Equilibrium and kinetics of calcium–uranyl–carbonate adsorption on silica nanoparticles

Solvent extraction studies on the purification of uranium from zirconium rich sodium diuranate (SDU) feed was carried out using n-tri butyl phosphate (TBP) as extractant and n-decanol as phase modifier. The presence of Zr in SDU leached solution leads to the formation of third phase during liquid–liquid extraction of uranium which was successfully prevented by addition of n-decanol in 30% (v/v) TBP/n-dodecane mixture. A seven stage counter current extraction of SDU feed solution followed by five stage stripping were carried out using optimum concentration of phase modifier 15% n-decanol-30% TBP in n-dodecane as solvent. Based on the findings a process flow-sheet has been developed for the purification of SDU to nuclear grade ammonium diuranate.     

Effect of electrolyte additions and temperature on the structure self-organization of the water subsystem in water-supercritical Co<Subscript>2</Subscript>-NaCl ternary mixtures

The effect of electrolyte additions (6, 15, 23 wt % NaCl) and temperature (T 313–633 K, p 250 bar) on the structural state of the water subsystem in the water-rich phase of the water-supercritical CO₂-NaCl ternary system was studied by IR spectroscopy and the method of integral equations. With increasing salt concentration, the breaking effect of temperature on the structure of the water subsystem becomes weaker, and the fractions of H-bonded water n-mers are redistributed. In systems with a nonzero NaCl concentration, tetramers exist throughout the examined temperature range, and trimers become the main structural unit of the water subsystem at temperatures close to the critical point. The prevalent structural components of the system with 0 wt % NaCl near the critical point are dimers. The O?H bonds between water molecules and Cl?H bonds in the nearest surroundings of the anions make approximately equal contributions to the overall pattern of H bonds in the water subsystem.     

Phase Equilibrium States in the <Emphasis Type="Italic">n</Emphasis>-Dodecane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane System

A three-component system comprising cyclododecane and n-alkanes is studied by means of differential thermal analysis on a differential scanning microcalorimeter. It is concluded that the investigated system is of the eutectic type and the n-dodecane–n-hexadecane–cyclododecane eutectic mixture system is 73.0 wt % n-С₁₂Н₂₆, 9.0 wt % n-С₁₆Н₃₄, and 18.0 wt % С₁₂Н₂₄. Its melting point is found to be ?17.7°C.     

Investigation of cationic soapless P(St-<Emphasis Type="Italic">co</Emphasis>-DMAEMA) latex and its electrostatic adsorption of laponite

Cationic poly(styrene-co-N,N-dimethylaminoethyl methacrylate) (P(St-co-DMAEMA)) latexes were prepared in the absence of surfactant by using 2,2’ -azobis (2-methylpropionamidine) dihydrochloride (AIBA) as the initiator. The effects of the AIBA concentration, HCl/DMAEMA molar ratio and DMAEMA amount on the emulsion polymerization and the latex properties were investigated. The particle morphology and size, the zeta potential and the amino distribution of the P(St-co-DMAEMA) latexes were characterized by transmission electron microscope (TEM), dynamic light scattering (DLS) and conductometric titration, respectively. Results showed that the emulsion polymerization performed smoothly with high monomer conversion and narrow particle size distribution under the optimized conditions with AIBA concentration of 1 wt%, HCl/DMAEMA molar ratio of 1.2 and DMAEMA content of 5 wt%. The diameter of the dried latex particles decreased and the density of amino groups on the particle surfaces increased with increasing the DMAEMA content. The zeta potential of the P(St-co-DMAEMA) latexes was pH-dependent and the zero point was around at pH 7.2. A facile method was developed to fabricate P(St-co-DMAEMA)/laponite hybrid nanoparticles via electrostatic adsorption, in which the loading capacity of laponite platelets reached 17.7 wt%, and the resultant hybrid nanoparticles showed good thermal stability.     

Phase diagrams of diphenyl–<Emphasis Type="Italic">n</Emphasis>-dodecane and diphenyl–diphenyl oxide–<Emphasis Type="Italic">n</Emphasis>-dodecane systems

The phase equilibria in the binary diphenyl–n-dodecane and ternary diphenyl–diphenyl oxide–n-dodecane systems was studied by differential scanning calorimetry. The melting temperatures and eutectic compositions were determined. The physicochemical characteristics of eutectic alloys such as the flash point, density, and enthalpy of fusion were given. The kinematic viscosity of eutectic alloys was determined in the temperature range 25–50°C.     

Effect of molecular weight of poly-<Emphasis Type="Italic">N</Emphasis>-benzyl-<Emphasis Type="Italic">N,N</Emphasis>-dimethyl-<Emphasis Type="Italic">N</Emphasis>-methacryloyloxyethylammonium chloride on its complexation with sodium dodecyl sulfate

Complexation of a cationic polyelectrolyte, poly-N-benzyl-N,N-dimethyl-N-methacryloyloxyethylammonium chloride, with an ananionic surfactant, sodium dodecyl sulfate, in aqueous solutions is studied. The effect of the molecular weight of the polymer on phase separation in the system and on the stability, conformation, and surface activity of the polyelectrolyte-surfactant complexes is examined.     

Thermoresponsive behavior of water-salt solutions of a graft copolymer with a main polyimide chain and side poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

The water-salt solutions of the graft copolymer bearing a polyimide main chain and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains (M = 4.7 × 10⁵, the density of grafting with side chains z = 0.44) are studied by static and dynamic light scattering and turbidimetry. The solutions are investigated in a tenfold range of NaCl concentrations (from 0.015 to 0.15 mol/L) at the polymer concentration from 0.002 to 0.015 g/cm³ and pH from 8 to 12. The temperature dependences of the intensity of scattered light, optical transmission, hydrodynamic radius of scattering objects, and their concentrations in solutions are derived. The temperatures of phase separation onset T ₁ and end T ₂ are determined. It is shown that an increase in the salt content in solution leads to reduction in the polymer solubility and in temperatures T ₁ and T ₂. The watersalt solutions retain all the regularities of phase-separation temperature variation observed for aqueous solutions with change in the concentration of solution and pH of a medium: the values of T ₁ and T ₂ increase upon dilution and growth of acidity.     

Protolytic properties of <Emphasis Type="Italic">DL</Emphasis>-alanyl-<Emphasis Type="Italic">DL</Emphasis>-methionine and its complexation in aqueous solutions and micellar solutions

Dissociation constants of DL-alanyl-DL-methionine have been determined in water and micellar solutions of surfactants (anionic sodium n-dodecyl sulfate, cationic cetylpyridinium chloride, and nonionic Brij 35). It has been established that CuA⁺ and CuH_–1A complexes are formed in water and micellar solutions of sodium n-dodecyl sulfate, while CuA⁺, CuH_–1A, and Cu_–2A^– complexes are formed in micellar solutions of cetylpyridinium chloride and Brij 35. Stability of the complexes depends on micelle surface charge and degrees of binding of individual chemical forms by a micellar pseudophase.     

Resolution Mechanism and Characterization of an Ammonium Chloride-Tolerant,High-Thermostable,and Salt-Tolerant Phenylalanine Dehydrogenase from <Emphasis Type="Italic">Bacillus halodurans</Emphasis>

As phenylalanine dehydrogenase (PheDH) plays an important role in the synthesis of chiral drug intermediates and detection of phenylketonuria, it is significant to obtain a PheDH with specific and high activity. Here, a PheDH gene, pdh, encoding a novel BhPheDH with 61.0% similarity to the known PheDH from Microbacterium sp., was obtained. The BhPheDH showed optimal activity at 60 °C and pH 7.0, and it showed better stability in hot environment (40–70 °C) than the PheDH from Nocardia sp. And its activity and thermostability could be significantly increased by sodium salt. After incubation for 2 h in 3 M NaCl at 60 °C, the residual activity of the BhPheDH was found to be 1.8-fold higher than that of the control group (without NaCl). The BhPheDH could tolerate high concentration of ammonium chloride and its activity could be also enhanced by the high concentration of ammonium salts. These characteristics indicate that the BhPheDH possesses better thermostability, ammonium chloride tolerance, halophilic mechanism, and high salt activation. The mechanism of thermostability and high salt tolerance of the BhPheDH was analyzed by molecular dynamics simulation. These results provide useful information about the enzyme with high-temperature activity, thermostability, halophilic mechanism, tolerance to high concentration of ammonium chloride, higher salt activation and enantio-selectivity, and the application of molecular dynamics simulation in analyzing the mechanism of these distinctive characteristics.     

Theoretical calculations of high-pressure phases of NiF<Subscript>2</Subscript>: An ab initio constant-pressure study

We have studied the structural properties of the antiferromagnetic NiF₂ tetragonal structure with P4₂/mnm symmetry using density functional theory (DFT) under rapid hydrostatic pressure up to 400 GPa. For the exchange correlation energy we used the local density approximation (LDA) of Ceperley and Alder (CA). Two phase transformations are successfully observed through the simulations. The structures of XF₂-type compounds crystallize in rutile-type structure. NiF₂ undergoes phase transformations from the tetragonal rutile-type structure with space group P4₂/mnm to orthorhombic CaCl₂-type structure with space group Pnnm and from this orthorhombic phase to monoclinic structure with space group C2/m at 152 GPa and 360 GPa, respectively. These phase changes are also studied by total energy and enthalpy calculations. According to these calculations, we perdict these phase transformations at about 1.85 and 30 GPa.     

Magnetic,Electrical and Thermal Studies of Polypyrrole-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanocomposites

This research paper comprises of the synthesis of polypyrrole (PPy)-Fe₂O₃ nanocomposites by employing the in situ chemical oxidative polymerization method. The concentration of the filler material was adjusted between 10–50 wt % of PPy. The synthesized nanocomposites were characterized by using X-ray diffraction (XRD). Magnetic analysis and DC electrical conductivity of the samples were carried out using vibrating sample magnetometer (VSM) and two probe DC conductivity method, point towards magnetically active and electrically conductive samples. The magnetic parameters under applied magnetic field demonstrated that the values of coercivity (H _c ), saturation magnetization (M _s ) and remanence (M _r ) can be tailored by carefully controlling the amount of dopant material into the nanocomposites indicating their suitability for controllable switching devices and microwave absorption applications. The DC electrical conductivity showed an increase up to 20 wt % of filler material and thereafter a decrease in the conductivity of nanocomposites with increase in filler content is observed. Thermogravimetric analysis (TGA) showed an increase in thermal stability with an increase in ferrite content in nanocomposites.     

Effect of the structure of the <Emphasis Type="Italic">ortho</Emphasis>, <Emphasis Type="Italic">meta</Emphasis>, and <Emphasis Type="Italic">para</Emphasis> isomers of perhydroterphenyl on their reactivity in heterogeneous catalytic dehydrogenation

The kinetics of the dehydrogenation of the individual ortho, meta, and para isomers of perhydroterphenyl and their mixtures over a (3 wt % Pt)/C catalyst has been investigated in a flow reactor at 280–340°C. The rate of the isomerization of the stereoisomers of the initial substrate (perhydroterphenyl) and terphenyl dehydrogenation products has an effect on the hydrogen release kinetics. The highest reactivity in isomerization is shown by the ortho isomer. The largest amount of hydrogen (7.0 wt %) is released in the dehy-drogenation of perhydro-meta-terphenyl and perhydro-para-terphenyl, whose conversion at 320°C is 96%.     

Master curves for elastic and plastic properties of highly concentrated emulsions

Critical comparison of dependences of elastic and plastic properties of highly concentrated emulsions (so-called “compressed” emulsions) on the concentration and droplet sizes is performed. The studied emulsions of water-in-oil type are so-called “liquid explosives.” They are characterized by different mean sizes and different droplet size distributions of the dispersed phase. Different average values (D _av, D ₃₂, and D ₄₃) are used as characteristics of droplet sizes. Experiments are carried out with emulsions of two concentrations. Aqueous phase (dispersed droplets) is presented by supercooled solutions of inorganic salt in water in a metastable state. The concentration limit of the existence of highly concentrated emulsions is determined by the condition of the closest packing of liquid droplets, which lies in the φ* = 0.77–0.80 range. In addition, there is a limiting value of the maximal size of droplets. This limiting value depends on the concentration and meets the requirement that droplets should be small enough for the solution to exist in a supercooled state. The elastic modulus and the yield stress of emulsions studied are proportional to the square of the reciprocal linear size of droplets, which contradicts some theoretical models, according to which these parameter should be proportional to the reciprocal size of droplets. Using the obtained experimental data, we constructed generalized dependences of the elastic modulus and the yield stress on the concentration and size of droplets. These characteristics are in good agreement with the experimental data.     

Molecular dynamics simulations of the characteristics of sodium carboxymethyl cellulose with different degrees of substitution in a salt solution

Sodium carboxymethyl cellulose (SCMC) with different degrees of substitution (DS) possesses structural characteristics and physicochemical properties that are important in broad areas of industrial applications. This reported work investigated the structural characteristics, including the effective length (L _ef), the radius of gyration (R _g), and the hydrodynamic radius (R _H), and the physicochemical properties, including intrinsic viscosity ([η]) and salt tolerance, of SCMC with a DS more than 1.0 in NaCl solution using molecular dynamics (MD) simulations. In the MD simulations, the DS of SCMC varied from 1.2 to 2.8, and the NaCl concentration varied from 0 to 1.4 mol/L. MD simulation results showed that with the increment of NaCl concentration, the L _ef (or R _g or R _H) of SCMC decreased; with the increment of the DS, the L _ef of SCMC increased. Also, the variation tendency of [η] in the NaCl solution was consistent with its L _ef (or R _g or R _H). It was noted that the salt tolerance (represented by D) of SCMC increased as the DS increased. In addition, the sharp variation of the D value of SCMC occurred in the range of DS of 1.6 to 2.0, which agreed with the reported experimental results. Radial distribution function analyses showed that the Na⁺ cations had a stronger interaction with the carboxyl groups in SCMC with lower DS when it was present in a salt solution of higher concentration, which also reasonably explained the variation of L _ef, R _g, R _H, [η], and D of SCMC in NaCl solution.     

A study of structural non-stoichiometry with respect to oxygen in <Emphasis Type="Italic">R</Emphasis>BaCo<Subscript>4</Subscript>O<Subscript>7+<Emphasis Type="Italic">x</Emphasis></Subscript> single crystals

Impurity-free RBaCo₄O_7+x (R = Y, Lu) crystals are grown and the evolution of their structure with varying oxygen concentration in the range 0 ≤ x ≤ 1.3 is studied. The structural features of the studied samples required to develop an extended strategy of the X-ray crystallographic experiment, which made it possible to obtain more accurate data on unit cell parameters and additional information on the features of superstructure modulation and diffuse scattering, along with the phase composition of crystalline samples. A crystal chemical analysis of the known structural models of RBaCo₄O_7+x is performed and suggestions are made about possible structural changes occurring when the oxygen concentration increases up to the limit.     

Effect of Sodium Dodecylbenzenesulfonate on the Association Behavior of Promethazine Hydrochloride in Aqueous/Electrolyte Solutions at Different Temperatures

The interaction between the amphiphilic phenothiazine drug promethazine hydrochloride (PMT) and an anionic surfactant sodium dodecylbenzenesulfonate has been investigated using the conductometric technique in the absence and presence of an inorganic salt (50 mmol·kg^?1 NaCl) at five different compositions and temperatures. PMT is employed for the cure of allergic symptoms. Different physicochemical parameters such as critical micellar concentration (cmc), thermodynamic, and micellar composition are evaluated and discussed in detail using regular solution theory (RST). The addition of salt decreased the surface charge of micelles, lowering the cmc values of the amphiphile. The interaction parameter (β) is negative at all temperatures and compositions indicating attractive interactions. Due to the presence of NaCl in mixed systems the attractive interaction (β) was further increased (β values more negative). The negative values of Gibbs energy (\( \Delta G^{0}_{\text{m}} \)) of mixing revealed the stability of the solution. Owing to the presence of NaCl, the \( \Delta G^{0}_{\text{m}} \) values are found to be more negative suggesting that the driving force for interaction was significantly increased and micellization more thermodynamically favorable.     

Toxicity of <Emphasis Type="Italic">Camellia sinensis</Emphasis>-Fabricated Silver Nanoparticles on Invertebrate and Vertebrate Organisms: Morphological Abnormalities and DNA Damages

Our understanding of nanoparticle toxicity and fate in the aquatic environment is still patchy. In the present study, the toxicity of silver nanoparticles coated by Camellia sinensis (Cs) leaf extract metabolites (Cs-AgNPs) was investigated in comparison with C. sinensis leaf extract and AgNO₃ on a micro-crustacean, Ceriodaphnia cornuta, and a fish Poecilia reticulata. 100% mortality of C. cornuta was observed post-exposure to AgNO₃ (40 µg/ml) if compared to the Cs leaf extract and Cs-AgNPs, showing 30 and 56% mortality at the same concentration, respectively. In P. reticulata 100% mortality was observed testing AgNO₃ and Cs-AgNPs post-exposure to 1 and 30 µg/ml, respectively. Light microscopy and CLSM images showed the accumulation of nanoparticles in the intestine of C. cornuta treated with Cs-AgNPs at 40 µg/ml. In addition, histological observations confirmed the abnormal tissue texture in nanoparticle-exposed P. reticulata, if compared to control fishes. Furthermore, C. cornuta and P. reticulata treated with Cs-AgNPs showed DNA damages compared to the control. Overall, these findings indicated relevant limits about the employ of silver-based pesticides in the environment, and also pointed out the Cs-AgNPs were less toxic to C. cornuta and P. reticulata if compared to silver ions.     

Hall effect,electrical and magnetic resistance in Cd<Subscript>3</Subscript>As<Subscript>2</Subscript> + MnAs (30%) composite at high pressures

Electrical resistivity ρ, Hall factor R _H, magnetic resistance (R _m–R ₀)/R ₀, and magnetic-field-dependent resistances were measured in 70 mol % Cd₃As₂ + 30 mol % MnAs composite at fixed values of high hydrostatic pressures (up to p ≤ 9 GPa). The ρ, R _H, and (R _m–R ₀)/R ₀ versus pressure curves feature a phase transition at p = 4–4.3 GPa. Field-dependent magnetic resistance features a negative pressure-induced trend.     

Phase transition temperature controllable poly(acrylamide-<Emphasis Type="Italic">co</Emphasis>-acrylic acid) nanocomposite physical hydrogels with high strength

Poly(acrylamide-co-acrylic acid) nanocomposite physical (P(AAm-co-AAc)NCP) hydrogels have been prepared through the in situ free radical solution polymerization based on a “single network, dual cross-linkings” strategy. The P(AAm-co-AAc) NCP hydrogels are composed of nanobrushes of P(AAm-co-AAc) chains grafted on the surface of vinylhybrid silica nanoparticles (VSNPs). In the hydrogel system, the VSNPs act as the “analogous chemical cross-linking points” once the hydrogen bonds formed between the P(AAm-co-AAc) chains of the nanobrushes, thus leading to the fabrication of high-strength P(AAm-co-AAc) NCP hydrogels. Compared with conventional thermosensitive P(AAm-co-AAc) hydrogels, the P(AAm-co-AAc) NCP hydrogels have a broader range of phase transition temperature, which can be adjusted by altering the monomer ratio, the VSNPs concentration, the addition of urea and N,N-dimethylacrylamide (DMAAm). At the same time, the mechanical properties of the P(AAm-co-AAc) NCP hydrogels have been improved significantly by the introduction of VSNPs. Furthermore, both the phase transition and the tensile strength of the P(AAm-co-AAc) NCP hydrogels are largely influenced when Fe³⁺ ions are introduced as the ionic crosslinkers into the hydrogel networks.     

Effects of concentration and pH on the thermosensitive behavior of a graft copolymer with polyimide backbone and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylamino-2-ethyl methacrylate) side chains

Aqueous solutions of the graft copolymer with a polyimide backbone and poly(N,N-dimethylamino-2-ethyl methacrylate) side chains with a molecular mass of M = 4.7 × 10⁵ and a grafting density of side chains of 0.44 are investigated by light scattering and turbidimetry. Solutions are studied in a wide concentration range of 0.0008–0.0250 g/cm³ at рН values varying from 2 to 12 for each concentration. The temperature dependences of optical transmission, scattered light intensity, and hydrodynamic radii of scattering objects are obtained. It is shown that the copolymer is thermosensitive only at pH > 8.0. A decrease in acidity of the medium at a fixed concentration of the copolymer is accompanied by a decline in temperatures corresponding to the onset and end of phase separation Т ₁ and Т ₂, leading to the narrowing of this interval. At constant рН values, temperatures Т ₁ and Т ₂ rise with solution dilution, while the phase transition interval becomes wider.