reactions. The desired β-carboline thiophene analogues (1a,b) were obtained via the nitrene by thermal decomposition of the azido precursors (14,15). By optimising conditions for intramolecular diazocoupling, the corresponding pyridazine products (72-83%, 2a,b) were afforded.     

Substituted coumarin amidines: useful building blocks for the preparation of [1]benzopyrano[4,3-b]pyridin-5-one and [1]benzopyrano[4,3-d]pyrimidin-5-one derivatives

The synthesis of [1]benzopyrano[4,3-b]pyridin-5-ones 4a-f and 4g-j starting from 3-formylcoumarin and 3-cyanocoumarin N-functionalized amidines 3a-f and 3g-j, respectively, was reported. The ring-closure reaction mechanism, under basic or acidic media, was proposed. Furthermore, the reaction of 3-formylamidines 3a,c-f with ammonium acetate gave good yields of 2-substituted [1]benzopyrano[4,3-d]pyrimidin-5-ones 7.     

A facile synthesis of pyrrolo[1,2-a]benzimidazoles and pyrazolo[3,4:4′,3′]pyrrolo[1,2-a]benzimidazole derivatives

Reaction of 2-cyanomethylbenzimidazole 1 with hydrazonoyl halides 2 led to formation of pyrrolo[1,2-a]benzimidazole derivatives 7. Similar reaction of 1 with halides 3 afforded 5-amino-4-(benzimidazol-2-yl)pyrazole derivatives 11 or 1-amino-2-arylpyrazolo[3,4:4′,3′]pyrrolo[1,2-a]benzimidazol-4-one 14 depending on the reaction conditions. The mechanisms of the studied reactions are discussed.