Photopolymerization reactions initiated by a visible light photoinitiating system: Cyanine dye/borate salt/1,3,5‐triazine

New three‐component photoinitiating systems consisting of a cyanine dye, borate salt, and a 1,3,5‐triazine derivative were investigated by measuring their photoinitiation activities and through fluorescence quenching experiments. Polymerization kinetic studies based on the microcalorimetric method revealed a significant increase in polymerization rate when the concentration of n‐butyltriphenylborate salt or the 1,3,5‐triazine derivative were increased. The photo‐induced electron transfer process between electron donor and electron acceptor was studied by means of fluorescence quenching and SrEt change of the fluorescence intensity. The experiments performed documented that an increase of the n‐butyltriphenylborate salt concentration dramatically increases the rate of dye fluorescence quenching, whereas the increasing of the 1,3,5‐triazine derivative concentration slows down the consumption of the dye. We conclude that the primary photochemical reaction involves an electron transfer from the n‐butyltriphenylborate anion to the excited singlet state of the dye, followed by the reaction of the 1,3,5‐triazine derivative with the resulting dye radical to regenerate the original dye. This reaction simultaneously produces a triazinyl radical anion derived from the 1,3,5‐triazine, which undergoes the carbon‐halogen bond cleavage yielding radicals active in initiation of a free radical polymerization chain. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3626–3636, 2007     

N‐methylpicolinium derivatives as the coinitiators in photoinitiating systems for vinyl monomers polymerization

Five N‐methylpicolinium derivatives were investigated to test their abilities to function as second coinitiators in free radical photopolymerization initiated by N,N′‐diethylcarbocyanine—n‐butyltriphenylborate photoredox pair ( P19B2 ). As it is shown by the kinetic data, an addition of picolinium derivatives into P19B2 photoinitiating system visibly increases the efficiency of photoinitiation. The results suggest that the rates of photoinitiation depend on the rate of the picolyl radicals formation. The redox potentials of tested N‐methylpicolinium derivatives were measured and the calculation of free energy change for the possible electron transfer reactions between all components of the system (both stable and transient individuals) was performed. The results suggest that cyanine dyes are able to start a specific chain of an electron transfer reactions involving different coinitiators (borate salt and N‐alkylpicolinium derivatives), giving as a result one photon—two‐radicals photochemical response. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 576–588, 2009     

Polymerization of vinyl monomers photoinitiated by p‐nitroaniline: Photoinitiation mechanism

The polymerization rate of methyl methacrylate photoinitiated by p‐nitroacetanilide in the presence of triethylamine was measured as a function of the amine concentration in different media. The polymerization is more efficient in nonpolar medium (benzene/monomer). ESR studies show the formation of a nitro and an amino free radical, which are formed by photoinduced proton transfer from the amine to the nitro group. The amine radical is the active species that adds to the monomer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2269–2273, 2000     

Styrylpyridinium borate salts as dye photoinitiators of free‐radical polymerization

Styrylpyridinium borate salts photoinitiate free‐radical polymerization. The rate of photopolymerization depends on the ΔG^o of electron transfer between a borate anion and a styrypyridinium cation. This latter value was estimated for a series of styrylpyridinium borate salts, and the relationship between the rate of polymerization and the free energy of activation gives the dependence predicted by the classical theory of electron transfer. This relation was independently observed for the two series of styrylpyridinium borate salts tested—one for the photoredox pair with an iodine atom and the second without. Styrylpyridinium borate salts were stable at ambient temperature in the formulations prepared for the photopolymerization experiments. Photopolymerization initiated by the photoredox pairs tested proceeded by the conventional mechanism in which bimolecular termination occurs by a reaction between two macroradicals. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1433–1440, 2002     

New heterobicationic hemicyanine dyes: Synthesis,spectroscopic properties,and photoinitiating ability

This article describes the synthesis, spectroscopic properties, and free‐radical photoinitiation ability of new heterobicationic hemicyanine dyes. A new synthetic strategy for the preparation of unsymmetrical cyanine dyes has been developed, based on 2‐methylbenzothiazole derivative quaternization by 3‐pyridinium‐1‐bromopropane bromide and subsequent condensation of the resulting product with p‐(N,N‐dimethylamino)benzaldehyde. The tested dyes possess in one molecule two quaternary nitrogen atoms; that is, they are heterobicationic in nature. Novel hemicyanine dyes have been tested as visible‐light photoinitiators of vinyl monomer polymerization. Heterobicationic hemicyanine dyes paired with n‐butyltriphenylborate anions are very efficient photoinitiators of the free‐radical polymerization of trimethylolpropane triacrylate when irradiated with the visible emission of an argon‐ion laser. The photoinitiating abilities of the novel photoredox pairs are compared with the photoinitiation properties of their monocationic equivalent {3‐methyl‐2‐[4‐(N,N‐dimethylamino)styryl]benzothiazolium n‐butyltriphenylborate} as well as a Rose Bengal derivative (a typical triplet‐state photoinitiator). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6345–6359, 2006     

Synergistic interaction of epoxides and N‐vinylcarbazole during photoinitiated cationic polymerization

A kinetic study was conducted of the independent photoinitiated cationic polymerization of a number of epoxide monomers and mixtures of these monomers with N‐vinylcarbazole. The results show that these two different classes of monomers undergo complex synergistic interactions with one another during polymerization. It was demonstrated that N‐vinylcarbazole as well as other carbazoles are efficient photosensitizers for the photolysis of both diaryliodonium and triarylsulfonium salt photoinitiators. In the presence of large amounts of N‐vinylcarbazole, the rates of the cationic ring‐opening photopolymerization of epoxides are markedly accelerated. This effect has been ascribed to a photoinitiated free‐radical chain reaction that results in the oxidation of monomeric and polymeric N‐vinylcarbazole radicals by the onium salt photoinitiators to generate cations. These cations can initiate the ring‐opening polymerization of the epoxides, leading to the production of copolymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3697–3709, 2000     

Fluorescence probes based on 9‐acridyl derivatives of aromatic amines for monitoring free‐radical polymerization

The series of 9‐acridyl derivatives of aromatic amines have been investigated as fluorescent probes for monitoring the progress of free‐radical polymerization. This study on the changes in the fluorescence intensity and spectroscopic shift of specific compounds was carried out during thermally initiated polymerization of methyl methacrylate and photoinitiated polymerization of 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol triacrylate‐1‐methyl‐2‐pyrrolidonone mixture. The purpose of this investigation was to find a relationship between the changes in the shape and intensity of fluorescent probes and the degree of monomer conversion into a polymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3481–3488, 2002     

Kinetics of the styrene emulsion polymerization using n‐dodecyl mercaptan as chain‐transfer agent

The kinetics of the styrene emulsion polymerization using n‐dodecyl mercaptan as chain‐transfer agent was studied. It was found that the chain‐transfer agent (CTA) had no effect on polymerization rate but substantially affected the molecular weight distribution (MWD). The efficiency of the CTA in reducing the MWD was lowered by the mass‐transfer limitations. The process variables affecting CTA mass transfer were investigated. A mathematical model for the process was developed. The outputs of the model include monomer conversion, particle diameter, number of polymer particles, and number‐average and weight‐average molecular weights. The model was validated by fitting the experimental data. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4490–4505, 2000     

The cyanine dye/trichloromethyl‐1,3,5‐triazine/thiols in two‐ and three‐component photoinitiating systems for free radical polymerization

The new photoinitiating systems for free radical polymerization of multifunctional monomers composed of carbocyanine dye, 1,3,5‐triazine derivative and heteroaromatic mercaptan were described. It was shown, that the polymerization abilities of such photoinitiatng systems are comparable with those observed for well‐known cyanine borate two‐component photoinitiating systems. The fluorescence quenching rate constants of tested sensitizer was about 2 × 10¹⁰ M^?1s^?1. Basing on the results of laser flash photolysis, the mechanism of the photochemical reactions occuring in the three‐component photoinitiating system was proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4243–4251, 2010     

Formation of activation‐free,selectively bioconjugatable poly(N‐acryloxysuccinimide‐co‐oligoethylene glycol methyl ether methacrylate) films by surface‐initiated ARGET ATRP

Activation‐free copolymeric films possessing high selectivity to target proteins and low biofouling background are prepared via controlled radical polymerization. The copolymeric films are generated by surface‐initiated activators regenerated by electron transfer atom transfer radical polymerization (SI‐ARGET ATRP) of N‐acryloxysuccinimide (NAS) and oligo(ethylene glycol) methyl ether methacrylate (OEGMEMA) by controlling the molar feed ratio of the two monomers. The formation of copolymeric films is characterized by ellipsometry, contact angle goniometry, FTIR spectroscopy, and X‐ray photoelectron spectroscopy. The prepared copolymeric films are biotinylated without an activation step. Biotin–streptavidin association is employed as a model system to investigate both selective binding and the relevant signal‐to‐noise (S/N) ratio. When the molar feed ratio of NAS and OEGMEMA is 2:8, the copolymeric film is optimized to give the highest S/N ratio (339.8) according to surface plasmon resonance studies. The highly selective bioconjugation is used to generate micropatterns of rhodamine‐conjugated streptavidin on the copolymeric film. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 329–337     

Photopolymerization of 1,6‐hexanedioldiacrylate initiated by three‐component systems based on N‐arylphthalimides

Three‐component photoinitiators comprised of an N‐arylphthalimide, a diarylketone, and a tertiary amine were investigated for their initiation efficiency of acrylate polymerization. The use of an electron‐deficient N‐arylphthalimide resulted in a greater acrylate polymerization rate than an electron‐rich N‐arylphthalimide. Triplet energies of each N‐arylphthalimide, determined from their phosphorescence spectra, and the respective rate constants for triplet quenching by the N‐arylphthalimide derivatives (acquired via laser flash photolysis) indicated that an electron–proton transfer from an intermediate radical species to the N‐arylphthalimide (not energy transfer from triplet sensitization) is responsible for generating the initiating radicals under the conditions and species concentrations used for polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4009–4015, 2004     

End‐group fidelity in nitroxide‐mediated living free‐radical polymerizations

In this study, new nitroxides based on the 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐oxy skeleton were used to examine chain‐end control during the preparation of polystyrene and poly(t‐butyl acrylate) under living free‐radical conditions. Alkoxyamine‐based initiators with a chromophore attached to either the initiating fragment or the mediating nitroxide fragment were prepared, and the extent of the incorporation of the chromophores at either the initiating end or the propagating chain end was determined. In contrast to 2,2,6,6‐tetramethyl piperidinoxy (TEMPO), the incorporation of the initiating and terminating fragment into the polymer chain was extremely high. For both poly(t‐butyl acrylate) and polystyrene with molecular weights less than or equal to 70,000, incorporations at the initiating end of greater than 97% were observed. At the terminating chain end, incorporations of greater than 95% were obtained for molecular weights less than or equal to 50,000. The level of incorporation tended to decrease slightly at higher molecular weights because of the loss of the alkoxyamine propagating unit, which had important consequences for block copolymer formation. These results clearly show that these new α‐H nitroxides could control the polymerization of vinyl monomers such as styrene and t‐butyl acrylate to an extremely high degree, comparable to anionic and atom transfer radical polymerization procedures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4749–4763, 2000     

Cationic photopolymerization of tetrahydrofuran: A mechanistic study on the use of a sulfonium salt–phenothiazine initiation system

The kinetics aspects of the photoinitiated polymerization of tetrahydrofuran with triphenylsulfonium hexafluoroarsenate and sensitized by phenothiazine was studied under visible‐light irradiation. A photosensitizer mechanism was proposed involving electron transfer from phenothiazine to the triphenylsulfonium salt, forming a cation radical, the true precursor of the polymerization. An initial complex in the ground state between the phenothiazine and the triphenylsulfonium was formed prior to the excitation, and this complex actually activated the photopolymerization rate. The polymerization conversion presented an S‐shaped curve, suggesting an induction period caused by the existence of two pathways responsible for the beginning of the polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 46–55, 2001     

Macroinitiator halide effects in galactoglucomannan‐mediated single electron transfer‐living radical polymerization

Chloro (Cl)‐ and bromo (Br)‐functionalized macroinitiators were successfully prepared from the softwood hemicellulose O‐acetylated galactoglucomannan (AcGGM) and then explored and evaluated with respect to their ability and efficiency of initiating single electron transfer‐living radical polymerization (SET‐LRP). Both halogenated species effectively initiate SET‐LRP of an acrylate and a methacrylate monomer, respectively, yielding brushlike AcGGM graft copolymers, where the molecular weights are accurately controlled via the monomer:macroinitiator ratio and polymerization time over a broad range: from oligomeric to ultrahigh. The nature of the halogen does not influence the kinetics of polymerization strongly, however, for acrylate graft polymerization, AcGGM‐Cl gives a somewhat higher rate constant of propagation, while methacrylate grafting proceeds slightly faster when the initiating species is AcGGM‐Br. For both monomers, the macroinitiator efficiency is superior in the case of AcGGM‐Br. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Cu(0)/2,6‐bis(imino)pyridines catalyzed single‐electron transfer‐living radical polymerization of methyl methacrylate initiated with poly(vinylidene fluoride‐co‐chlorotrifluoroethylene)

A series of 2,6‐bis(imino)pyridines, as common ligands for late transition metal catalyst in ethylene coordination polymerization, were successfully employed in single‐electron transfer‐living radical polymerization (SET‐LRP) of methyl methacrylate (MMA) by using poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) (P(VDF‐co‐CTFE)) as macroinitiator with low concentration of copper catalyst under relative mild‐reaction conditions. Well‐controlled polymerization features were observed under varied reaction conditions including reaction temperature, catalyst concentration, as well as monomer amount in feed. The typical side reactions including the chain‐transfer reaction and dehydrochlorination reaction happened on P(VDF‐co‐CTFE) in atom‐transfer radical polymerization process were avoided in current system. The relationship between the catalytic activity and the chemical structure of 2,6‐bis(imino)pyridine ligands was investigated by comparing both the electrochemical properties of Cu(II)/2,6‐bis(imino)pyridine and the kinetic results of SET‐LRP of MMA catalyzed with different ligands. The substitute groups onto N‐binding sites with proper steric bulk and electron donating are desirable for both high‐propagation reaction rate and C? Cl bonds activation capability on P(VDF‐co‐CTFE). The catalytic activity of Cu(0)/2,6‐bis(imino)pyridines is comparable with Cu(0)/2,2′‐bipyridine under the consistent reaction conditions. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4378–4388     

Synthesis of polymeric core–shell particles using surface‐initiated living free‐radical polymerization

An easy and novel approach to the synthesis of functionalized nanostructured polymeric particles is reported. The surfactant‐free emulsion polymerization of methyl methacrylate in the presence of the crosslinking reagent 2‐ethyl‐2‐(hydroxy methyl)‐1,3‐propanediol trimethacrylate was used to in situ crosslink colloid micelles to produce stable, crosslinked polymeric particles (diameter size ～ 100–300 nm). A functionalized methacrylate monomer, 2‐methacryloxyethyl‐2′‐bromoisobutyrate, containing a dormant atom transfer radical polymerization (ATRP) living free‐radical initiator, which is termed an inimer (initiator/monomer), was added to the solution during the polymerization to functionalize the surface of the particles with ATRP initiator groups. The surface‐initiated ATRP of different monomers was then carried out to produce core–shell‐type polymeric nanostructures. This versatile technique can be easily employed for the design of a wide variety of polymeric shells surrounding a crosslinked core while keeping good control over the sizes of the nanostructures. The particles were characterized with scanning electron microscopy, transmission electron microscopy, optical microscopy, dynamic light scattering, and Raman spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1575–1584, 2007     

Energetic polymer salts from 1‐vinyl‐1,2,4‐triazole derivatives

Energetic polymers salts from 1‐vinyl‐1,2,4‐triazole derivatives have been synthesized via free radical polymerization of 1‐vinyl‐1,2,4‐triazolium monomer salts or by protonation of poly(1‐vinyl‐1,2,4‐triazole) with inorganic or organic acids. Standard enthalpies of formation of the new monomer salts were calculated using the computationally feasible DFT(B3LYP) and MP2 methods in conjunction with an empirical approach based on densities of salts. Compared with the monomer salts, the polymer salts have good thermal properties with high densities > 1.5 g cm^?3. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2414–2421, 2008     

Surfactant‐free synthesis of amphiphilic diblock copolymer in aqueous phase by a self‐stability process

Amphiphilic polymeric particles with hydrophobic cores and hydrophilic shells were prepared via living radical emulsion polymerization of styrene using a water‐soluble poly(acrylamide)‐based macro‐RAFT agent in aqueous solution in the absence of any surfactants. Firstly, the homopolymerization of acrylamide (AM) was carried out in aqueous phase by reversible addition‐fragmentation chain transfer radical polymerization (RAFT) using a trithiocarbonate as a chain transfer agent. Then the PAM‐based macro‐RAFT agent has been used as a water‐soluble macromolecular chain transfer agent in the batch emulsion polymerization of Styrene (St) free of surfactants. The RAFT controlled growth of hydrophobic block led to the formation of well‐defined poly(acrylamide)‐copolystyrene amphiphilic copolymer, which was able to work as a polymeric stabilizer (self‐stability). Finally, very stable latex was prepared, having no visible phase separation for several months. FTIR and ¹H‐NMR measurements showed that the product was the block copolymer PAM‐co‐PS in the form of stable latex. Atomic force microscope (AFM), transmission electron microscope (TEM), and dynamic light scattering (DLS) studies indicated that the nanoparticles have a narrow particle size distribution and the average particle hydrodynamic radius was kept in the diameter of 58 nm. Core‐shell structure of the copolymer was also recorded by TEM. The mechanism of the self‐stability of polymer particles during the polymerization in the absence of surfactants was studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3098–3107, 2008