Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Calorimetric study and thermal analysis of crystalline nicotinic acid

As one primary component of Vitamin B₃, nicotinic acid [pyridine 3-carboxylic acid] was synthesized, and calorimetric study and thermal analysis for this compound were performed. The low-temperature heat capacity of nicotinic acid was measured with a precise automated adiabatic calorimeter over the temperature rang from 79 to 368 K. No thermal anomaly or phase transition was observed in this temperature range. A solid-to-solid transition at T _trs=451.4 K, a solid-to-liquid transition at T _fus=509.1 K and a thermal decomposition at T _d=538.8 K were found through the DSC and TG-DTG techniques. The molar enthalpies of these transitions were determined to be Δ_trs H _m=0.81 kJ mol^-1, Δ_fus H _m=27.57 kJ mol^-1 and Δ_d H _m=62.38 kJ mol^-1, respectively, by the integrals of the peak areas of the DSC curves. This revised version was published online in August 2006 with corrections to the Cover Date.     

Molar heat capacity and thermodynamic properties of 1,2-cyclohexane dicarboxylic anhydride [C8H10O3]

The molar heat capacity C _p,m of 1,2-cyclohexane dicarboxylic anhydride was measured in the temperature range from T=80 to 390 K with a small sample automated adiabatic calorimeter. The melting point T _m, the molar enthalpy Δ_fus H _m and the entropy Δ_fus S _m of fusion for the compound were determined to be 303.80 K, 14.71 kJ mol⁻¹ and 48.43 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _273.15] and [S _T-S _273.15] were derived in the temperature range from T=80 to 385 K with temperature interval of 5 K. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetry (TG), when the process of the mass-loss was due to the evaporation, instead of its thermal decomposition.     

Heat capacities and thermodynamic properties of 2-benzoylpyridine (C12H9NO)

The heat capacities of 2-benzoylpyridine were measured with an automated adiabatic calorimeter over the temperature range from 80 to 340 K. The melting point, molar enthalpy, Δ_fusH^m, and entropy, Δ_fusS^m, of fusion of this compound were determined to be 316.49±0.04 K, 20.91±0.03 kJ mol^–1 and 66.07±0.05 J mol^–1 K^–1, respectively. The purity of the compound was calculated to be 99.60 mol% by using the fractional melting technique. The thermodynamic functions (H_T–H_298.15) and (S_T–S_298.15) were calculated based on the heat capacity measurements in the temperature range of 80–340 K with an interval of 5 K. The thermal properties of the compound were further investigated by differential scanning calorimetry (DSC). From the DSC curve, the temperature corresponding to the maximum evaporation rate, the molar enthalpy and entropy of evaporation were determined to be 556.3±0.1 K, 51.3±0.2 kJ mol^–1 and 92.2±0.4 J K^–1 mol^–1, respectively, under the experimental conditions.     

Thermochemical studies on the thioproline

The combustion energy of thioproline was determined by the precision rotating-bomb calorimeter at 298.15 K to be Δ_c U= –2469.30±1.44 kJ mol^–1. From the results and other auxiliary quantities, the standard molar enthalpy of combustion and the standard molar enthalpy of formation of thioproline were calculated to be Δ_c H _m ^θC₄H₇NO₂S, (s), 298.15 K= –2469.92±1.44 kJ mol^–1 and Δ_f H _m ^θC₄H₇NO₂S, (s), 298.15K= –401.33±1.54 kJ mol^–1.     

Thermophysical Investigations of the Polymorphous Phases of Calcium Carbonate

1. Results of thermodynamic and kinetic investigations for the different crystalline calcium carbonate phases and their phase transition data are reported and summarized (vaterite: V; aragonite: A; calcite: C). A→C: T _tr=455±10°C, Δ_tr H=403±8 J mol^–1 at T _tr, V→C: T _tr=320–460°C, depending on the way of preparation,Δ_tr H=–3.2±0.1 kJ mol^–1 at T _tr,Δ_tr H=–3.4±0.9 kJ mol^–1 at 40°C, S _V ^Θ= 93.6±0.5 J (K mol)^–1, A→C: E _A=370±10 kJ mol^–1; XRD only, V→C: E _A=250±10 kJ mol^–1; thermally activated, iso- and non-isothermal, XRD 2. Preliminary results on the preparation and investigation of inhibitor-free non-crystalline calcium carbonate (NCC) are presented. NCC→C: T _tr=276±10°C,Δ_tr H=–15.0±3 kJ mol^–1 at T _tr, T _tr – transition temperature, Δ_tr H – transition enthalpy, S ^Θ – standard entropy, E _A – activation energy. 3. Biologically formed internal shell of Sepia officinalis seems to be composed of ca 96% aragonite and 4% non-crystalline calcium carbonate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamic investigation of several natural polyols

The low-temperature heat capacity C _p,m of erythritol (C₄H₁₀O₄, CAS 149-32-6) was precisely measured in the temperature range from 80 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-liquid phase transition was found at T=390.254 K from the experimental C _p-T curve. The molar enthalpy and entropy of this transition were determined to be 37.92±0.19 kJ mol⁻¹ and 97.17±0.49 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _298.15] and [S _T-S _298.15], were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The standard molar enthalpy of combustion and the standard molar enthalpy of formation of the compound have been determined: Δ_c H _m⁰(C₄H₁₀O₄, cr)= −2102.90±1.56 kJ mol⁻¹ and Δ_f H _m⁰(C₄H₁₀O₄, cr)= − 900.29±0.84 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. DSC and TG measurements were performed to study the thermostability of the compound. The results were in agreement with those obtained from heat capacity measurements.     

Thermodynamic investigation of room temperature ionic liquid

The molar heat capacities of the room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIBF₄) were measured by an adiabatic calorimeter in temperature range from 80 to 390 K. The dependence of the molar heat capacity on temperature is given as a function of the reduced temperature X by polynomial equations, C _P,m (J K^–1 mol^–1)= 195.55+47.230 X–3.1533 X ²+4.0733 X ³+3.9126 X ⁴ [X=(T–125.5)/45.5] for the solid phase (80~171 K), and C _P,m (J K^–1 mol^–1)= 378.62+43.929 X+16.456 X ²–4.6684 X ³–5.5876 X ⁴ [X=(T–285.5)/104.5] for the liquid phase (181~390 K), respectively. According to the polynomial equations and thermodynamic relationship, the values of thermodynamic function of the BMIBF₄ relative to 298.15 K were calculated in temperature range from 80 to 390 K with an interval of 5 K. The glass translation of BMIBF₄ was observed at 176.24 K. Using oxygen-bomb combustion calorimeter, the molar enthalpy of combustion of BMIBF₄ was determined to be Δ_c H _m ^o= – 5335±17 kJ mol^–1. The standard molar enthalpy of formation of BMIBF₄ was evaluated to be Δ_f H _m ^o= –1221.8±4.0 kJ mol^–1 at T=298.150±0.001 K.     

Standard molar enthalpies of formation and sublimation of <Emphasis Type="Italic">N</Emphasis>-phenylphthalimide

The standard (p ⁰=0.1 MPa) molar enthalpy of formation, Δ_f H ⁰ _m, for crystalline N-phenylphthalimide was derived from its standard molar enthalpy of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as –206.0±3.4 kJ mol^–1. The standard molar enthalpy of sublimation, Δ^g _cr H ⁰ _m , at T=298.15 K, was derived, from high temperature Calvet microcalorimetry, as 121.3±1.0 kJ mol^–1. The derived standard molar enthalpy of formation, in the gaseous state, is analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

Thermodynamic investigation of room temperature ionic liquid

The molar heat capacities of the room temperature ionic liquid 1-butylpyridinium tetrafluoroborate (BPBF₄) were measured by an adiabatic calorimeter in temperature range from 80 to 390 K. The dependence of the molar heat capacity on temperature is given as a function of the reduced temperature X by polynomial equations, C _p,m [J K⁻¹ mol⁻¹]=181.43+51.297X −4.7816X ²−1.9734X ³+8.1048X ⁴+11.108X ⁵ [X=(T−135)/55] for the solid phase (80–190 K), C _p,m [J K⁻¹ mol⁻¹]= 349.96+25.106X+9.1320X ²+19.368X ³+2.23X ⁴−8.8201X ⁵ [X=(T−225)/27] for the glass state (198–252 K), and C _p,m[J K⁻¹ mol⁻¹]= 402.40+21.982X−3.0304X ²+3.6514X ³+3.4585X ⁴ [X=(T−338)/52] for the liquid phase (286–390 K), respectively. According to the polynomial equations and thermodynamic relationship, the values of thermodynamic function of the BPBF₄ relative to 298.15 K were calculated in temperature range from 80 to 390 K with an interval of 5 K. The glass transition of BPBF₄ was observed at 194.09 K, the enthalpy and entropy of the glass transition were determined to be ΔH _g=2.157 kJ mol⁻¹ and ΔS _g=11.12 J K⁻¹ mol⁻¹, respectively. The result showed that the melting point of the BPBF₄ is 279.79 K, the enthalpy and entropy of phase transition were calculated to be ΔH _m = 8.453 kJ mol⁻¹ and ΔS _m=30.21 J K⁻¹ mol⁻¹. Using oxygen-bomb combustion calorimeter, the molar enthalpy of combustion of BPBF₄ was determined to be Δ_c H _m⁰ = −5451±3 kJ mol⁻¹. The standard molar enthalpy of formation of BPBF₄ was evaluated to be Δ_f H _m⁰ = −1356.3±0.8 kJ mol⁻¹ at T=298.150±0.001 K.     

Thermochemical studies of phthalimide and two N-alkylsubstituted phthalimides (ALKYL=ETHYL AND n-PROPYL)

The standard (p⁰=0.1 MPa) molar enthalpies of formation, Δ_fH_m⁰, for crystalline phthalimides: phthalimide, N-ethylphthalimide and N-propylphthalimide were derived from the standard molar enthalpies of combustion, in oxygen, at the temperature 298.15 K, measured by static bomb-combustion calorimetry, as, respectively, – (318.0±1.7), – (350.1±2.7) and – (377.3±2.2) kJ mol^–1. The standard molar enthalpies of sublimation, Δ_cr^gH_m⁰, at T=298.15 K were derived by the Clausius-Clapeyron equation, from the temperature dependence of the vapour pressures for phthalimide, as (106.9±1.2) kJ mol^–1 and from high temperature Calvet microcalorimetry for phthalimide, N-ethylphthalimide and N-propylphthalimide as, respectively, (106.3±1.3), (91.0±1.2) and (98.2±1.4) kJ mol^–1. The derived standard molar enthalpies of formation, in the gaseous state, are analysed in terms of enthalpic increments and interpreted in terms of molecular structure.     

Low-temperature heat capacities and standard molar enthalpy of formation of the complex

Low-temperature heat capacities of a solid complex Zn(Val)SO₄·H₂O(s) were measured by a precision automated adiabatic calorimeter over the temperature range between 78 and 373 K. The initial dehydration temperature of the coordination compound was determined to be, T _D=327.05 K, by analysis of the heat-capacity curve. The experimental values of molar heat capacities were fitted to a polynomial equation of heat capacities (C _p,m) with the reduced temperatures (x), [x=f (T)], by least square method. The polynomial fitted values of the molar heat capacities and fundamental thermodynamic functions of the complex relative to the standard reference temperature 298.15 K were given with the interval of 5 K. Enthalpies of dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] (Δ_sol H _m,l ⁰) and the Zn(Val)SO₄·H₂O(s) (Δ_sol H _m,2 ⁰) in 100.00 mL of 2 mol dm^–3 HCl(aq) at T=298.15 K were determined to be, Δ_sol H _m,l ⁰=(94.588±0.025) kJ mol^–1 and Δ_sol H _m,2 ⁰=–(46.118±0.055) kJ mol^–1, by means of a homemade isoperibol solution–reaction calorimeter. The standard molar enthalpy of formation of the compound was determined as: Δ_f H _m ⁰ (Zn(Val)SO₄·H₂O(s), 298.15 K)=–(1850.97±1.92) kJ mol^–1, from the enthalpies of dissolution and other auxiliary thermodynamic data through a Hess thermochemical cycle. Furthermore, the reliability of the Hess thermochemical cycle was verified by comparing UV/Vis spectra and the refractive indexes of solution A (from dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] mixture in 2 mol dm^–3 hydrochloric acid) and solution A’ (from dissolution of the complex Zn(Val)SO₄·H₂O(s) in 2 mol dm^–3 hydrochloric acid).     

Enthalpies of Absorption and Solubility of Carbon Dioxide in Aqueous Polyamine Solutions

The enthalpies of absorption and solubility at T=298.15 K of carbon dioxide in aqueous solutions of bis-(3-dimethylaminopropyl)amine (CAS RN: [6711-48-4]) are reported in this paper. It was observed that the saturation loading of the CO₂ is α=2.9 mol CO₂/mol TMBPA, which is close to the theoretical value, α⁰=3 mol CO₂/mol TMBPA. The molar heat of absorption of CO₂ is independent of the polyamine concentration of the solutions and the amount of CO₂ absorbed and was calculated to be Δ_abs H _m=–44 (±2) kJ mol^–1 CO₂. This revised version was published online in July 2006 with corrections to the Cover Date.     

The crystal polymorphs of metazachlor

Five crystal polymorphs of the herbicide metazachlor (MTZC) were characterized by means of hot stage microscopy, differential scanning calorimetry, IR- and Raman spectroscopy as well as X-ray powder diffractometry. Modification (mod.) I, II and III° can be crystallized from solvents and the melt, respectively, whereas the unstable mod. IV and V crystallize exclusively from the super-cooled melt. Based on the results of thermal analysis and solvent mediated transformation studies, the thermodynamic relationships among the polymorphic phases of metazachlor were evaluated and displayed in a semi-schematic energy/temperature-diagram. At room temperature, mod. III° (T _fus =76°C, Δ_fus H _III =26.6 kJ mol^-1) is the thermodynamically stable form, followed by mod. II (T _fus =80°C, Δ_fus H _II =23.0 kJ mol^-1) and mod. I (T _fus =83°C, Δ_fus H _II=19.7 kJ mol^-1). These forms are enantiotropically related showing thermodynamic transition points at ~55°C (T _{trs, III/II}), ~60°C (T _{trs, III/I}) and ~63°C (T _{trs, II/I}). Thus mod. I is the thermodynamically stable form above 63°C, mod. III° below 55°C and mod. II in a small window between these temperatures. Mod. IV (T _fus =72-74°C, Δ_fus H _II =18.7 kJ mol^-1) and mod. V (T _fus =65°C) are monotropically related to each other as well as to all other forms. The metastable mod. I and II show a high kinetic stability. They crystallize from solvents, and thus these forms can be present in commercial samples. Since metazachlor is used as an aqueous suspension, the use of the metastable forms is not advisable because of a potential transformation to mod. III°. This may result in problematic formulations, due to caking and aggregation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Low-temperature heat capacities and standard molar enthalpy of formation of aspirin

Molar heat capacities (C _p,m) of aspirin were precisely measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 383 K. No phase transition was observed in this temperature region. The polynomial function of C _p,m vs. T was established in the light of the low-temperature heat capacity measurements and least square fitting method. The corresponding function is as follows: for 78 K≤T≤383 K, C _p,m/J mol^-1 K^-1=19.086X ⁴+15.951X ³-5.2548X ²+90.192X+176.65, [X=(T-230.50/152.5)]. The thermodynamic functions on the base of the reference temperature of 298.15 K, {ΔH _T -ΔH _298.15} and {S _T-S _298.15}, were derived. Combustion energy of aspirin (Δ_c U _m) was determined by static bomb combustion calorimeter. Enthalpy of combustion (Δ_c H ^o _m) and enthalpy of formation (Δ_f H ^o _m) were derived through Δ_c U _m as - (3945.26±2.63) kJ mol^-1 and - (736.41±1.30) kJ mol^-1, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamic investigation of several natural polyols (II)

The low-temperature heat capacity C _p,m of sorbitol was precisely measured in the temperature range from 80 to 390 K by means of a small sample automated adiabatic calorimeter. A solid-liquid phase transition was found at T=369.157 K from the experimental C _p-T curve. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 355 K, C _p,m/J K⁻¹ mol⁻¹=170.17+157.75x+128.03x ²-146.44x ³-335.66x ⁴+177.71x ⁵+306.15x ⁶, x= [(T/K)−217.5]/137.5. In the temperature range of 375 to 390 K, C _p,m/J K⁻¹ mol⁻¹=518.13+3.2819x, x=[(T/K)-382.5]/7.5. The molar enthalpy and entropy of this transition were determined to be 30.35±0.15 kJ mol⁻¹ and 82.22±0.41 J K⁻¹ mol⁻¹ respectively. The thermodynamic functions [H _T-H _298.15] and [S _T-S 298.15], were derived from the heat capacity data in the temperature range of 80 to 390 K with an interval of 5 K. DSC and TG measurements were performed to study the thermostability of the compound. The results were in agreement with those obtained from heat capacity measurements.     

Some thermodynamic aspects of nitrides in materials science

The energies of combustion in fluorine of gallium nitride and indium nitride in wurzite crystalline structure have been measured in a two-compartment calorimetric bomb, and new standard molar enthalpies of formation have been calculated: Δ_fH_m⁰(GaN(cr) 298.15 K)= –(163.7±4.2) kJ mol^–1 and Δ_fH_m⁰(InN(cr) 298.15 K)= –(146.5±4.6) kJ mol^–1 . Comparison with the recommended values of the Δ_fH_m⁰ nitrides from the literature is also presented.     

Standard enthalpy of formation of 3,4,5-trimethoxybenzoic acid

The energy of combustion of crystalline 3,4,5-trimethoxybenzoic acid in oxygen at T=298.15 K was determined to be -4795.9±1.3 kJ mol^-1 using combustion calorimetry. The derived standard molar enthalpies of formation of 3,4,5-trimethoxybenzoic acid in crystalline and gaseous states at T=298.15 K, Δ_fH_m ^Θ (cr) and Δ_fH_m ^Θ (g), were -852.9±1.9 and -721.7±2.0 kJ mol^-1, respectively. The reliability of the results obtained was commented upon and compared with literature values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Heat capacity,enthalpy and entropy of calcium niobates

Heat capacity and enthalpy increments of calcium niobates CaNb₂O₆ and Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies of the molar heat capacity in the form C _pm=200.4+0.03432T−3.450·10⁶/T ² J K⁻¹ mol⁻¹ for CaNb₂O₆ and C _pm=257.2+0.03621T−4.435·10⁶/T ² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S _m⁰(CaNb₂O₆, 298.15 K)=167.3±0.9 J K⁻¹ mol⁻¹ and S _m⁰(Ca₂Nb₂O₇, 298.15 K)=212.4±1.2 J K⁻¹ mol⁻¹, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δ_f H ⁰(CaNb₂O₆, 298.15 K)= −2664.52 kJ mol^t-1 and Δ_f H ⁰(Ca₂Nb₂O₇, 298.15 K)= −3346.91 kJ mol⁻¹.     

Thermodynamic Properties of Hydrofullerene C60H36 from 5 to 340 K

The temperature dependence of the molar heat capacity (C⁰ _p) of hydrofullerene C₆₀H₃₆ between 5 and 340 K was determined by adiabatic vacuum calorimetry with an error of about 0.2%. The experimental data were used for the calculation of the thermodynamic functions of the compound in the range 0 to340 K. It was found that at T=298.15 K and p=101.325 kPa C⁰ _p (298.15)=690.0 J K⁻¹ mol⁻¹,H^o(298.15)−H^o(0)= 84.94 kJ mol⁻¹,S^o(298.15)=506.8 J K⁻¹ mol⁻¹, G^o(298.15)−H^o(0)= −66.17 kJ mol⁻¹. The standard entropy of formation of hydrofullerene C₆₀H₃₆ and the entropy of reaction of its formation by hydrogenation of fullerene C₆₀ with hydrogen were estimated and at T=298.15 K they were Δ_fS^o= −2188.4 J K⁻¹ mol⁻¹ and Δ_rS^o= −2270.5 J K⁻¹mol⁻¹, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.