Syntheses, structures, spectroscopic, electrochemical properties and DFT calculation of Ru(II)–thioarylazoimidazole complexes

The reaction of 1-alkyl-2-{(o-thioalkyl)phenylazo}imidazoles (SRaaiNR) (2a/2b) with Ru(II) has synthesized [Ru(SRaaiNR)₂](ClO₄)₂ (3a/3b) in 2-methoxyethanol. The reaction in methanol, however, has synthesized [Ru(SRaaiNR)(SRaaiNR)Cl](ClO₄) (4a/4b). The solid phase reaction of SRaaiNR and RuCl₃ on silica gel surface upon microwave irradiation has synthesized [Ru(SRaaiNR)(SaaiNR)](PF₆) (5a/5b) [SRaaiNR represents tridentate N,N′,S-chelator; SRaaiNR is N,N′-bidentate chelator where S does not coordinate and SaaiNR refers N,N′,S-chelator where S refers to thiolato binding]. The structural characterization of [Ru(SEtaaiNEt)(SEtaaiNEt)Cl](ClO₄) (4b) and [Ru(SEtaaiNEt)(SaaiNEt)](PF₆) (5b) has been confirmed by single crystal X-ray diffraction study. The IR, UV–Vis, and ¹H NMR spectral data also support the stereochemistry of the complexes. The complexes show metal oxidation, Ru(III)/Ru(II), and ligand reductions (azo/azo⁻, azo⁻/azo). The molecular orbital diagram has been drawn by density functional theory (DFT) calculation. Normal mode of analysis has been performed to correlate calculated and experimental frequencies of representative complexes. The electronic movement and assignment of electronic spectra have been carried out by TDDFT calculation both in gas and acetonitrile phase.     

Facile strategies for the synthesis and crystallization of linear trinuclear nickel(II)-Schiff base complexes with carboxylate bridges: Tuning of coordination geometry and magnetic properties

Three new linear trinuclear nickel(II) complexes, [Ni₃(salpen)₂(OAc)₂(H₂O)₂]·4H₂O (1) (OAc = acetate, CH₃COO⁻), [Ni₃(salpen)₂(OBz)₂] (2) (OBz = benzoate, PhCOO⁻) and [Ni₃(salpen)₂(OCn)₂(CH₃CN)₂] (4) (OCn = cinnamate, PhCHCHCOO⁻), H₂salpen = tetradentate ligand, N,N′-bis(salicylidene)-1,3-pentanediamine have been synthesized and characterized structurally and magnetically. The choice of solvent for growing single crystal was made by inspecting the morphology of the initially obtained solids with the help of SEM study. The magnetic properties of a closely related complex, [Ni₃(salpen)₂(OPh)₂(EtOH)] (3) (OPh = phenyl acetate, PhCH₂COO⁻) whose structure and solution properties have been reported recently, has also been studied here. The structural analyses reveal that both phenoxo and carboxylate bridging are present in all the complexes and the three Ni(II) atoms remain in linear disposition. Although the Schiff base ligand and the syn–syn bridging bidentate mode of the carboxylate group remain the same in complexes 1–4, the change of alkyl/aryl group of the carboxylates brings about systematic variations between six- and five-coordination in the geometry of the terminal Ni(II) centres of the trinuclear units. The steric demand as well as hydrophobic nature of the alkyl/aryl group of the carboxylate is found to play a crucial role in the tuning of the geometry. Variable-temperature (2–300 K) magnetic susceptibility measurements show that complexes 1–4 are antiferromagnetically coupled (J = −3.2(1), −4.6(1), −3.2(1) and −2.8(1) cm⁻¹ in 1–4, respectively). Calculations of the zero-field splitting parameter indicate that the values of D for complexes 1–4 are in the high range (D = +9.1(2), +14.2(2), +9.8(2) and +8.6(1) cm⁻¹ for 1–4, respectively). The highest D value of +14.2(2) and +9.8(2) cm⁻¹ for complexes 2 and 3, respectively, are consistent with the pentacoordinated geometry of the two terminal nickel(II) ions in 2 and one terminal nickel(II) ion in 3.     

A Pd(OAc)2/[mmim]I Catalyst System for Oxidative Carbonylation of Amines to Carbamates, Ureas, and 2-Oxazolidinones

A Pd(OAc)₂/[mmim]I ([mmim]I=1-methyl-3-methylimidazolium iodide) catalyst system was applied to the oxidative carbonylation of aliphatic amines, aromatic amines, and amino alcohols to carbamates, ureas, and 2-oxazolidinones under different conditions. The catalytic turnover frequencies (TOF, moles of amines converted per mole of catalyst per hour) were 12417, 17368, and 4114 h⁻¹ for the production of methyl N-phenyl carbamate, N,N′-diphenyl urea, and 2-benzoxazolinone, respectively.     

Ruthenium-azoimine-chloranilates Synthesis,Spectra and Electrochemistry of Ruthenium(II)-1-alkyl-2-(arylazo)imidazole-chloranilate Complexes

Ag⁺-assisted dechlorination of blue cis-trans-cis Ru(R-aai-R′)₂Cl₂ followed by the reaction with chloranilic acid (H₂CA) in the presence of Et₃N, gives a neutral mononuclear violet complex [Ru(R-aai-R′)₂(CA)]. [R-aai-R′=p-R-C₆H₄—N=N—C₃H₂—NN, abbreviated as an N,N′ chelator where N(imidazole) and N(azo) represent N and N′, respectively; R = H (a), OMe (b), NO₂ (c) and R′= Me (4), Et(5), Bz(6)]. All the complexes exhibit strong intense MLCT transitions in the visible region and weak broad bands at higher wavelength (>700 nm). Visible transitions (580–595 nm) show a negative solvatochromic effect. The cyclic voltammograms show two quasireversible to irreversible couples positive to SCE and are due to CA⁻/CA²⁻ (1.2–1.35 V) and Ru(III)/Ru(II) (1.6–1.8 V) redox processes. Three couples, negative to SCE, are assigned to CA²⁻/CA³⁻ (−0.2 to −0.3 V), and azo reductions (−0.5 to −0.7, −0.8 to −0.9 V) of the chelated R-aai-R′.     

Preparation of chiral diimino- and diaminodiphosphine ligands and their Cu and Ag complexes. X-ray crystal structures of [Cu(1S,2S-cyclohexyl-P2N2)][PF6] and [Ag(1R,2R-cyclohexyl-P2N2H4)][BF4]

The interaction of optically pure 1R,2R-diammoniumyclohexane mono-(+)-tartrate and 1S,2S-diammoniumcyclohexane mono-(−)-tartrate with 2 equiv. of o-(diphenylphosphino)benzaldehyde in the presence of 2 equiv. of potassium carbonate in a refluxing ethanol/water mixture gave the optically pure condensation products N,N′-bis[o-(diphenylphosphino)benzylidene]-1R,2R-diiminocyclohexane[1R,2R-cyclohexyl-P₂N₂, (R,R)-I] and N,N′-bis[o-(diphenylphosphino)benzylidene]-1S,2S-diiminocyclohexane [1S,2S-cyclohexyl-P₂N₂, (S,S)-I], respectively, in good yield. Reduction of optically pure (R,R)-I and (S,S)-I with NaBH₄ in ethanol gave the optically pure reduced products N,N′-bis[o-(diphenylphosphino)benzylidene]-1R,2R-diaminocyclohexane[1R,2R-cyclohexyl-P₂N₂H₄, (R,R)-II] and N,N′-bis[o-diphenylphosphine)benzylidene]-1S,2S-diaminocyclohexane[1S,2S-cyclohexyl-P₂N₂H₄, (S,S)-II], respectively, in good yield. The coordination behaviour of I and II toward salts of Cu^I and Ag^I have been examined. The interaction of [Cu(C)₃CN)₄][X] (X = ClO₄⁻, PF₆⁻) with 1 equiv. of optically pure L₄ [L₄ = (R,R)-I, (S,S)-I, (R,R)-II and (S,S)-II] gave the corresponding optically pure [CuL₄][X] complexes, III–VI IIIa, L₄ = (R,R)-I, X = PF₆⁻ IIIb, L₄ = (R,R)-I, X = ClO₄⁻ IV, X = PF₆⁻; Va, L₄ = (R,R)-II, X = PF₆⁻, Vb L₄ = (R,R)-II, X= ClO₄⁻, VI L₄ = (S,S)-II, X = PF₆⁻, in good yield. For the Cu^I complexes, the L₄ ligand acted as a tetradentate ligand. However, a variable-temperature ³¹P[¹H] NMR study of IIIb shows that at ambient temperature one of the imino groups of the tetradentate ligand undergoes rapid dissociation to form a tridentate ligand. The interaction of AgBF₄ with 1 equiv. of otpically pure L₄ [L₄ = (R,R)-I, (S,S)-I, (R,R)-II and (S,S)-II gave the corresponding optically pure [AgL₄][BF₄] complexes, VII–X VII L₄ = (R,R)-I; VIII, L₄ = (S,S)-I; IX,L₄ = (R,R)-II; X, L₄ = (S,S)-II], in good yield. For the Ag^I complexes, the L₄ ligand acted as a tetradentate ligand with the two amino groups coordinated unsymmetrically to the silver. A variable temperature ³¹P [¹H] NMR study of VII suggests that at high temperature the complex exists as a tri-coordinated complex. The structurers of IV and IX were established by X-ray diffraction studies.     

Synthesis and characterization of half-sandwich iridium(III) and rhodium(III) complexes bearing organochalcogen ligands

Reactions of [Cp*M(μ-Cl)Cl]₂ (M = Ir, Rh; Cp* = η⁵-pentamethylcyclopentadienyl) with bi- or tri-dentate organochalcogen ligands Mbit (L1), Mbpit (L2), Mbbit (L3) and [Tm^Me]⁻ (L4) (Mbit = 1,1′-methylenebis(3-methyl-imidazole-2-thione); Mbpit = 1,1′-methylene bis (3-iso-propyl-imidazole-2-thione), Mbbit = 1,1′-methylene bis (3-tert-butyl-imidazole-2-thione)) and [Tm^Me]⁻ (Tm^Me = tris (2-mercapto-1-methylimidazolyl) borate) result in the formation of the 18-electron half-sandwich complexes [Cp*M(Mbit)Cl]Cl (M = Ir, 1a; M = Rh, 1b), [Cp*M(Mbpit)Cl]Cl (M = Ir, 2a; M = Rh, 2b), [Cp*M(Mbbit)Cl]Cl (M = Ir, 3a; M = Rh, 3b) and [Cp*M(Tm^Me)]Cl (M = Ir, 4a; M = Rh, 4b), respectively. All complexes have been characterized by elemental analysis, NMR and IR spectra. The molecular structures of 1a, 2b and 4a have been determined by X-ray crystallography.     

Synthesis of new piperazine derived Cu(II)/Zn(II) metal complexes, their DNA binding studies, electrochemistry and anti-microbial activity: Validation for specific recognition of Zn(II) complex to DNA helix by interaction with thymine base

New 3,4:9,10-dibenzo-2,11-dihydroxy-1,12-bispiperazine-5,8-dioxododecane complexes [C₂₄H₃₆N₄O₆Cu] (1), [C₂₄H₃₂N₄O₄Zn] (2) have been synthesized and characterized by elemental analysis, IR, NMR, Mass, EPR, UV–vis spectroscopy and molar conductance measurements. The complexes are non-ionic in nature and possess octahedral geometry around Cu²⁺, Zn²⁺ central metal ions. The binding studies of 1 and 2 with calf thymus DNA (CT-DNA) were investigated by UV–vis, fluorescence, cyclic voltammetery and viscosity measurements. The calculated binding constant K_b for 1 and 2 obtained from UV–vis absorption studies was 7.6 × 10³ M⁻¹, 80.8 × 10⁴ M⁻¹, respectively. The intrinsic binding constants were also estimated to be 7.0 × 10⁴ M⁻¹ and 7.53 × 10⁵ M⁻¹ for 1 and 2, respectively by using emission titrations. These experimental results suggest that complexes are groove binders and interact to CT-DNA with different affinities. Both the complexes in presence and absence of CT-DNA show quasireversible wave corresponding to Cu^II/Cu^I and Zn^II/Zn^I redox couple. The changes in E_1/2, ΔE, I_pa/I_pc ascertain the interaction of 1 and 2 with CT-DNA. Further, decrease in viscosity of CT-DNA with increasing concentration of complexes was observed. In vitro, antimicrobial activity against fungi A. brassicicola, A. niger and bacteria E. coli, P. aeruginosa of complexes were carried out, which indicate that complex 2 is more active against both fungal and bacterial strains as shown by % inhibition data.     

Palladium acetate complexes bearing chelating N-heterocyclic carbene (NHC) ligands: Synthesis and catalytic oxidative homocoupling of terminal alkynes

The imidazolium salts 1,1′-dibenzyl-3,3′-propylenediimidazolium dichloride and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazolium dichloride have been synthesized and transformed into the corresponding bis(NHC) ligands 1,1′-dibenzyl-3,3′-propylenediimidazol-2-ylidene (L₁) and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazol-2-ylidene (L₂) that have been employed to stabilize the Pd^II complexes PdCl₂(κ²-C,C-L₁) (2a) and PdCl₂(κ²-C,C-L₂) (2b). Both latter complexes together with their known homologous counterparts PdCl₂(κ²-C,C-L₃) (1a) (L₃ = 1,1′-dibenzyl-3,3′-ethylenediimidazol-2-ylidene) and PdCl₂(κ²-C,C-L₄) (1b) (L₄ = 1,1′-bis(1-naphthalenemethyl)-3,3′-ethylenediimidazol-2-ylidene) have been straightforwardly converted into the corresponding palladium acetate compounds Pd(κ¹-O-OAc)₂(κ²-C,C-L₃) (3a) (OAc = acetate), Pd(κ¹-O-OAc)₂(κ²-C,C-L₄) (3b), Pd(κ¹-O-OAc)₂(κ²-C,C-L₁) (4a), and Pd(κ¹-O-OAc)₂(κ²-C,C-L₂) (4b). In addition, the phosphanyl-NHC-modified palladium acetate complex Pd(κ¹-O-OAc)₂ (κ²-P,C-L₅) (6) (L₅ = 1-((2-diphenylphosphanyl)methylphenyl)-3-methyl-imidazol-2-ylidene) has been synthesized from corresponding palladium iodide complex PdI₂(κ²-P,C-L₅) (5). The reaction of the former complex with p-toluenesulfonic acid (p-TsOH) gave the corresponding bis-tosylate complex Pd(OTs)₂(κ²-P,C-L₅) (7). All new complexes have been characterized by multinuclear NMR spectroscopy and elemental analyses. In addition the solid-state structures of 1b·DMF, 2b·2DMF, 3a, 3b·DMF, 4a, 4b, and 6·CHCl₃·2H₂O have been determined by single crystal X-ray structure analyses. The palladium acetate complexes 3a/b, 4a/b, and 6 have been employed to catalyze the oxidative homocoupling reaction of terminal alkynes in acetonitrile chemoselectively yielding the corresponding 1,4-di-substituted 1,3-diyne in the presence of p-benzoquinone (BQ). The highest catalytic activity in the presence of BQ has been obtained with 6, while within the series of palladium-bis(NHC) complexes, 4b, featured with a n-propylene-bridge and the bulky N-1-naphthalenemethyl substituents, revealed as the most active compound. Hence, this latter precursor has been employed for analogous coupling reaction carried out in the presence of air pressure instead of BQ, yielding lower substrate conversion when compared to reaction performed in the presence of BQ. The important role of the ancillary ligand acetate in the course of the catalytic coupling reaction has been proved by variable-temperature NMR studies carried out with 6 and 7′ under catalytic reaction conditions.     

A study on the binding of two water-soluble tetrapyridinoporphyrazinato copper(II) complexes to DNA

Interaction of N,N′,N″,N-tetramethyltetra-2,3-pyridinoporphyrazinatocopper(II), ([Cu(2,3-tmtppa)]⁴⁺) and N,N′,N″,N-tetramethyltetra-3,4-pyridinoporphyrazinatocopper(II), ([Cu(3,4-tmtppa)]⁴⁺) with calf thymus DNA was studied in 1 mM phosphate buffer and low ionic strength (5 mM NaCl) at various temperatures by UV-visible and circular dichroism (CD) spectroscopies and viscometric method. The binding constants were determined from the changes in the visible part of porphyrazine complexes spectra using SQUAD software. The values of K have been obtained (7.9±0.4)×10⁴ and (2.2±0.1)×10⁵ M⁻¹ for [Cu(2,3-tmtppa)]⁴⁺ and [Cu(3,4-tmtppa)]⁴⁺, respectively at 27 °C. The higher affinity of 3,4-isomer of Cu complex towards DNA with respect to the 2,3-isomer was attributed to favorable external positioning of the cationic charges in former, which enables superior interaction with the DNA duplex. The thermodynamic parameters (ΔG°, ΔH°, ΔS°) were calculated by van't Hoff equation. The enthalpy and entropy changes were determined, +34.2±3.6 kJ mol⁻¹ and +207.8±12.70 J mol⁻¹ K⁻¹ for [Cu(2,3-tmtppa)]⁴⁺ and +49.7±2.1 kJ mol⁻¹ and +267.8±7.9 J mol⁻¹ K⁻¹ for [Cu(3,4-tmtppa)]⁴⁺. The existence of extensive hypochromicity, large red shift and negative CD in the visible part of [Cu(3,4-tmtppa)]⁴⁺ spectra suggested an intercalation binding mode. Analysis of the moderate hypochromicity, red shift and bisignate CD in the Q-band absorption region of [Cu(2,3-tmtppa)]⁴⁺ spectra possibly led us to the coexistence of intercalation and outside binding modes. The influence of the ionic strength on the binding parameters and binding modes was investigated. The results show that increase in ionic strength causes the decrease in the binding constants. It was also concluded that increase in ionic strength affects the binding characteristics of positively charged complexes with DNA.

The increase in DNA viscosity in the presence of Cu–tmtppa complexes is attributed to the lengthening of DNA helix due to the intercalation. This result is consistent with conclusions obtained from the spectroscopic techniques.     

Synthesis of some new N,N′-diarylsubstituted methylene-bis-dihydro-2H-1,3-benzoxazines

The synthesis of a new series of six-membered N,N′-diarylsubstituted methylene-bis-dihydro-2H-1,3-benzoxazines （5a-e） was achieved in excellent yields by Mannich-type condensation of N,N′-diarylsubstituted methylene-bis-o-hydroxybenzyl amines （4a- e） with formaldehyde in chloroform at reflux. These amines （4a-e） were obtained by the reduction of N, Nr-diarylsubstituted methylene-bis-o-hydroxybenzyl imines （3a-e） with NaBH4, which inturn were obtained by the condensation of methylene-bissalicylaldehyde （2） with various substituted arylamines.     

Electrosynthesis in a microemulsion using a novel cobaloxime catalyst

[Bis[μ-[(2,3-butanedione dioximato)(2-)-O:O′]]tetrafluorodiborato(2-)-N,N′,N″,N]cobalt (COBF, 1) was used as a catalyst for the conversion of trans-1,2-dibromocyclohexane (DBCH) to cyclohexene and the photoelectrochemical cyclisation of 2-(4-bromobutyl)-2-cyclohexen-1-one (BBC) to trans-1-decalone 2 in a microemulsion. Voltammetry showed clear evidence of catalytic behaviour and bulk electrolysis showed larger turnover numbers for both reactions when compared with the same system using vitamin B_12a as catalyst. For BBC, improved turnover may result from a relatively weak carbon–cobalt bond in the alkylcobalt intermediate of 1, and from better partition of 1 into the organic phase in which reactant BBC resides.     

Synthesis, X-ray structure and anti-corrosion activity of two silver(I) pyrazino complexes

Two new silver(I) pyrazine complexes [Ag₂(ampyz)(NO₃)₂]_n, 1 and {[Ag(2,3-pyzdic)](NO₃)}_n, 2 (where ampyz = aminopyrazine, and 2,3-pyzdic = 2,3-pyrazinedicarboxamide) were synthesized and structurally characterized by X-ray single crystal structure analysis. Complex 1 has a 2D sheet structure through both bridging μ_O,O′-(NO₃) groups and μ_N,N′-pyrazine moieties. A 3D structure with a characteristic (10,3)-d or 10³-utp net is formed through extensive hydrogen bonding. Complex 2 has a 1D chain structure through bridging μ_N,N′-pyrazine moieties. Strong hydrogen bonds further connect these chains to extend the dimensionality to a 3D network structure. The complexes were tested as corrosion inhibitors for mild steel in 0.1 M nitric acid medium using potentiodynamic polarization technique. Both complexes are of mixed type corrosion inhibitors with dominant anodic effect. The inhibition efficiencies are 68% and 50% for complexes 1 and 2, respectively. The inhibition mechanisms of both inhibitors are mainly due to adsorption of the inhibitor molecules on the surface of mild steel. All data were compared and fitted to the kinetic-thermodynamic model. The binding constants K are 3263 and 1147 for complexes 1 and 2, respectively.     

Co(III) complexes of Me-salpn and Me-salbn and the ring size effect on the coordination modes and electrochemical properties: The crystal structures of trans-[Co(Me-salpn)(py)2]PF6 and cis-α-[Co(Me-salbn)(4-Mepy)2]BPh4 · 4-Mepy

The synthesis and characterization of a series of cobalt(III) complexes of the general type [Co(N₂O₂)(L₂)]⁺ are described. The N₂O₂ Schiff base ligands used are Me-salpn (H₂Me-salpn = N,N′-bis(methylsalicylidene)-1,3-propylenediamine) (1–3) and Me-salbn (H₂Me-salbn = N,N′-bis(methylsalicylidene)-1,4-butylenediamine) (4–5). The two ancillary ligands L include: pyridine (py) 1, 3-metheylpyridine (3-Mepy) 2, 1-methylimidazole (1-MeIm) 3, 4-methylpyridine (4-Mepy) 4 and pyridine (py) 5. These complexes have been characterized by elemental analyses, IR, UV–Vis, and ¹H NMR spectroscopy. The crystal structures of trans-[Co^III(Me-salpn)(py)₂]PF₆, 1, and cis-α-[Co^III(Me-salbn)(4-Mepy)₂]BPh₄ · 4-Mepy, 4, have been determined by X-ray diffraction. Examination of the solution and crystalline structures revealed that the outer coordination sphere of the complexes exerts a noticeable influence on the inner coordination sphere of the Co(III) ion. The electrochemical reduction of these complexes at a glassy carbon electrode in acetonitrile solution indicates that the first reduction process corresponding to Co^III–Co^II is electrochemically irreversible, which is accompanied by the dissociation of the axial (R-py)–cobalt bonds. It has also been observed that the Co(III) state is stabilized with increasing the flexibility of the ligand environment.     

A ratiometric chemosensor for fluorescent determination of Hg based on a new porphyrin-quinoline dyad

Quinolin-8-ol p-[10′,15′,20′-triphenyl-5′-porphyrinyl]benzoate (1) was synthesized for the first time and developed as a ratiometric fluorescent chemosensor for recognition of Hg²⁺ ions in aqueous ethanol with high selectivity. The 1–Hg²⁺ complexation quenches the fluorescence of porphyrin at 646 nm and induces a new fluorescent enhancement at 603 nm. The fluorescent response of 1 towards Hg²⁺ seems to be caused by the binding of Hg²⁺ ion with the quinoline moiety, which was confirmed by the absorption spectra and ¹H NMR spectrum. The fluorescence response fits a Hill coefficient of 1 (1.0308), indicating the formation of a 1:1 stoichiometry for the 1–Hg²⁺ complex. The analytical performance characteristics of the chemosensor were investigated. The sensor shows a linear response toward Hg²⁺ in the concentration range of 3 × 10⁻⁷ to 2 × 10⁻⁵ M with a limit of detection of 2.2 × 10⁻⁸ M. Chemosensor 1 shows excellent selectivity to Hg²⁺ over transition metal cations except Cu²⁺, which quenches the fluorescence of 1 to some extent when it exists at equal molar concentration. Moreover, the chemosensor are pH-independent in 5.0–9.0 and show excellent selectivity for Hg²⁺ over transition metal cations.     

New functional triethoxysilanes as iodide sources for dye-sensitized solar cells

Three new triethoxysilanes bearing quaternary ammonium alkyl iodides are reported, N,N,N-triethyl-3-(triethoxysilyl)propan-1-aminium iodide 1, N,N,N-triheptyl-3-(triethoxysilyl)propan-1-aminium iodide 2 and N,N,N-tridodecyl-3-(triethoxysilyl)propan-1-aminium iodide 3. ¹H and ¹³C NMR spectroscopy and electrospray mass spectrometry were used to confirm the synthesis of pure products. Electrolytes based on these ionic liquids were developed and their performance in dye-sensitized solar cells (DSSCs) evaluated. The electrolytes incorporated 1 and 2 (in 30–60 wt%) as iodide sources together with I₂ (0.08 M), 0.1 M guanidinium thiocyanate and 0.5 M tert-butylpyridine in acetonitrile (AN); and I₂ (0.15 M) and N-methylbenzimidazole (0.5 M) for 2-methoxyproprionitrile (MPN) as co-solvent. Testing of DSSCs to analyze the influence of chain length (ethyl and heptyl) on cell efficiency revealed that, for silanes concentration of 1 M, electrolyte B (based on 2 in AN) and electrolyte C (based on 1 in MPN) gave the best cell efficiency at simulated full sunlight (AM 1.5, 1000 W m⁻²) illumination (5.0–5.3%). At 0.1 Sunlight (AM 1.5, 100 W m⁻²), electrolyte B gave the best performance of 8.0%. High open circuit voltages (V_OC) of 750–850 mV were achieved for a number of quite efficient cells (5–6%). For silane 2, variation of the I⁻/I₂ ratio and total silane content (1–2 M 2) on DSSC efficiency gave a consistent efficiency of 8.0% at 0.1 Sunlight. At full sunlight, the cell efficiency decreased as the silane concentration increased from 1 M (5.0%) to 2 M (3.7%), largely due to a drop in short circuit current.     

Direct electrochemical reduction of a bromo-propargyloxy ester at vitreous carbon cathodes in dimethylformamide

Cyclic voltammograms for the reduction of ethyl 2-bromo-3-(3^′,4^′-dimethoxyphenyl)-3-(propargyloxy)propanoate (1) at glassy carbon electrodes in dimethylformamide containing tetraalkylammonium salts exhibit three prominent waves corresponding to cleavage of the carbon–bromine bond and to subsequent reduction of ethyl trans-3-(3^′,4^′-dimethoxyphenyl)-prop-2-enoate (4). Controlled-potential electrolyses of 1 at potentials corresponding to reduction of the carbon–bromine bond afford 4 as the major product with an average yield of 56%. In the presence of a proton donor (1,1,1,3,3,3-hexafluoro-2-propanol), the quantity of 4 decreases slightly, and 2-(3^′,4^′-dimethoxyphenyl)-3-(ethoxycarbonyl)-4-methyl-2,5-dihydrofuran (3) is obtained in moderate amount (26%). We propose a mechanistic scheme whereby the major products are formed via a combination of one- and two-electron processes.     

Synthesis and spectroscopic properties of a new bipyridine-bipyrazoyl(pyridine)-thiocyanato-ruthenium(II) complex

The complex [Ru(II)(dcbpyH₂)(bdmpp)NCS](PF₆) (1) (where dcbpyH₂ is 2,2′-bipyridine-4,4′-dicarboxylic acid, bdmpp is 2,6-bis(3,5-dimethyl-N-pyrazoyl)pyridine,) is synthesized and characterized extensively by ¹H NMR and ¹³C NMR 1D and 2D, mass spectroscopy, cyclic voltammetry, electronic absorption spectroscopy and IR. The half-wave potential of the Ru(II)/Ru(III) redox couple was measured at E_1/2=+0.795 V versus Ag/AgCl in CH₃CN. The complex presents three intense metal-to-ligand charge transfer (MLCT) (d_M→π_L*) absorption bands centered at 383 (=21 300 M⁻¹ cm⁻¹), 432 (=22 400 M⁻¹ cm⁻¹) and 475 nm (=23 400 M⁻¹ cm⁻¹), respectively. The absorbance is extremely strong between 400 and 500 nm and even at 620 nm, the extinction coefficient is still high (=3768 M⁻¹ cm⁻¹). The strong π-acceptor property of the trans-isothiocyanate ligand compared with the Cl⁻ ligand is probably the cause of the blue-shift observed in complex 1. These properties make the complex potentially promising for the photosensitization process. The incorporation of TiO₂ photoelectrodes derivatized with this complex into a solar cell using a composite polymer/inorganic oxide solid-state electrolyte confirmed its sensitizing ability. Incident monochromatic photon-to-current conversion efficiency (IPCE) values of about 30% and overall energy conversion efficiency (η) of 1.7% were obtained.     

Synthesis and characterization of complexes of lanthanide nitrates with N,N′-dinaphthyl-N,N′-diphenyl-3,6-dioxaoctanediamide

Solid complexes of lighter lanthanide nitrates with N,N′-dinaphthyl-N,N′-diphenyl-3,6-dioxaoctanediamide (DDD), Ln(NO₃)₃(DDD) (Ln = La---Nd, Sm) have been prepared in non-aqueous media. These complexes have been characterized by elemental analysis, conductivity measurements, IR spectra, electronic spectra and TG-DTA techniques. In all the complexes, DDD and NO₃⁻ are coordinated to the lanthanide ions as tetradentate and bidentate ligands, respectively. The differences in the IR and electronic spectra between these complexes and lanthanide nitrate complexes with N,N,N′,N′-tetraphenyl-3,6-dioxaoctanediamide (TDD) are discussed.     

Fluorometric Determination of Trace Amounts of Fluoride Ion Using an Expanded Porphyrin

A highly selective and sensitive method of fluorometry is described for determination of the fluoride ion at the parts per billion level via the ion-pair complex formation of the fluoride ion with an expanded prophyrin [2,23-diethyl-8,17-bis(2-ethoxycarbonylethyl)-3,7,12,13,18,22-hexamethylsapphyrin (H₃sap)]. The ion-pair complex gives out an enhanced fluorescence intensity at 680 nm on excitation at 450 nm. Since the present method is based on a direct reaction of the fluoride ion with the sappyrin, a 200-fold amount of the aluminum (III) ion [10⁻⁴M (M = mol dm⁻³)] and a 2000-fold amount of the iron(III) ion (10⁻³M) over the fluoride ion did not interfere with determination of the fluoride ion at concentrations as low as 5 × 10⁻⁷M in the presence of 1,2-diaminocyclohexane-N,N,N′,N′-teraacetic acid. The proposed method was applied to determination of the fluoride ion in various water samples (tap water, river water, rain water, underground water, and hot spring water) and satisfactory results were obtained.     

2-Benzothiazolylthioacetic acid and 4,4′-bipyridine as ligands in designing low-dimensional coordination polymers: Synthesis, architectures and magnetic properties

The combined use of 4,4′-bipyridine (4,4′-bipy) and 2-benzothiazolylthioacetic acid (HBTTAA) as ligands with Mn(II), Cd(II), Co(II) and Cu(II) ions afforded six polymeric complexes, namely {[Mn₃(BTTAA)₄(4,4′-bipy)₄](ClO₄)₂ · 2H₂O}_n (1), [Mn(BTTAA)₂(4,4′-bipy)₂]_n (2), [Cd(BTTAA)₂(4,4′-bipy)₂]_n (3), [Cd(BTTAA)(4,4′-bipy)(NO₃)(H₂O)]_n (4), [Co(BTTAA)₂(4,4′-bipy)(H₂O)₂]_n (5) and [Cu(BTTAA)₂(4,4′-bipy)]_n (6). All these complexes have been characterized by a combination of analytical, spectroscopic and crystallographic methods. Complex 1 is a novel 2D network formed by two different 4⁴ grid networks, whereas isomorphous complexes 2 and 3 exhibit a 2Dl coordination architecture formed by the same 4⁴ grid network. In 4–6, extended 1D chains are formed, with the 4,4′-bipy molecules acting as rigid rod-like links between adjacent metal centers. The carboxylato groups of BTTAA in these complexes exhibit four different coordination modes, namely monodentate, chelating, bridging and bridging-chelating modes. The magnetic properties of 1, 2, 5 and 6 were investigated in the temperature range 2.0–300.0 K. Variable temperature magnetic susceptibility measurements show weak antiferromagnetic interactions in these complexes.