In Situ Gel‐to‐Crystal Transition and Synthesis of Metal Nanoparticles Obtained by Fluorination of a Cyclic β‐Aminoalcohol Gelator

A new fluorinated version of a cyclic β‐aminoalcohol gelator derived from 1,2,3,4‐tetrahydroisoquinoline is presented. The gelator is able to gel various nonprotic solvents through OH???N hydrogen bonds and additional CH???F interactions due to the introduction of fluorine. A bimolecular lamellar structure is formed in the gel phase, which partly preserves the pattern of molecular organization in the single crystal. The racemate of the chiral gelator shows lower gelation ability than its enantiomer because of a higher tendency to form microcrystals, as shown by X‐ray diffraction analysis. The influence of fluorination on the self‐assembly of the gelator and the properties of the gel was investigated in comparison to the original fluorine‐free gel system. The introduction of fluorine brings two new features. The first is good recognition of o‐xylene by the gelator, which induces an in situ transition from gels of o‐xylene and of an o‐xylene/toluene mixture to identical single crystals with unique tubular architecture. The second is the enhanced stability of the toluene gel towards ions, including quaternary ammonium salts, which enables the preparation of a stable toluene gel in the presence of chloroaurate or chloroplatinate. The gel system can be used as a template for the synthesis of spherical gold nanoparticles with a diameter of 5 to 9 nm and wormlike platinum nanostructures with a diameter of 2 to 3 nm and a length of 5 to 12 nm. This is the first example of a synthesis of platinum nanoparticles in an organogel medium. Therefore, the appropriate introduction of a fluorine atom and corresponding nonbonding interactions into a known gelator to tune the properties and functions of a gel is a simple and effective tactic for design of a gel system with specific targets.     

Energy transfer from a fluorescent hydrogel to a hosted fluorophore

The fluorescent properties of a new 1,3,5-cyclohexyltricarboxamide-based low-molecular-weight hydrogelator (1) derivatized with one hydrophobic fluorophore and two hydrophilic substituents have been investigated. Gels of 1 are composed of long, nonbranched fibers of uniform diameter, as shown by cryo-transmission electron microscopy (cryo-TEM). The aggregation of the naphthalene fluorophore moieties of the gelator molecules in the gel fibers favors the occurrence of a fast energy migration process that allows a very efficient sensitization of the fluorescence of a hosted fluorophore. Such processes have been investigated by the addition of propyldansylamide (PDNS), at two different concentrations, to gels of 1. Around 30% of the total PDNS added to the gels was found to be incorporated in the gel fibers, as confirmed by deconvolution of the fluorescence spectrum, excited-state lifetime measurements, and steady-state and time-resolved fluorescence anisotropy measurements. Moreover, anisotropy measurements show that the fluorophore that is incorporated within the gel fibers is almost completely immobilized, indicating that the interactions of PDNS with the gelator moieties are very strong. This particular configuration of donor (1) and acceptor (PDNS) molecules leads to a very efficient antenna effect, where 50% of the absorbed photons are funneled through to the dansyl derivative when one PDNS molecule is incorporated in the gel fibers for every 100 gelator molecules. A 5-fold higher concentration of PDNS increases the percentage of funneled photons to 75%.     

Construction of Chemical‐Responsive Supramolecular Hydrogels from Guest‐Modified Cyclodextrins

A methodology for preparing supramolecular hydrogels from guest‐modified cyclodextrins (CDs) based on the host–guest and hydrogen‐bonding interactions of CDs is presented. Four types of modified CDs were synthesized to understand better the gelation mechanism. The 2D ROESY NMR spectrum of β‐CD‐AmTNB (Am=amino, TNB=trinitrobenzene) reveals that the TNB group was included in the β‐CD cavity. Pulsed field gradient NMR (PFG NMR) spectroscopy and AFM show that β‐CD‐AmTNB formed a supramolecular polymer in aqueous solution through head‐to‐tail stacking. Although β‐CD‐AmTNB did not produce a hydrogel due to insufficient growth of supramolecular polymers, β‐CD‐CiAmTNB (Ci=cinnamoyl) formed supramolecular fibrils through host–guest interactions. Hydrogen bonds between the cross‐linked fibrils resulted in the hydrogel, which displayed excellent chemical‐responsive properties. Gel‐to‐sol transitions occurred by adding 1‐adamantane carboxylic acid (AdCA) or urea. ¹H NMR and induced circular dichroism (ICD) spectra reveal that AdCA released the guest parts from the CD cavity and that urea acts as a denaturing agent to break the hydrogen bonds between CDs. The hydrogel was also destroyed by adding β‐CD, which acts as the competitive host to reduce the fibrils. Furthermore, the gel changed to a sol by adding methyl orange (MO) as a guest compound, but the gel reappeared upon addition of α‐CD, which is a stronger host for MO.     

Biological Glucose Metabolism Regulated Peptide Self‐Assembly as a Simple Visual Biosensor for Glucose Detection

A glucose oxidase (GOx)‐mediated glucose metabolism was in vitro mimicked and employed to regulate the self‐assembly of peptide‐based building blocks. In this new stimuli‐responsive self‐assembly system, two peptide‐based building blocks, respectively, having aspartic acid (gelator 1 ) and lysine (gelator 2 ) residues were designed and prepared. When adding glucose and GOx to the aqueous solution of gelator 1 or the self‐assembled fibrillar hydrogel of gelator 2 to construct glucose metabolism system, the metabolic product (gluconic acid) can trigger the protonation of the peptide molecules and induce the phase transitions of gelators 1 (sol‐gel) and 2 (gel‐sol). Because this glucose metabolism regulated peptide self‐assembly is built on the oxidation of glucose, it can be used as a simple visual biosensor for glucose detection.     

Amphiphilic Inclusion Spaces for Various Guests and Regulation of Fluorescence Intensity of 1,8‐Bis(4‐aminophenyl)anthracene Crystals

A host framework for inclusion of various guest molecules was investigated by preparation of inclusion crystals of 1,8‐bis(4‐aminophenyl)anthracene (1,8‐BAPA) with organic solvents. X‐ray crystallographic analysis revealed construction of the same inclusion space incorporating 1,8‐BAPA and eight guest molecules including both non‐polar (benzene) and polar guests (N,N‐dimethylformamide, DMF). Fluorescence efficiencies varied depending on guest molecule polarity; DMF inclusion crystals exhibited the highest fluorescence intensity (Φ_F=0.40), four times as high as that of a benzene inclusion crystal (Φ_F=0.10). According to systematic investigations of inclusion phenomena, strong host–guest interactions and filling of the inclusion space led to a high fluorescence intensity. Temperature‐dependent fluorescence spectral measurements revealed these factors effectively immobilised the host framework. Although hydrogen bonding commonly decreases fluorescence intensity, the present study demonstrated that such strong interactions provide excellent conditions for fluorescence enhancement. Thus, this remarkable behaviour has potential application toward sensing of highly polar molecules, such as biogenic compounds.     

Semiconducting Fabrics by In Situ Topochemical Synthesis of Polydiacetylene: A New Dimension to the Use of Organogels

A diyne functionalized 4,6‐O‐benzylidene β‐d ‐galactopyranoside gelator, which can align its diyne motifs upon self‐assembly (gelation) have been synthesized. The organogel formed by this gelator undergoes topochemical polymerization to polydiacetylene (PDA) under photoirradiation. This strategically designed gelator has been used to make semi‐conducting fabrics. By developing the organogel on the fabrics, the gelator molecules were made not only to self‐assemble on the fibers, but also to adhere to fabrics through hydrogen bonding. UV irradiation of the gel‐coated fabric/fiber resulted in the formation of PDA on fibers. The benzylidene motif could be deprotected to get PDA with pendant free sugars that strongly bind to the cotton fibrils through multiple hydrogen bonds. Conductivity measurements revealed the semiconducting nature of these fabrics.     

Fluorescence Dynamics of Monocyclodextrin– and Bis(thiol‐cyclodextrin)–Coumarin C153 Complexes

The solvation and confinement of coumarin C153 within supramolecular host/guest complexes based on β‐cyclodextrin (β‐CD) and 6‐deoxy‐6‐thio‐β‐cyclodextrin (β‐CD‐SH) in water are studied by fluorescence spectroscopy. For β‐CD/C153, the 1:1 complex is proposed, and for β‐CD‐SH/C153 both the 1:1 and 2:1 complexes are believed to be formed. The 2:1 β‐CD‐SH/C153 complex has an association constant of 4.2×10⁵ M ^?1 and a C153 population of 82 %, which are interestingly high values, indicating that the proposed β‐CD‐SH dimers structure are connected by covalent disulfide bonds; this is supported by mass spectrometry. Solvation related to fast hydrogen‐bond rearrangement as a part of fluorescence relaxation is determined by the ultrafast components of time‐resolved spectroscopy to be 3 and 7 ps for the 1:1 β‐CD/C153 and 2:1 β‐CD‐SH/C153 complexes, respectively.     

Phenylboronic Acid Appended Pyrene‐Based Low‐Molecular‐Weight Injectable Hydrogel: Glucose‐Stimulated Insulin Release

A pyrene‐containing phenylboronic acid (PBA) functionalized low‐molecular‐weight hydrogelator was synthesized with the aim to develop glucose‐sensitive insulin release. The gelator showed the solvent imbibing ability in aqueous buffer solutions of pH values, ranging from 8–12, whereas the sodium salt of the gelator formed a hydrogel at physiological pH 7.4 with a minimum gelation concentration (MGC) of 5 mg mL^?1. The aggregation behavior of this thermoreversible hydrogel was studied by using microscopic and spectroscopic techniques, including transmission electron microscopy, FTIR, UV/Vis, luminescence, and CD spectroscopy. These investigations revealed that hydrogen bonding, π–π stacking, and van der Waals interactions are the key factors for the self‐assembled gelation. The diol‐sensitive PBA part and the pyrene unit in the gelator were judiciously used in fluorimetric sensing of minute amounts of glucose at physiological pH. The morphological change of the gel due to addition of glucose was investigated by scanning electron microscopy, which denoted the glucose‐responsive swelling of the hydrogel. A rheological study indicated the loss of the rigidity of the native gel in the presence of glucose. Hence, the glucose‐induced swelling of the hydrogel was exploited in the controlled release of insulin from the hydrogel. The insulin‐loaded hydrogel showed thixotropic self‐recovery property, which hoisted it as an injectable soft composite. Encouragingly, the gelator was found to be compatible with HeLa cells.     

Chiral bis(amino alcohol)oxalamide gelators-gelation properties and supramolecular organization: racemate versus pure enantiomer gelation

Four new chiral bis(amino alcohol)oxalamides (1-4: amino alcohol=leucinol, valinol, phenylglycinol, and phenylalaninol, respectively) have been prepared as low-molecular-weight organic gelators. Their gelation properties towards various organic solvents and mixtures were determined and these were then compared to related bis(amino acid) oxalamide gelators. Spectroscopic (FTIR, (1)H NMR) and X-ray diffraction studies revealed that the primary organization motif of (S,S)-1 and racemate 1 (rac-1) in lipophilic solvents involved the formation of inverse bilayers. The X-ray crystal structure of (S,S)-1 also shows this type of bilayer organization. The crystal structure of rac-2 reveals meso bilayers of hydrogen-bonded aggregates. Within the bilayers formed, the gelator molecules are connected by cooperative hydrogen bonding between oxalamide units and OH groups, while the interbilayer interactions are realized through lipophilic interactions between the iBu groups of leucinol. Oxalamide meso-1 lacks any gelation ability and crystallizes in monolayers. In dichloromethane rac-1 forms an unstable gel; this is prone to crystallization as a result of the formation of symmetrical meso bilayers. In contrast, in aromatic solvents rac-1 forms stable gels; this indicates that enantiomeric bilayers are formed. Oxalamide rac-1 is capable of gelling a volume of toluene three times larger than (S,S)-1. A tranmission electron microscopy investigation of rac-1 and (S,S)-1 toluene gels reveals the presence of thinner fibers in the former gel, and, hence, a more compact network that is capable of immobilizing a larger volume of the solvent. The self-assembly of these types of gelator molecules into bilayers and subsequent formation of fibrous aggregates can be explained by considering the strength and direction of aggregate forces (supramolecular vectors) in three-dimensional space.     

基于偏苯三甲酸与对羟基吡啶复合物的超分子水凝胶

基于偏苯三甲酸和对羟基吡啶合成了一种具有支化结构的凝胶因子,采用氢核磁、红外光谱及元素分析确认其结构.该凝胶因子熔体在冷却时可拉出数厘米的长丝,表明分子间形成了强相互作用.将凝胶因子的水溶液分别在25℃和0℃下自然冷却、以及在25℃的超声作用下冷却,凝胶因子自组装成纤维状网络结构并使水凝胶化,纤维网络的密度及凝胶的稳定性均按上述凝胶形成条件顺序增加.通过干凝胶能谱面扫描分析发现氮元素主要处于纤维内部,表明两亲性凝胶因子对分子自组装的影响.通过分析邻苯二甲酸与对羟基吡啶复合物、偏苯三甲酸的单晶结构表明,凝胶因子基于多种氢键识别作用组装成纤维结构.干凝胶的粉末X射线衍射分析表明在凝胶化过程中凝胶因子沿着特定方向进行组装.     

Remarkable Regioisomer Control in the Hydrogel Formation from a Two‐Component Mixture of Pyridine‐End Oligo(p‐phenylenevinylene)s and N‐Decanoyl‐L‐alanine

N‐Decanoyl‐L ‐alanine (DA) was mixed with either colorless 4,4′‐bipyridine (BP) or various derivatives such as chromogenic oligo(p‐phenylenevinylene) (OPV) functionalized with isomeric pyridine termini in specific molar ratios. This mixtures form salt‐type gels in a water/ethanol (2:1, v/v) mixture. The gelation properties of these two‐component mixtures could be modulated by variation of the position of the ′′N′′ atom of the end pyridyl groups in OPVs. The presence of acid–base interactions in the self‐assembly of these two‐component systems leading to gelation was probed in detail by using stoichiometry‐dependent UV/Vis and FTIR spectroscopy. Furthermore, temperature‐dependent UV/Vis and fluorescence spectroscopy clearly demonstrated a J‐type aggregation mode of these gelator molecules during the sol‐to‐gel transition process. Morphological features and the arrangement of the molecules in the gels were examined by using scanning electron microscopy (SEM), atomic force microscopy (AFM), and X‐ray diffraction (XRD) techniques. Calculation of the length of each molecular system by energy minimization in its extended conformation and comparison with the XRD patterns revealed that this class of gelator molecules adopts lamellar organizations. Rheological properties of these two‐component systems provided clear evidence that the flow behavior could be modulated by varying the acid/amine ratio. Polarized optical microscopy (POM), differential scanning calorimetry (DSC), and XRD results revealed that the solid‐phase behavior of such two‐component mixtures (acid/base=2:1) varied significantly upon changing the proton‐acceptor part from BP to OPV. Interestingly, the XRD pattern of these acid/base mixtures after annealing at their associated isotropic temperature was significantly different from that of their xerogels.     

Self‐Assembled Fibers Containing Stable Organic Radical Moieties: Alignment and Magnetic Properties in Liquid Crystals

Macroscopically oriented stable organic radicals have been obtained by using a liquid–crystalline (LC) gel composed of an l ‐isoleucine‐based low molecular weight gelator containing a 2,2,6,6‐tetramethylpiperidine 1‐oxyl moiety. The LC gel has allowed magnetic measurements of the oriented organic radical. The gelator has formed fibrous aggregates in liquid crystals via intermolecular hydrogen bonds. The fibrous aggregates of the radical gelator are formed and oriented on cooling by applying a magnetic field to the mixture of liquid crystals and the gelator. Superconducting quantum interference device (SQUID) measurements have revealed that both oriented and nonoriented fibrous aggregates exhibited antiferromagnetic interactions, in which super‐exchange interaction constant J is estimated as ?0.89 cm^?1.     

Fibrous Networks with Incorporated Macrocycles: A Chiral Stimuli‐Responsive Supramolecular Supergelator and Its Application to Biocatalysis in Organic Media

A new and versatile, crown ether appended, chiral supergelator has been designed and synthesized based on the bis‐urea motif. The introduction of a stereogenic center improved its gelation ability significantly relative to its achiral analogue. This low‐molecular‐weight gelator forms supramolecular gels in a variety of organic solvents. It is sensitive to multiple chemical stimuli and the sol–gel phase transitions can be reversibly triggered by host–guest interactions. The gel can be used to trap enzymes and release them on demand by chemical stimuli. It stabilizes the microparticles in Pickering emulsions so that enzyme‐catalyzed organic reactions can take place in the polar phase inside the microparticles, the organic reactants diffusing through the biphasic interface from the surrounding organic phase. Because of the higher interface area between the organic and polar phases, enzyme activity is enhanced in comparison with simple biphasic systems.     

Metallogels from Coordination Complexes,Organometallic, and Coordination Polymers

A supramolecular gel results from the immobilization of solvent molecules on a 3D network of gelator molecules stabilized by various supramolecular interactions that include hydrogen bonding, π–π stacking, van der Waals interactions, and halogen bonding. In a metallogel, a metal is a part of the gel network as a coordinated metal ion (in a discrete coordination complex), as a cross‐linking metal node with a multitopic ligand (in coordination polymer), and as metal nanoparticles adhered to the gel network. Although the field is relatively new, research into metallogels has experienced a considerable upsurge owing to its fundamental importance in supramolecular chemistry and various potential applications. This focus review aims to provide an insight into the development of designing metallogelators. Because of the limited scope, discussions are confined to examples pertaining to metallogelators derived from discrete coordination complexes, organometallic gelators, and coordination polymers. This review is expected to enlighten readers on the current development of designing metallogelators of the abovementioned class of molecules.     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

Optically Transparent Hydrogels from an Auxin–Amino‐Acid Conjugate Super Hydrogelator and its Interactions with an Entrapped Dye

Low‐molecular‐weight organic hydrogelators (LMHGs) that can rigidify water into soft materials are desirable in various applications. Herein, we report the excellent hydrogelating properties of a simple synthetic auxin–amino‐acid conjugate, naphthalene‐1‐acetamide of L ‐phenylalanine ( 1‐NapF , M_w=333.38 Da), which gelated water even at 0.025 wt %, thereby making it the most‐efficient LMHG known. Optically transparent gels that exhibited negligible scattering in the range 350–900 nm were obtained. A large shift from the theoretical pK_a value of the gelator was observed. The dependence of the minimum gelator concentration (MGC) and the gel‐melting temperatures on the pH value indicated the importance of H‐bonding between the carboxylate groups on adjacent phenylalanine molecules in the gelator assembly. FTIR spectroscopy of the xerogels showed a β‐sheet‐like assembly of the gelator. Variable‐temperature ¹H NMR spectroscopy demonstrated that π stacking of the aromatic residues was also partly involved in the gelator assembly. TEM of the xerogel showed the presence of a dense network of thin, high‐aspect‐ratio fibrillar assemblies with diameters of about 5 nm and lengths that exceeded a few microns. Rheology studies showed the formation of stable gels. The entrapment of water‐soluble dyes afforded extremely fluorescent gels that involved the formation of J‐aggregates by the dye within gel. A strong induced‐CD band established that the RhoB molecules were interacting closely with the chiral gelator aggregates. H‐bonding and electrostatic interactions, rather than intercalation, seemed to be involved in RhoB binding. The addition of chaotropic reagents, as well as increasing the pH value, disassembled the gel and promoted the release of the entrapped dye with zero‐order kinetics.     

Gelation of a Highly Fluorescent Urea‐Containing Triarylmelamine Derivative: 2,4,6‐Tris(p‐N′‐Octadecylureido‐Anilino)Triazine in Organic Solvents

A new gelator of urea‐containing triazine derivatives was synthesized and tested in order to explore the gelation potential in different organic solvents. This compound has been found to form organogels with a variety of organic solvents such as decalin and other solvents. The resulting thermo‐reversible gel was characterized by using the dropping ball method and a number of other instruments. The melting temperature of the gel increased with the gel concentration. The intermolecular hydrogen bonding of gelation was demonstrated through an FT‐IR spectrometer. UV‐Vis and fluorescence analysis showed that the gel displayed various optical effects in different organic solvents. The blue fluorescence of the gel in decalin and the quenched effect of gel in CHCl³ were displayed, respectively. Morphological features in decalin and CHCl₃ were studied by applying atomic force microscopy (AFM), and the morphological features demonstrated that there were different aggregations in different solvents. In conductivity electrolyte experiments, the organogel electrolytes indicated high conductivity (σ) comparable to the corresponding NaClO₄/THF solution. The conductivity of gel electrolytes was increased with electrolyte salt.     

Effect of Guest–Host Hydrogen Bonding on the Structures and Properties of Clathrate Hydrates

To provide improved understanding of guest–host interactions in clathrate hydrates, we present some correlations between guest chemical structures and observations on the corresponding hydrate properties. From these correlations it is clear that directional interactions such as hydrogen bonding between guest and host are likely, although these have been ignored to greater or lesser degrees because there has been no direct structural evidence for such interactions. For the first time, single‐crystal X‐ray crystallography has been used to detect guest–host hydrogen bonding in structure II (sII) and structure H (sH) clathrate hydrates. The clathrates studied are the tert‐butylamine (tBA) sII clathrate with H₂S/Xe help gases and the pinacolone + H₂S binary sH clathrate. X‐ray structural analysis shows that the tBA nitrogen atom lies at a distance of 2.64 Å from the closest clathrate hydrate water oxygen atom, whereas the pinacolone oxygen atom is determined to lie at a distance of 2.96 Å from the closest water oxygen atom. These distances are compatible with guest–water hydrogen bonding. Results of molecular dynamics simulations on these systems are consistent with the X‐ray crystallographic observations. The tBA guest shows long‐lived guest–host hydrogen bonding with the nitrogen atom tethered to a water HO group that rotates towards the cage center to face the guest nitrogen atom. Pinacolone forms thermally activated guest–host hydrogen bonds with the lattice water molecules; these have been studied for temperatures in the range of 100–250 K. Guest–host hydrogen bonding leads to the formation of Bjerrum L‐defects in the clathrate water lattice between two adjacent water molecules, and these are implicated in the stabilities of the hydrate lattices, the water dynamics, and the dielectric properties. The reported stable hydrogen‐bonded guest–host structures also tend to blur the longstanding distinction between true clathrates and semiclathrates.     

Fluoride-responsive gelator and colorimetric sensor based on simple and easy-to-prepare cyano-substituted amide

A new and easy-to-prepare gelator based on cyano-substituted amide (BPNIA) was designed and synthesized. BPNIA could form thermoreversible gel in DMSO-H(2)O (v/v, 9?:?1) and ultrasound-stimulated gel in DMSO. FT-IR, UV-vis and XRD spectra indicated that the gelator molecules self-assemble into a fibrous network resulting from the cooperation of intermolecular hydrogen bonding, π-π stacking and cyano interactions. BPNIA can act as a highly selective colorimetric sensor for fluoride in DMSO, overcoming the interference of H(2)PO(4)(-), AcO(-) and other halide anions. The deprotonation of the NH groups is responsible for the dramatic color change from colorless to yellow. Interestingly, the organogel of BPNIA could allow a two channel fluoride response by proton controlled reversible sol-gel transition and color changes.     

(R)‐12‐Hydroxystearic Acid Hydrazides as Very Efficient Gelators: Diffusion,Partial Thixotropy,and Self‐Healing in Self‐Standing Gels

The gelation properties of derivatives of N‐alkylated (R)‐12‐hydroxystearic acid hydrazide (n‐HSAH, n=0, 2, 6, 10; n is the length of an n‐alkyl chain on the terminal nitrogen atom) in a wide variety of liquids is reported. The n‐HSAH compounds were derived from a naturally occurring alkanoic acid, (R)‐12‐hydroxystearic acid (R‐12HSA), and although they differ from the analogous N‐alkyl (R)‐12‐hydroxystearamides (n‐HSAA) only by the presence of one N?H group, their behavior as gelators is very different. For example, the parent molecule (0‐HSAH) is a supergelator in ethylene glycol, in which it forms self‐standing gels that are self‐healing, partially thixotropic, moldable, and load‐bearing; gels of 0‐HSAA are not self‐standing. 0‐HSAH is structurally the simplest molecular gelator of which we are aware that is capable of forming both self‐standing and partially thixotropic gels. Also, diffusion of the cationic dye erythrosine B and the anionic dye methylene blue in 0‐HSAH/ethylene glycol gel blocks is much slower than the self‐diffusion of ethylene glycol. Polarizing optical microscopy, X‐ray diffraction, and FTIR studies revealed that the self‐assembled fibrillar networks (SAFINs) of the gels are crystalline, and that 0‐HSAH molecules may be arranged in a triclinic subcell with bilayer stacking. The SAFINs are stabilized by strong hydrogen‐bonding interactions between the hydrazide groups of adjacent molecules and a perpendicular hydrogen‐bonding network between the pendent hydroxyl groups of 0‐HSAH. The other n‐HSAH (n=2, 6, 10) molecules appear to be arranged in orthorhombic subcells with monolayers and strong hydrogen‐bonding interactions between the hydrazide group of one gelator molecule and the hydroxyl group of a neighboring one. These results show how small structural modifications of structurally simple gelator molecules can be exploited to form gels with novel properties that can lead potentially to valuable applications, such as in drug delivery.