Photoinduced and thermally induced cationic polymerizations using S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salts

A study of the photoinitiated and thermally initiated cationic polymerizations of several monomer systems with S,S‐dialkyl‐S‐(3,5‐dimethylhydroxyphenyl)sulfonium salt (HPS) photoinitiators bearing different lengths of alkyl chains on the positively charged sulfur atom has been conducted. HPS photoinitiators are capable of photoinitiating the cationic polymerization of a wide variety of epoxy and vinyl ether monomers directly on irradiation with short‐wavelength UV light. Aryl ketone photosensitizers are effective in extending the spectral response of these photoinitiators into the long‐wavelength UV region. Kinetic studies with real‐time infrared spectroscopy show that HPS photoinitiators exhibit good efficiency in the polymerization of epoxide and vinyl ether monomers. Comparative studies also demonstrate that S,S‐dimethyl‐S‐(3,5‐dimethyl‐2‐hydroxyphenyl)sulfonium salts are more active photoinitiators than their isomeric S,S‐dimethyl‐S‐(3,5‐dimethyl‐4‐hydroxyphenyl)sulfonium salt counterparts. Both types of HPS photoinitiators display reversible photolysis as a result of facile termination reactions that take place between the growing chains ends with the photogenerated sulfur ylides. Preliminary studies have shown that HPS photoinitiators can also be employed as thermal initiators for the cationic ring‐opening polymerization of epoxides at moderate temperatures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2570–2587, 2003     

Photoinitiated cationic polymerization of epoxy alcohol monomers

A series of epoxy alcohols were prepared by simple, straightforward methods. These compounds were very reactive monomers that polymerized rapidly on UV irradiation in the presence of cationic photoinitiators. The kinetics of the cationic photopolymerization of these monomers were studied with diaryliodonium salt photoinitiators and real‐time IR spectroscopy. The rate of epoxide ring‐opening polymerization was enhanced markedly by the presence of the hydroxy group. Using model compounds, the monomers were shown to polymerize via an activated monomer mechanism. Simple epoxy alcohols polymerized to give polymers with a hyperbranched structure. The novel monomers also were observed to accelerate the rate of the photopolymerization of mono‐ and multifunctional epoxides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 389–401, 2000     

Modification of photoinitiated cationic epoxide polymerizations by sulfides

The addition of sulfides has a marked effect on the rates of onium salt induced photoinitiated cationic ring‐opening polymerizations of epoxide monomers. Various behaviors have been observed that depend on the structure of the sulfide. Dialkyl sulfides strongly inhibit the photopolymerizations of these monomers, whereas diaryl sulfides have a retarding effect on the photopolymerizations. Real‐time infrared spectroscopy and optical pyrometry have been employed as analytical methods to probe the kinetic effects of the addition of a variety of sulfides on cationic epoxide ring‐opening photopolymerizations. A mechanism is proposed that involves the formation of sulfonium salts as intermediates. The observations made in this study have important implications for cationic photopolymerizations in general and for photoinitiated cationic ring‐opening polymerizations of epoxides in particular. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2504–2519, 2005     

Aminothiazonaphthalic anhydride derivatives as photoinitiators for violet/blue LED‐Induced cationic and radical photopolymerizations and 3D‐Printing resins

The cations and radicals produced in aminothiazonaphthalic anhydride derivatives (ATNAs) combined with an iodonium salt, N‐vinylcarbazole, amine, or chloro triazine initiate the ring‐opening cationic polymerization of epoxides and the free radical polymerization of acrylates under LEDs at 405 or 455 nm. The photoinitiating ability of these novel photoinitiating systems is higher than that of the well‐known camphorquinone‐based systems. An example of the high reactivity of the new proposed photoinitiator is also provided in resins for 3D‐printing using a LED projector@405 nm. The chemical mechanisms are investigated by steady‐state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1189–1196     

Photoinitiated cationic polymerization of limonene 1,2‐oxide and α‐pinene oxide

Limonene 1,2‐oxide (LMO) and α‐pinene oxide (α‐PO) are two high reactivity biorenewable monomers that undergo facile photoinitiated cationic ring‐opening polymerizations using both diaryliodonium salt and triarylsufonium salt photoinitiators. Comparative studies showed that α‐PO is more reactive than LMO, and this is because it undergoes a simultaneous double ring‐opening reaction involving both the epoxide group and the cyclobutane ring. It was also observed that α‐PO also undergoes more undesirable side reactions than LMO. The greatest utility of these two monomers is projected to be as reactive diluents in crosslinking photocopolymerizations with multifunctional epoxide and oxetane monomers. Prototype copolymerization studies with several difunctional monomers showed that LMO and α‐PO were effective in increasing the reaction rates and shortening the induction periods of photopolymerizations of these monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Reactivity of oxetane monomers in photoinitiated cationic polymerization

Studies of the onium salt photoinitiated cationic ring‐opening polymerizations of various 3,3‐disubstituted oxetane monomers have been conducted with real‐time infrared spectroscopy and optical pyrometry. The polymerizations of these monomers are typified by an extended induction period that has been attributed to the presence of a long‐lived tertiary oxonium ion intermediate formed by the reaction of the initially formed secondary oxonium ion with the cyclic ether monomer. Because the extended induction period in the photopolymerization of these monomers renders oxetane monomers of limited value for many applications, methods have been sought for its minimization or elimination. Three general methods have been found effective in markedly shortening the induction period: (1) carrying out the photopolymerizations at higher temperatures, (2) copolymerizing with more reactive epoxide monomers, and (3) using free‐radical photoinitiators as synergists. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3205–3220, 2005     

Phenothiazine photosensitizers for onium salt photoinitiated cationic polymerization

Phenothiazine compounds bearing a wide range of different substituents are excellent photosensitizers for onium salt cationic photoinitiators. These photosensitizers are generally operative in the mid‐ and long‐range regions of the UV spectrum and are especially useful for enhancing the rate of photoinitiated cationic polymerization carried out utilizing both filtered and broadband UV emission sources. In this article, the syntheses of several different substituted phenothiazines are described and the ability of these compounds to photosensitize the photolysis of different onium salt photoinitiators is evaluated. Attempts were made to correlate the structure and spectral characteristics of the phenothiazines with their efficiency of photosensitization in the cationic photopolymerizations of several typical epoxide and vinyl ether monomers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1187–1197, 2001     

Naphthalimide‐phthalimide derivative based photoinitiating systems for polymerization reactions under blue lights

Naphthalimide‐phthalimide derivatives (NDPDs) have been synthesized and combined with an iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine to produce reactive species (i.e., radicals and cations). These generated reactive species are capable of initiating the cationic polymerization of epoxides and/or the radical polymerization of acrylates upon exposure to very soft polychromatic visible lights or blue lights. Compared with the well‐known camphorquinone based systems used as references, the novel NDPD based combinations employed here demonstrate clearly higher efficiencies for the cationic polymerization of epoxides under air as well as the radical polymerization of acrylates. Remarkably, one of the NDPDs (i.e., NDPD2) based systems is characterized by an outstanding reactivity. The structure/reactivity/efficiency relationships of the investigated NDPDs were studied by fluorescence, cyclic voltammetry, laser flash photolysis, electron spin resonance spin trapping, and steady state photolysis techniques. The key parameters for their reactivity are provided. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 665–674     

Synthesis and cationic photopolymerization of monomers based on nopol

Starting with nopol [(R)‐(−)‐2‐(2′‐hydroxyethyl)‐6,6‐dimethyl‐8‐oxatricyclo[3.1.1.1^2,3]octane, I] as a substrate, two new, interesting monomers, allyl nopol ether epoxide III and nopol 1‐propenyl ether epoxide IV, were prepared. The photoinitiated cationic polymerizations of these two monomers as well as several other model compounds were studied using real‐time infrared spectroscopy. Surprisingly, the rates of epoxide ring‐opening polymerization of both monomers were enhanced as compared to those of the model compounds. Two different mechanisms which involve the free radical induced decomposition of the diaryliodonium salt photoinitiator were proposed to explain the rate acceleration effects. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1199–1209, 1999     

Photoinduced cationic ring‐opening frontal polymerizations of oxetanes and oxiranes

The photoinitiated cationic ring‐opening polymerizations of certain epoxides and 3,3‐disubstituted oxetanes display the characteristics of frontal polymerizations. When irradiated with UV light, these monomers display a marked induction period, during which little conversion of the monomer to the polymer takes place. The local application of heat to an irradiated monomer sample results in polymerization that occurs as a front propagating rapidly throughout the entire reaction mass. For the characterization of these frontal polymerizations, the use of a new monitoring technique, employing optical pyrometry, has been instituted. This method provides a simple, rapid means of following these fast polymerizations and quantitatively determining their frontal velocities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1630–1646, 2004     

Free radical accelerated cationic polymerizations

The simultaneous photoinitiated cationic polymerizations of epoxides and vinyl ethers in the presence of diaryliodonium salt photoinitiators results in an acceleration of the ring‐opening epoxide polymerization and a deceleration of the vinyl ether polymerization. These effects are seen both in mixtures of the two monofunctional monomers as well as in hybrid monomers which bear vinyl ether and epoxide groups in the same molecule. A combination of two mechanisms have been proposed to account for these effects. The reversible conversion of alkoxycarbenium to oxiranium ions results in a two‐stage reaction in which first, the epoxide, then the vinyl ether polymerization takes place. Free radical chain induced decomposition of the diaryliodonium salt produces a large incremental number of carbenium ion species which results in the acceleration effect.     

Structure/reactivity/photoinitiation ability relationships in novel benzo pyrazolo (or imidazo) isoquinolinone derivatives upon visible light LEDs

Isoquinolinone derivatives bearing amino‐ or nitro‐ substituent (IQNs) have been synthesized as photoinitiators and combined with various additives (i.e., iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)?1,3,5‐triazine) to initiate ring‐opening cationic polymerizations (CP) or free radical polymerizations under exposure to visible LEDs (e.g., LEDs at 405 nm or 455 nm, or cold white LED) or a halogen lamp. Compared to the well‐known camphorquinone‐based systems, the novel IQNs‐based combinations employed here demonstrate higher efficiencies for the CP of epoxides. The photochemically generated reactive species (i.e., cations and radicals) from the IQNs‐based systems have been investigated by steady state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin trapping techniques. The structure/reactivity/photoinitiating ability relationships of IQNs‐based combinations are also discussed; the crucial role of the excited state lifetimes of the photoinitiators to ensure efficient quenching by additives is clearly underlined. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1806–1815     

“Kick‐Starting” oxetane photopolymerizations

In the presence of small amounts of 2,2‐dialkyl‐, 2,2,3‐trialkyl‐, or 2,2,3,3‐tetraalkyl substituted epoxides such as isobutylene oxide, 1,2‐limonene oxide, and 2,2,3,3,‐tetramethyl oxirane, the photoinitiated cationic ring‐opening polymerizations of 3,3‐disubstituted oxetanes are dramatically accelerated. The acceleration affect was attributed to an increase in the rate of the initiation step of these latter monomers. Both mono‐ and disubstituted oxetane monomers are similarly accelerated by the above‐mentioned epoxides to give crosslinked network polymers. The potential for the use of such “kick‐started” systems in applications such as coatings, adhesives, printing inks, dental composites and in three‐dimensional imaging is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2934–2946     

Design and synthesis of highly reactive photopolymerizable epoxy monomers

The synthesis of a series of novel cationically photopolymerizable epoxide monomers bearing benzyl, allyl, and propargyl acetal and ether groups that can stabilize free radicals was carried out. These monomers display enhanced reactivity in cationic photopolymerization in the presence of certain onium salt photoinitiators. Specifically, this article describes schemes for the synthesis of cycloaliphatic epoxy monomers bearing free‐radical stabilizing groups. During UV irradiation of an onium salt cationic photoinitiator, the aryl radicals that are generated abstract labile protons present in such monomers to generate the corresponding carbon‐centered radicals. Subsequently, these radicals can interact with the onium salt by a redox mechanism to induce the decomposition of these salts. The overall result is that additional cationic species are generated by this mechanism that increase the rate and extent of the cationic ring‐opening polymerization of the epoxide monomer. An investigation of the photopolymerizations of the monomers prepared during this work was carried out using Fourier transform real‐time infrared spectroscopy, and conclusions were drawn with respect to the relationship between their structures and reactivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2385–2395, 2001     

Chemistry of 2‐oxazolines: A crossing of cationic ring‐opening polymerization and enzymatic ring‐opening polyaddition

Chemistry of 2‐oxazolines is involved in the polymer synthesis fields of cationic ring‐opening polymerization (CROP) and enzymatic ring‐opening polyaddition (EROPA), although both polymerizations look like a quite different class of reaction. The key for the polymerization to proceed is combination of the catalyst (initiator) and the design of monomers. This article describes recent developments in polymer synthesis via these two kinds of polymerizations to afford various functional polymers having completely different structures, poly(N‐acylethylenimine)s via CROP and 2‐amino‐2‐deoxy sugar unit‐containing oligo and polysaccharides via EROPA, respectively. From the viewpoint of reaction mode, an acid‐catalyzed ring‐opening polyaddition (ROPA) is considered to be a crossing where CROP and EROPA meet. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1251–1270, 2010     

Blue LED light‐sensitive benzo pyrazolo (or imidazo) isoquinolinone derivatives in high‐performance photoinitiating systems for polymerization reactions

Isoquinolinone derivatives (IQ) have been synthesized and combined with different additives (an amine, 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine, an iodonium salt, or N‐vinylcarbazole) to produce reactive species (i.e. radicals and cations) being able to initiate the radical polymerization of acrylates, the cationic polymerization of epoxides, the thiol‐ene polymerization of trifunctional thiol/divinylether, and the synthesis of epoxide/acrylate interpenetrated polymer network IPN upon exposure to very soft polychromatic visible lights, blue laser diode or blue LED lights. Compared with the use of camphorquinone based systems, the novel combinations employed here ensures higher monomer conversions (～50–60% vs. ～15–35%) and better polymerization rates in radical polymerization. The chemical mechanisms are studied by steady‐state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin trapping techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 567–575     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

Supramolecular diaryliodonium salt‐crown ether complexes as cationic photoinitiators

Diaryliodonium salts spontaneously form crystalline 1:1 supramolecular complexes at room temperature in good to excellent yields with 18‐crown‐6 ether and its cyclohexano‐ and benzo‐substituted analogs. The complexes were characterized using IR, UV, MS, ¹H, and ¹³C‐NMR spectroscopy and by single crystal X‐ray crystallography. The analytical data obtained were consistent with a structure in which the positively charged iodine atom of diaryliodonium cation is positioned above and over the center of the crown ether ring with the positively charged iodine atom coordinated to the crown ether oxygen atoms. The diaryliodonium salt‐crown ether complexes are photosensitive and were used to carry out the photoinitiated cationic polymerizations of a number of mono‐ and difunctional monomers. During irradiation with UV light, the supramolecular complexes undergo photolysis with the generation of a Brønsted acid and with the concomitant release of the crown ether. When used as photoinitiators, the crown ether that is released markedly influences the kinetics of the subsequent cationic polymerization of the monomer. Further studies demonstrated that the photolysis of diaryliodonium salt‐crown ether supramolecular complexes can be photosensitized using typical‐electron transfer photosensitizers. Free radical‐promoted photosensitization using typical unimolecular free radical photoinitiators such as 2,2‐dimethoxy‐2‐phenylacetophenone also takes place readily. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Dual photo‐ and thermally initiated cationic polymerization of epoxy monomers

Selective inhibition of the photoinitiated cationic ring‐opening polymerization of epoxides by dialkyl sulfides has provided dual systems that can be “activated” by UV irradiation and then subsequently be polymerized by the application of heat. It is proposed that dialkyl sulfides terminate the initial or growing polyether chains at an early stage to form stable trialkylsulfonium salts. These systems are dormant at room temperature but on thermolysis, the sulfonium salts are capable of reinitiating ring‐opening polymerization. These dual photo‐ and thermal cure systems have potential applications in adhesives, potting resins, and composites. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6750–6764, 2006     

Redox initiated cationic polymerization of oxetanes

3,3‐Disubstituted oxetane monomers were found to undergo rapid, exothermic redox initiated cationic ring‐opening polymerization in the presence of a diaryliodonium or triarylsulfonium salt oxidizing agent and a hydrosilane reducing agent. The redox reaction requires a noble metal complex as a catalyst and several potential catalysts were evaluated. The palladium complex, Cl₂(COD)Pd^II, was observed to provide good shelf life stability while, at the same time, affording high reactivity in the presence of a variety of hydrosilane reducing agents. A range of structurally diverse oxetane monomers undergo polymerization under redox cationic conditions. When a small amount of an alkylated epoxide was added as a “kick‐start” accelerator to these same oxetanes, the redox initiated cationic polymerizations were extraordinarily rapid owing to the marked reduction in the induction period. A mechanistic interpretation of these results is offered. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1854–1861