HL-1M装置边缘等离子体结构研究

描述HL-1M装置上几种典型放电中的边缘等离子体物理实验结果.利用马赫/朗缪尔6探针组、静电4探针组、20组三探针阵列研究了低杂波电流驱动、超声分子束注入、多发弹丸注入和中性束注入放电中的粒子约束性能、等离子体旋转和边缘静电雷诺胁强的变化对改善约束的影响.给出了雷诺胁强和极向相速度的关系.结果表明，雷诺胁强的径向变化可以自发产生托卡马克等离子体的剪切极向流.LHCD能使低密度放电的粒子约束增加1至2倍.弹丸注入后，粒子约束时间和极向旋转至少可增加1倍，而SMBI可使粒子约束时间增加约一个数量级并取得高性能等离子体. 关键词： 粒子约束 雷诺胁强 极向流剪切 马赫/朗缪尔6探针组     

HL-1M装置高气压分子束注入下边缘等离子体结构

在HL－1M装置的高气压分子束流注入加料实验中，利用提高注入口气源的气压来提高超声分子束流的速度和增加入射的粒子密度，从而改变了边缘电场、等离子体旋转速度和边缘静电雷诺胁强。利用马赫／郎缪尔探针组测量了HL－1M装置刮离层的边缘雷诺胁强、等离子体极向旋转、径向和极向电场的变化。实验结果表明：随着分子束流速度和粒子密度的增加，延伸了分子束流的注入深度，提高了注入速度和效率。     

HL-2A等离子体边缘极向剩余胁强的研究

首次报导了托卡马克等离子体边缘与湍流相关的极向剩余胁强剖面的测量结果。采用外中平面往复式静电探针阵列对HL-2A托卡马克边缘的极向湍流动量输运进行研究。在没有外部动量注入的欧姆放电下,剩余胁强为有限值、且其空间剖面在等离子体边缘具有明显的径向梯度,表明托卡马克等离子体边缘存在极向动量源。由动量源产生的动量主要以扩散形式向与剩余胁强相反的方向传播,最终的结果是等离子体边缘存在有限的雷诺胁强。在最后闭合磁面以内0.5~2cm区域,剩余胁强的梯度提供自发旋转的力矩,由该力矩引起的动量产生与由速度梯度引起的动量扩散共同导致了雷诺胁强出现负梯度,造成动量沉积,从而驱动极向平衡流。     

HL-2Aװ�ñ�Ե�Ŷ����Թ۲�

用中平面往复快速扫描6探针组观测HL-2A装置边缘等离子体的扰动特性。在一次放电中能测量到边缘等离子体参数的时空分布及其涨落量，雷诺胁强与极向流和带状流的关系，以及静电涨落驱动的粒子通量和热通量的径向变化。在多发弹丸注入(MPI)和多脉冲超声分子束注入(SMBI)条件下，研究了边缘参数的涨落和相关特性。实验结果表明：SMBI和MPI等注入手段改变了边缘的扰动特性；雷诺胁强的径向梯度可以驱动带状流，抑制湍流输运。     

HL-2A装置密度极限附近边缘剪切流和极向剩余胁强的实验研究

报道了HL-2A装置密度极限附近边缘剪切流和极向剩余胁强的最新实验研究结果。研究发现,等离子体密度向Greenwald密度靠近时,等离子体响应由绝热响应向流体动力学响应转变,导致湍流雷诺胁强中的非扩散项——剩余胁强降低,其径向梯度表征的等离子体自发旋转力矩显著降低。边缘极向流的湍性驱动降低进一步导致边缘E×B极向流剪切强度减弱。这些实验结果证明了湍流剩余胁强的降低是导致托卡马克密度极限附近边缘极向剪切层崩塌的关键因素。     

HL-1M装置边缘参数测量

在HL－1M装置上利用马赫／郎缪尔探针分别在欧姆放电,低杂波注入,中性束注入,离子回旋加热和电子回旋加热等情况下测量下刮离层和等离子体边缘的极向流速度和电场,得到了它们的径向分布,研究了LHW,NBI,ICRH和ECRH对改善等离子体约束性能,边缘粒子的径向传输的影响。     

HL-2Aƫ����λ�εı�Ե������������

通过中平面活动10探针组、往复快速扫描4探针和低杂波天线口的固定4探针测量了主等离子体边缘的温度、密度、悬浮电位、径向和极向电场、雷诺协强、径向和极向等离子体流速及其径向分布。用偏滤器靶板上的14组嵌入式静电3探针阵列测量了同一环向截面的内外中性化板上的电子温度、密度、悬浮电位及其分布。比较了在孔栏位形和偏滤器位形下边缘等离子体特性的差异,特别是两种位形下边缘温度和密度衰减长度的变化。分析了在多脉冲超声分子束加料和低杂波注入条件下的边界等离子体特性,以及雷诺协强的径向梯度与极向流和径向电场梯度与湍流损失的相互关系。     

HL-2A 装置的边缘参数测量

HL-2A 装置中平面边缘的等离子体特性通过磁力传动的马赫/ 雷诺协强/ 朗缪尔10 探针组进行了研究。10 探针组安装在可径向向里和向外移动, 并可绕轴旋转360^o 的传动杆上, 用于测量主等离子体边缘的温度、密度、悬浮电位、空间电位、径向和极向电场、湍流的雷诺协强、径向和极向等离子体流速及其径向分布。HL- 2A 装置的实验结果表明, 边缘等离子体扰动诱发的雷诺协强产生了边缘极向流; 雷诺协强的径向梯度驱动带状流抑制了湍流输运。     

弹丸和超声束流注入对边缘电场和等离子体旋转的影响

在欧姆放电，超声束流入和多发弹丸注入期间，利用马赫／朗缪尔探针组测量了ＨＬ－１Ｍ装置刮层和边界层的边缘电场和等离子体旋转；环向马赫数Ｍａ、极向流速度ｖｐｏｌ和电场Ｅｒ的径向分布是分别在超声束注入和多发弹丸注入期间进行测量的。     

HL—1M装置LHCD和ECRH实验的边缘流速和电场测量

在聚变装置中等离子体边界条件对整个等离子体约束性能的影响是非常敏感的。L－H模转换机制与边界径向电场Er,Er的梯度及极向旋转速度等参数密切相关。同时,边缘等离子体的径向输运与边缘极向电场Eθ的变化有关。在HL－1M装置中利用低杂波（LHW）注入和电子回旋加热（ECRH）实验,观测边缘等离子体流速和电场的径向分布和变化来研究改善约束性能与Eθ、Er,dEr/dr及边界涨落的关系。     

EDGE REYNOLDS STRESS STRUCTURE OF LOWER HYBRID WAVE INJECTION IN THE HL—1M PLASMA

The radial profiles of electrostatic Reynolds stress,plasma poloidal rotations,radial and poloidal electric fields have been measured in the plasma boundary region on the HL-1M tokamak using a multi-array of Mach/Langmuir probes.During experiments of lower hybrid wave current drive,the variations in LHW drive power xill cause changes in the edge electric field,poloidal rotation veloity and Reynolds stress.The results indicate that sheared poloidal flow can be generated in the edge plasma due to radially varied Reynolds stress.     

Measurements of Reynolds stress and turbulence in the boundary plasma of the HT-7 tokamak

Measurements of electric field fluctuations, Reynolds stress and poloidal flow have been performed in the boundary region of the HT-7 tokamak using a Langmuir probe array.Sheared radial electric field and poloidal flow have been found in the vicinity of the limiter and the turbulence has been clearly modified in this region. Furthermore,the electrostatic Reynolds stress component shows a radial gradient close to the velocity shear layer location.All results here indicate that the radial gradient of Reynolds stress may play an important role in the driving of poloidal flows in the plasma boundary region.     

Investigation on the drives of the poloidal flow in the ohmic and biased electrode experiments

The experimental investigation on the drives of the poloidal flow in KT-5 D tokamak are presented. It is found that the poloidal flow is the main contributor to the radial electric field, and the Reynolds stress can drive significant poloidal flows in ohmic discharges. The investigation on the relationship between the radial gradient of Reynolds stress and the poloidal flow in biasing discharges indicates that not only Reynolds stress but also the Lorentz's force can drive the poloidal flow.     

Role of reynolds stress-induced poloidal flow in triggering the transition to improved ohmic confinement on the HT-6M tokamak

Time and space resolved measurements of electrostatic Reynolds stress, radial electric field E(r), and plasma rotations have been performed across the transition to improved Ohmic confinement in the Hefei Tokamak-6M (HT-6M). The first experimental evidence of the correlation between the enhanced Reynolds stress gradient and the poloidal flow acceleration in the edge plasma is presented. The results indicate that the turbulence-induced Reynolds stress might be the dominant mechanism to create the sheared poloidal flow and E(r), which may further trigger the transition.     

Analyses of edge plasma characteristics in HL-2A

The edge plasma characteristics are studied by both a movable array of Mach/Reynolds stress/Langmuir 10-probes in the boundary region and the fixed flush probe arrays on the 4 divertor neutralization plates at the same toroidal cross-section in the HL-2A tokamak. The dependence of the Reynolds stress on poloidal flow in the edge plasma is analysed. The result indicates that the sheared poloidal flow in tokamak plasma can be induced by the radial gradient of Reynolds stress. In the divertor experiments of HL-2A, the profiles of the electron temperature, density and floating potential on divertor plates are measured by the flush probe arrays. The edge electron temperature in divertor configuration is higher than that in limiter configuration. The temperature asymmetry between outer and inner target plates is observed. The result of magnetic surface reconstructed from 18 Mirnov coils signals is presented. Both the particle recycling and the impurity flux in the bulk plasma during divertor discharges are discussed. Neutral gas pressure in divertor chamber, measured by fast ionization gauge during divertor discharge, is given.     

Observations of Edge Plasma on HL-2A Tokamak

The edge plasma characteristics are studied by a movable array of Mach/Reynolds stress/Langmuir 10-probes and fast reciprocating 4-probes in the boundary region. These probes can measure edge plasma temperature, density, poloidal electric field, radial electric field, Reynolds stress, poloidal rotation velocities and their profiles obtained by changing the radial positions of the probe array in different discharges. Measurement resuits are used to analyze plasma confinement, turbulent fluctuations and their correlation. The fixed flush 3-probe arrays are mounted on the 4-divertor neutralization plates at the same toroidal cross-section in divertor chamber. These probes are used to measure the profiles of the electron temperature, density and float potential in divertor chamber.